[IDCS2] How can I know a font whether is existing or not

Now,I met a problem as follows:
1.When we open a document which contains missing font,the dialog comes.
2.When I apply a Japanese font on Japanese charactor [あ],it has no problems,but when I change it as Arial font,it becomes missing font.
In these two cases,the reasons why the font is missing are different,
So I want to know how to judge them (The font is really not existing and the font face is not existing in the current font)?
Before I judge it by CID==0,but it seems wrong on Mac;
And I think the judgement is different on Mac and Win,
who knows it,tell me please
Thank you in advanced!

Aren't these two unrelated problems? They do get marked with the same color (ghastly pink), but in case #1 you don't have the font at all, and in case #2 you have a missing character in an existing font and what you see is the font's default character. A missing character has nothing to do with "font face".

Similar Messages

HT4061 How can I know that my iPad is original or not?

How can I know that my iPad is original or not? If I can know, how?

Do you think it's a fake iPad?
Were you able to register it with no problems?
https://supportprofile.apple.com/MySupportProfile.do
Where did you buy it? Can you compare it with iPads at an Apple store or reseller?

How can i know default font

hi all,
i want to know default font in linux using java code.
thanks in advance
daya

Use the getFont() method for the component in question.

How can i check my iPhone whether being international or not ?

I have an iPhone4, but i don't know whether this device is international "unlocked for all networks" or it works only with a specific network.
could you help me pls how to identify my device.

A model number is not going to tell you if a phone is locked or not. In many countries the phone is provided locked by the service provider but can be requested to be unlocked. There is nothing to show on the phone that it is now unlocked. The only way to tell is to place a SIM from another carrier into the phone. Even this does not tell you if it was unlocked by a carrier or has be unlocked via non-authorised means.

How can we know that the Rule is Generated or Not?

Hi,,
After creating the Risk , its suggested to click on Generate Rules Button to Generate the Risk.
But my question is that how we can know whether the risk is already generated or not..??
Any table or any change history for this.
As I can see even after generating the Rule the last update date for the risk is still the same.
Someone please help me !

Hi,
Rule ID numbers are just identifiers for different combinations in same risk. It is just serial number assigned to the combination.
Example:
Risk: RISK01
Function: FUNC01                         Function: FUNC02
Action:      ZU01                              Action:     XU01
                 ZU02                                              XU02
Rule ID: 0001 for ZU01 and XU01
Rule ID: 0002 for ZU01 and XU02
Rule ID: 0003 for ZU02 and XU01
Rule ID: 0004 for ZU02 and XU02
But if you remove action ZU02 and XU01 in your update
Remaining
Action:
ZU01
Action:
XU02
Rule ID: 0001 for ZU01 and XU02
So it will just update the respective risk with same rule id assignment to new combination.
To achieve more clarity try to build one risk in you system.
You can definitely go into the risk to see if the new rule generated has changes reflected as per update or not. Try this all with example so you would have clarity.
BR,
Mangesh

How can i know if the GPS is active or not ?

Hi all ,, I would like to know more about the GPS in my New Iphone 3G . how do i activate the GPS or decativate it ? also i have a little question which is i cant download any free apps from itunes store ..i choosed to none pay this ditnt continue the steps and if i entered my visa number it keeps telling me wrong number

iphone GPS blue indicator. I find it interesting - and would be interested if anyone has any input on this - on the UK site the GPS info for iphone says this -
Get the signal.
"In addition to A-GPS, iPhone features location technology unlike anything available on a mobile phone today. iPhone uses signals from GPS satellites, Wi-Fi hot spots and mobile towers to get the most accurate location fast. So if you’re inside — without a clear line of sight to a GPS satellite — iPhone finds you via Wi-Fi. And if you’re not in range of a Wi-Fi hot spot, iPhone finds you using mobile phone towers. On the iPhone display, the size of the circle around a location pin tells you how accurately iPhone is able to calculate a location: The smaller the circle, the more accurate the location."
On the US site it says this ------ Where has the blue GPS indicator got to?!! Compare the second lines in each paragraph. I can't see what they mean - can you?
Get the signal.
In addition to A-GPS, iPhone 3G uses signals from GPS satellites, Wi-Fi hot spots, and cellular towers to get the most accurate location fast. If GPS is available, iPhone displays a blue GPS indicator. But if you’re inside — without a clear line of sight to a GPS satellite — iPhone finds you via Wi-Fi. If you’re not in range of a Wi-Fi hot spot, iPhone finds you using cellular towers. And the size of a location circle tells you how accurately iPhone is able to calculate that location: The smaller the circle, the more accurate the location.

How can we know if an entity is active or not in a given period in HFM??

In in the ownship management, we can see the child entity is inactive, but we don't know when it was inactivced, is there any table we can find to see if an entity is active or not??

Hi,
The best way that comes to mind is to make a grid where you have the entity and value dimensions on the rows and years and periods on the columns.
For entities you select the parent and the child you want to look at, value dimension members <Entity Currency> and [Proportion]. For years you select those which you want to look at and all the periods.
On the grid the [Proportion] should turn from green to red on one of the year/periods and that's the moment your entity became inactive to that parent.
Hope this helps.

How can i know in PO change is happen or not

Hi All ,
i have one requirement in existing Purchase order user is mad some change like he change the QTY value 10 to 20. so i want to know which field change are happened. and is there any routine is updated flag like X .
Please Help me .
Thanks,
Venkat.

Detail of changes are in CDPOS, CDHDR is only header, you could (should) use FM of groups SCD1, SCD2 and SCD6 to extract change details. (Ref Change Documents, Procedure, … , Read and Edit Change Documents
Regards,
Raymond

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

HT201328 how can I know whether my IME is blocked or not?

How can I know whether my IME is blocked or not?

Ask your wireless carrier.
Where did you acquire this iPhone? Common scam
is to sell iPhone in working condition so buyer can see
it works, then seller reports iPhone as stolen/lost for
insurance claim. Insurance company works with
cellular provider to blacklist the iPhone and suddenly
it no longer works.
Or is your iPhone still locked to a wireless carrier as
you imply in https://discussions.apple.com/thread/5001327?tstart=0

How can I know whether PI is ready to run

Hi.
How can I know whether PI is ready to run?
ex)
MMC status is green.
J2EE Engine status is "10"(RUNNING)
http://<host>:<port>/AFW/rtc returns some status
I want to check the whether PI is ready to run periodcically.
Can I use sapcontorl interface?
regards,

Gaspard,
>MMC status is green.
>J2EE Engine status is "10"(RUNNING)
> Check the ABAP Stack
If all this good, PI is ready to go ahead
Cheers
Agasthuri Doss

How can we know in classic scenario, whether confirmation has been done in

Hi ,
In Self service procurement with classic scenario:
I believe that we can do confirmation in EBP or in R/3.
How can we know in classic scenario after confirmation, whether confirmation has been done in EBP or in R/3.
Also please give an idea is there any configuration difference for confirmation need to do in EBP.
thanks
RESHMA

Hello Reshma,
>
Reshmab wrote:
> How can we know in classic scenario after confirmation, whether confirmation has been done in EBP or in R/3.
> (...)
Using Web GUI (ITS or Portal), if you look at the SC history (or PO history) in table mode, if column where you find SC number as no value for confirmation (confirmation with SRM number range), this means PO was confirmed directly in R/3 with a Goods Receipt.
Using SAP GUI, if confirmation was done in SRM purchasing document exists in CRMD_ORDERADM_H for PROCESS_TYPE = 'CONF',
>
Reshmab wrote:
> Also please give an idea is there any configuration difference for confirmation need to do in EBP.
> (...)
There is no specific customizing to allow SRM confirmation: just give correct role to users in order access to confirmation transactions (authorization object BBP_PD_CNF ). Check with roles EMPLOYEE* or PURCHASER*.
Regards.
Laurent.

In Generic Extraction how can we know whether it is Delta Enabled or not?

In Generic Extraction how can we know whether it is Delta Enabled or not?
Thanks,
Pramod.

Hi Pramod,
In R/3 use RSO2 tcode and enter your DS name and click "Change / Display" In this "Press F7 or Display Filed List" icon near to Generic Delta.In this Screen if Delta Update is Checked means it supports delta method otherwise it won't support delta method.
Note:Assign Points if it helps.
-Arun.M.D

How can I know the name(s) of font from built-in font dialog from Word VSTO AddIns.

Hi, All !!
I would like to extract some values from the built-in font dialogbox "wdDialogFormatFont" through VSTO AddIns.
Figured out short codes;
Microsoft.Office.Interop.Word.Dialog
F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show( F_DLG.FontMajor.ToString() );
MessageBox.Show( F_DLG.FontHighAnsi.ToString() );
Ther last two lines (red ones) do not work at all.
How can I know the name of the fonts ? (English and Non-English)
In VBA, it works beautifully.
Thanks !!

Hi,
According to the description, you want to get some options from the build-in dialog dispaly by code.
As far as I know, we can declare an dynamic object to achieve the goal. Here is the code for your reference:
dynamic F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show(F_DLG.FontMajor);
Also we can use refrection to get the property we wanted like below:
Microsoft.Office.Interop.Word.Dialog F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
F_DLG.Show();
MessageBox.Show(F_DLG.GetType().InvokeMember("FontMajor", BindingFlags.GetProperty, null, F_DLG, null).ToString());
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

[IDCS2] How can I know a font whether is existing or not

Similar Messages

Maybe you are looking for