ICal questions, maybe going into applescript question

Hello, I am trying to create a recurring ICAL event with different titles for a time period. It is simple, I want on monday of everyweek tor 7 monthes to read, week1, week2, week3 etc. Is this possibe in ICAL, or possible via applescript (beginner applescripter)?
Thanks!

All do-able in DVDSP... and pretty easy to do as well.
You can create the menus with links to the chapters in your track (which will play the chapter and then continue), you can set the chapters into stories and point the menu buttons to those instead and you can set each story to go back to the right menu.
You can then point a play all button at the track itself, which will then play all... which hopefully answers mish's question as well as yours.
Much of this is in the tutorials that come with DVDSP, and it is well worth your time going through those if you haven't already moved up to DVDSP. There is a lot of help available on this forum as well, mind you!

Similar Messages

I tried to update my phone and it ended up going into recovery mode. now my phone is locked bc i dont remember my old apple ID security questions, nor does the email exsist anymore. is there anyway i can unlock my phone myself or do i have to go to apple?

i tried to update my phone and it ended up going into recovery mode. now my phone is locked bc i dont remember my old apple ID security questions, nor does the email exsist anymore. is there anyway i can unlock my phone myself or do i have to go to apple???? ANYONE SUGGESTIONS PLEASE!!

http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

ICal can no longer Backup onto iDisk - goes into endless hang .

My family is in several locations (school - 2 homes). We have .Mac Family Account, where 5 users have the same 'Shared' folder in iDisk. Whenever we make changes to iCal, we always Backup onto the iDisk 'Shared' Folder... The next person dowlnoads the latest version...etc. Worked fine until Leopard.
Now, none of the Leopard Macs can Backup onto iDisk. iMac just goes into endless hangup once Backup starts . Backup to the iMac's Hard Drive works fine. Sync to iPhone works fine. Can also download FROM iDisk fine.
I have one older iMac still on Tiger. It transfers iCal data via Backup to iDisk like always. Right now, we using our iPhones to physically sync iCal to all the Leopards. Ugh.
Anyone have a possible solution? Any special settings / ports etc that might get iCal to Backup onto iDisk 'Shared' Folder?
Thanks for your help.

Phyllis,
For your problem, I would recomend what some other posting suggested.
Go to your System Preferences control panel in your Dock, choose your .Mac account. Remove your name and password. Quit/Close the System Preferences control panel. Re Open the System Preferences control panel and re enter your info. That should kickstart your connection. If that doesn't work try the same process but RESTART your computer in betweeen closing and opening the System Preferences control panel. Good luck.
Dario

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2.

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2. make it possible for them to download it via a link on our website 3. make it possible for them to save the info they have written into the form and mail it to the mail we have supplied in the entry form and 4. make it possible for them to put in a jpg. as part of the entry for and lastly 5. make it possible for us to copy paste the document and use it on other platforms. How do I do this - is it at all possible with adobe?

Those requirements are go way beyond what PDF forms can do and are meant for, some of them would require involving other programs or are mutually exclusive and contradictory. You are wasting your time even thinking about doing this as an "offline" PDF form. Simply sign up for an online forms/ survey service like FormsCentral or Surveymonkey.
Mylenium

I can't remember the answers to my secret questions when signing into itunes

I Cannot remember my answers to the secret questions when signing into iTunes to purchase. How do I fix this?

Hey Moo1972,
Thanks for the question. If you are having issues with the security questions associated with your Apple ID, follow these steps:
If you forgot the answers to your Apple ID security questions
http://support.apple.com/kb/HT6170
Reset your security questions
1. Go to My Apple ID (appleid.apple.com).
2. Select “Manage your Apple ID” and sign in.
3. Select “Password and Security” on the left side of the page.
4. If you have only one security question, you can change the question and answer now.
5. If you have more than one security question:
          - Select “Send reset security info email to [your rescue email address].” If you don't see this link or don't have access to your rescue address, contact Apple Support as described in the next section.
          - Your rescue address will receive a reset email from Apple. Follow its instructions to reset your security questions and set up new questions and answers. Didn't receive the email?
After resetting your security questions, consider turning on two-step verification. With two-step verification, you don't need security questions to secure your account or verify your identity.
If you can't reset your security questions
Contact Apple Support in either of these circumstances:
          - You don't see the link to send a reset email, which means you don't have a rescue address.
          - You see the link to send a reset email, but you don't have access to email at the rescue address.
A temporary support PIN isn't usually required, but Apple may ask you to generate a PIN if your identity needs to be verified.
Thanks,
Matt M.

How to paste or insert an image into a question?

Hi everyone, do any of you know how to insert a picture/ image into a question being posted on the discussion forum I came across a question at
http://discussions.apple.com/thread.jspa?messageID=6479101&#6479101
and realized that it can be done so I've printed part of the screen saved an image and would like to use it along with my question to help me explain the question in more detail.
Thanks Tumahawk

I discovered how to do it at this link for any of you wondering how to post images in these forums here's the link take care http://discussions.apple.com/thread.jspa?messageID=6477956&#6477956

This maybe a really dumb question...

I know this maybe a really dumb question but I do need to ask:
-Do I need to buy a new vista to install on my new mac?
(I have a start up one that was included with my previous pc laptop..)
-In terms of partitioning, how should I distribute space?
Thank you in advance.

jlee636:
The Boot Camp installation guide is [HERE|http://www.apple.com/support/bootcamp>. It should be able to answer questions related to installation. Of course these discussions have several other information on boot camp/ windows. All you need to do is launch a search on them.
-In terms of partitioning, how should I distribute space?
Too many people make a partition very small and then regret having done so. My recommendation is to have a partition of at least 32GB. It is highly dependent on what your will be installing on Windows XP/Vista.
-Do I need to buy a new vista to install on my new mac?(I have a start up one that was included with my previous pc laptop..)
It is more than likely that the Windows disk that came with your previous PC/Laptop is an OEM disk and will only work properly with that particular PC. This is generally the case with Dell, HP, Sony etc. The installation disk in the cases above are usually branded.
For more information on which Windows version(s) work with Boot Camp then please click [HERE|http://docs.info.apple.com/article.html?path=Mac/10.5/en/11889.html].
Axel F.

Thinking Home Home Automation Applescript Question

Hello,
I have a quick question on writing an applescript for Thinking Home 2.02. I'm just looking to do a few basic functions like turn off device "x" turn on device "y" etc. Any ideas? I looked in the dictionary for the application but I keep getting the error that it "can't get the device "b2" of controller "usb". Any ideas? Thanks again!
tell application "Thinking Home"
activate
tell controller "USB"
turn on device "B2"
end tell
end tell

Looking at the dictionary, it seems that you should be using something like:
turn on device address "B 2"
In other words you're missing the 'address' property. Without that it is assumes you're providing a name which is more likely to be something like "Living room lamp" or "Coffee machine".

My "Documents" icon in the dock has turned into a question mark.

On my MacBook Air my documents icon has disappeared and turned into a question mark. The icons have also disappeared within my Documents folder and some of the applications folders. Where did they go and how can I get them back?

Where they went is a good question, and not one we can answer without a lot more information. However, the Dock is pretty resilient at finding things like this if they are accidentally moved into another folder. So, unfortunately, I'd have to guess that it has been deleted. If that is the case, your question about getting them back can only be answered with another question: do you have backups?

MBP (13-inch, early 2011) goes into hibernation instead of safe sleep upon closing the lid (only when using battery power)

MBP details
13-inch MacBook Pro, early 2011 (model identifier: MacBookPro8,1)
Running Yosemite, OS X 10.10.1 (however, problem started while using Mavericks)
2.5 GHz Intel Core i5
4 GB memory
Symptoms
* the MBP goes into hibernation instead of sleep upon closing the lid on battery power (i.e., when AC adapter is NOT connected)
-- problem does not occur when AC adapter is connected
* putting the computer to sleep by other means does not induce the problem; these other means include:
-- [i] option+command+Power,
-- [ii] Apple Icon --> Sleep,
-- [iii] in Terminal: pmset sleepnow
* the battery is NOT getting drained at all; if I close the lid on 87%, the battery is still at about 87% when I get the MBP back up and running
To be as clear as possible:
(1) MBP is on and in use (power source: battery); battery is at X%
(2) the lid is then closed
(3) the battery indicator light glows bright for about 10 seconds, then shuts off, and with it so does the MBP (all fans and sounds cease)
(4) opening the lid and pressing any key on the keyboard does nothing (the computer is not sleeping)
(5) to turn the MBP back on, I must hit the power button once; this brings up and the gray screen and loading bar indicative of returning from hibernation
(6) log in; battery is still at X%
Attempted Solutions / Fixes
There are Apple Discussions addressing similar MBP issues, many of which at least have work-arounds, if not full-blown solutions. However, I have tried many of the proposed work-arounds and solutions; nothing has solved my problem. Such attempted solutions include:
* made sure EFI/SMC firmware was up to date
* updated all software
* logged in as a different user
* booted in Safe Mode
* reset the PRAM
* repaired disk permissions using Disk Utility
* repaired additional disk permissions in recovery mode (a la this chron.com advice)
* ran the Apple Hardware Test multiple times (short test while plugged in, short test on battery, extended test while plugged in, extended test on battery)
* booted from an external known-good OS on USB drive
* reseated the RAM
* used MemTest to test the RAM's health (it was good)
* tested my battery's health with the app Battery Health (it is healthy!)
* booted my computer with one stick of the MBP's original RAM at a time (figured "why not?")
* booted my computer using other sticks of RAM
* checked my power management settings using PMSET in the terminal (e.g., pmset -g); tried various hibernation modes (e.g., sudo pmset -a hibernationmode X, where X=0,1,3, etc)
* searched/grepped through my power management logs and Console messages to look for googleable items (e.g., pmset -g log | grep WORD, where WORD=failure, sleep, etc); still have not found help online
* brought the MBP to a Mac Genius
-- he ran some further tests, but found nothing;
-- he re-installed my OS as a hopeful-hail-mary-just-maybe-last-ditch effort; the problem persisted!
-- we both agreed that we had ruled out a software cause
-- he offered me to leave my MBP to get fixed for a flat fee of $300.00 (which after a couple weeks of trying to figure this out is starting to sound more and more reasonable)
Given that it is likely not a software issue, what hardware might it be? By booting from an OS on an external drive, I think I've ruled out a bad hard drive or hard drive cable. Also, given that inducing sleep in any way other than closing the MBP's lid does not cause the problem, it seems there might be a wire (or something) in the hinge section of the MBP that gets moved when the lid is closed possibly causing some kind of short circuit...or something.
If someone with more experience interpreting Console messages, for example, can help, I'd be happy to provide some logs, or any additional information.
Thank you for your time and consideration.

Ok, this is a crazy-simple, quasi-embarrassing fix, but I'll post it anyway just in case anyone is having a similar problem (for example, this guy: Changes to pmset being ignored).
Some time around late last August / early September (2014) this issue began happening for me (specifically, issue = closing lid while on battery power induces hibernation / shut down instead of sleep --- independent of hibernation mode). Maybe it was when I upgraded to Yosemite (not sure what the exact date of that was). As detailed in my original post, I frantically tried everything I could think of... At that time, however, I had quite a few presentations and posters to create and present at meetings and conferences, so I held off fixing it for a couple of months and returned to it this past week, where I tried a few more things listed above, but again to no avail...
This morning, I simply tried fudging around with all my power management settings again (via pmset in Terminal). The simplicity of the fix surprised me. But now that I understand it, I know it is likely the same fix for other threads I've read, such as the one above:
(TLDR in bold)
(1) Take note of your power management settings (Terminal: pmset -g custom)
(2) Is the "standby" flag set to 0? If so, set it to 1. Wa-la! Done.
This fix is crazy and embarrassing b/c I was so close to it for so long. I tried changing my hibernation modes multiple times (sudo pmset -a hibernatemode X, where X=0,1,3,25,etc). I read about manipulating other PMSET settings that helped other people with newer MBPs, like "autopoweroff" and "autopoweroffdelay" --- settings that I do not have on the MBP early 2011 (check your settings: pmset -g cap). And most amazingly of all, I even messed with the "standbydelay" setting, trying to make it so long that my computer should never go into hibernation... Yet, from what I can tell by looking over my notes, I never simply set "standby" from 0 to 1.
There are interesting questions that arise due to this fix. For example, why did this problem persist on clean installs of OS Yosemite? Is "standby" being set to 0 the Yosemite default? I'm not sure. If it is, then Kappy was right: this was normal behavior... It just wasn't always the normal behavior...at least not for my MBP. Normal behavior (hibernatemode 3) used to be (and now is again) that the MBP goes into safe sleep, and then only after an allotted amount of time will it go into full-blown hibernation.
NOTE: the "standby" and "standbydelay" PMSET settings are not available in some earlier MBP models (e.g., my brother has a 2010 and does not have these settings); so if you're having a similar problem with an earlier model, this fix might not be of any help to you.

HP Envy shutting down after going into sleep mode

Hi. I'm not sure where to post this so I'll try it here.
My laptop shut downs automatically when it goes into sleep mode. Not right away when going into sleep mode. Maybe like an hour later after going into sleep mode.
I'm not sure it's overheating because it never shuts down while I'm actually using the laptop.
Do you guy have any idea how to fix this?
Product name and number: HP ENVY TouchSmart Sleekbook 4-1115dx
Operating System: Window 8
Error Message: None
Any changes to your system before problem occurred: No

Hey Tecmo_SB_Guy,
I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate.
1. Windows key + Q to open the Search Bar
2. Type "power"
3. Click Settings under the Search Bar
4. Select Power Options from the results on the left.
5. In Power Options, Click Change when the computer sleeps, on the left.
6. Set the Put the computer to sleep setting so that it fits your usage best.
7. Click Change advanced power settings, at the bottom.
8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
9. Click Apply to save changes.
If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
I hope these suggestions help! Please let me know if you have any questions
Attachments:
PowerHibernateNever.jpg ‏59 KB

HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

IPod touch 1st gen goes into recovery mode after shut down or lock

Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

Welcome to Apple Discussions
Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
http://support.apple.com/kb/HT1808
As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

ICal questions, maybe going into applescript question

Similar Messages

Maybe you are looking for