I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

Zap the PRAM and Reset the SMC, then try again.

Similar Messages

  • I'm trying to upgrade from 10.5.8 to Snow Leopard

    I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.".  Isn't Snow Leopard 10.6?....so now what?

    It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • Trying to upgrade from 10.5.8 to snow leopard. It says I cannot use my current version of Installer

    It says I cannot use my current version of Installer. How do I get around this. Auto updates are current.

    Hi, is this a Gray Machine specific Disc from a different model?
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • It's been a while since I upgraded my system.  Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files?  The transition should be pretty seamless, right?

    It's been a while since I upgraded my operating system.  Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files?  The transition should be pretty seamless after installation, right?

    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

    y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

    Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

  • When I upgrade from OS10.5.8 to Snow Leopard will all my data transfer.  If I need to back up what is the best way to do this?

    I plan to upgrade from OS10.5.8 to Snow Leopard. Will all my data, applications and settings transfer automatically?
    If I need to back up what is the best way to do this?

    If everything works perfectly, your data should not be touched.
    Personally I never trust my data to everything working perfectly.
    I always backup everything twice at least.

  • Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?

    Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?
    I would appreciate any advice on the intricacies of operating with Snow Leopard on my main computer and Mountain Lion on my MacBook Air.

    I'm not sure there are any intricacies except you can't use iCloud to keep the two things synced. It would be mostly contacts, Safari bookmarks, Calendars, notes, etc.
    Also, iCloud allows saving iWork documents in the Cloud, so you can access them on both systems. That would not be available for the old Mac.
    The two OSes are similar enough that it wouldn't be too difficult to work between the two, but there will be differences in using the Finder (contextual menu changes)
    I thought I would have more, but I've been off Snow Leopard for so long now, I'll leave this for someone who is currently operating like that or recently switch to Mountain Lion from SL.

  • I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and instal

    I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and installed all the drivers. restarted computer and it is still doing the same thing.  Cant find any costumer service here either except forums.

    I have exactly the same problem - Whenever I go to Print, the print widow appears, it thinks about it for a bit (rotating symbol) and then quits.
    This is the beginning of the problem details, cut and paste. It goes on much longer than this:
    Process:               Adobe Photoshop CS5 [786]
    Path:                  /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
    Identifier:            com.adobe.Photoshop
    Version:               12.0 (12.0x20100407.r.1103] [12.0)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Photoshop CS5 [786]
    User ID:               502
    Date/Time:             2015-02-01 10:56:19.422 +0000
    OS Version:            Mac OS X 10.10.2 (14C109)
    Report Version:        11
    Anonymous UUID:        C0191A3D-714A-8117-8061-9291955759D1
    Sleep/Wake UUID:       B201F1B6-486D-4D70-B99A-E4F89B024BBF
    Time Awake Since Boot: 5600 seconds
    Time Since Wake:       240 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGBUS)
    Exception Codes:       KERN_PROTECTION_FAILURE at 0x00007fff789d1e70
    VM Regions Near 0x7fff789d1e70:
        __DATA                 00007fff78986000-00007fff7898b000 [   20K] rw-/rwx SM=COW  /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Ve rsions/A/libLAPACK.dylib
    --> __DATA                 00007fff7898b000-00007fff789e1000 [  344K] rw-/rwx SM=COW  /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        __DATA                 00007fff789e1000-00007fff789e6000 [   20K] rw-/rwx SM=COW  /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                           0x00007fff789d1e70 OBJC_CLASS_$_NSMutableArray + 0
    1   com.apple.print.framework.PrintCore 0x00007fff95693021 PMRelease + 43
    2   com.adobe.Photoshop           0x0000000100c237cf AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9727123
    3   com.adobe.Photoshop           0x0000000100c23e7d AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728833
    4   com.adobe.Photoshop           0x0000000100c23eb7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728891
    5   com.adobe.Photoshop           0x0000000100c23da5 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728617
    6   com.adobe.Photoshop           0x0000000100aee053 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8459543
    7   com.adobe.Photoshop           0x0000000100768c64 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 4768040
    8   com.adobe.Photoshop           0x0000000100af067e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8469314
    9   com.adobe.Photoshop           0x0000000100af0be9 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8470701
    10  com.adobe.Photoshop           0x0000000100af1295 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8472409
    11  com.adobe.Photoshop           0x000000010007bbdc 0x100000000 + 506844
    12  com.adobe.Photoshop           0x00000001000d6a7e 0x100000000 + 879230
    13  com.adobe.Photoshop           0x00000001000d6a9e 0x100000000 + 879262
    14  com.adobe.Photoshop           0x0000000100066eb1 0x100000000 + 421553
    15  com.adobe.Photoshop           0x0000000100071d74 0x100000000 + 466292
    16  com.adobe.Photoshop           0x000000010006716f 0x100000000 + 422255
    17  com.adobe.Photoshop           0x0000000100067232 0x100000000 + 422450
    18  com.adobe.Photoshop           0x00000001012f0007 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16856267
    19  com.apple.AppKit               0x00007fff8d77c608 -[NSApplication run] + 711
    20  com.adobe.Photoshop           0x00000001012ee19c AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16848480
    21  com.adobe.Photoshop           0x00000001012ef3c7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16853131
    22  com.adobe.Photoshop           0x0000000100068e82 0x100000000 + 429698
    23  com.adobe.Photoshop           0x0000000100238308 0x100000000 + 2327304
    24  com.adobe.Photoshop           0x00000001002383a7 0x100000000 + 2327463

  • Upgrade from 10.4.11 to Snow Leopard without Leopard?

    I'm trying to upgrade from OS X 10.4.11 to Snow Leopard. (At this point it's been such a headache that I don't even care about Lion.) If I've read correctly, I need to first upgrade to OS X 10.5 Leopard. The only problem is that I can't seem to find it anywhere on the Apple site. I even searched for the Mac Box Set that included Leopard, Snow Leopard, and iLife and can't find it either. I went to an Apple store today and they didn't even Snow Leopard on the shelf. Anyone know how I can get from 10.4.11 to Snow Leopard? Do I still need to go to Leopard first? I tried looking at the requirements/tech specs for the Snow Leopard install disc in the online store, but that link takes me straight to the tech specs for Lion. Any help would be greatly appreciated!

    Hello,
    If I've read correctly, I need to first upgrade to OS X 10.5 Leopard.
    You read correctly, but that info isn't correct, if your Mac can hadle 10.6 then the $29 Disc will install on 10.4.x...
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they do still have Snow Leopard:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

  • IMac upgrade from 10.5.8 to Snow Leopard

    Can I upgrade my system from 10.5.8 to Snow Leopard?
    Here are my system specs:
    Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
    Grateful for any tips (I'm backing up right now!)

    Many thanks for your responses.
    I bought the Snow Leopard DVD from the App Store (AU$20.99), it arrived in 24-48hrs and the install was a breeze.
    First, I backed up to an external hard drive with Time Machine, in case of any mishaps (this took a couple of hours). It took about an hour for the initial Snow Leopard install and then another 30 mins or so for the Mac OS X 10.6.8 Update Combo to upload (available online through software updates).
    I was able to update both my iMac and MacBook from the same disk.
    Now, my EyeTV Diversity is running well (the original reason for thinking about an upgrade) and I'm happy to be back in the land of serviced operating systems!

  • Trying to update from 10.4.11 to snow leopard, the genius bar said I should be able to do this I only need 1 GB of RAM and I have 2 GB. I put in the SL disc and my Macbook pro spits it out. What do I do without needlessly spending more money to upgrade?

    So this disc won't load. I recently bought a new ipod nano, but am unable to put songs on it without the latest version of itunes.
    My Macbook Pro is 2008 and has 10.4.11 the guys at the genius bar said to upgrade to snow leopard to upgrade to lion and I shouldn't have a problem. I was told I need 1GB of RAM and I have 2GBs of RAM but the disc spits out every time after about 3 minutes.
    This is my computer info, please please please help me install this disc so I can use this ipod I bought from you that I've been super psyched about using.
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per processor):          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBP31.0070.B07
      SMC Version:          1.16f11
      Serial Number:          W8******X92
      Sudden Motion Sensor:
      State:          Enabled
    I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.

    MAshmen wrote:
    disc so I can use this ipod I bought from you that I've been super psyched about using.
    I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.
    You didn't buy anything from us.
    These forums are user-to-user; no Apple staff are involved other than to moderate.
    Meanwhile, I refer to you to X423424X's post.

  • Trying to upgrade from Tiger 10.4.11 to Leopard?

    My cousin just purchased the white, 13" Macbook - that of course came with Leopard install disks. I tried to install them on my 17" Macbook Pro that I purchased around the beginning of 2007, with no luck. Does anyone know what the reason is for it not working for me?
    Help would be appreciated, thanks.
    -Kristi

    Does anyone know what the reason is for it not working for me?
    Those disks are only licensed for and compatible with the computer that shipped with them. You need to purchase a retail Mac OS X 10.5 package to upgrade.
    (40273)

  • Upgrading from Tiger 10.4 to Snow Leopard

    Alright, so i reformatted and erased my hard drive and tried installing Snow Leopard but it says "this computer doesn't have enough RAM"...
    AFTER i cleaned it out. and now it won't let me eject the disc or get out of the installation screen..
    it says to restore my system with time machine.. but i don't have time machine or any backups.
    but under my hard drive settings it says:
    space Available: 79.45 GB
    Used: 229.7 MB
    i don't know what to do..

    You should also read the section in the right column titled - *Upgrading from Mac OS X v10.4 Tiger.*
    Don't confuse the technical or licensing requirements with Apple's buying suggestion that Tiger users should purchase the Box Set. The Snow Leopard DVD & the license to use it are the same whether they come as part of the Box Set or as the OS-only retail product. Neither one requires anything special of Tiger users aside from the general & feature-specific technical requirements.
    Specifically, make sure the Black 2006 MacBook has a minimum of 1 GB of installed memory since most of the "Early 2006" ones came with only 512 MB (½ GB) installed.

  • Please help upgrade from 10.4.11 to snow leopard

    Hello. I have a client that is having trouble using a web based email I set up for him (Open Xchange). I wasn't having the same problems on my end, so I asked what he was running. It is a macbook 2.16ghz from mid 2007 and he's running 10.4.11.
    I would like to upgrade him to snow leopard, but I'm having a hard time trying to find it. I found an upgrade on download.com but not sure it will work since I believe it requires leopard which is another one I can't find. I tried the apple site with no luck and I would feel better getting it from them since I'm doing this to someone else's computer.
    Once I get it I read it's best to do a clean install, but for now if someone can tell me what's best I'd appreciate it. Do leopard then snow leopard or direct to snow leopard?
    I have an older copy of snow leopard myself, will that work? I purchased it separately--didn't come with computer.
    Thanks!
    2.16GHz MacBook mid 2007 white
    (MB062LL/A)
    cores : 2
    L2 cache(per processor) 4 MB
    Memory : 2 GB

    It will be an Actual CD.
    Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
    By far the easiest way to make such a Backup, is to use something like
    SuperDuper  http://www.shirt-pocket.com/
    or CCC  http://www.bombich.com/
    That way, should anything untoward happen during the Upgrade,
    you will NOT LOSE ANYTHING.
    (Get an EHD that is at least equal to your current Drive...)

  • Upgrading from 10.4.11 to Snow Leopard - Questions needing answers..

    Hello,
    I am currently running Tiger, 10.4.11 on my MacBook and want to get it up to current Snow Leopard. My laptop is about 4 years old now and need to know if I can upgrade it.
    Secondly I tried to install it with the Leopard system software I received with with my Mac Pro and when I started the install it hang for about 30 seconds and then I got an error message to inform me I could not install that version of OSX on my computer. Did this happen because I was trying to install it with a disc that came with another mac or simply it isn't possible to upgrade anymore? I would be surprised if the laptop is no longer upgradable. Is the problem memory?
    Do I need to buy the Leopard software and will it work.
    Look forward your replies.
    Cheers
    Sophia

    Did this happen because I was trying to install it with a disc that came with another mac
    Yes.
    Do I need to buy the Leopard software and will it work.
    Check the OS's system requirements prior to purchasing it.
    (57357)

Maybe you are looking for