I own a MacBook pro 17". What would be the best display monitor to connect to for doing editing
Looking for the best display monitor for editing when attaching my MacBook pro 17"
Do you run or are you interested in running a color-calibrated workflow?
Do you have calibration hardware?
What is your budget?
What are your publishing requirements?
Are you printing in-house, or using a service?
The above questions will help you choose an appropriate monitor. The best monitor? Any of the top-of-line NEC's are sure bets.
Similar Messages
-
Hooking up a monitor to m macbook pro ?what would give the best picture ??
i just picked up a monitor to hook up to my macbook pro the moniter is 1080 p what would give the best picture vga or dvi ??? for full 1080 p
Message was edited by: go lakersYou want to go directly from the video out of your MacBookPro to DVI. Don't involve VGA if at all possible.
Depending on the exact model MacBookPro you have, it has either a miniDVI out or a miniDisplayPort out.
• For miniDVI out, all you need is a miniDVI-to-DVI cable or a miniDVI-to-HDMI cable.
• For miniDisplayPort out, you will need the Apple miniDisplayPort-to-DVI adapter plus either a DVI-to-DVI cable or a DVI-to-HDMI cable to connect to your monitor.
Again, what make/model monitor do you have? -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB
I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want. -
Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?
Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet. -
I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!
See if you can boot into single user mode with Command S.
-
My wife has gave me her old ipad what would be the best way to set up her new ipad and to have my own ID?
Backup the old iPad first, either to itunes or iCloud.
Once that is done, setup the new iPad from the backup. Choose the Restore from Backup option when setting up the new iPad.
iOS: How to back up / Restore
http://support.apple.com/kb/ht1766
When that is done, wipe the old iPad clean and set up as new.
Settings->General->Reset->Erase all Content and Settings
You can create a new Apple Id when you set up the iPad again. -
what would be the best OS for the macbook pro 13" late 2011?
Mavericks, make sure you have at least 4GB of Ram
-
Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?
driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products. -
I have a macbook pro 10.6.8. The screen displays vertical grey lines how do i fix it?
I have a macbook pro 10.6.8. The screen displays vertical grey lines. I tried Crtl.command.eject... Did not work. I tried Command.crtl.p.r. way; Didnt work. What is wrong with my mac and how can i fix it?
NVRAM reset is command, option, P and R.
Restart the computer and immediately hold the four keys down. Keep holding the keys down, and let the Mac chime three times, then release the keys. Be patient it could take some time.
That being said what you describe may be a hardware issue, so the NVRAM reset probably won't work.
You can get a free diagnosis at an Apple genius bar. Make an appointment and take the MBP in,
http://www.apple.com/retail/geniusbar/ -
Shuffle 4th gen.+ Version Mac OS X 10.4.11. What would be the best solution?
I am getting new Shuffle 4th Generation, but my Macbook is Version Mac OS X 10.4.11.
What would be the best solution to make them to work together?Purchase and install a copy of Mac OS X 10.5 Leopard and upgrade it to 10.5.8. You can still find retail copies of Leopard online at Amazon, eBay, and third party resellers sites.
However, before doing that, verify that your Mac can indeed run Leopard by meeting the following hardware requirements.
Requirements for Mac OS X v10.5
B-rock -
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements
Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot -
Looking to upgrade my OS from 10.5.8 to something newer, what would be the best option?
I would like to upgrade my operating system, but not sure what would be the best option. I have had the computer for several years and haven't had a problem, I just think it's time to upgrade. Any suggestions?
Which model iMac do you have?
The best option would be the one (OS) that meets your needs of what you want to do AND if you meet ALL the OS system requirements. Suggest that you read the system requirements of the OS you are interested in to make sure you meet all the requirements both hardware & software. -
Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?
Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks
If your computer does not have Thunderbolt you cannot use a Thunderbolt display. There are no adapters that will help.
Maybe you are looking for
-
360 Degree Animation Effect in flash
Hi everyone, I have to create a 360 degree animation effect on 2d image in flash. Basicaly its a product image and has to be animated in 360 degree. Presently I am working on Flash CS4 and it has 3d tool, but i was unable to make it. Now the thing is
-
Hello, Pls help me while I am intalling itunes for win7 I getting follwoing errro: an error occurred during the intallation of assembly Microsoft.VC80.CRT.type='win32".version="8.0.050727.6195",publicKeyToken="1fc8b .3b9a1e18e3b".processorArchitectyr
-
Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad
-
HRMS database Interface for Timecard Data
I am new to working with the Oracle Apps database. I need to setup an interface to send time card data from a third party app into the HRMS system. The data I have consists of an Employee Identifier (Can be set to match the HRMS employee identifier),
-
Staging - Production Deployment
I won't be able to work with the Contribute software for a day or two, but I'm trying to understand something about it now. I'm planning on using the two server, staging - deployment approach. Does Contribute push content from the staging server to t