I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?
I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?
The message means just what it says. Remove the damaged copy and try downloading it again.
Edit: Looking at FontLab's page, there's two issues going on.
1) It's a PowerPC app and will not run on any version of OS X newer than Snow Leopard, 10.6.x.
2) The "workaround" they offer is to purchase the Windows version and then run it in the the open source Wine, Windows emulator.
Similar Messages
-
You can't open the application "(null)" because it may be damaged or incomplete.
I'm getting this problem when im trying to open certain apps
Can you please help?I have the same issue trying to install new software: Photoshop 5.5 from a brand new external hard drive on my brand new MacBook Pro running Mavericks.
I found someone had mentioned updating Java, so I did that...said it installed properly...rebooted...tried again...same result.
You can’t open the application “(null)” because it may be damaged or incomplete. -
Can't open the application "(null)" because it may be damaged or incomplete?
Unable to get my Canon 8800F Scanner to connect or operate. Had no problems before I downloaded the Maverick operating system. This system has created several problems with email, etc.
Niether of you are giving us enough information to go on.
What is the Application?!
You need to provide a link so we can at least see it is supported on 10.9.
If it doesn't run it could be using old code that can't run on Mavericks (& we can't help you with third party code - contact the manufacturer) or the OS is blocking the app because it is not signed & Gatekeeper doesn't allow unsigned code to run.
I would turn off Gatekeeper & see if it runs, however since you are not giving us any info on the app we can't even test this for you.
Gatekeeper is inside the Security section of System Preferences setting it to "Anywhere" will disable it. Turn it back on after you test the app.
Gatekeeper
https://support.apple.com/kb/HT5290
Let us know if the app continues to fail. -
You can't open the application iPhoto because it may be damaged or incomplete.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
You can't open the application "Photos" because it may be damaged or incomplete
Hi All,
When trying to open photos after a restore I receive the error message "You can’t open the application “Photos” because it may be damaged or incomplete.
I have had a look under the application and the it is empty, the problem is I cannot seem to find it in the App store to do a re download and reinstall, any one have any ideas?.Photos is included in the system install now so you'll need to boot into the Recovery volume (boot with the Command + R keys held down) and reinstall the system and, with it, Photos. Repair disk permissions with Disk Utility after the installation.
-
i just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year -
Hi my names mark.I have the ipad 2 it's on ios 7.1 I had iOS 7.4 but it downgraded to iOS 7.1 is there any way I can upgrade to iOS 7.4 and the 3D effect is gone off my ipad
There isn't an iOS 7.4 - there was a 7.0.4 (and 7.0.6), 7.1 is the current version.
For the parallax effect, do you currently have Settings > General > Accessibility > Reduce Motion set 'on' ? -
Does anyone know how I can solve this. My cat managed to move iphoto tab to the middle of the screen and now I cannot open it and get this message.
You cannot open the application iphoto because it may be damaged or incomplete
Any help appreciatedYou need a more technically saavy cat, for a start.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.
Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update. -
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?GrandmaGG wrote:
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?
Do you have iLife '11 Discs or did you download it from the App Store? -
I have the version of iPhoto that comes with my OS when I purchased my MacBook, but now I can't open it, because it says this, "You can’t open the application “iPhoto” because it may be damaged or incomplete. Please help I have tons of family photos.
1 - the iPhoto application is an application and does not hole your photos - your photos are in the iPhoto library an dour normal daily backup will back them up so your photos are safe
2 - what exactly does the error message say? You probably need to reinstall the iPhoto application form the original source
3 - note that no version of iPhoto comes with any OS - iPhoto comes with all new Macs but not with any OS and most OS versions can run many different versions of iPhoto
LN -
I am not able to edit my desktop, I receive the following error: You can’t open the application “Desktop” because it may be damaged or incomplete.
Also, I cannot rearrange folders, add folders, or move things out of my trash back to the desktop.Try using another account and see if the problem persists.
Try booting into the Safe Mode and see if the problem persists.
Starting Up in the Safe Mode
What is Safe Mode -
lattly wen i have attempeted to open the iphoto app and it says "you can't open the application iPhoto because it may be damaged or incomplete" i have no idea what to do
what should i doWill iPhoto launch if you hold down the option key during launch and select Create New from the selections available?
-
Message: You can't open the application Firefox because it may be damaged or incomplete
I've been using Firefox for a long time. Today I decided to change the settings to delete my history when I closed the window. Now when I try to open up Firefox I get a continuous pinwheel. I deleted Firefox from my computer and reinstalled, but it still won't work. There's now a grey icon titled Firefox with a square and a circle and line through it. When I try to delete this icon, it won't let me, saying Firefox is still running. When I try to open the icon, I get the following message: "You can't open this application Firefox because it may be damaged or incomplete."
Any suggestions on what to do?Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
Sales order reference at the time of Production Planning
Hi all, Is there any Hard check (or) Validation at the time of assigning sales order in Production order? to be more specific At the time of creating production plann, we assign open sales order to that. Again if new production plan is created and w
-
What is says above
-
Hi, Everything works fine until I add a flash music video or any video to the page then it won't Publish. But if I remove the videos from the page it will Publish. (this is not an embed code but instead a link set up from the hyperlink menu when I cl
-
Hello, to start Adobe Acrobat (not Adobe Reader) in VB6 by set AcroApp = createObject("AcroExch.App") and open a Document by set AVDoc = chreatObject("AcroExch.AVDoc") and AVDoch.open "c:\test.pdf". That's O.K. When I start this way with a Reader-ins
-
Running a script on startup and shutdown
Hi, I've got my own two AppleScript scripts. They are very simple, in fact they only do a shell script. I need to run one of them every time I login and the other every time I shutdown the Mac. While the first step can be accomplished using login ele