I need help regarding a Ringtone on the Iphone?

I bought a song then turned it into 2 ringtones(Interpol). I SEE the ringtone on the RINGTONE icon on the left of Itunes and its checked. When I sync my Iphone, I make sure that the ringtone is checked so it will be synced. When it finishes I dont see the ringtone under settings>sounds>.. on my Iphone? ...I dont know what i've done wrong? Can anyone please help?

Ramos, you're doing it correctly. I've been experiencing this same issue since upgrading iTunes to 7.5 and the iPhone to 1.1.2; it seems that my ringtones sync once and then the phone syncs a second time and eliminates them from itself. I've tried the m4a to m4r trick as well as doing it in reverse and everytime the same thing happens. Today what I did after I lost them again was watched the phone. Prior to synchronizing I put the phone onto the sounds page so I could see what was displayed. When the phone sycnrhonized the ringtones they appeared and I pulled my iPhone from the docking station. They are now on my iPhone till the next time I have to synchronize and do this all again.
Key things to note:
All ringtones were purchased from iTunes so they are not home made.
Synchronize once through before doing the remove from dock trick as you want to make sure all contacts, calednar, music, and pictures are updated. Ringtones are always synced last from what I can tell.
Good luck.
-Alex

Similar Messages

  • I need help. Recently I purchased the iPhone 5C. I restored my new phone from my icloud backup. However, my pictures did not restore. I do not understand what is going on but I would really love to get my pictures back as soon as possible. Help. Please?

    I really need the help. Thanks.

    If you are upgrading from and old phone and still have the old phone, the easiest thing to do would be to import the photos from your old phone to your computer, as explained here: http://support.apple.com/kb/HT4083.
    If not, and all you have is the backup, about all you can do is try restoring the backup again, or try restoring an earlier backup of your old phone if one is listed.  If you have to restore the same backup, be sure your phone is near your wifi router and connected to your charger so there won't be any interruption in the wifi signal.  You might also want to try the approach posted by ezjules here: https://discussions.apple.com/message/19518589#19518589.  This basically involves opening the camera roll on your phone after the phone restarts during the restore process and leaving it that way until the restore is done.  This seems to have worked for some people.

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

    Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
    I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
    Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
    Please please post here.
    Thanks
    Tiaan

    Greetings fcit@!A,
    After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • Need Help Regarding JAVA BEAN

    Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
    thanks in advance
    Rehan MIrza

    Here is a good link that indicate that JavaBean is not only for applets
    http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
    quote:
    The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
    Francois

  • I need help regarding setting my mail accounts on macbook pro

    I need help regarding resetting my mail accounts on macbook pro

    What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
    You're going to have to be a little more specific in what you need...
    Clinton

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • Need Help Regarding  ibook

    em user of   iphone  3gs  os 6.1.6
    Yesterday  i restore ma  iphone
    after that  em  Unable  to   install    ibook in  ma iphone  its  say me that u  need  os 7 ...
    need help regarding this issue....   what i do  is there any alternative app  ...?

    Hey Seungly,
    I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
    That could very easily be the case, a bad Airport card. Look at this recent post:
    http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
    John diagnosed it from the panic log.
    Does yours say something similar?
    Richard

  • Need help regarding image scanning from scanner and resizing it...

    Hi,
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
    Thanks,
    Avinash.
    Edited by: Kalakonda on Jul 24, 2009 8:08 AM

    Kalakonda wrote:
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

  • HT201269 hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.

  • HT4623 hy i need help i want to downgrade my iphone 4 from ios 6.0.1 to 5.1.1 how can i do because i dont like the ios 6.

    hy i need help i want to downgrade my iphone 4 from ios 6.0.1 to 5.1.1 how can i do because i dont like the ios 6. pls help thank

    There's no official way to do that. Downgrading was never supported since the first iPhone.

  • Hi i need help on BAPI to Update the ADRT & ADR6 tables

    hi,
    i need help on BAPI to Update the ADRT & ADR6 tables
    these are the fields to be updated
    ADRT-Remark Table
    ADR6-SMTP_ADDR
    ADR6-DFT_RECEIV
    Please guide me what parameters to be passed to update
    ADR6 & ADRT tables

    Look at this function Group
    <b>BUBA_3                         SAP BP: External BAPI Function Modules     </b>                        
    BAPI_BUPA_ADDRESS_ADD          SAP BP, BAPI: Add Address                                          
    BAPI_BUPA_ADDRESS_CHANGE       SAP BP, BAPI: Change Address                                       
    BAPI_BUPA_ADDRESS_GET_NUMBERS  SAP BP, BAPI: Read Address Numbers                                 
    BAPI_BUPA_ADDRESS_GETDETAIL    SAP BP, BAPI: Read Address                                         
    BAPI_BUPA_ADDRESS_REMOVE       SAP BP, BAPI: Delete Address                                       
    BAPI_BUPA_ADDRESSES_GET        SAP BP, BAPI: Determine All Addresses                              
    BAPI_BUPR_CONTP_ADDR_ADD       SAP BP, BAPI: Add Contact Person Relationship Address              
    BAPI_BUPR_CONTP_ADDR_CHANGE    SAP BP, BAPI: Change Contact Person Relationship Address           
    BAPI_BUPR_CONTP_ADDR_GETDETAIL SAP BP, BAPI: Read Contact Person Relationship Addresses           
    BAPI_BUPR_CONTP_ADDR_REMOVE    SAP BP, BAPI: Delete Contact Person Relationship Address           
    BAPI_BUPR_CONTP_ADDRESSES_GET  SAP BP, BAPI: Read Contact Person Relationship Addresses           
    BAPI_BUPR_EMPLO_ADDR_ADD       SAP BP, BAPI: Add Employee Relationship Address                    
    BAPI_BUPR_EMPLO_ADDR_CHANGE    SAP BP, BAPI: Change Employee Relationship Address                 
    BAPI_BUPR_EMPLO_ADDR_GETDETAIL SAP BP, BAPI: Read Employee Relationship Address                   
    BAPI_BUPR_EMPLO_ADDR_REMOVE    SAP BP, BAPI: Delete Employee Relationship Address                 
    BAPI_BUPR_EMPLO_ADDRESSES_GET  SAP BP, BAPI: Read Contact Person Relationship Addresses           
    Look also at OSS <a href="https://service.sap.com/sap/support/notes/306275">Note 306275 - Transferring address data</a>
    Regards

Maybe you are looking for