I want to send Net Weight for all packages to Requisite

HIo All Abapers,
Currently the Each is the only package that has the true net weight.  The net weight for the other package levels contains the gross weight. So Users are manually setting the correct net weight.
Here I want to Change the interface program to send the net weight for all packages not just the sales unit (Each).
So can any body tell me, what i need to do here..
points will be given..

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

Similar Messages

  • Reg. Net weight for AUOM

    Hi All,
    I have a doubt.
    In Material master for a material i have maintained Gross weight and Net weight.Besides i have maintained AUOM in Additional data tab.
    But here i am unable to key in the Net weight for AUOM and it is getting updated accoridng to the proportion with the net weight of BUOM. The field net weight is non ediatble for AUOM only gross weight is editable.
    Is this standard behavior?
    If i want to edit the Net weight of AUOM means is it possible?
    Kindly advise.
    Regards,
    MBN.

    Hi MBN,
    Gross and net weight will have same unit of measure that would be alternative unit of measure or base unit of measure. Same values will get captured to unit of measure tab from basic data.
    As standard net and gross weight fields are editable. You can check your material  master field setting.
    Regards,
    R.Brahmankar

  • Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

    I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
    Here is a test for my mac.
    EtreCheck version: 2.1 (101)
    Report generated 4. desember 2014 kl. 22.48.33 CET
    Hardware Information: ℹ️
      MacBook Air (Verified)
      MacBook Air - model: MacBookAir6,1
      1 1.7 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1366 x 768
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:12:8
    Disk Information: ℹ️
      APPLE SSD SM0512F disk0 : (500,28 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
      Core Storage: disk0s2 499.42 GB Online
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store
    Kernel Extensions: ℹ️
      /Applications/Parallels Access.app
      [not loaded]  com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
      /Applications/Parallels Desktop.app
      [not loaded]  com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
      [not loaded]  com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
      /Library/Application Support/Kaspersky Lab/KAV/Bases
      [not loaded]  com.kaspersky.kext.kimul.38 (38) [Support]
      /Library/Extensions
      [loaded]  com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
      /System/Library/Extensions
      [not loaded]  com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
      [not loaded]  com.kaspersky.kext.klif (2.2.1d19) [Support]
      [not loaded]  com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
      [not loaded]  com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
      [not loaded]  com.zg.driver.cdc_ecm_qmi (1.9) [Support]
      [not loaded]  com.zg.driver.cdc_usb_bus (1.9) [Support]
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded]  com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
      [not loaded]  com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
      [not loaded]  com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
    Launch Agents: ℹ️
      [running]  com.brother.LOGINserver.plist [Support]
      [loaded]  com.google.keystone.agent.plist [Support]
      [loaded]  com.oracle.java.Java-Updater.plist [Support]
      [running]  com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
    Launch Daemons: ℹ️
      [loaded]  com.adobe.fpsaud.plist [Support]
      [loaded]  com.google.keystone.daemon.plist [Support]
      [failed]  com.kaspersky.kav.plist [Support] [Details]
      [loaded]  com.macpaw.CleanMyMac2.Agent.plist [Support]
      [loaded]  com.oracle.java.Helper-Tool.plist [Support]
      [loaded]  com.oracle.java.JavaUpdateHelper.plist [Support]
      [running]  com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
      [failed]  com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
    User Launch Agents: ℹ️
      [running]  ca.indev.MailTagsHelper.agent.plist [Support]
      [loaded]  com.facebook.videochat.[redacted].plist [Support]
      [loaded]  com.genieo.completer.download.plist Adware! [Remove]
      [loaded]  com.genieo.completer.ltvbit.plist [Support]
      [running]  com.genieo.completer.update.plist Adware! [Remove]
      [not loaded]  com.macpaw.CleanMyMac.helperTool.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
      [loaded]  com.parallels.mobile.startgui.launchagent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper  ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      fuspredownloader  ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      nplastpass: Version: 3.1.61 [Support]
      JavaPlugin2_NPAPI: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    userinternetplugins ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      Facebook Cleaner
      Pin It Button
      LastPass
      ResizeMe
      OpenIE
    3rd Party Preference Panes: ℹ️
      Cineform  [Support]
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
      Destinations:
      Data [Network]
      Total size: 3.00 TB
      Total number of backups: 65
      Oldest backup: 2013-08-15 20:20:51 +0000
      Last backup: 2014-12-04 17:20:31 +0000
      Size of backup disk: Excellent
      Backup size 3.00 TB > (Disk size 496.30 GB X 3)
    Top Processes by CPU: ℹ️
           4%  WindowServer
           1%  fontd
           1%  cloudd
           0%  Safari
           0%  launchd
    Top Processes by Memory: ℹ️
      369 MB  com.apple.WebKit.WebContent
      155 MB  Safari
      103 MB  Feedback Assistant
      86 MB  Finder
      69 MB  mds_stores
    Virtual Memory Information: ℹ️
      4.52 GB  Free RAM
      2.60 GB  Active RAM
      652 MB  Inactive RAM
      820 MB  Wired RAM
      1.04 GB  Page-ins
      0 B  Page-outs
    Diagnostics Information: ℹ️
      Dec 4, 2014, 10:37:00 PM  Self test - passed

    [loaded]  com.genieo.completer.download.plist Adware! [Remove]
      [loaded]  com.genieo.completer.ltvbit.plist [Support]
      [running]  com.genieo.completer.update.plist Adware! [Remove]
      [not loaded]  com.macpaw.CleanMyMac.helperTool.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
      [not loaded]  com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded]  com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    Your machine is slow because you loaded a bunch of third party junk on it.

  • My ipod doesnt work n i want to send it back for retailing is it free of do you have to pay if yes then how much?

    my ipod doesnt work n i want to send it back for retailing is it free of do you have to pay if yes then how much?
    (it jus keeps on buffering insted of turnoing on)

    If covered by warranty and the iPod is defective and not abused Apple will exchange it at no cost.
    For how to send it to Apple see:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    You can make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    However, have you tried:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Want to take "CREATE script" for all roles existing in DB.

    Hi All,
    I want to take "CREATE script" for all roles existing in DB.
    Please provide me script to generate if you have or suggest any link or doc.
    Oracle 10G

    Use this-
    select 'select dbms_metadata.get_ddl(''ROLE'','''||ROLE||''')||chr(10)||''/'' from dual;'
    from dba_roles
    Please be aware grants will not come in the definition
    If you like the answer then don't forget to give points

  • [SOLVED] -Qkk shows "no mtree file" for all packages

    When running pacman -Qkk after the upgrade to 4.1.0, I am now getting "no mtree file" for all packages on my system. These errors did not occur prior to the upgrade, and I upgraded no other packages. Does this indicate breakage? How should I fix this?
    Last edited by cdown (2013-04-05 02:05:35)

    Allan wrote:The only way to fix this is to rebuild all packages using makepkg from pacman-4.1....
    So this is not breakage that I can fix on my end, then?
    I looked at the libalpm source for information about mtrees, it looks like they are used to provide package integrity validation, but it's possible I'm wrong since I only read a small part of the code on mtrees. I'd appreciate information about what they are and what issues lacking them could cause.

  • Want to run compensation process for all employee at once.

    Dear All,
    I have created Compensation Adjustment which use an user exit to read employee appraisal and create the compensation amount.
    its working fine by this transaction code HRCMP0001C - Change .
    but i want to run for all employees simultaneously, and here on this transaction, its only one employee can be select at a time for compensation adjustment.
    any body hv any idea how to run this compensation process for all employees at once?
    thanks in advance

    there is one option available in Edit >Spreadsheet. but it giving an error.
    Error while generating document
    Message no. SOFFICEINTEGRATION141
    Diagnosis
    An internal error occurred in the SAP Document Container Control.
    Procedure
    If the error recurs, enter an error message. There are notes related to how to create a log file using the report SAPROFFICEINTEGRATIONTRACE.
    any body hv idea how to solve it?...thanks

  • Global Defined Table - Existing for single package only or for all package

    Hi Folks,
    I got a question around global fields in start routines of transformations.
    Lets say I have defined in the global section a table that should hold some lookup values retrieved in the start routine (e.g. material attributes for all material number entries in the data package). Later this table is used in the transformation to "fill fields" for the target cube.
    Will this table be "initiated" for every package so it will hold only the data the start routine put there.
    Or is it "existing" throughout the whole update process and every new package will "add" records there so overtime it will grow from package to package?
    Thanks and best regards,
    Axel

    Use a simple trick to get around.
    IF sy-uzeit < 060000.
       load_date = sy-datum - 1.
    ELSE.
      load_date = sy-datum.
    ENDIF.
    Edited by: Dirk Herzog on May 24, 2011 10:44 AM

  • Idea of sending a message for all connected users.

    Dears,,,
    I'm trying to develop through oracle forms an idea of sending a pop-up message to all connected users.
    Example, I need to inform users to quit in 5 minutes due to a restart to the application server.
    I thought about a timer trigger that will check every 5 seconds or 10 seconds a value somewhere in a table. But I don't want to use the timer triggers associated in oracle forms.
    Is there any idea ?
    Please let me know.
    Joe

    Use Iframe tag.
    For this:
    Add an “IFRAME” in the base html file used (for example basejpi.htm file)
    <NOEMBED>
    </COMMENT>
    </NOEMBED></EMBED>
    </OBJECT>
    <!-- Forms applet definition (end) -->
    %HTMLafterForm%
    <IFRAME SRC="/forms/java/iframe.html">
    </BODY>
    </HTML>
    Then create an html file named "iframe.html" with the following content :
    <HTML>
    <HEAD>
    <meta http-equiv="refresh" content="10">
    </HEAD>
    <BODY>
    <H1>Please disconnect, The system will go Down !!!!</H1>
    </BODY>
    </HTML>
    Every time you would like to send a message, just add it in the iframe.html file ans users will see it.
    The iframe size can be customized.

  • Want to send public message to all oracle apps users while instance up

    Dear
    For the oracle apps & db maintenance activities, i would like to send public message, example 'Application will not available for 30 minutes from now'. This message must pop-up on user session. How can i achieve this?
    Help me!

    Ateeq,
    I do not think it is possible to send an alert message to all users notifying them that the system will be down. However, you can follow the steps in the following note to redirect the users to a different page or let them a get "The System is now Down for Maintenance" alert message.
    Note: 752540.1 - How To Redirect Some Users To Another Website While The Rest Of The Users Get The Normal "The System is now Down for Maintenance" Alert Message When the System Is Down For Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=752540.1
    You may also review:
    Note: 310969.1 - How To Configure & Run Apache in Restricted Mode During Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=310969.1
    Regards,
    Hussein

  • I want only one apple ID for all my devices

    I have an apple ID and so does my wife.  Between the four family members we 8 plus apple devices.  I want to put everything on hers and just have one.  Mine has the least amount of music and apps.  Can it be done? How do you do it without losing anything?

    What exactly are you wanting to do. It is a little unclear from your post. You've also posted in the iTunes Match forum. Does your question have something to do with iTunes Match?
    Keep in mind that if you all have your own content purchased with indvidual iTunes Store accounts, trying to consolidate is going to cause everyone big headaches. But if you give us more details perhaps we can help you sort it out.

  • I updated my iPhone with latest update.  I was asked if I wanted to communicate with iCloud for all my devices.  I chose yes.  I than am told I need to check my email to verify my account and there is not an email for apple to verify

    I updated both my iPad and iPhone with latest update.  Love it!  However, I wanted to use the find iPhone using iCloud feature.  From the beginning of update it kept prompting me to verify my account when I wanted to use iCloud ???  Apple kept telling me to check my email to verify my account and there is not an email from them.   And I'm not talking about verifying by my alternate email which I was successful at.

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • Sending an email to all email addresses for a contact in a Group

    I recently compiled a Group of contacts so that I could send out a Christmas email. These days most people have more than one email address. From what I understand, Mail will send it to the first email listed on their Address Book card. What if I wanted to send the email to all of their emails listed on their card? Is that possible?

    Slippers wrote:
    Another suggestion is to have multiple groups which feed a "master" group. For example, Jane Doe has two email addresses (home and office) which I need to use in a single email message.
    I create a master group calling it "Soccer". For the Distribution List, I use Jane's home email for Group 1 and Jane's work email for Group 2. I then drag and drop Group 1 and Group 2 into the "Soccer" group.
    This isn't perfect, but it doesn't require you to have duplicate contacts.
    Hope this helps someone.
    very ingeneous!

  • I have no longer got the contacts symbol.  when for instance I want to send a mail....thanks for your help been

    Hello,
    I had to re-initialized my iTouch (ios5.0.1) and since then I have no longer got the contacts symbol. However my contacts are still there when I want to send a email for instance, but I can't add any like before when this app was in.
    Thanks for your help
    Bruno

    Sorry, but I don't know of any other way.  Perhaps you can leave feedback to Apple on this.
    http://www.apple.com/feedback/ipodtouch.html
    B-rock

  • Gross weight and net weight of line item in a delivery

    Hi what exactly the meaning of gross weight and netweight of delivery line item?
    Where can i see these 2 fields in the transaction?How weight differs to the quantity for a particular delivery item?
    Thanks in advane
    Mahesh

    Hi,
    <b>Gross Weight</b>
    The system can use the <b>gross weight</b> at a later stage, depending on what kind of capacity check you run, to check storage bin capacity for warehouse management purposes.
    The system calculates the gross weight of each item by multiplying the delivery quantity by the gross weight per unit that comes from the sales order. If there is no related sales order, the system uses the gross weight from the material master record. You can change the gross weight manually in the delivery document.
    <b>Net weight</b>
    The total net weight of all items in the delivery.
    Use
    The system calculates the net weight of each item by multiplying the delivery quantity by the net weight per unit that comes from the sales order. If there is no related sales order, the system uses the net weight from the material master record.
    Please reward if helpful.
    Thanks & Regards
    Sadhu Kishore

Maybe you are looking for