I updated to IOS6 on my IPAD 3 and IPad shows a pic of USB port and ITunes but will connect and/or turn on even when I connect to my computer.

I updated to IOS6 on my IPad and the screen went blank then showed a picture of a USB plug and arrow pointing to ITunes but nothing else happens. I cannot restore, recover or sync anything.... Please help!

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow this.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Similar Messages

HT4623 I am trying to update to ios6, on my iPad 2 . I get a message saying "error occurred while downloading ios6" can anyone help.?

I am trying to update to ios6, on my iPad 2 . I get a message saying "error occurred while downloading ios6" can anyone help.?

Sorry to hear your Adobe experience has been less than stellar. I'll try to help...
1. Photoshop 14.2.1 is now two releases out of date. You might want to go to your Creative Cloud application and ask it to install Photoshop CC (2014). Earlier this year Adobe released 2014.0 as a separate install that can live side by side with 14.2.1. Then just a few days ago they released 2014.1 as an in-place upgrade to 2014.0.
2. You may be able to update Camera Raw directly to version 8.6 by a link from this page:
Keeping Photoshop Up-To-Date
Best of luck to you. Please let us know here if these things help.
-Noel

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan

HT201444 Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting erro 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

How can i restore my ipad to factory settings?
Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting error 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

Usually a USB error. Read here:
http://support.apple.com/kb/ts3694#4016
To restore ipad: Settings > General >(Scroll down) >Reset > Erase All Content & Settings
Cheers,
Alec

I can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help

i can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help

This is a Windows error. See this support document for help. iOS: Unknown error containing '0xE' when connecting to a Windows PC

I updated to iOS6 on my iphone 4s and now its on with60% ob baterry but it dosent charge, i already try other chargers but it dosent work

I updated to iOS6 on my iphone 4s and now its on with60% ob baterry but it dosent charge, i already try other chargers but it dosent work

Hello there, Halatar.
The following Knowledge Base article offers up some great information regarding battery life and improving performance:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
Particularly:
About battery life and the battery
Battery life and number of charge cycles vary by use and settings. Find more information about batteries foriPhone and iPod.
Find information on how long the battery is expected to last between charges.
Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Since updating to iOS6, im on giff gaff and I don't know how to set up the VPN to get 3G to work?

Since updating to iOS6, im on giff gaff and I don't know how to set up the VPN to get 3G to work?

oh sorry, well since i have updated to iOS6 i turn on my 3G, then try to connect to the internet with 3G and it says ''Could not activate mobile data network'' then underneath that says ''You are not subscribed to a mobile data service'' would you be able to help?

I updated my Ipad to IOS 5 but now my Ipad is blank. I backed up to Itunes but can't find my back up info.

I updated my Ipad to IOS 5 but now my Ipad is blank. I backed up to Itunes but can't find my back up info.

Yes, there are two utilities that I use to perform this task, SuperCrazyAwesome’s iPhone Backup Extractor which is a free utility, and addPod’s Juice Phone, also free. Neither solution will work if you have encrypted your backup files. Both allow you to access the backed up data as if the iPhone was connected to your Mac.

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. What do I do now?

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?

I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is.

HT4528 hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
Even if I sold this Ipad and bought a new one, the system memory is still there.
I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
Thanks for your comments.
RAZ

How to show ipad application in itunes, but will only be assessable to owners, not the general public.Using lock code/password protected on iTunes

How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes

So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen

Just bought an ipad mini I have synced it with my itunes but when I go to play my music it just flashes threw all the songs or albums or artists like it is on super fast shuffle until it finds a song it would like to play. need help please

Just bought an ipad mini I have synced it with my itunes but when I go to play my music it just flashes threw all the songs or albums or artists like it is on super fast shuffle until it finds a song it would like to play. need help please

Since you are a new iPad user .....
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download an iPad User Guide to the iPad from the iTunes store.
 Cheers, Tom

Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

My ipad shows "no service" in upper left hand corner but I get google maps and itunes but I cant get to the ibook store

Why does my ipad show "no service" in upper left hand corner but I can get some service like google earth and itunes but I can't get to the ibook's store. Tap "books" does nothing. Thank you.

Try going to settings. Tap Reset, tap reset network connection, wait until the apple goes restart your iPad,. Back to setting tap provider and put in your network password.

I updated to IOS6 on my IPAD 3 and IPad shows a pic of USB port and ITunes but will connect and/or turn on even when I connect to my computer.

Similar Messages

Maybe you are looking for