I wear my watch on the INSIDE of my wrist, not the OUTSIDE - Will the heart rate monitor work

I wear my watch on the INSIDE of my wrist, not the OUTSIDE - Will the heart rate monitor work/

hello,
my 4s was in os6 and when os7 first released, i have updated it. during update from os6 to os7 after 98% my wifi got disconnected and then phone automatically restarted. since then my back camera is not working. front on is working perfectly. after that i reinstall os7 properly following step by step procedure but no positive result came out.
then i tried to change the camera with a new one but still with new camera the problem is same. then they used my camera in some other 4s and it is working fine. now i dont know what to do.
right now using os7.1.2
please advise.
Salman

Similar Messages

Err: The private key material is not exportable outside of the HSM

Hi,
I am working on weblogic 8.1 with sp4, Using keytool generated certificates with HardwareSecurityModule (HSM) and enabled ssl in weblogic admin console.
Now while starting the server following error is displayed
<Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000327> <Starting WebLogic Admin Server "ncss" for domain "ncqa">
<Oct 4, 2005 3:18:49 PM GMT+05:30> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias srinualias from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
<Oct 4, 2005 3:18:51 PM GMT+05:30> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias srinualias from the nCipher.SWorldkeystore file E:\bea\user_projects\domains\ncqa\srinu.>
com.ncipher.provider.nCSecurityException: The private key material is not exportable outside of the HSM
at com.ncipher.provider.km.KMDSAKey.getParams(KMDSAKey.java:59)
at com.certicom.tls.interfaceimpl.CertificateSupport.CheckIfKeyMatch(Unknown Source)
at com.bea.sslplus.CerticomSSLContext.doKeysMatch(Unknown Source)
at weblogic.security.utils.SSLContextWrapper.doKeysMatch(SSLContextWrapper.java:93)
at weblogic.t3.srvr.SSLListenThread.checkIdentity(SSLListenThread.java:323)
at weblogic.t3.srvr.SSLListenThread.initSSLContext(SSLListenThread.java:169)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:140)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:126)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1637)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:1009)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
<Oct 4, 2005 3:18:52 PM GMT+05:30> <Warning> <Security> <BEA-090552> <The public and private key could not be checked for consistency.>
<Oct 4, 2005 3:18:52 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "ncss" for domain "ncqa" running in Development Mode>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port 7002, ip address *.*>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address *.*>
Please let me know if any clues.
thanks
Ceenu

This is just a warning to let you know that the server was not able to verify whether the private key matches your public key, because it could not get the key from HSM. This is normal. SSL should still work.
Pavel.

How do I count and display events every few seconds and then convert the counted values into events per minute? (for a heart rate monitor)

Hi everyone,
I'm building a heart rate monitor as a final year project with my lab partner using the NI USB-6009 and Labview 2009. We have managed to obtain a signal using a photo transciever, smooth it out and count the events, however the count is incremental.
We wish to count the number of pulses we obtain for a few seconds (5-10 for example) and then use this value to obtain a pulse rate in beats per minute (e.g. 10 pulses in the first 10 seconds would give an estimated BPM of 60 etc etc).
Does anybody have ides on how we could implement this? We have tried timed loops, elapsed time VI's and other things but nothing gives us what we need.
Thanks in advance for any help that is offered.
Jeshua Graham.

We are very new to Labview. We are taking a raw signal from our DAQ and then using VIs to filter and then trigger counts on rising edges. I have attached our vi file to this post for you to look at (I hope that is what you mean by code).
Attachments:
TCRT-1010DAQ_jeshua1.vi ‏367 KB

In the attached VI I dont understand why data from the inner case structures are not being transmitted to the array.

In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
Thank you.
Solved!
Go to Solution.
Attachments:
TEMP.vi ‏25 KB

It took me some time to figure what you are trying to do but I think I have it now.
The SR is still required.
What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
OR
2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
Ben
Message Edited by Ben on 05-05-2010 01:31 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

The song...could not be used because the original file could not be located

I just used Garageband this past Sunday, no problem...I open it up tonight and I get this message:
"The song...could not be used because the original file could not be located."
I click the OK button and it comes up with another song title, and I have clicked it 20 or 30 times already and it keeps coming up and I can't access anything else and it is frustrating!
Anyone know how to stop the madness?!
iMac 2.7 GHz Intel Core i5, 8 GB RAM, 1 TB HD, OS X 10.9.3
Garageband 10.0.2

"The song...could not be used because the original file could not be located."
GarageBAnd cannot find the recorded media or imported audio files, that should be in the Media folder inside your project.
Crtl-click the GarageBand icon in the Dock and use Force-quit to quit your current project.
Then ctrl-click the .band file of your current project and select "Show package contents." open the Media folder inside and check if all recorded media and imported audio files are there and you can play them.
Have you moved your project or has it been transferred by mail?
If the media are missing or do not play, there is not much you can do. If all media are there, repair the permissions of the project. If it is on an external drive, move it to your system drive and try there.
If you cannot rescue the project, copy the media file out of the project, so you can use the recordings to recreate the song.You can launch GarageBand into the file "recent songs" panel to create a new project or to pick a recent project, by holding down the alt/options key while double-clicking the GarageBand icon.

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. be

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection

If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
So far you've posted in the iTunes Store forum :
https://discussions.apple.com/community/itunes/itunes_store#/
And the Using iPad forum :
https://discussions.apple.com/community/ipad/using_ipad#/
If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' : https://discussions.apple.com/docs/DOC-3661
This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview

Just upgraded to the latest version of iTunes. Now I get the message "the Item you requested is not currently available in the US store." When I click on OK, the dialgue goes away, but the store doesn't open. How do I fix this?

Not sure why I am getting this message anyway. I wasn't trying to buy anything. I just upgraded and then I tried to access the store. I had two purchases that I had previously made from a different computer. I was going to download them to this computer as my iPod is synced to this computer and you can only sync it to one computer. I was able to view my account information and from there I was able to click on the Purchased link. I saw the two items and downloaded them. But I received an error about the second album. It said that I didn't have sufficient privileges. When I checked all the songs had downloaded. Only the booklet was missing. Maybe this has something to do with the issue, I don't know. As far as I know, I purchased everything from the US store. I don't even know how to switch to a different store.
In any case, I can't access the store because the item I requested is not currently available in the US store. So why don't they just dump me at the home page instead of blocking me completely.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Firedox did a restart, now it wont open i get the message The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library

firefox did a restart now it wont open, i get the following message,
The procedure point js_UnwrapObjectAndInnerize could not be located in the dynamic link library
have tried system restore but this didnt help

Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
Max

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

I wear my watch on the INSIDE of my wrist, not the OUTSIDE - Will the heart rate monitor work

Similar Messages

Maybe you are looking for