I need help getting my nano to work with my mac!

I just got a mac for christmas, and I would like to get all of my music on to my mac. when i try and sync, it will not work. I want all of my songs to go into I tunes, so that this can become my new i-tunes computer. I have a nano. Can anyone help me with thiss???

If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
http://docs.info.apple.com/article.html?artnum=300173

Similar Messages

Need help getting Apple Extreme to work with Be box

Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
Any help would be very appreciated.
Thanks.

Hello Orang Hutan. Welcome to the Apple Discussions!
What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
o Connect it directly to the Be Box wireless router via Ethernet, or
o Connect it wirelessly to the Be Box's wireless network?
If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

I need help getting my Intuos5 to work with Flash CS6

Can someone give me some help with this? I can't find a single thing on Google that helps me.
I installed Adobe Flash CS6 recently and I have been using my Intuos5 Large for a long time now with Photoshop CS6. The thing is, with Photoshop, it took forever to get working properly. It turned out that I needed to use the 64-bit version because my 64-bit system and tablet drivers won't work with 32-bit Photoshop.
Concerning Flash, it's the same problems as Photoshop. It refuses to recognize my tablets functions such as pressure and tilt sensitivity. It also has an annoying lag or lack of response if I do small, quick strokes. I would switch Flash to 64-bit mode, but there isn't one. I can't find the little stroke-like icon in Flash to turn on sensitivity either. I'm really confused. I've tried it with Flash CS5.5 and it's the same thing.
That's my issue, and I have tried restarting the software and rebooting many times as well. There doesn't seem to be much for options. This all leads to it probably being a 64-bit and 32-bit compatability issue
I'm running Windows 7 with more than enough power to maintain Flash CS6. It is possible that I may need to update my tablet driver since I did for Photoshop CS6, but it was a pain in the *** getting Photoshop to work until I used 64-bit mode. I may need additional files to mod the software.
I would really appreciate the help so I can begin to learn animation. It's my passion. Thanks, in advance.
Here are my relevant specs:
System Information
Time of this report: 9/4/2012, 01:32:48
       Machine name: LAPPY_TOPPY
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite L675
               BIOS: Phoenix SecureCore Version 2.30
          Processor: Intel(R) Core(TM) i5 CPU       M 450 @ 2.40GHz (4 CPUs), ~2.4GHz
             Memory: 4096MB RAM
Available OS Memory: 3954MB RAM
          Page File: 2016MB used, 5890MB available
        Windows Dir: C:\windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 64bit Unicode
Display Devices
          Card name: ATI Mobility Radeon HD 5650
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x68C1)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD001179&REV_00
     Display Memory: 2735 MB
   Dedicated Memory: 1014 MB
      Shared Memory: 1721 MB
       Current Mode: 1600 x 900 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: unknown
         Monitor Id: LGD01CA
        Native Mode: 1600 x 900(p) (60.080Hz)
        Output Type: Internal

If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
http://docs.info.apple.com/article.html?artnum=300173

Need help getting LCD monitor to work with G4 GeForce4 MX

I have a G4 that I haven't been using and want to get running again. It has a Nvidia GeForce4 MX video card. I had a huge CRT monitor and want to use a ViewSonic VX1935wm which I got a deal on. When I hook the monitor up it says that the resolution is out of range.
I can boot with my old monitor and change the connection and then get the LCD to work but only at certain resolutions.
Do I need to get a new video card, or can I get an adaptor? What kind of card should I get if it needs to be replaced? Or what other kind of monitor would be supported by this video card?
Here is the webpage for this monitor: http://www.viewsonic.com/products/lcddisplays/xseries/vx1935wm/

thanks for the links.
switchResX does something, but it doesn't solve the problem. i can now switch to the "optimum" resolution of 1440x900, 60hz. but when i restart the computer, it still won't work! i continue to get the "out of range" message and have to boot with my crt and then switch cables to do anything. also, the fonts in the finder menus look terrible, you can see the jagged lines.
displayConfigX won't let me test that high of a resolution without registering the product.. needless to say, i don't want to pay money if the results are going to be the same as with SwitchResX.
I sent an e-mail to ViewSonic support. Is it typical to have these problems? I am getting more and more confused as I learn more about this.

Need help getting filezilla ftp to work with a windows server

Trying to connect to a windows based server through FTP, I've downloaded Filezilla when I launch it takes several minutes to ask me for a address and username... I input but nothing happens. I would like to use MAC ftp option but I'm not sure it works upstream like I want it to...
Please Help.
J.
Message was edited by: MindBlendMedia

This doesn't appear to have anything to do with Apple Remote Desktop, Apple's application for managing networked Macs, so this probably isn't the most appropriate forum for this question. I'd suggest you ask in the Mac OS X 10.4 Networking forum; you'll be more likely to get a quick and accurate answer there.
Regards.

HT4241 I need help getting my converter to work with my Phillips LCD TV. Anyone have any suggestions?! I have Mini-DP to HDMI converter.

I bought the adapter several months ago, and I've just now had the opprotunity to use this. I'm open to all suggestions! Please help if you can!

Hold the Option key down as you click the sound icon on the menubar. Select the output device for sound there or in System Preferences > Sound > output tab.
Regards,
Captfred

I need help getting my printer to work

I need help getting my printer to work

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I need help getting this program to work.

K. I don't pay much attention in my AP Comp Science Class.. but my teacher said if i can get this program to work i get an a for the semester... The program is Metrowerks Codewarrior IDE.. we are running it on windows 98 i think. She said she can't get it to compile.. so i guess it just needs to be able to input simple java programs (i.e. loops, just the regular crap) and compile them and run them...i have no clue what is wrong with it.. it could just need a patch...or we may just be going about it the wrong way...any help would be SUPER appreciated...

K. I don't pay much attention in my AP Comp Science
Class.. but my teacher said if i can get this programYou better did.
to work i get an a for the semester... The program is
Metrowerks Codewarrior IDE.. we are running it on
windows 98 i think. She said she can't get it toAtleast be sure of the OS.
compile.. so i guess it just needs to be able to
input simple java programs (i.e. loops, just the
regular crap) and compile them and run them...i have
no clue what is wrong with it.. it could just need aEven we don't.
patch...or we may just be going about it the wrong
way...any help would be SUPER appreciated...Nothing in your thread really speaks of the problem. And since you mentioned homework, there's hardly anyone to be interested in that.
Regards
***Annie***

Need help getting this code to work

I am trying to get this code to work using "if else statment" but it will only do the first part and not do the second part in the else statement. Can anyone help me out? Here is the code:
var R1 = this.getField("Registration Fees1");
var R2 = this.getField("Registration Fees2");
var R3 = this.getField("Registration Fees3");
var R4 = this.getField("Registration Fees4");
var R0 = 0
if (R0 == 0)
event.value = Math.floor(R1.value);
else
event.value = Math.floor(R2.value + R3.value + R4.value);
I did notice that if I fiddled around this this part:
if (R0 == 0)
sometimes I can get the second part to work but not the first. I need it to do either or and this is getting frustrating.
I might also not even need "var R0 = 0". I put that there for the condition part. If that is what is causing the problem, I can take it out. But then what would the condition be? For this form, the default is 0 and then the calculation follows by user clicking on different prices. The first part is if they want to pay for the full conference and the second part is if they want to pay for either Monday, Tuesday or Wednesday or 2 of the 3 days. Is it possible to get this to work with both parts together? I am still stuck on getting just one or the other working. Any help would be greatly appreciated. Thanks in advance.

I have posted this on another message board and a user by the name of gkaiseril offered this solution but it hasn't worked either.
// all four days
var R1 = this.getField("Registration Fees1").value;
// Monday
var R2 = this.getField("Registration Fees2").value;
// Tuesday
var R3 = this.getField("Registration Fees3").value;
// Wednesday
var R4 = this.getField("Registration Fees4").value;
var Fee = 0
event.value = ''; // default value
if (R1 != 'Off') {
Fee = Number(R1) + Fee;
} else {
if(R2 != 'Off') {
     Fee = Number(Fee) + R2;
if(R3 != 'Off') {
     Fee += Number(R3);
if(R4 != 'Off') {
     Fee = Number(R4) + Fee;
event.value = Fee;

Need to get wireless remote to work with Flash Presentation... HELP!!!

I know almost nothing about Flash or Powerpoint. I was given a Flash presentation I need that I'd like to show at meetings using my new wireless remote, but I can't get it to move forward & backward between slides (works fine using arrow keys on the laptop keyboard - Windows XP Pro). The remote works fine with Powerpoint presentations, so I know the remote is ok. Is there some setting/command I need to allow my Flash presentation to work with my remote, or do I need a special remote? I already talked to the remote tech support (Keyspan/TrippLite) and they were totally unfamiliar wirh Flash and simply said that their unit works with Powerpoint as advertised, which was true, but they couldn't help me with Flash presentations. Can anyone out there help me?? Thanks very much!

Ok, I'm officially retarded. I followed the link you gave me, which led to another link about fullscreening (a .zip file) which I decompressed and ran then escaped out of it. I then looked at the gobbledygook programming language code and I found where it said "trapallkeys" but still haven't the slightest idea how to get my remote to work. Is there some utility file which I can run which already has this "trapallkeys" function compiled into a nice simple executable that I can run prior to or in conjunction with my Flash presentation which will let my wireless remote controller flip through my slides? I'm sorry, but please don't expect me to understand what...
package
import flash.display.Sprite;
import flash.display.StageDisplayState;
import flash.display.StageScaleMode;
import flash.events.KeyboardEvent;
import flash.events.MouseEvent;
import flash.ui.Keyboard;
import flash.system.fscommand;
public class FullscreenDemo extends Sprite
public function FullscreenDemo():void
fscommand("trapallkeys", "true");
stage.showDefaultContextMenu = false;
stage.displayState = StageDisplayState.FULL_SCREEN;
stage.scaleMode = StageScaleMode.SHOW_ALL;
stage.addEventListener(KeyboardEvent.KEY_DOWN, onStage_KEY_DOWN);
quitScreen_mc.visible = false;
quitScreen_mc.yesBtn_mc.addEventListener(MouseEvent.CLICK, onQuitYes_CLICK);
quitScreen_mc.noBtn_mc.addEventListener(MouseEvent.CLICK, onQuitNo_CLICK);
quitScreen_mc.yesBtn_mc.buttonMode = true;
quitScreen_mc.noBtn_mc.buttonMode = true;
function onStage_KEY_DOWN(evt:KeyboardEvent):void {
if (evt.keyCode == Keyboard.ESCAPE) {
quitScreen_mc.visible = true;
function onQuitYes_CLICK(evt:MouseEvent):void {
fscommand("quit");
function onQuitNo_CLICK(evt:MouseEvent):void {
quitScreen_mc.visible = false;
means. That may be all I need to solve my problem, but it's in a language I just don't understand. Could you or somebody out there please break this down for a newbie?? Thanks very much! :-) :-)

I need help getting Mini Bridge to work in PS CS6

I have already tried deleting the folder and rebooting the computer, I have tried creating a new user account, I have tried uninstalling and reinstalling the entire package and I cannot get Mini Bridge to work at all. It just keeps going to "Mini Bridge waiting for Bridge CS6..." and then never finds anything. I am having this issue on both my Macbook Pro Retina 15 and my MacBook Pro 13 (Early 2011 model). I cannot seem to find any other solutions to this problem online. I also made sure that both Macbooks are fully updated as well as all CS6 software titles. Please help me fix this!
I also made sure I added it to the exceptions list in the firewall too.

Moving the discussion to PS forum
You can also follow the solution suggested in http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
they may help

Need help getting my MacBook to work a with a D-Link print server

I'm trying to set up my MacBook Pro running OS X Ver 10.4.11 to print to a HP PSC 2210 All in One printer attached to a D-Link DP-301U print server. I'm actualy a Windows user and set this up and it works fine on the Windows side. My brother in law here is the Mac user and I can't seem to get this going.
I did install Gimp Print Ver 4.2 and the printer is listed as a support device at their website. But, the printer model doesn't appear in the list when I try and add the IP printer. I did try a LaserJet 4l driver and DeskJet 860c - they don't work. In the print queue, the status says "Network host '<IP address of D-Link> is busy; will retry in 30 seconds."
Any ideas? D-Link support was horrible, claiming that they don't support Macs - despite what it says on the box.
Any insights on next steps would be appreciated.
TIA

Thanks, Greg. GutenPrint lists it as a supported printer but as I said, I don't see it. I'll try the other site.
There is some stuff on Macs at teh D-Link site, but its not verry useful. But, re: the queue, name it appears to me that the PS-<servername>-P1 convention comes from a print server with a parallel interface and this is the LPT port name. This is a USB printer and that's why we get the PSC2210 name which I think is the Windows name I gave the Printer. At any rate, the D-Link doc claims that you should leave the queue name blank for a single port server. I beleive that the issue is that this is not a postscript printer which hopefully I can get at the alternate site.
I am curious why this is different on a Mac than in Windows. If the printer works if direct connected, why does the Mac OS need the special drivers to extend the connection through a network? I'm curious as I mooonlight setting up home networks and I don't want to be a "windows only" solution. Oh, and would this work on the Mac if I had selected an Apple print server or wireless router with printer port built in?
Thanks again.

Need help getting guest access to work.

I have searched and Googled and found very little about enabling temporary guest access on an AEBS.
What I could find said just type in "the PIN number." OK, what PIN number? It appears that the device seeking access is supposed to supply it somehow and then I type it in while using the Airport Utility. I see no such number on the device. I also tried the "first one to try" method and got nowhere.
In both cases I was using an iPhone that wanted to use my network. Does this work with iPhones?
Many thanks,
-dan

This thread http://discussions.apple.com/thread.jspa?messageID=4088108&#4088108 looked helpful but I can't get guest access to work for my son's guest using a Dell XP laptop (using Dell wireless management) despite allowing timed access. Neither the PIN nor the first attempt option allowed him on the network without giving him our password.
It's still not clear if or when this will work. At the very least, the documentation is terrible.

Need help getting handoff and continuity working on iPhone 6 and iPAd

I currentky have a first gen iPad mini and iPhone 6 Plus on the verizon network. I have been wanting to use the handoff features but don't have some of the options in the settings menu. First, do you have to have a Mac to use continuity? If not, the option to turn on continuity under messages in the settings menu isn't listed for me, so I cant generate the code to type into my iPad. Same goes for calling. I don't have the option in the phone settings to turn continuity on. Looking for some advice, thank you.

Hi there Jfalzon82,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue setting up Continuity with your iPhone 6 Plus and iPad mini, and you’re wondering if you need a Mac to setup them up properly. You don’t need a Mac. Take a look at the article linked below which will walk you through the process of setting up Continuity on your devices.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
So long,
-Jason

Getting SMS relay to work with 2 macs

Hey guys,
So I have an iMac (late 2013 running OS 10.10.1) and a Macbook Air. (mid 2013 running OS 10.10.1) I've just noticed that SMS relay (from iPhone 6 running 8.1.1) only wants to work with one of the computers at a time, and on top of that, the devices listed under Text Message Forwarding in settings will have the wrong name.
To try and explain, if I have my iMac set up for SMS relay then in my device options for forwarding I'll have
Quinn's iMac
Quinn's iPad
Nick's Mac
All my devices should be Quinn’s X. However Nick is my first name.
Whereas if I do some jiggery-pokery (signing in and out of iCloud, turn iMessages on and off etc) and set up the MBA first I get this
Quinn's Macbook Air
Quinn's iPad
Nick's Mac
So the correct name for MBA is recognise now, but not the iMac.
It refuses to acknowledge both computers at the same time. The wrong name is always the same and it just switches about depending which computer I set up forwarding on first. And if I try and activate it using the wrong name, nothing happens.
A couple of points which may help to explain this.
The wrong name is my first name and so it's what the device name was originally called when set up, but I change that straight away to just Quinn’s X.
I set up my iMac from a Time Machine back up of my MBA
I think possibly somewhere between the 2 is where it's getting confused. That a) the device names aren't the pre-assigned ones and b) they are set up from the same settings initially.
So my question is this. Has anyone had this problem, and how did they resolve it?
I fear I may have to wipe one of the computers and start over, probably MBA as it’s my secondary computer. Try and rid my settings of what ever it being used to identify both computers. Pain in the arse to do that and would rather not have to so if anyone else has any suggestions let me know
As I said earlier, I've done all the off/on sign out/sign in business with all the devices multiple times and that's doing nothing. Also, I have just noticed, last thing I did was to configure my iMac to be the one to receive SMS relay. Now I’m out of the house with my MBA, my iPhone is showing that as being the computer that is set up and a quick test confirms this.
Man I’m so confused.
Cheers

I have this exact problem now. I can only "pair" my imessage to 1st macbook and 1 iPad. iMessage won't recognize nor sync messages on the second macbook. When I open the imessages screen on the 2nd MBP, the text bubbles are all green indicating I am sending via SMS and not even sending via iMessage (which has blue text bubbles).
This is really a problem because I need 2 mac's, one for home media use and 1 on the road for work use and I love using iMessage.
Help...

I need help getting my nano to work with my mac!

Similar Messages

Maybe you are looking for