I Photosmart eStation C510a, the zeen will not sync with the printer,or connect to internet.
Hi,
I require some asisstance with my Photosmart eStation C510a. The zeen will not sync with the printer, and I cannot seem to connect it with the internet. When I first installed this printer, it was fine, both the zeen and printer were connected and in sync.
An update was automatically installed by H.P. which appeared to create a problem with the zeen , being unable to sync with the printer, the zeen also lost the internet connection. The printer is working fine, and responds to the zeens commands for printing,
scanning and copying, but I would love to have the internet connection from the zeen, whereby I can use it for emailing etc.
Is there anyone out there that can help?
Thanks,
Christorobb.
This document might help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02497857&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Similar Messages
-
I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help
Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link -
I recently had a problem with my iPhone 3G. I upgraded to OS 5.1.1. The thing crashed. I took it to the AT&T store and they cleared it of everything. So I re-installed all of my personal stuff and apps. All is again OK with the exception of the calendar. It will not sync with my home computer and is blank. How do I correct this?
What are you keeping your calendar in on your PC? Outlook?
-
Has anyone else had the same problem with a new phone and new telephone number?
I would delete all data from the phone and restore as new. I assume the phone is unlocked. Then I would get the SIM card from the carrier I want to use and activate the SIM with the carrier and po my phone number across. After that I would use the SIM card in the phone and activate the phone using iTunes, a computer and the setup assistant that will pop up in iTunes and you should be good to go. I don't know what you did when you got into the trouble you now have.
-
My ipod will not sync with the computer, but it will charge?
My ipod will not sync with the computer bt it will charge.. the ipod doesnt come up with "do not disconnect" anymore.. i have been puting music on it for the last week and all of a suden i cnt put music on anymore.. Whats the problem?
If the ipod is no longer being seen by your computer, please try the following troubleshooting steps located on this website.
http://docs.info.apple.com/article.html?artnum=61711 -
My Iphone 6 will not sync with the bluetooth in my car. 2010 Mercedes-Benz
My iphone 6 will not sync with the bluetooth in my car. My car is a Mercedes 2010 GLK350. Anyone having this problem and if so is Apple working on it?
Hey blud57,
Thanks for the question. The following resource outlines information and troubleshooting steps if you are having issues with your car stereo connection:
iOS: Troubleshooting car stereo connections - Apple Support
http://support.apple.com/en-us/ts3581
Additional information:
If you can’t use a Bluetooth accessory or car kit - Apple Support
http://support.apple.com/en-us/HT6473
Thanks,
Matt M. -
I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?
You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I got a new computer and my IPOD will not sync with the new computer.....I have a ITUNES account on the new computer and is downloading music just fine but it will not sync to the IPOD....What should I do to sync my IPOD? thanks
Copy the ENTIRE iTunes folder from the old computer to the new computer.
Attempts to sync an iDevice to a new computer will remove all content from the device and replace it with content from the new, empty library. -
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
My iPhone 4S will not sync with the music I have selected in iTunes. Has anyone else had this issue and what is the best way to fix it.
Hi,
Setting up syncing
Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
USB syncing
Open iTunes.
Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side. Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
Click Apply, in the lower-right corner of the screen, to sync.
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
Hope this helps -
the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?
Follow the steps given here…
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?
http://support.apple.com/kb/TS1538
-
Old Nano will not sync with I Tunes ? dates to downloading I Tunes 11 Using original connections ? Any comments
Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.
-
The calendar on the imac is not syncing with the iphone?
The calendar on my macpro, operating system OS X 10.6.8, does not sync with the iphone? When I look up on the info tab in itunes, the calendar is checked to sync
Completely by serendipity I just fixed this!
I was perplexed as to why all my events showed in iCal on my computer, but only some events would show in iCal on my iphone.
All day events were not showing, appointments weren't showing and neither was work, but social events were, no matter how many times i tried to sync my iphone with my MacBook Pro. Hmmm strange.
So I only just figured it out accidentally when on iCal on my iphone that if i click the 'calendars' tab in the top left hand corner, it takes me to a list of all my created calendars (and their colours) that I have in iCal.
If you tap on a certain calendar it will display only those events. Eg. I tapped on my calendar 'appointments >', and iCal only displayed all of my appointment times on my iphone and not the other events.
If I tap on 'work >', it displays all work events. Etc.
Is this making sense??
NOW:
If you go back to the 'calendars' tab on iCal on the iphone and tap on 'All >'...
then
Hooray!!! All your events will be displayed.
Hopefully! :P
Hope this helps!! -
I have downloaded Navfree GPS from the app store.
It will not transfer from the desktop to the iphone .
Can somebody help please?Someone help! I dont know how to do this and please put the words into an easy way to understand because im young...
Maybe you are looking for
-
PI 7.11 sp6 system copy causes target sys to register with source
Experts, We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g. I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT). I used the most recenty PI system copy guide that is specific for PI 7
-
GoldenGate reading redo/multiple extracts
What are the downsides of having multiple extracts on the same table in golden gate? I have a scenario where: LOCALITY_SETTING_TBL PK_NUM COLUMN_ONE COLUMN_TWO ID1 456 129000 mapping to 2 tabl
-
Can anyone help me in DefaultTreeModel insertNodeInto(.. meth.
hi, I am adding items or nodes to my DefaultTreeModel. And I have a probelm I am trying to build a tree structure by clicking on an item and adding it under the previous one. That is if I add one item and then add another item then the first item is
-
How to read my cursor that is ref cursor returning user defined type
Hi I have types defined as follows: TYPE MY_RECORD IS RECORD ( COL1 TABLE1.COL1%TYPE, COL2 TABLE1.COL2%TYPE TYPE MY_CURSOR IS REF CURSOR RETURN MY_RECORD;This is used as return type in a stored procedure. I have a pl/sql block where I make a call to
-
UnsatisfiedLinkError in OracleRuntime.exitSession
Hi experts, Whenever I try to exit from a session by using oracle.aurora.vm.OracleRuntime.exitSession(1), I get a UnsatisfiedLinkError :exitSession_. Now this happens whenever there is a native method declared whose implementation is not avaliable in