I there any dependcy between Java Enterprise Edition and Java standard Edit

Hi Friends,
Is J2EE 1.4 uses Java SDK 1.4 or 1.5.Please reply as earlier as possible.It is urgent
Thanks
Bye

Each version of the Java EE platform must be able to run on the associated version of the Java SE platform. So, J2EE 1.4 must be able to run on J2SE 1.4 , Java EE 5 must be able to run on Java SE 5, etc. Note that this doesn't mean a particular implementation of Java EE can't be run with a more recent version of the JDK. For example, the J2EE 1.4 SDK can be run with J2SE 1.4 or Java SE 5. The key is that both the implementation of the Java EE platform and the applications written to that particular release of the platform must write to the corresponding Java SE version API. In other words, neither a J2EE 1.4 implementation nor a J2EE 1.4 application should make use of an API that was added in Java SE 5.
--ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • Is there any incompatibility between Labview 8.5 and Traditional DAQ?

    Hi,  I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
    Thanks.

    First, you posted to the wrong board. Measure is an old add-on for Excel.
    Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

  • Is there any difference between the commerical product and the Teacher/Student version?

    In Adobe Photo Shop Elements 13 and Premiere Elements 13 is there any difference between the commerical product and the Teacher/Student version? I don't remember them having two versions in the past.

    Is there a difference? Sure. Will it be noticable? Maybe.
    The 9i client will use one of the 9i ODBC drivers. The 8i client will use one of the 8i ODBC drivers. The 9i drivers will generally have more bug fixes & more features than the 8i drivers. It is possible, though rare, that the 9i drivers will fix a bug whose behavior your application was dependent on and/or introduce bugs that were not in the earlier version. Of course, you have to consider the different features of the underlying clients as well-- i.e. a 9.2 Oracle client cannot communicate with a 7.3.4 database, an 8i client doesn't know how to handle data types introduced in 9i (i.e. TIMESTAMP), etc.
    Justin

  • Is there any dependency between third-party adapter and XI system service?

    Hi Friends,
    I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
    I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
    so just want to know is there any dependency between third-party adapter and XI system service?
    Thanks & Regards,
    Jason

    Hi soo.richard,
    You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
    Airplay itself can be password protected through the airplay settings.
    I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
    Hope this helps.

  • Is there any difference between sun solaris 8 and windows for Garb.Collecti

    Hi All,
    is there any difference between refreshing the java virtual memory between sun solaris 8 and windows.i am fetching 25 records for every search action.in windows usage of java virual memory is 5 mb after every search it refreshes the memory.while using the same code in sun solaris 8 it throws heap out of memory error and for every search it wont refresh the memory.

    Some other related links
    http://java.sun.com/docs/hotspot/gc5.0/gc_tuning_5.html
    http://e-docs.bea.com/wls/docs81/perform/JVMTuning.html

  • Is there any difference between amd 7640m 1GB and amd 7670m 2GB graphics performance...?

    Hello experts,
                              I have a question regarding laptop gaming performance.
    I have HP Pavilion G6 2005ax with AMD 7640g + 7670m (1.5 GB) graphics. But gaming performance is not awesome. It's not capable to run latest PC game at highest settings.
    My question is that Is there any difference between AMD 7640g + 7670m (1.5 GB) and AMD 7640g + 7670m (2.5 GB) graphics cards performance...?
    One graphics card hase 7670m 1GB and second one has 7670m 2GB graphics RAM.
    So which one perform better and why....?
    Should I upgrade AMD 7670m 1GB to AMD 7670m 2GB to play latest pc games at highest settings.....?
    Netbook configuration----- 
    HP Pavilion G6 2005AX
    AMD A-8 4500m processor
    4GB RAM
    AMD 7640g + 7670m (1.5 GB)
    5ooGB HDD

    CSsingh wrote:
    .... One graphics card hase 7670m 1GB and second one has 7670m 2GB graphics RAM. So which one perform better and why....?
    Hi,
    Same GPU but more RAM will perform better. You have to make decision before hand, upgrading it is a pain.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is there any difference between the old iPod and the new one?

    Hello everyone,
    first of all i'd like to thank you for reading my post:)
    My question is a simple one, i bought the new iPod Video 30 GB, and i came across a couple of questions while i was heading home with my new toy.
    How can i actually see the difference between this my new iPod and the one that they where selling before?
    Is there any visible difference amongst those two that i can notice?
    Thanks once again.

    Hello everyone,
    first of all i'd like to thank you for reading my
    post:)
    My question is a simple one, i bought the new iPod
    Video 30 GB, and i came across a couple of questions
    while i was heading home with my new toy.
    How can i actually see the difference between this
    my new iPod and the one that they where selling
    before?
    Is there any visible difference amongst those two
    that i can notice?
    The new update has a scroll feature on it to make it easier to search for songs on your ipod. It also lets you control the maximum volume your ipod can reach. It has better video quality as well. It lets you play games on your ipod (you have to download them from the Muisc Store)
    and thats about it! Have fun with your new ipod!
    kEat0n

  • Is there any difference between a WinNT VI and a Win98 VI?

    Hello!
    I have been writing a VI using Labview 6.1 on a WinNT machine. When I build it into an application and place it on a machine running the run-time engine and Win98, it doesn't work.
    It works fine on the NT machine, but not on the 98 machine. I've read where you should be able to transfer between the different Win versions, so I'm at a loss to explain why there would be any difference in the two.
    Thanks,
    Dave Neumann
    [email protected]

    Oops. I guess my question was awfully open-ended wasn't it?
    OK, here's the deal.
    The VI I created is simply trying to toggle outputs on a digital I/O card. Nothing complicated.
    On the WinNT machine, I can toggle the outputs. When I set them high, I see a high voltage from the card. It remains high until I switch it low, when the voltage drops. This is good.
    On the Win98 machine, I attempt to toggle the output high, and I hear the click of a relay, and a short current spike, but the voltage does not remain high. When I switch back to low I get no response back at all. The voltage remains low the entire time, with a small impulse jump when I try to set it high.
    We assume that the card is switching high, then immediately switching low ag
    ain, not holding the high state.
    The card on the Win98 machine, however, DOES work with the software included with the card, so we know it can toggle it's outputs.
    The Win98 and WinNT machines are nearly identical in their components, with the exception of their OS.
    The card I'm attempting to use is a Quatech PXB-32IO/PCI I/O card.
    Hope this clears it up a little!
    Thanks for the help,
    Dave Neumann
    [email protected]

  • Is there any difference between "jsp:useBean" and "scriptlet" ?

    A few days ago, I asked similar question. But I didn't get the answer I wanted.
    I want to know the differnce between <jsp:useBean../> and <% .. %>(scriptlet).
    I tested in three environments(Oracle Jserv, OC4J, and Apache Tomcat).
    In Oracle Jserv and OC4J, a problem occured. But, Apache Tomcat does not occur a problem.
    For example,
    1) TestClass.java (Bean)
    public class TestClass {
    private String txt;
    public class TestClass {
    txt = "Test"; ----- (g
    public String getTxt() {
    return txt;
    2) test.jsp
    <html><body>
    <% TestClass test = new TestClass(); %> ---(h
    <%= test.getTxt() %>
    </body></html>
    Assume that I visit "http://localhost:8888/test.jsp".
    In Tomcat, if I change "Test"(number(g) to "Test1" and compile the browser shows the change.
    But Oracle Jserv and OC4J does not do that. They also show the old String.
    So, I changed <% TestClass test = new TestClass(); %>(number(h) to <jsp:useBean id="test" class="TestClass" />. That is, I changed "Scriptlet" to "JSP useBean Tag".
    Then, Oracle Jserv and OC4J also show the changes.
    To conclude, is there any difference between "JSP useBean Tag" and "Scriptlet"?
    Can't I use a scriptlet (to make a class) in Oracle Servlet Engine?
    Thanks.

    It could be as simple as the JSP not recompiling between java recompiles - ie, it compiles in the link to the old class.
    Try changing the JSP file (add and delete a space) after you change the java code, and then see what happens.
    Jonny
    null

  • Is there any difference between Regular SAP Cert / SAP TechEd Cert

    Hello All,
    I need to appear for the following Certification:
    SAP Consultant Certification Technology Consultant SAP NetWeaver‘04 - SAP Web AS for ORACLE (WAS 620, Oracle 9)
    Is there any difference between regular SAP certification and Certification at TechEd (- except certification costs)
    Regards,
    Ammey Kesarkar

    No. It is just the certification exam is offered at SAP Tech Ed event.
    Regards,
    Jai Shankar

  • Is there any difference between the iPad and iPhone cables?

    Alot of people are mentioning that there's difference with the speed while syncronising/backup. I am just wondering is there any difference between the cables? and how can I distinguish it? Coz I have most of the i- products and I have just mixed up all the cables >__< Thank you!

    I can confirm that iPad/iPod cables are identical. Don't know about iPhone. IF there is a difference, you'll know immediately - function or functions won't work.
    There will be NO speed difference. Either the copper is present or it isn't and copper is copper.

  • HT204370 is there any difference between apple tv  and itunes PURCHASED movies

    is there any difference between apple tv purchase and itunes PURCHASED movies ?

    Welcome to Apple Support Communities
    Read > http://en.wikipedia.org/wiki/Mobile_DDR DDR is the RAM used in computers, and LPDDR is common in mobile computers

  • Is there any integration between hashtags to enterprise keywords?

    Is there any integration between hashtags to enterprise keywords?
    keren tsur

    Hi keren,
    Could you please elaborate your question?
    Here are some results as I tested:
    1.Hashtags term set and Keywords term set are both under System term store group.
    2.Enterprise keywords column could retrieve and use the terms from both Hashtags and Keywords, but new terms created in column could only be saved to Keywords term set.
    3. Newsfeed web part could only retrieve the hashtags terms, and newly create hashtags terms could only be saved to Hashtags term set.
    Here are some useful article about this topic you can take a look.
    http://sharepoint.stackexchange.com/questions/94549/terms-keywords-tags-hashtags-this-is-confusing
    http://sp2013.blogspot.com/2014/01/sharepoint-2013-hashtags.html
    http://www.colligo.com/blog/sharepoint/3-quick-tips-for-using-hashtags-in-sharepoint-2013/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Is there any Link between BNK_MONI and DMEE

    Hi ,
    I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
    I am running following sequence of T Codes :
    RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
    I want to update one of the fields in output file generated by BNK_MONI .
    Is there any link between BNK_MODI and DMEE ?
    Or shall  I have to Debug background job created by F111 like it is done in case of F110 ?
    Please suggest..
    Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

    Hi,
    Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
    In Addition to above information,
    In VOV4,
    DL+ NORM +   +    -&#61664;DLN
    In VOV5,
    For Itemcatagory DLN+        --&#61664;CN
    From this schedule line category CN,movement type 601 is taken during without reference to order –delivery creation.
    MCM

  • Is there any Similar between Class.forName() and new operator ???

    Plz tel me is there any Similar between Class.forName() and new operator ??? i have been asked this ques in interview

    You probably should have used the other thread:
    http://forum.java.sun.com/thread.jspa?threadID=792678
    To add a little confusion to the matter...Class objects are in fact objects. They're objects representing classes. So, in a sense, I guess, you could say they're similar -- in each you get an object. But in practice Class objects and all other objects should be considered semantically different unless you're doing some pretty unusual stuff. Also Class.forName is more of a factory method than a constructor.

Maybe you are looking for

  • Dynamically generate JSF Source code in a JSP

    Hi, I have a JSP and instead of writing the JSF source Code like: <h:inputText styleClass="entryInput" id="textNumberOfServerMachinesInput" value="#{DataAccess.value}" valueChangeListener="#{InputValueChanged.processValueChange}"> </h:inputText> manu

  • R12 Sourcing Award Approval (PONAWAPR)  Workflow Issue

    Hi, We are implementing R12.1.3 Financial and Procurement currently at client site. We modified Sourcing Award Approval workflow to remove "Forward" button. Tested in various Instance, its working fine. But recently we created another instance which

  • Photoshop 5.5 conflict with Acrobat Pro 11

    I seem to be having a conflict between Photoshop 5.5 and Acrobat Pro 11. Photoshop will not load past "Reading Preferences" since we have installed Acrobat Pro 11. What can I do to fix this?

  • Can't open Adobe Muse

    Hi! I installed Adobe Muse CC a couple of days ago. When I tried to open it today, a dialog box appeared with the following: it is necessary to have more account information to use adobe muse. If you wan't to continue, you have to log on" I pushed th

  • SU01 - Licence Data Tab

    Hi everyone, I am trying to pull the list of entries I have in the "Contractual User Type" drop down list in the "Licence Data" tab in SU01 How can I get this list in a spreadsheet format quickly? Any suggestion welcomed Regards Corinne