I want to select value in combox based on another combox in matrix

Please answer frequently

Hi
You van use the follwing code.
Case BoEventTypes.et_COMBO_SELECT
                            If pVal.ItemUID = "Matrix" And pVal.ColUID = "Combo" Then
                                Dim oCombo, oCombo1 As SAPbouiCOM.ComboBox
                                Dim oMatrix As SAPbouiCOM.Matrix
                                oMatrix = Me.m_SBO_Form.Items.Item("Matrix").Specific
                                oCombo = oMatrix.Columns.Item("Combo").Cells.Item(pVal.Row).Specific
                                oCombo1 = oMatrix.Columns.Item("Combo1").Cells.Item(pVal.Row).Specific
                                If oCombo.Selected.Value = "Value" Then
                                    oCombo1.Select("Value1", BoSearchKey.psk_ByValue)
                                End If
                            End If
Regards
Rupinder

Similar Messages

Default value of prompt based on another request

Hello:
I have a requirement where I need to set default values of prompts based on another request.
The prompt is a Date Prompt.
I tried it using presentation variable, and writing sql query, where is says " WHERE promo_id= @{variable}"
but it is still not working.
Please let me know the workaround for this issue.
Thank you.
- Vinay

How is the End Date determined for your BETWEEN operator? I would assume that is variable. Also, is the second report on another dashboard page or on the same page? Assuming both reports are on the same page, do the below. If not, you can use the same prompts on the second dashboard page. Set the scope to "dashboard" and the selection the user makes carries to the second page.
The easiest way is to have 3 Dashboard prompts: Promo_ID, Start_Dt, and End_Date. Set these prompts to PVs: pvPromoID, pvStartDate, and pvEndDate, respectively.
Filter report one on pvPromoID and pvStartDate.
Filter the second report on pvPromoID and use pvStartDate in the filter of the Date column of report two. Assuming the BETWEEN values are variable, then you can write the following on the Date column of your second report:
"Table Name"."Date ColumnName" <= '@{pvStartDate}' AND Table name"."Date Column Name" <='{EndDate}'
And on your Promo column, use the filter "Table Name".Promo = '@{pvPromoID}'
When the user selects the Promo ID, Start Date and End Date from the prompts, both the first and second reports will be filtered accordingly.

How to make Multi Select Picklist Field Required Based on another field

Hi,
I want to make one filed which is Multi select Required(mandatory) based on certain value in another filed.
I tried putting IIf([<FieldNAme>]> 1000 AND [<FiledNAme1>] IS NULL,"Invalid",[<FieldNAme>]) in the Field validatation as but it is not working.
Please suggest any workaround available.
Warm Regards
Pramod
Edited by: user11361975 on Jun 3, 2011 5:03 AM

I guess FieldName1 is the multiselect picklist you are referring to?
Where did you get the ITAG from? I don't see any multiselect picklists available in Expression Builder. I doubt whether you can set validations on multi select picklists at all.
If anyone has achieved this please let me know as well.
Regards,
Udaya

Is it possible to pass selected value from one jsp to another jsp page?

In my welcome page(in jsp), if the user is selecting some values, is it possible to pass those values to another jsp page and display?
If yes, how can it be done?
please help..

Yes, you would have to make the motion from one page to the next submit a form. Then on the second JSP you can use request.getParameter("nameOfInputField") to get the value the user selected.

How to set column value to blank based on another column's condition in validation settings in sharepoint 2010?

I need to set a field to be blank when another field is blank:
when [Return Date] is blank [when item has not been returned]
[Received by] should be set to blank
I tried this:
=IF(ISBLANK([Return Date]),ISBLANK([Received by]),TRUE)
But it failed.
Is this possible through list validation settings?

Hi
you cannot reference another column in a formula that creates a default value for a column.
PF below link for the same.
http://ricardoramirezblog.wordpress.com/2013/05/02/calculated-field-formulas-for-default-value/
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

How to get value in previous column and another row from Matrix with Custom Code?

I want to calculate the value of tb_Open and tb_Close. I try to use custom code for calculate them. tb_close is correct but tb_Open is not correct that show value = 0 .
This is example report:
* I have 2 Dataset , Dataset1 is all data for show in my report. Dataset2 is only first Open for first month
* First value of Open is item field in Dataset2 and this value only for first month (january). But for other month Open value get from Close in previous month.
Detail for Red number:
1. tb_Open -> tb_Close in previous month but first month from item field in Dataset2
expression =FormatNumber(Code.GetOpening(Fields!month.Value,First(Fields!open.Value, "Dataset2")))
2. tb_TOTAL1 group on item_part = 1
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)))
3. tb_TOTAL2 group on item_part = 3 or item_part = 4
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) + ReportItems!tb_TOTAL1.Value )
4. tb_TOTAL3 group on item_part = 2
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) - ReportItems!tb_TOTAL2 .Value)
5. tb_Close -> calculate from tb_TOTAL3 - tb_Open
expression =FormatNumber(Code.GetClosing(ReportItems!tb_TOTAL3.Value,ReportItems!tb_Open.Value))
My custom code:
Dim Shared prev_close As Double
Dim Shared now_close As Double
Dim Shared now_open As Double
Public Function GetClosing(TOTAL3 as Double,NowOpening as Double)
    now_close = TOTAL3 + NowOpening
    prev_close = now_close
    Return now_close
End Function
Public Function GetOpening(Month as String,NowOpen as Double)
    If Month = "1" Then
        now_open = NowOpen
    Else
        now_open = prev_close
    End If
    Return now_open
End Function
Thanks alot for your help!
Regards
Panda A

Looks okay to me.
Perhaps the variables should be declared as public (?)

How to use SQL import to set the attribute value based on another?

Hello all,
I want to set an attribute of a dimension based on another attribute (if matches). Let's say I have a dimension PRODUCT. And I have defined two user defined attributes MANAGER and ISVISIBLE.
Now within a PERMIT_READ program I want to set the ISIVISIBLE to true where the MANAGER Value is selected from a table.
Something like
<define a cursor c1 to select all the Manager values>
sql import c1 into -
:MATCHSKIPERR PRODUCT_MANAGER then <PRODUCT_ISVISIBLE (PRODUCT MANAGER) = true>
<etc>
Obviously the above is not correct. But I am stuck as to how this can be done? Can some one on this forum please help me with correct syntax/ approach please?
Thanks a lot.
Pxsheth
This statement assigns true to the isvisible attribute for every gc_dim_bu dimension (selected as part of cursor c1).
SO FAR SO GOOD.. NOW -
If I want to change the above so that the attribute value gets assigned based on another attribute for the dimension (say a flag). i.e.
Set the isvisible to true where attribute flag has a certain value. How do I code this in OLAP DML?

There are a number of ways to do this. If you want to use an attribute that has been defined within AWM as an attribute of Product then simply using the mapping tool to populate the attribute as part of the normal dimension load procedure.
Alternatively you could create an attribute at the DML level, and assuming you are not using surrogate keys, you can then define a cursor to read the relational table to populate your attribute. Something like this:
sql declare MKT_BASKET cursor for -
select PRODUCT_ID, PROD_MGR , PROD_VISIBLE -
from PRODUCT_DIM
if SQLCODE ne 0
then goto ERROR
sql open MY_CURSOR
sql fetch MY-CURSOR loop into :append PRODUCT, :PRODUCT_MANAGER, :PRODUCT_ISVISIBLE
sql close MY_CURSOR
sql cleanup
update
commit
If you want to create a complex PERMIT function using OLAP DML then personally I would create a formula and assign a program of type BOOLEAN and have the program return a YES or NO depending on the outcome of your test. Then your PERMIT_READ still references a dimension object. For example:
DEFINE PROD.ISVISIBLE BOOLEAN FORMULA <PRODUCT>
EQ PRG.ISVISIBLE(PRODUCT)
DEFINE PRG.ISVISBLE PROGRAM BOOLEAN
The program will then return Yes or No depending on the processing you need to do.
Hope this helps
Keith Laker
Data Warehouse Solution Architect
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

ADF Get selected values from Dynamic Lists

Hi,
I have a created a dropdown list box where the list gets value through a managed bean. On commit I want the selected value to be saved into the CardiacV1EchoSched column of the Entity object (database). The source looks like this.
<af:selectOneChoice value="#{bindings.CardiacV1EchoSched.inputValue}"
label="#{bindings.CardiacV1EchoSched.label}"
valuePassThru="true">
<f:selectItems value="#{TTrack.carScheList}"/>
</af:selectOneChoice>
The problem is that getCardiacV1EchoSched() in the entity object class is null. The selected value does not get passed into #{bindings.CardiacV1EchoSched.inputValue} at all. If I bind the value to a variable in managed bean I get the selected value.
Thanks in advance,

Hi,
not sure which business service you use to update the database, but if you use ADF Business Components then you need to call the commit operation
Frank

Alternative component selection in prodn order based on stock availablity

Hi,
I have defined two components in BOM as ROH1 and ROH2 are alternate of each other with setting ROH1 is with priority 1 and strategy 2 -100% and ROH2 with priority 2 and strategy 2 . Stock of ROH 1 is 10 EA and ROH2 is 40 EA . When I create Production order for FG for 50 EA ,system calculates the requirement for ROH1 and ROH2 as "0" which is correct as per the alternative definition since no component is available 100% .Other way to use probability ,that also is not suitable for the scenario.
Here is it possible to select ROH1 ,10 EA and then ROH2 as 40 EA so that FG can be made in 50EA because components are available for required quantity.
Client wants to select the alternative component based on stock availability so that first it should select ROH1 for the available qty and then ROH2 for the remaining qty .
Thanks and regards,
Nanhe Babu

Hi,
May be u can maintain BOM and while selecting component let him go to LIST and select the maintained component. This may reduce ur errors for selecting.
Regards,
NNR

SELECT VALUES FROM OBJECT TYPES

Hi
I want to select values in a object types in a table over the database link.
like
select name from [email protected]
where name is of type varray of varchar2(100)
and db.com is database link.
It is giving me error ORA-22804.
Oracle supports this or not?

SQL> var a refcursor
SQL> declare
2   bb emp%ROWTYPE;
3 begin
4   select * into bb from emp where rownum = 1;
5   open :a for select bb.ename ename, bb.empno empno from dual;
6 end;
7 /
PL/SQL procedure successfully completed.
SQL> print a
ENAME                                 EMPNO
SMITH                                  7369Rgds.

Error :Value of restricted LOV parameter not among the selectable values

Hi,
I am designing a report which has two layouts. I have a parameter :P_Reason_code which is applicable to only one layout.
There is a repeating frame in my first layout which should display only if :P_Reason_code value is 'Y'.
I have wriiten a format trigger for this repeating frame saying the repating frame should return true if :P_Reason_code value= 'Y'.
else, it should return false meaning it shouldnt display.
:P_Reason_code is an optional parameter when i run it at the oracle apps front end.
The problem that i am facing is that when i run the report for the second layout by not providing value for the parameter :P_Reason_code
, it errors out saying "REP-0788: Warning: The value of restricted LOV parameter P_REASON_CODE is not among the selectable values.'
I tried creating another user parameter P_REASON_CODE1 and putting a trigger in the After parameter form trigger saying
if P_REASON_CODE is null then
P_REASON_CODE1 :='Y';
P_REASON_CODE := P_REASON_CODE1;
ELSE
P_REASON_CODE1 := P_REASON_CODE;
P_REASON_CODE := P_REASON_CODE;
END IF;
But still it doesnt seem to work.
What could be the issue?
Can anyone help?

try setting the default-value for the parameter to Y (or whatever value is in the LoV defined for the parameter).
Is there a parameterform used for the report. If not remove the LoV from the parameter.

Display list items based on another list item

Hi All
            I want to display the list item based on another list item, but its not working.
This is my code:
/*WHEN-NEW-FORM-INSTANCE*/---Its working.
DECLARE
   rg_district   recordgroup;
   rg_name       VARCHAR2 (40) := 'district';
   vtemp         NUMBER;
BEGIN
   rg_district := FIND_GROUP (rg_name);
   IF ID_NULL (rg_district)
   THEN
      rg_district :=
         CREATE_GROUP_FROM_QUERY (rg_name,
                                  'select dist,dist from district_mas'
      vtemp := POPULATE_GROUP (rg_district);
      POPULATE_LIST ('BLOCK3.DISTRICT', rg_name);
   END IF;
   END;
*/WHEN-LIST-CHANGED*/---Not working. Cannot populate the list based on the List
   DECLARE
   rg_branch   recordgroup;
   rg_name1     VARCHAR2 (1000) := 'branch';
   vtemp       NUMBER;
BEGIN
   rg_branch := FIND_GROUP (rg_name1);
   IF NOT ID_NULL (rg_branch)
   THEN
      DELETE_GROUP (rg_name1);
      rg_branch :=
         CREATE_GROUP_FROM_QUERY
            ('rg_branch',
                'SELECT branch FROM dist_branch WHERE district IN (SELECT DIST FROM DISTRICT_MAS WHERE DISTRICT ='
             || :BLOCK3.DISTRICT
      vtemp := POPULATE_GROUP (rg_branch);
      POPULATE_LIST ('BLOCK3.BRANCH', rg_branch);
   END IF;
   END;
Table:
CREATE TABLE DISTRICT_MAS
DIST VARCHAR2(100 CHAR)
CREATE TABLE DIST_BRANCH
DISTRICT VARCHAR2(100 CHAR),
BRANCH    VARCHAR2(100 CHAR)
Values:
insert into district_mas values('chennai');
insert into district_mas values('coimbatore');
insert into dist_branch values('chennai','chennai_north');
insert into dist_branch values('coimbatore','Podanur');
Regards
Shagar M

Hmm, not tested.
try this..
--*/WHEN-LIST-CHANGED*/
   DECLARE
   rg_branch       recordgroup;
   rg_name1     VARCHAR2 (1000) := 'branch';
   vtemp        NUMBER;
   QT            VARCHAR2(10) :='''';
BEGIN
   rg_branch := FIND_GROUP (rg_name1);
   IF NOT ID_NULL (rg_branch)
   THEN
      DELETE_GROUP (rg_name1);
      rg_branch :=
         CREATE_GROUP_FROM_QUERY
            ('rg_branch',
                'SELECT branch FROM dist_branch WHERE district IN (SELECT DIST FROM DISTRICT_MAS WHERE DISTRICT ='
             || QT||:BLOCK3.DISTRICT||QT||')'
      vtemp := POPULATE_GROUP (rg_branch);
      POPULATE_LIST ('BLOCK3.BRANCH', rg_branch);
   END IF;
END;
Hope this works..
Hamid

Set value of project code to Reciept from production matrix.

Hello Friends,
I want to set value of project code to Reciept from production matrix after selecting Production order number.I have taken project code field in Production order header.That project code value i have to set in Reciept from production. I got the Project code no by query but I cant set it to Reciept from production Matrix project column.
RS.DoQuery("Select U_PrjCode from OWOR where DocEntry='1')
str = RS.Fields.Item("U_PrjCode").Value
oMatrix.Columns.Item("21").Cells.Item(1).Specific.value = str
this code give me an error
"Item-Cant set value on item because the item cant get focus"
Plz give me solution for this..
Thanks & Regards,
Swati

Hello Swati,
The cell should be foucsed before setting value for it. try this:
RS.DoQuery("Select U_PrjCode from OWOR where DocEntry='1')
str = RS.Fields.Item("U_PrjCode").Value
oMatrix.Columns.Item("21").Cells.Item(1).Click()
oMatrix.Columns.Item("21").Cells.Item(1).Specific.value = str
Kind Regards
-Yatsea

Want 2 populate value in 2nd list item based on value selected in 1st list?

Want 2 populate value in 2nd list item based on value selected in 1st list?

Gaurav -
The 3rd list will not populate because nothing has been selected yet in list 2. The value in list 2 is null, so the loop to populate list (3) has nothing to load. Try the following below. This should seed your 2nd list so the 3rd list will populate.
You will have to declare first_record boolean and first_value to match DESCC.
first_record := true; -- NEW *****
Clear_List('BLOCK2.ITEM2');
FOR CurRec IN (SELECT UNIQUE DESCC DESCC FROM LUTT where LUTT.IDD = :BLOCK2.ITEM1)
LOOP
if first_record = true then -- NEW SECTION *****
first_value := CurRec.DESCC;
first_record := false;
end if;
Add_List_Element('BLOCK2.ITEM2',1,CurRec.DESCC,CurRec.DESCC);
END LOOP;
:block2.item2 := first_value; -- NEW *****
Clear_List('BLOCK2.ITEM3');
FOR CurRec2 IN (SELECT UNIQUE DESCC DESCC FROM LUTT where LUTT.DESCC = :BLOCK2.ITEM2)
LOOP
Add_List_Element('BLOCK2.ITEM3',2,CurRec2.DESCC,CurRec2.DESCC);
END LOOP;
My name is Ken, 1990 is when I started using Oracle Forms 3.0, character based in the Unix environments. And you are very welcome.

Passing DB values to the textbox based on Select Value item

Hi,
I am very much new to the Oracle APEX. In my project, I have a requirement wherein I have to pass the different values to the corresponding textboxes on a different page based on the value I select from the "Select Value" item.
I have tried using calling On-Demand Processes, but couldn't get the desired result.
Please suggest!

Hi 796444 ,
Welcome to the forum. It will be good if you familiarize yourself with the forum ettiquittes. Also, when posting always state the following:
a. Apex version
b. DB version
c. Web server ; EPG, apexlistener, etc
d. Provide adequate details for others to understand your problem / what you are trying to achieve.
e. Any code snippets you post should be enclosed in a pair of tags
If your current problem is that the you are *calling* Page 2 from Page 1, and while doing so you want the value of P1_ITEM1 to be passed and set in p2_ITEM1 then
a. Edit the branch
b. In Action in Set these items write P2_ITEM1
c. In With these values write &P1_ITEM1. (do not miss the dot at the end)
It looks good if you use a better handle than 796444 :-)
Regards,

I want to select value in combox based on another combox in matrix

Similar Messages

Maybe you are looking for