I'm not receiving emails from 2 specific domains to my .mac email. Both have the correct address and I don't have any rules set up. Anyone know why this is happening?
I'm not receiving emails from 2 places. I don't have rules set up and both senders have the correct address. The messages aren't in my junk folder either. This is for my.mac account. Anyone know how to fix?
That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
Check Mail -> Preferences -> Viewing -> Show header detail
I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.
Similar Messages
-
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer. -
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening?
You posted in the OS 9 & below forum. What OS X version are you using? What model Canon printer? Canon printers have a test print capability (open the Printer Utility). What happens when you do a test print? Are all the printer cartridges in their proper location? Sometimes when you print "black", the printer uses a mixture of the colors to get "black". In the Printer Utility, check the levels of the other cartridges. There may be one color that is clogged.
Cheers, Tom -
I have the new IPad and am using it with the verizon mifi2200 wireless and when i am using apps the location services cannot find me wifi is working and location services is on this does not happen when i am using a wifi that is at my office or in hotels does anyone know anything about this because verizon dosn't?
iOS 5: Understanding Location Services
http://support.apple.com/kb/ht4995
Cheers, Tom -
Why won't the PPt show when I am trying to record and video tape a PPt presentation on Panopto?
Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example. -
I was checking calendar entries in January and some have disappeared. I tried to re-enter them but they also disappear after a few seconds. I have looked for conflicting entries but here is nothing obvious. My iPad was new in January so these are the original entries I made. No idea what to try next.
Hi Friend,
Check if Restrictions is turned off;
Go to Settings>Mail,Contacts,Calendars>Calendars>Sync, then be sure all events is marked.
Hope it helps -
I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn
I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.
-
Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?
Clean any debris from the adapter, docking station connector and the connector on the Nano.
-
i WOULD LIKE TO BUY SOMETHING FROM THE ITUNES STORE AND I DON'T HAVE THE ANSWERS TO MY SECURITY QUESTIONS?
You need to contact Apple to get the questions reset, which can be done by clicking here and picking a method for your country, or if that's not an option, by filling out and submitting this form.
(95939) -
My iPad 2 does not say software update between about and usage in general setting anyone know why this any help welcome thanks
Keith. Look in settings, general, about. About halfway down the screen is an entry labeled version. If it is anything lower than 5.0, then you wil not get wireless updates. You need to plug your pad into your computer that you set it up with which is running the current version of I tunes to get the update.
When you plug it in to i tunes, be sure to do a backup. Also, the machine will ask if you want to transfer purchases. Tell it yes. This saves your content and purchased apps and music to your iTunes on the computer. When you do the software update, it will then reload that material onto your pad.
If you have taken any pictures on your pad, be sure to upload those to I photo, or whatever photo library you are using so that they are not lost when you do the upgrade.
Once you get to the current version, any future software updates can be done over the air, not requiring you to use the computer. That feature was enabled with version 5. But it is a good idea to do backup and syncs with your computer from time to time. -
My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?
Hey Dr kris,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M. -
ibooks author is continuously deleting pages from my book until i'm left with nothing, does anyone know why this is or have the same problem?
What are you doing BEFORE the pages start deleting?
-
On my I Pad I am getting a message tha says "Your Apple ID has been disabled". Nothing else. I have not tried to log in so I don't know why this is happening. How do I get it enabled?
Read the article you linked.
If changing your password does not resolve, then contact itunes support
Maybe you are looking for
-
Help! This new version of Lion is making me miserable. The fan runs constantly, the computer is hot and battery life has dropped to under 2 hours on a fully charged battery. I updated yesterday, nothing but misery today. Even running the mail program
-
I am following a flash from to database via asp tutorial. When I try to test the asp code in the browser I get this message. "You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be
-
Can someone explain the logic...?
I have two questions... 1. How do I get back to the "factory settings" for the server environment? I was playing around with settings and somehow now the default website on the server is looking at /var/empty instead of /Library/Server/Web/Data/Sit
-
mackeeper has detected a virus in the time capsule backup, it is not possible to delete the infected file. Do I mount time capsule in finder and then consign to junk the whole computer backup then create a fresh backup? Is that the only solution plea
-
Why is Lightroom 5.3 corrupting my RAW files?
Running on my MacBook Pro OS X 10.7.5, sporadic RAW files are now being corrupted between the time I 'Backup LR' at day's end shutdown, and then open LR the next day to continue working. A RAW image file that was perfect the day before, now appears