I was in a chat box with skype and I clicked on the link to copy the text but it came back with "can't copy becuse not permitted in your browser"

I was in a chat box with SKYPE and I clicked on the link to copy the text but it came back with "can't copy because not permitted in your browser"
I can highlight copy and paste from other web screens with no problem.
The chat window however doesn't give access to the lines that have scrolled past the window so highlighting the text won't work. Other chat windows grab the entire text when the user clicks on the copy link or icon.
I just installed firefox and haven't tried other chat windows to see if the problem could be repeated.

Use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard

Similar Messages

Hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

hi guys, I was presented with iPhone and then I rewrote the program, but right now, the ability to such a problem ..... want username and password

I don't understand. What "program" do you mean, and what do you mean by "rewrote"? If you mean that the iPhone has Activation Lock - that is, you restored the iPhone and now it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you.
Regards.

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast. Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
Thank you for your recent iPhone 5 purchase at the Apple Store.
We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
Thank you for shopping with Apple.
Sincerely,
Apple Online Store Team

Text put into a canvas element with context.fillText() always has a black box where each letter goes. If the text is black you just see the black rectangle. If the text is not black you see it on the black bounding box. Surely this is not right.

This has happened on the last few versions of firefox, as long as canvas has been supported. I see other people's screen shots from canvas tutorials, and the text always looks normal. On my system, any text put into a canvas element via context.fillText() will have a black bounding box for each letter, sized appropriately for the letter. If the text is black, of course you only see rectangles. If the text is a contrasting color, then you can read it, but it looks bizarre.

Thomas...same kind of crap here.
I used Custom Text - entered a sentence, hit return, entered another.
Set to 72 pt.
The default alignment is centred - I want left aligned text...the text start point stays at the centre of frame and the sentence runs off the edge of the bounding box.
There is no settings in the Text or Title inspector dialog to correct that!
Using Transform will not sort it!

Is there a way to annotate a PDF by adding a text box any where on the screen rather than having to click on the text box Icon each time? It was like this before I downloaded Yosemite.

I use the Preview app to annotate my notes for class. It use to be where I could add text where ever I wanted on the screen just by double clicking. Now since I downloaded Yosemite I have to click on the text box icon at the top each time and it adds the text box in the middle and I have to move it to where I want it. This is very inconvenient for class. Any suggestions on how to get the old preview back or fix this problem?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

Thanks for your reply:
I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck
I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
I tried several brand new discs from the same box, still no luck.
My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

Postings to G/L accounts with open item management are not permitted in ASKB

Hi Gurus,
I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
1. The ASKB posts only if the APERB_ITEMS is populated?
2. If yes, Why the ASKB wants to create postings on this company code?
3. If no, which are the logic conditions that include a asset in the ASKB execution?
4. If the logic is correct, how i can to run the ASKB on OI accounts?
Thanks in advance,
Best Regards,
Emanuele

Hi ,
I believe you know why do you run transaction code ASKB if not please see below
The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
There are various possible ways of posting APC values:
To an account set within the original company code
To an account set of an alternative company code
To an account set directly in a special ledger
The account set can be determined from a different depreciation area.
Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000 and if you take your ABAper help to under the coding he will tell you that is program use APERB_ITEMS to update and read.
MANY THANKS
REGARDS
Preeti Agarwal

HT201269 I was transferring information from my old iPhone to my new iPhone 5S via iTunes and I have completed the process but my phone will not restart, it is stuck in the "Connect to iTunes" screen. Any ideas?

I was transferring information from my old iPhone to my new iPhone 5S via iTunes and I have completed the process but my phone will not restart, it is stuck in the "Connect to iTunes" screen. Any ideas?

See this article to assist you with your restoring your device once the device is left in recovery mode.
http://support.apple.com/kb/ht1808
good luck

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

Error:An item with no delivery quantity is not permitted.

Hello,
We are receiving an error:
Only 0.00 UNT of material XXXX available.
An item with no delivery quantity is not permitted. Item will be deleyed.
This material has the following details:
Material Group: Asset
Material Type: VKHM
Ref. Mat Type: HAWA
Item Cat Grp: NORM
Industry Sector: A - Plant engin./ construction
I believe asset is not quantity based. My questions are:
1. Why is it when creating delivery, quantityis necessary. However,this was configured as asset?
2. How can i put/add stock in asset?
- In Define Attributes for material types, i searched for VKHM, and it was already maintained.
- Area for quantity/ value updating: both were ticked: By Valuation Area for Quantity and Value Updating.
- When i go to the folder on the left: Quantity/Value updating; Quantity Updating ang Value Updating were both ticked for Valuation area: 0001, material type: vkhm.
- i also tried to tick Quantity Updating and Value Updating for valuation area (plant name). Butnothing happens.
Thanks in advance for all of the help.

In this case, the reason why the delivery can not be created due to the first error:
Only 0.00 UNT of material XXXX available.
This error has number VL150, which means there is no avaiable stock when you create the delivery. To check how many
avaiblable stock you have, you need to check it in transaction CO09. usually for delivery, you should use check rule B.
In co09, if the ***. ATP qty is 0 or negative, you will get above error and the delivery can not be created. For more information regarding this error VL150, check note 153355 and 1481133.

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Within reason, Pages v5.2 documents are forwards compatible with Pages v5.5.3. Apple introduced the single file format document as a default with Pages v5.5.3 which is not backwards compatible with Pages v5 on Mavericks.
However, they also provided a File > Advanced > Change File Type > {Single File, Package} menu that allows you to change the current Pages v5.5.3 document into the backwards compatible Package type document. You would follow this transformation with a File > Save operation to complete it.

Problem is with my iPhoto on my Macbook air. I am trying to move my library from my airbag onto my passport drive. I did it and deleted it from the airbag but it simply re appeared possibly from the cloud. Not sure what to do next.

The problem is with my iPhoto on my Macbook air. I am trying to move my library from my airbook onto my passport drive. I did it and deleted it from the airbook but it simply re appeared possibly from the cloud. Not sure what to do next. Sorry I am not a techie.

Sorry - we can not see you
what do you have? Version of iPhoto? Of the OS? How is the passport connected to your Mac? What format is the passport (for the iphoto library it must be Mac OS extended (journaled) )? The iPhoto library is not and can not be on the cloud (maybe later with the Photos Application)
LN

Postings to G/L accounts with open item management are not permitted Messag

HI All,
Me activiated New GL. and when I am trying to post the
document, I am getting the below error.
The GL used 200100 is Cash A/c (40)
Cr Eq Share Capital A/c (50)
As Cash A/c requires Clearing, I have activated "Open Item Management".
Can you advice me why Its giving me the below mentioned error.
Thanks
Postings to G/L accounts with open item management are not permitted
Message no. FAGL_POST_SERVICE012
Diagnosis
You use G/L account 200100 in company code RLIF with open item
management. However, postings are not permitted to G/L accounts in
individual ledgers with open item management.
Procedure
If you have not yet made any postings to this account and if the
account is to be used for closing processes in non-leading ledgers,
deactivate the Open Item Management indicator in the company code data
for the G/L account.
Thanks,
Niranjan Yandamuri

Hi,
Please, refer to note 1646466 for the info on this message.
Regards,
Eli

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

I was in a chat box with skype and I clicked on the link to copy the text but it came back with "can't copy becuse not permitted in your browser"

Similar Messages

Maybe you are looking for