I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?
I would like to display what's on my Mac Pro monitor on my iPad with as little latency as possible. What's the best way to do this?
Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders
Similar Messages
-
I would like to put the results of a proc on a local database into a table in my azure db. What is the best way to do this? I dont see the ability to link. The local db is on my desktop and is mssql12.
McCI am not sure if i set up the linked server correctly here is the schema and an attempt to run a select and the resulting error:
SELECT *
FROM [CN5E6E9LM2.DATABASE.WINDOWS.NET,1433].[Mkerr_db].dbo.addr
OLE DB provider "SQLNCLI11" for linked server "CN5E6E9LM2.DATABASE.WINDOWS.NET,1433" returned message "Unspecified error".
Msg 40515, Level 16, State 2, Line 1
Reference to database and/or server name in 'Mkerr_db.sys.sp_tables_info_90_rowset_64' is not supported in this version of SQL Server.
McC -
In Final Cut Express I have two videos I'd like to merge parts of each video into a final film. What is the best way to do this in FCE?
Hi
I use a slightly different way than Alchroma.
Same
• One video on track 1 and the other on Video.track 2
• Resize to 25% and move one to the left and the other to the right
Diff
• I don't use the blade tool
• I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
Final
• Resize to 100% and Center
Video is done
Audio - very close to this by changing the level so that best audio will dominate
• Pen tool here too
But that's me - the Alchroma way is as good as this or may be better for some
Yours Bengt W -
I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?
NeuroBrain wrote:
Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
This is a common mistake and I highly advise against it.
1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
Seriously, have a read,
Most commonly used backup methods
it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
"Plan for the worst and the good will take care of itself" - Donald Trump -
I've replaced my 10.5.8 with another machine 10.6.8 which as we know doesn't support Apple Talk which has been used to print to 2 bulletproof older printers and an imagesetter. I wan't to keep using the printers and can use the 10.5.8 as a server. What is the best way to do this?
Hi
You could do this a number of ways. Using the LPD Daemon might work best for your location?
First: assign the machine you're going to use as the 10.5.8 'server' a fixed IP address.
Second: add desired printers to that machine using the usual methods.
Once added share them using the Print Sharing option in the Sharing Preferences Pane. On the 10.6.8 machine add the printer using the IP address of the 10.5.8 'server'.
System Preferences > Print & Fax and click the '+' icon. Click on the IP Icon and key in the IP address you previously assigned. Leave the Queue field alone and select the relevant PPD from the Print Using field (see below). You'll have to search for these yourself.
You don't have to 'install' the PPDs on the 10.6.8 machine as such. Simply copying them over from their location on the 10.5.8 machine (use a memory stick to do the transfer) to the same location on the 10.6.8 machine will be enough.
There should be no need to restart.
HTH?
Tony -
I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this
@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe -
URGENT - Items archiving in Portal - Whats the best way to do this ?
Gurus,
My client has following requirement -
- The client has lots and lots of content.
- The content must show on site for 6 months.
- After 6 months, the content goes to archives (meaning - it does not show on site, but that does NOT mean its deleted - its kind of hidden)
- The archive content must be searchable
- After 4 years some content expires while some of it remains in archive forever
Currently, the client stores the content on a file system and there is a process that moves the items after 6 months to an archiving area and after 4 years some content is deleted and some is retained forever.
What is the best way to approach this requirement ?
If there is a solution how to move their existing system (content valid for 6 months and archives for last 4 yrs) to portal ?
Any help would be greatly appreciated.
Thanx
HeroThere are a couple of ways to do this:
1. If the items are all file items and don't have extended attributes, you can just use WebDAV to move the items to an archive location (can be another page or a file system). Use a WebDAV command line utility like sitecopy, combined with the WWSBR_ALL_ITEMS view to select the content. sitecopy should be able to select items based on their last modified date, so you may not have to use the view.
2. If you also want to archive the attributes, or if the items include non-file items, you'll need to use the content management APIs to copy the items to an archive page. Currently there is no delete API, so once you've copied the items you'll have to expire the originals and then manually purge them.
Regards,
Jerry
PortalPM -
Whats the best way to expose this in memory database? (ArrayList)
Hello everyone.
I was looking for advice on how I should implement this...currently I have the following ArrayList that stores ClassEntity objects. I'm going to write 2 classes that need to access this ClassEntity Object arrayList because they are goign to use these objects to spit out 2 different files.
I didn't want to make the database public and static though.
Here's a snippet of my current class that populates and creates the arrayList data structure:
public class RODMFileParser
//used to keep file information
ClassEntity classEntity = null;
//used to store ClassEntity objects
List<ClassEntity> classEntityList = new ArrayList<ClassEntity>();
//used to store the conversion table RODM->ENGLISH/ENGLISH->RODM
ConversionTableParser convTableParser = new ConversionTableParser();
else if(line.contains("Field Value "))
//now we can create a new Entity Class object! tricky! huh
classEntityList.add(new ClassEntity(idClassName, idFieldName,
englishClassName, englishFieldName, fieldType));
Iterator listIter = classEntityList.iterator();
while(listIter.hasNext())
ClassEntity tempObj = (ClassEntity) listIter.next();
System.out.println(tempObj);
}So now classEntityList has all the objects I need to create these 2 seperate files but these 2 files are dramtically different. What would be the best way at exposing this classEntityList ArrayList so my 2 other classes can access it?
Thanks!well if I made it non-static, wouldn't I have to create a new object of that class in each class I want to use it in?
for example, that class that populates the database must parse a file to create the database.
RODMFileParser file = new RODMFileParser();
file.parseFile("QAGENT");So inside each class I would have to do this wouldn't I? if I made it public static, wouldn't I only have to read to the disk once?
Putting it to a worst case say, 100 classes need this database, that means I would have to make 100 accesses to the disk woulnd't it?
And if it was public static, it would jsut return a copy of the database that was only read from the disk once or am I misunderstanding how it works? -
What is the best way to do this? I am stuck!!
I have a block with this, PLEASE help! I am writing a plsql package that is going to create a custom table everything is going fine EXCEPT that I don’t know what will be the best way to do this. Please point me in the right direction a function or something:
I have three tables:
My custom table SZSLIFE
Two existing tables in my DATABASE:
SGBSTDN,
SLRRASG
For this pidm (primary key). I have the following records in the SLRRASG table:
SLRRASG_PIDM SLRRASG_BLDG_CODE SLRRASG_ROOM_NUMBER SLRRASG_TERM_CODE SLRRASG_RRCD_CODE SLRRASG_BEGIN_DATE
139203 ADD 103 200490 RCOM 09/02/2004
139203 ADD 103 200510 RCOM 01/24/2005
139203 BLA 001 200390 RCOM 09/03/2003
139203 BLA 001 200410 RCOM 01/25/2004
139203 HRK 101 200690 RCOM 08/31/2006
139203 RIV 11 200590 RCOM 09/01/2005
And I have the following records in the SGBSTDN table.
SGBSTDN_PIDM SGBSTDN_TERM_CODE_EFF SGBSTDN_STST_CODE SGBSTDN_LEVL_CODE SGBSTDN_STYP_CODE SGBSTDN_TERM_CODE_MATRIC
139203 200390 AS UG C 200390
139203 200410 AS UG C 200390
139203 200590 DW UG C 200390
139203 200610 IS UG C 200390
139203 200660 AS UG C 200390
139203 200690 AS UG E 200390
139203 200710 IS UG C 200390
So far I have been able to insert the following records in my custom table. This data is coming from the sgbstdn table
SZSLIFE_PIDM SZSLIFE_SLRRASG_TERM_CODE SZSLIFE_STUDENT_STATUS_CODE SZSLIFE_STUDENT_STATUS_DESC SZSLIFE_STUDENT_TYPE_CODE SZSLIFE_STUDENT_TYPE_DESC SZSLIFE_STUDENT_LEVEL_CODE SZSLIFE_STUDENT_LEVEL_DESC
139203 200390 AS Active C Continuing UG Undergraduate
139203 200410 AS Active C Continuing UG Undergraduate
139203 200590 DW Directed to Withdraw C Continuing UG Undergraduate
139203 200610 IS Inactive C Continuing UG Undergraduate
139203 200660 AS Active C Continuing UG Undergraduate
139203 200690 AS Active E Readmit/Re-entry UG Undergraduate
139203 200710 IS Inactive C Continuing UG Undergraduate
NOW the question is: I need to insert the rows from the term 200490 and 200510 because there is data in the slrrasg table for those terms BUT the data that I need to insert is coming from the SGBSTDN table and there is not data for those terms in sgbstdn, so my user is telling my that it is okay to insert the previous term from sgbstdn for example: for the term 200490 I need to insert trhe 200490 in the szslife_slrrasg_term_code but I also need to insert the row from the 200390(previous one) from SGBSTDN.
The same for 200510 insert 200510 in szslife_slrrasg_term_code but the rows from the term 200410 in SGBSTDN.
Please give some ideas of how to do this. I will highly appreciate.Thank you very much for your answer, I have to confess that I am confused, never code this way. It looks very cool, I will like to learn this technique.
This is what I have using my tables and my columns.
What is the idea here? create a table 4 on the fly with all the coulmns that I need? This is what I have but I don't thing is going to work.
2) do you need to have the same number of columns in the select like when you do a UNION?
WITH tab1 AS
(SELECT
sgbstdn_term_code_eff,
sgbstdn_term_code_eff,
sgbstdn_stst_code,
sgbstdn_styp_code,
sgbstdn_levl_code,
sgbstdn_resd_code
FROM sgbstdn
UNION ALL
SELECT
slrrasg_term_code,
slrrasg_bldg_code ,
slrrasg_room_number,
slrrasg_rrcd_code ,
slrrasg_begin_date ,
slrrasg_end_date,
slrrasg_ascd_code
FROM SLRRASG
UNION ALL
SELECT
szslife_slrrasg_term_code,
szslife_student_status_code,
szslife_student_type_code,
szslife_student_level_code,
szslife_student_level_desc,
szslife_residency_code,
szslife_building_code,
szslife_room_number,
szslife_assignment_begin_date,
szslife_assignment_end_date,
szslife_assignment_status
FROM szslife
UNION ALL
SELECT NEW_TABLE ---QUESTION what I need to select here all the columns from table 1,2,3?
tab2 AS
(SELECT
sgbstdn_term_code_eff,
sgbstdn_term_code_eff,
sgbstdn_stst_code,
sgbstdn_styp_code,
sgbstdn_levl_code,
sgbstdn_resd_code
FROM sgbstdn
UNION ALL
SELECT
szslife_slrrasg_term_code,
szslife_student_status_code,
szslife_student_type_code,
szslife_student_level_code,
szslife_student_level_desc,
szslife_residency_code,
szslife_building_code,
szslife_room_number,
szslife_assignment_begin_date,
szslife_assignment_end_date,
szslife_assignment_status
FROM szslife
UNION ALL
SELECT NVL(tab2.a,lag(tab1.a) over(ORDER BY tab1.a))
FROM tab1, tab2
WHERE tab1.a = tab2.a(+)
I will apprecite your help, I did look in my books for a similar example but not luck.
Rogelio -
Narrating Keynote (Voice over slides)? What is the best way to do this?
If I have a keynote presentation and I need it narrated (like a a voice over) what is the best way to do this?
Is it to record an audio file then insert it somehow into the presentation?
Sorry if this is a dumb question, just not sure how to make it work. I need my boss to do the voice over- so I will probably only get one shot.This forum thread offers some options to do this. One simple strategy is to record separate bits of narration for each slide, and simply attach that to each slide. When the presentation is run, the audio file will play for each slide. This approach is much easier than alternatives, but the downside is that it does not allow for narration across slides, which may or may not be important to you. If it is necessary, then you should check out the option (discussed in the thread) of pre-recording the entire narration, then using Soundflower and Keynote's Record Slideshow functionality to create a show with narration.
-
I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.
WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know
-
I want to stop using my old computer completely and transfer my itunes account to my new computer. What is the best way to do this?
A simple search
-
I need to move my library from my old computer to my new laptop (Windows 8). What's the best way to do this?
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2 -
I have just purchased an iphone 4 and it needs me to have the latest itunes on my computer. I have not upgraded by computer for some time and thought this is probably the time to do it. My computer is an imac intel with Tiger 10.4.11. I want to upgrade my Imac from tiger 10.4.11 to Mac OS 10.6 Snow Leopard or higher. What is the best way to do this? Appreciate any help as I am out of practice. I used to be an old hand at this, but things have moved on since I didn't upgrade or use my computer as much!
Catherina wrote:
... What is the best way to do this?
The best way, really the only way, is to purchase Snow Leopard.
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store.
Apple's price is $19.99, £14.00, €18.
Snow Leopard is not available to download from any legitimate source.
Once you install Snow Leopard, upgrade iTunes to version 10.7 or the latest, iTunes 11.
iTunes 10.6.3 is the last version of iTunes to support Mac computers with Mac OS X 10.5.8 with either Intel or PowerPC processors, but since you have an Intel iMac, the best solution is to purchase Snow Leopard. Leopard is no longer available from Apple and prices from aftermarket vendors can be unreasonably high. -
I just purchased a new desktop PC and want to move Itunes and all my Ipad Apps to new computer, and delete off my old computer. What is the best way to do this?
Hi,
See Here for Transferring your iTunes Library
http://support.apple.com/kb/HT4527
Make sure Everything is working to your satisfaction Before Deleting anything from your old computer...
Cheers,
Maybe you are looking for
-
Microfon problems s400 with noise reduction
Hello people, have a problem with the microfon sound. This recording is either noisy (without HD driver and with HD drivers without noise reduction) or it is distorted (with HD drivers and noise reduction). Drivers I've tried from the Lenovo page and
-
Where to keep the samples?
I have run out of room on my primary hard drive and want to move my samples to a second hard drive. What do I have to do to make Logic find the samples in the new location?
-
How to make moving/scrolling photo menu?
http://media.moma.org/subsites/2008/miro/flashsite/index.html How can I do this? when you move left and right and paintings move. and when you click on a painting, you see the the title and it links to another page on the site.
-
DownLoad Error (403)
Can't download... Download Error (403)
-
Aperture 2 keeps crashing on opening up
Hi Been using Aperture 2 fine until recently when upon opening, Aperture 2 quite unexpectedly. Would appreciate any help on this matter as to what the problem is. Thanking you in anticipation. Uzair Here are the problem details: Process: Aperture [52