I want to Pick the Single file from The source Directory

Hi,
My Scenario is File to RFC .. I'm getting the files in the source Directory.. File names are SENDER_(TIMESTAP).XML .. but the problem is... When ever Files are available in the Source Directory Immediately XI was picking all the files at a time.. But I want to to Pick a single file at a time..
for Making this what we have to do.. After Processing the first file then only my Sender adapter should pick the next file... (even though Multiple files are available in my Source Directory)
Regards
Jain

Hi,
the other option was use Adapter specific attributes in the Sender Communication channel..
or
while droping the files ask them to drop using time stamp in another directory and an external validation is required .. and after validation push single file to Source directory using batch file..
i.e use a batch file using run time operating system or make that batch file to run at OS level ..
where the batch files needs to validate the time interval of the file and needs to push a single file to the source directory.. where from there we can directly pick a single file and process..
regards,
Kishore

Similar Messages

Want To Pick a single file from the Source Directory

Hi,
My Scenario is File to Proxy. Legacy team is generating Bunch of files in a same directory.But i want to pick single file for each poll interval. after process teh firts file only Sender Adapter should pick and process the next file .
At prsent , My scenario is picking all the files in a single shot and all the files are processing parellelly. . But all the files are related to one Process Order So, out of bunch of files some few of files are processing successfullu. remaining all teh files are getting " Proces Order is locked by another User" Error message . This was happeing only for the parellel processing. And from technical point of view , In sender Communication Channel i have used Quality of Service is Exactly Once in Order and i have mentioned the Queue name also. .
Evel legacy team is generating Bulk of files i want to pick a single file only, suppose if theer is no chnace then at least i want to process single file at a time after finishing the one file processing , then only i want to go for the next file
For this, is teher any paremeters need to be set , please suggest me,.
Regards
Jain

At prsent , My scenario is picking all the files in a single shot and all the files are processing parellelly.
Are you using the Additional Source Files options?
What you can do :
1) Select Processing Tab > Processing Sequence> By Date
2) You can introduce a delay between two processing by using a Thread.sleep(msec) statement in some UDF in your mapping...this will ensure some delay between two processing: Re: Delay in MM possible ?
3) You can select the Connect Mode option as Per File Transfer.....keep it as the last option....
Regards,
Abhishek.

I want to change my recorded files from the compressed format to a normal WAV format

i want to change my recorded files from the compressed format to a normal WAV format

I GET A SOFTWARE FOR THIS REQUIRMENT
GO TO
http://www.riverpast.com/en/prod/audioconverter/download.php.
BUT THIS DOES NOT SUPPORT BATCH CONVERTING ALSO IT IS NOT FREE
IF U WANT TO A SOFTWARE SUPPORTS BATCH CONVERTING U CAN CONTACT ME

Playing the audio file from the point of mark

Hi All, i want to play a audio file from the point of mark.
i have used mark() method to mark but when i play the audio it is still playing the audio from the starting point. please help me.

Hi,
Question:
1. You have a folder for each DVD whose video contents you edited.
Answer: Yes
Question:
You talk about projects 34, 35, 36, 37. Are these projects associated with only one specific DVD?
What is supposed to be in each project - just edited VTS_01_1.VOB or edits from the others in the series
such as VTS_01_2.VOB, VTS_01_3.VOB, etc.
Answer:
Project 34 has edited Premiere Elements file 34 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#34
Project 35 has edited Premiere Elements file 35 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#35
Project 36 has edited Premiere Elements file 36 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#36
etc.
Question:
2. If you screen each DVD video file VOB for a given DVD disc, does the content follow sequentially and cleanly?
Answer:
Yes
When I run the VST_01_1.VOB, VTS_01_2.VOB, etc from each project the audio and the video are clean and match.
When I run the edited Premiere Elements file that were created after project 34 edited Premiere Elements file project 35, 36, 37 etc. I am getting the audio from project 34
When I run the edited Premiere Elements file that were created before project 34 edited Premiere Elements file project 1, 2, all the way to 33. I am getting the correct audio
Thanks,
Ron

If I secure my browser using CISecurity's baseline for Firefox, can I copy all the ".js" files from the hardened system to another?

I own multiple systems. I have hardened one browser following the guideline provided by CISecurity. Instead of repeating all the configurations performed on that one system, can I just copy all the ".js" files from the secured system to my other systems?
The ".js" files can be modified using a text editor. Is there a way to lock down these files to prevent modification?

Dear Joel
i know two ways to prevent browser from caching your files
First : The Hard way
just add ? +Math.random() in the end of your file
Like this :
in HTML :
<script type="text/javascript">
(function(){
     var e = document.getElementsByTagName("script")[0];
     var d = document.createElement("script");
     d.src = "index_edgePreload.js?"+Math.random()+"";
     d.type = "application/javascript";
     d.async = true;
     d.defer = true;
     e.parentNode.insertBefore(d,e);
</script>
instead of this Line in HTML that created by EA :
<script type="application/javascript" src="index_edgePreload.js></script>
Disadvantage : you should do this for all of files you want to prevent from caching
===================================================
Second : The easyest way
You Should have Access to .htaccess file in your Server
Open your .htaccess file and paste these codes in it :
ExpiresActive On
ExpiresByType application/json "access plus 1 seconds"
ExpiresByType text/json "access plus 1 seconds"
ExpiresByType text/plain "access plus 1 seconds"
ExpiresDefault "access plus 1 month"
you can type what ever type of file you want to prevent from caching in browser
Advantage : after do this in your .htaccess file all files with the type you want will not Cache in your browser
Easy is'nt it ?
Zaxist

Will imovie 11 (version 9.0.8) be able to import the MP4 files from the Canon Vixia HF R 400?

I realize the camcorder is just available now but I assume the MP4 files are the same as in the R300 from last year. I just want to be sure that imovie 11 will be able to import andedit the MP4 files from the canon Vixia before I purchase the camera.I understand that imovie has trouble with some MP4 files and works fine with other ones. I don't want to transcode into another format and generate gigantic files of data. I also understand that the videos with AVCHD has better video but I prefer a easier workflow. I imagine one day Apple in it's infinate wisdom will eventually support AVCHD.

jerry kaplan wrote:
… I would love to see an article explaining these real world differences and suggestions on which to use. …
two options:
• not exhausting - go to
http://help.apple.com/imovie/cameras/en/index.html
these devices are tested by Apple 'bout functioning with iM
choose one = works. guaranteed.
• exhausting - learn about codecs, containers, bitrates .....
in short: AVCHD is a standard, details e.g. here at wiki
standard means: some settings are conform, some not. example: no 120fps in AVCHD.
note: there's vers1 and there's a new vers.2 .......
mp4 - just a container, or 'wrapper'.
means: like a box of chocolate, you could never know what's inside. example: 120fps in mp4.
but ........
AVCHD nor mp4 are 'codecs'.
here comes h.264 - could be in a AVCHD/mts, could be in a mp4.
iMovie: respects standards.
does NOT import non-standards-conform files/videos/datas.
encode a 1080video as 30p/h264 = would 'fit' into AVCHD
encode a 1080video as 60p/h264 = would 'fit' into AVCHD2 (=not supported by iM11), would 'fit' into mp4 (= iM11 supported) ...
mp4 is more ... 'open minded', more general; lacks therefor stuff like gps location data and other meta-tags.
the next iM13 should support AVCHD2, it's bigger brother FCPX does .....
last word:
iMovie is NO general 'cuts all movin' pictures'-app!
it is meant for consumer convenience with consumer devices.
=> supports the most 'popular' standards. not anything.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

To Mickey: I got the 2 RAR files into one directory, extracted the part1.rar file, and in that new folder there is a file called start.html. I opened this, and followed the links on the right, from "Welcome" to "Getting Started". After all this I had the SAP Management Console, as well as the Database Manager applications created. You will find the specific instructions for setting up the MaxDB under the "Getting Started" link. After setting up the Database Manager you have to start it up with a user-id and password which was created during the set-up, and specifically link the database to the NSP system. I seem to remember that this didn't work at first, because the Database Manager shortcut does not run the program as an administrator. So run it as an administrator! I altered the shortcut's properties under the shortcut/advanced so it will always run the program as an administrator, and haven't had any problems - once you have done the "Add" procedure you may never need to re-visit the database manager.
Edited by: Paul Wright on Jan 8, 2009 2:03 PM

Hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?

hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?

It's a Finder feature, related to Quick Look. You can hit the space bar in the file list to get a preview.
If that doesn't work, you may have an issue witha preference file or similar. I find rebuilding the launch databse works quite well resilving tis kind of thing, as does trashing Finder preferences

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
plus, the wireless connection to TC is too slow for iMovie.
purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
you HAVE to follow advice given here:
http://help.apple.com/imovie/#mov3ac6d42c

I mistakenly remove the Downloads file from the dock. How do I get it back?

I mistakenly removed the Downloads file from the dock. How do I get ii back in the dock?

Choose Home from the Finder's Go menu and drag it back.
(69507)

To Save in Lookout the State file from the application

I need that the program loads the variable values when start up like when it was written or designed. Also, I need that a autotuning process in the application loads and saves by program the values found for 4 valuables, so when the application is started up again, will hold the result of the last autotuning and all the rest like when was written the application. I think to save the State File aafter the autotuning can be a way.
How get this? Other ways?

JTJams is absolutely right! You don't want to depend on the state file for mission-critical settings. DataTable and the XLS file is a good approach.
Having said that, would like to add the following for completeness: the state file can be used for not-so-critical settings. As you know, the L4T file gets saved automatically; every hour by default. You can however make this as low as 1 minute. It also gets saved when the process is closed.
One trick you can do (as explained in the online help), for a particular process whose state you want to preserve: bring the process to the right state, go into its properties and uncheck the "Save state file every..." check-box. Close the process thus saving its L4T file. Now, change the file-permissions
on this L4T to read-only. From now on the process gets loaded with this state.
My two cents..
Regards,
Khalid

How to load the sequence file from the process model?

Does anyone have an example process model that loads a sequence file? The out-of-the-box process models assume the sequence file is already loaded. I want the process model to identify the UUT type and load the appropriate sequence file based on that.

Mark,
A better solution to your question can be accomplised if you have TestStand 2.0.
Within the entry point of a process modle you can set the client sequence using Execution.ClientFile(). This is a new method of TestStand 2.0. It was specifically designed so that you could dynamically set the client sequence within the process model.
Currently the entry points in the default process models (i.e. Test UUTs and Single Pass) are configured to Show Entry Point When Client File Window is Active. This means that you must open and have active a client sequence file before you can execute one of the entry point. You probably do not want this implementation if you are going to set the client file during the entry point execution. To change this you will need to go the sequence properties of your entry point (while the sequence is open select Edit>>Sequence Properties), switch to the Model tab of the entry point's property dialog box, and enable Show Entry Point For All Windows. The entry point will then appear whether or not you have an open sequence file active.
You will need to add at least 3 steps to your entry point sequence that all use the ActiveX Automation Adapter. Remember that MUST disable Record Results for any step you add to the process model. The 3 steps will perform the following tasks:
1) Obtains a sequence file reference of the file that you want to be the client sequence file. You will need to use the Engine.GetSequenceFileEx method. You will need a local variable (ActiveX data type) in which to store the sequence file reference.
2) Set the client sequence file using the Execution.ClientFile property.
3) Close the reference to the client sequence file in the Cleanup step group of your entry point sequence using Engine.ReleaseSequenceFileEx
I am attaching a SequenceModel.seq file (the default process model in TestStand 2.0) in which we have modified the TestUUTs entry point as described above.
Note that you'll be prompted to enter the path to your client sequence file. This is a message popup that you can delete and it was added for your review only.
Good luck in your project,
Azucena Perez
National Instruments
Attachments:
sequentialmodel.seq ‏164 KB

Read the pdf file from the Third party server.

hi all,
we got the requirement that we have to display the salary statement and form16 in the portal.
we are not using the sap for the pay roll.
pay roll will run by the third party....they will keep all salary slips in the one folder under the server.
so from the third party server we have to get the salary statement in to our application......third party will storing the file with salcode.pdf.
can you help me to resolve this?
Thanks in advance
swapna

Hi yugedhar,
thank you for the reply.
the pdf files will be available in one common folder , with in the server only.
so i have to implement the code to download the file from the one particular location based on the name of the file
(means if file name =Login id that has to open)
so can you help me implement this logic .
Thank you
swapna

I can't able to open the *.log files from the firefox browser and i need to open the file inside the frame

If i open the log file from firefox browser it is not open and throws an error as
"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (e) isn't associated with any program or is not allowed in this context."

What type of log file?
What is the file name?
What is the file path or URI?

I want to Pick the Single file from The source Directory

Similar Messages

Maybe you are looking for