I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored"
I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored" Can anyone help me to get out of this mess?
Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Similar Messages
-
Restored from Time Machine but iPhoto library file corrupted
iMac OSX 10.9.4 crashed mid-use. Would not chime let alone re-start. Restored successfully from Time Machine and apart from Mail sending (hopefully) a few up to four year old emails again, it seemed fine. However, apart from one or two images, iPhoto (9.5.1) library was not visible in its location on an external hard drive. Inspecting Package Contents revealed that the size seemed right and the masters were present so I used Photo Library First Aid (Command Option start) to Repair Permissions and then again to Repair Database. All images and events now ok, as I believe are the locations, but the previously identified Faces are all missing. Is there a way to recover these?
I do have a separate Carbon Copy Cloner back up from the iPhoto external hard drive to another external hard drive and before, throughout and after the iMac crash, this back up process continued to operate normally. So I could try and re-store the iPhoto library from a CCC back. I just wondered if anyone knew another way that I could just repair the Faces part as the rest seems ok now.Hi Mr D
Still wading through treacle!
I recall I used iPhoto Library Manager and then selected largest file size and most metadata to merge the two libraries. Still not perfect but images are there even if a few face thumbnails are absent.
Using SMART Utility I checked to see what was going on with hard drives as a CCC back up reported some deep system files were on an unreadable block. I should have replaced them from CCC but there were only a few and they were so unusual I hesitated. Whilst searching which replacement hard drive I could fit and whether I could fit it myself, iMac crashed again so another restore from TM. (According to SU my hard drive is failing as it has 6 re-allocated blocks and 1 event error). Back up and restored, I now see that various movies in iMovie '09 cannot access the source files as they are not in the original location. This I think is more to do with me relocating my iPhoto library for space reasons to an external hard drive rather than the crashes and re-builds. I hadn't realised the distinction between imported movies into iMovie '09 (from a movie camera say) and those from iPhoto (from an iPhone say) and what would happen if, for space reasons, I moved the iPhoto library to an external hard drive. Yes, I know now I should have consolidated the movies. There are occasions when a small user guide might help! Also the new iMovie '10 library, which runs as an alternative alongside iMovie '09, is happily located on the external hard drive whereas the iMovie '09 library sits on the iMac's hard drive.. All the still images are ok in all the movies in iMovie '09 (even having moved?) its just the .avi files that it cannot locate. Simples, I thought. I created a folder in iPhoto '09 with all the iPhoto avi files and thought if I exported them and then imported them into a new library in the location (my iMac user pictures folder) it would then be able to 'see' them. Problem is in the iPhoto '09 library on the external hard drive I have many more folders than in the newly created iMovie '09 library on the iMac hard drive. iMovie '09 is looking for /Users/'me'/Pictures/iPhoto library/Originals/'movie file title'/'file name'.avi but the 'Originals' folder is in fact just an alias to point to an adjacent folder in the iMovie library package called 'Masters' and in the new library I only have 'Masters' and not an alias 'Originals' folder.
So iMovie '09 still cannot 'see' the .avi files even though they are now (almost) in the right location on the correct drive (the iMac) as I don't have an 'Originals' folder in this library whereas the legacy library does. Can I get around this? Why does one library have a 'Masters' folder as well as an 'Originals' and 'Modified' aliases and the new library only 'Masters'? As I cannot re-point iMovie I need to have an 'Originals' alias pointing at 'Masters' for this to possibly work. My plan was to resolve the project issues once the files were all accessible in the correct place and then consolidate and move the iMovie '09 library as a working entity to the external hard drive where there is space.
The second issue is that of the c600 .avi files I exported (all of which function in the library from whence they were exported), 129 will not import into the new '09 library I have created on my iMac hard drive. This is odd as they are visible and play in their source library but refuse to be imported into the new one made with the same application. Other than a couple of the ones that do import showing a format in QT as 16 bit little-endian signed integer 44100Hz as opposed to 8 bit unsigend integer 16000HGz for one that didn't, I am at a loss to understand what the new library objects to.
I have now isolated all the exported .avi files that will not import into a folder pending someone hopefully providing a answer.... -
I would like to do a full restore from time machine but have lost my boot/install disk.
Hi,
Recently had my HDD replaced (with fresh OS installed) and even though I have everything backed up on time machine am struggling to complete a full restore.
After reading time machine help understand I need to mac os install/boot disk to get to the time machine full restore utlility.
I cannot find my install disk. Can I create one from my current mac?
Any suggestions? Thanks!The install disk cannot be created. If you call Apple (1-800-MYAPPLE) they should be able to order you a new set of disks specifically for your computer.
I found this old answer talking about what the disks are:
If you bought your computer new, you may be able to contact Apple about buying a replacement boot/install disc#1 for your specific computer. If a disc is lost or damaged, they have been known to be able to help. Not sure if a call to Sales Support would be the direction to take on this; but it would make more sense to ask them about the replacement.
The disc #1 and #2 that come with the machine will (or more, if it has a CD packet and the OS is not on a DVD) restore the computer to how it was new. If you upgrade to an all new OSX version and wanted to add the original applications (instead of buying new ones; not always a good idea if the leap was a great one from original OS to the last version) you could use the disc #2 to add applications to a system. It has installers, & won't boot. -
I restored from time machine but lost all my preferences
I have a late 2008 Mac Pro 2 x 2.8GHz quad core running Mountain Lion.
I have been using the 500Gig HD as my Startup Volume that came with the computer. This drive got too full so I am upgrading to a 3TB drive that I partitioned into 1TB for my startup volume and the other 2TB for other stuff.
Using SuperDuper, I made an exact copy (at least I thought so) of my 500Gig startup volume onto the new 1TB partition. After doing so I swapped out the 500Gig for the 3TB and re-started the computer. Computer boots fine and all the files are there but here are the PROBLEMS:
-None of my settings and preferences are working. My desktop, dock and settings are default.
-Under my user, most of my folders said "The folder can’t be opened because you don’t have permission to see its contents. mac pro." I circumvented this by going to the "get info" and turning on my permissions, but it is still wierd.
-When I go to open my programs (eg Microsoft word) it welcomes me as if it is a new install and I am given a prompt to enter my serial number.
Sooooo, I tried another route, went to my backup drive, (I have another drive that has time machine of the 500 gig startup volume saved to it) and used time machine to "restore" a backup of my 500Gig startup volume onto the new 1TB partition. After doing so and restarting, guess what. No changes; all the same problems.
HELP!!!
Thanks.This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?
Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.
-
Restoring from Time Machine doesn't work
I am attempting to restore from Time Machine on my 13" Late 2008 MacBook, but the restore stops about halfway through.
Some background information: A few weeks ago my computer started exhibiting some weird behaviour. It would turn the disk off or log me out after a few hours (I typically sleep with it on and use at as my alarm clock). Then, apps would crash and quit unexpectedly. It would kick in the HDD when I was not using anything that required it, and the fan would turn on for no reason. Then the worst thing happened: Some days I would get the dreaded "You need to restart your computer" screen multiple times. It almost seems like a virus. The problems persist after multiple PRAM and SMC resets. Sure enough, I tried turning on my computer yesterday and it just won't even start. It would give me the Apple logo, a spinny loading indicator, and then it would give me a very slow progress bar. As soon as the progress bar gets to about one tenth of the way, the computer turns off.
I have everything backed up to a very recent Time Machine. I opened the computer in Recovery Mode and verified the disk. It needed repair. So I repaired it, and it said the repair was unsuccessful and needed to be restored. So I tried restoring it. I ended up having to erase Macintosh HD and reinstalling Lion (which thankfully I could do over the Internet). After reinstalling that, I tried "Restore from Time Machine." It got to about 30% of the restoration and then took me back to the Utilities page spontaneously. It didn't give me an alert or an error of any kind. It has done this multiple times. I may try Migration Assistant and see how that works. I know that a 4-year old MacBook is a bit of a dinosaur anyway, but the machine has been very useful and powerful for the whole time I've had it, and this is not how I'd like to see it die.
I also have a lot of important data on the Time Machine and fear that whatever afflicted my MacBook may afflict the MacBook Pro I intend to get soon, which I will load my TM onto.
Any and all help is deeply appreciated.
-Sam TaylorI have always had problems restoring from my backups. I just replaced my hard drive and did a restore and now there are no icons in the dock (all ?'s) and I cannot click on my Applications folder in any finder window. (Oh, and the fans run constantly at top speed after being on for about 3 minutes.)
This is probably the 10th restore I've done in the past couple of years and I don't think one has worked for me. -
Having trouble restoring from Time Machine
I replaced my HD, on my iMac 2007 Intel 20"' model A1441. After formatting I tried to restore from Time Machine, but continue to receive error messages saying it can't restore the drive. I went over to disk utilities & restored from there, but it renames my hard drive to "time Machine Backup" so I have two backup disks. Is there a way to rename it? Because all the data transfers over. The whole thing is very frustrating! My system was running on OS 10.8.5.
That's not how you restore from Time Machine. If you followed the instructions linked below and it didn't work, erase the volume and install OS X. When you restart, follow the prompts to transfer your data from a snapshot.
OS X Yosemite: Recover your entire system -
I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do
Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html -
I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?
No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software -
Install new hard drive, restore from Time Machine, File Vault Problems
Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup). -
Disk Repair reported that it could not repair the HD Disk. I am to reformat the disk and restore backed up files. OSX Utilities give me a choice of restoring from time machine backup (which I have on MyPassport) but no information on reformatting the disk, which I assume I have to do first. How do I reformat the HD ...or does the restore from Time Machine do both things?
Boot OS X Recovery and use Disk Utility.
If Disk Utility reported the disk cannot be repaired though, you should replace it with a new one. -
Attempt to install Mountain Lion has highlighted need for internal disk repair. Even after "repair" ML still says disk is damaged. Attempt to restore from Time Machine back-up failed - cannot 'see' internal HD to restore to. Help! Has attempt to install ML caused these problems or just highlighted existing need to Repair Disk? Even so, why can back-up from Time Machine not see the internal drive to restore to?
Csound1, William & Sig .... thanks for taking the trouble to reply. I fear you are right - I'll need a new disk. I'm booked in at the Apple Genius Bar in Bordeaux, France on Wed ... quite a challenge as my French isn't great! The current internal disk is 500gb, does anyone know whether I can upgrade my 21.5" iMac (circa Oct-2009 vintage) to a larger size internal disk, 1Tb or even 2Tb? I already have one external 2Tb drive and another one on order (I have masses of media stored and more planned as I've just taken up photography). Seems a bit of a pain managing with only 500gb internal storage. OR, can you advise me on how I can store all my photos on my new 2Tb external drive - I can't seem to figure out how to set the path for iPhoto to see them (I can't even figure out where they are stored right now!). Same with iTunes, how do I set the default storage to the external drive (I moved everything manually and then imported them all from the new drive - it worked but seemed very convoluted). Any advice on how to manage multiple drives gratefully received. And thanks again for previous replies.
-
I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.
You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?
-
My Daughter is currently upgrading her MacBook Pro to OS X Lion. During the upgrade the system rebooted and then stops at the OS X Utilites menu. I have installed this same upgrade on My MacBook Pro and the family iMAC without issue. Did the upgrade encounter a problem? The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.
I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.
Please help.I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.
-
When I try to open a picture in iphoto a message tells me the file cannot be found. How do I find the file? It does not happen with all the pictures.
Is you library a "referenced" or "managed" library:
That message is generated when a library is a "referenced" library and the location of the files have been moved from where they were when originally imported into iPhoto.
Are the photos that this is happening to in the same Event(s)?
What system are your running? Where is your library located? How much free space do you have on your boot drive?
OT
Maybe you are looking for
-
Transferring Photoshopped jpgs from mac to Pc?
This has been somewhat addressed on previous threads, but I couldn't find a simple answer, so I'll ask it again. I just did a huge project, Photoshopping 700 photos on a Mac, using an old version of Elements (2.0). When loaded back into a PC, I got
-
On Windows 8.1 machine when I enter my password in for Creative Cloud Sign In and hit enter/next I just get the 4 square hour glass, it never goes through and I cannot even close the window without canceling it using the task manager. This is my cr
-
hi all, what is the problem to cause the error?? please teach me. thanks. C:\Program Files\Apache Group\Tomcat 4.1\work\Standalone\localhost\examples\jsp\HMC\HTML\testDL3_jsp.java:76: unreported exception java.sql.SQLException; must be caught or decl
-
Hi all, I have my applet which connects to a server. Obviously for security i can only download it from the machine it came from. Currently im passing in the host name as a param. Is there a way to find out the host name with out using a paremeter? I
-
What do i do if my ipad is disabled, show no time, i have never sync to my computer, and have icloud not signed in.