Ideapad S2109 ROM equivalent located and flashed! I brought this back to life!!

UPDATE!!!!!!!!!!!!!!
Great news everyone! After almost a year of tinkering with this tablet, I have successfully brought the tablet back to life!! I am working to get the Medion Lifetab S9512 firmware files hosted as the Medion Lifetab S9512 is just a rebranded S2109. If this link is still alive, grab it here and repost: https://hotfile.com/dl/204123941/3bb0e2c/Medion_Lifetab_S9512.rar.html
Anyhoo, the process is quite simple. You need to have ADB and Fastboot working. There are so many great tutorials on XDA-Forums on how to get Android SDK, ADB, and Fastboot installed and running so I won't bother posting a how to here.
First thing to do is extract the contents of the downloaded Medion Lifetab S9512 ZIP file to your SDK platform-tools directory. Next, open a command propmt from your <sdk platform-tools directory>. Quick way to do this is to navigate to the platform-tools folder, hold shift while right-click and select "Open Command Window Here".
Next you want to start the S2109 in fastboot mode. Hold the power button + the volume down. When the tablet vibrates once, release the power button while still holding the volume down button. You should see red text on the screen that indicates that you are in fastboot mode.
From the command prompt you opened, type “start fastboot”. Next, connect your tablet to your computer via USB. Your tablet may not be connected so you may need to go to Control Panel\Device Manager in Windows to select the correct driver. I used the ASUS Transformer Fastboot driver and it worked like a charm.
Once the device is connected and the computer recognizes it, you will want to type these commands, ensuring that you <filename>.img file points to where you extracted the Medion Lifetab S9512 ZIP file:
fastboot -i 0x17ef flash system <your directory>\system.img
fastboot -i 0x17ef flash boot <your directory>\boot.img
fastboot -i 0x17ef flash recovery <your directory>\recovery.img
fastboot -i 0x17ef flash bootloader <your directory>\bootloader.img
fastboot -i 0x17ef erase cache
fastboot -i 0x17ef erase userdata
fastboot reboot
The “fastboot reboot” command may not work for you, but don’t sweat it. Just power off the tablet and disconnect it from your computer.
Power on your tablet normally and let it do its thing. After a few minutes you will hear that annoying boot sound and see the boot animation. It may reboot once or twice during this process but just hang tight. It took about 5 minutes for mine to fully boot.
Goodluck, and sorry for the all the typos. I’m just really excited that I got this to work!
Moderator Note; implied profanity edited; please keep it clean

Link Down =(
please make a new link =(

Similar Messages

I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

Strange noise and flashing lights -- can this be battery/power-related?

I have had two occurrences of a very strange sound and never-before-seen flashing of a light on my TiBook. Here is what happened:
I recently got a new battery (a NewerTech Extend 4800) for my 3 year-old PowerBook. I carefully followed the directions that came with the battery and installed it, then plugged in the power adapter to charge it up. I then started the computer so I could see the battery’s progress. Upon start-up, a “whooo” sort of sound came out of the computer for a few moments and the little sleep indicator light flashed several times (as did the apple light on the back of the computer lid). Nothing appeared to be out of order and the computer started normally otherwise. I was able to monitor the battery’s progress and since everything seemed to work normally and no one I talked to seemed to think I’d damaged anything, I just used the computer normally for the next two weeks with no problems.
Then last night the computer just shut down all by itself – I did not put it to sleep and it is not set to go to sleep on its own (my power saving setting is only set to dim the screen), nor did I click “shut down.” I thought perhaps somehow the power cord had not been attached and the battery had run down, although the new battery has been warning me properly when the battery is getting low, so that doesn’t make sense. It would not wake, so I restarted it. Upon restart, the same noise and flashing light situation occurred again.
I called the company that sold me the battery and the tech guy’s suggestion there was to reset the PMU and he gave me an Apple article to instruct me on how to do that. I have done that, but there is no evidence that that has solved whatever the issue was. I am hoping that someone can identify the sound and lights pattern and advise me as to whether it is some more serious issue, or if it’s nothing to worry about. It has been suggested to me that it is possibly a power adaptor issue, but since I’ve run down and recharged the battery without incident several times in between the two occurrences, that doesn’t seem logical either. Is there a known signal a computer makes when there is some power/charging issue?
Thanks for any help you have or for at least posting if you have had a similar experience. So far, no one I’ve talked to has ever heard of this before.
15" Powerbook G4 (tiBook), 1 Ghz, 1 GB, Super Drive Mac OS X (10.4.3)

Hi ChloeB,
Your description of the "moaning" sounds at startup sounds like something I'm dealing with. I came across the following post by EWW in the "My Powerbook Won't Start Up". I recommend the link and wish to specifically credit EWW with the posting, as I found it helpful. The URL is
http://discussions.apple.com/thread.jspa?threadID=380101&tstart=0
Begin Pasted Posting
Hi, limberlingo, and welcome to Apple Discussions.
Power On Self-Test Beep Definition - Part 2 (Oct. 1999 and later Macs)
http://docs.info.apple.com/article.html?artnum=58442
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your Powerbook is not detecting any good RAM at startup. This may indicate that your RAM (all of it — do you have one module or two installed?) has gone bad, or that it isn't seated properly. The first thing to try is reseating it: remove the module(s) and then reinsert it(them). Then try starting up again. If that doesn't do the trick, and you have only one RAM module, it's probably bad and will have to be replaced. A single RAM module having intermittent problems before failing completely (as it apparently has now) would account for all your problems.
If you have two modules, it's much less likely that both of them have failed or loosened in their slots simultaneously. Post back with results of your testing.
End of Pasted Post by EWW
There's another thread I found where one of the causes of a three-tone warning was found to be a pinched ribbon cable coming off the bottom of the trackpad. You can find that in the thread titled "Solution to Freezes Caused By Ribbon Cable" - - the information provided by Marc Posner, Anthony Brade and others.
The URL is
http://discussions.apple.com/thread.jspa?threadID=228678
Hope this helps.
Paratus

The lastest version of Flash on my pc has a typo in the properties, see as follows: "Adober Flashr Player Update Service 13.0 r0". Notice the "r" at the end of both Adobe and Flash. Is this malware of just a poorly completed application?

Is this malware, OR just a poorly completed application?
It updates to a version that is not the absolute latest on the Adobe website downloads page which is what first got my attention. Yesterday I had to delete the updater executable to get Flash to update to the latest. Yet today here goes the updater again with the properties: "Adober Flashr Player Update Service 13.0 r0".

Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

No sound in flash-related videos since I updated my browser and flash.

I updated my browser and flash. Before this I had no problems whatsoever with sound in flash videos. I was watching them just fine and then I installed the updates, and all of a sudden flash vids play fine, but have no volume. I tried adjusting the mixer volume on my system tray and nothing. I don't want to go uninstalling and reinstalling and losing years of settings because somebody couldn't code flash properly.
HELP!!!!!!!
== This happened ==
Not sure how often
== Today when I updated Firefox to version 3.6.4 and got the flash update of version 10.1.53.64

Hello C.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
If you are having a problem specifically with Adobe Flash Player, you need to contact Adobe.

"Can't locate macromedia flash" error

I keep getting the error message "cant' locate
macromedia flash" and can't seem to get rid of it. I have tried
downloading the uninstall software twice, but to no avail. I also
can't locate the flashplayer on my computer. I have windows
XP

F18Goose wrote:
> When I updated my DW8 to the lastest update I found that
I can not enable or
> installed any extensions. I have also downloaded new
extensions and tried
> installing them using the Update Manager v1.7. However,
after going through
> the process to install an extension I get the error "
Can't update menus.
> Extension will not be installed.." Please advise
how I can fix this
> problem so that I can use extensions with DW8 again.
Thank you.
This is a bug in Extension Manager where from time to time
one of the XML files that Dreamweaver uses gets corrupted in some
fashion and Extension manager can't edit it any longer. I've found
that it's Menus.xml in the User folder that tends to be the issue.
For DW8, the file should be located here:
C:\Documents and Settings\[UserName]\Application
Data\Macromedia\Dreamweaver 8\Configuration\Menus\menus.xml
Mac:
HD:Users:username:Library: Application
Support:Macromedia:Dreamweaver MX
2004:Configuration:Menus:Menus.xml
So, how to to fix this issue. Sometimes you can uninstall all
of your extensions and reinstall them one at a time.
If that doesn't work, then you may be able to get away with
deleting the Menus.xml file (make sure it is only the one within
the username folder and not within the program install folder).
Note: this action will cause any extension that added menu items to
have those menu items removed. disabling and reenablign the
extensions shoudl bring them back.
Failing that, removing the user configuration folder (or even
renaming it) may help. Note: This will cause all extensions to be
removed from within Dreamweaver, so you'll have to reinstall.
If none of that works, then you may have to resort to
uninstalling DW, removing the user configuration folders, and then
reinstalling DW.
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Multi-module Maven and Flash Builder 4

Sorry for cross-posting this, but I responded to:
http://forums.adobe.com/message/3235768#3235768
which was posted in the Flex forum, and this is more about Flash Builder. The issue is that content assist doesn't work with a multi-module maven project containing a Flex Project module. So here is my response to the above. Hopefully someone will see it here:
<quote>
I'm having the EXACT same problem reported by you as well as here:
http://forums.adobe.com/message/2580402#2580402
Steps to reproduce:
1) Install Adobe Flash Builder 4 Standalone (I initially tried with Spring Toolsuite 2.5.0, but thought I should try with the standalone version from Adobe).
2) Open FB4 and create a brand new workspace
2) Add Eclipse Galileo and M2Eclipse as update sites
3) Install m2eclipse
4) From the command line, create a basic maven project via 'mvn archetype:create'.
5) Remove the src folder and change packaging type to pom
6) In FB4, import the new maven project
7) Create a new Flex Project via File -> New -> Flex Project. Change the location so that it's in a folder under your newly created maven project
8) Open Main.mxml -- notice that the generated file has syntax errors in it (another issue). Fix those errors and attempt the Content Assist -- no dice
Notice that this is a vanilla FB4 standalone install. The only thing I added was the M2Eclipse plugin. Also, I am NOT using flexmojos, nor have I added a <modules/> section to the parent pom yet. As far as FB is concerned, the new flex project is just in a folder underneath another in it's workspace. Also note that this is a brand new workspace -- so a corrupted workspace shouldn't be an issue (as was apparent in the beta).
This has been driving me nuts. We need this functionality. We have a multimodule maven project and really want to use Flex and Flash Builder. We're still in the eval period for FB, but may have to forgo buying FB and instead go with FlashDevelop, even though it's not as powerful.
Justin
</quote>

Hi guy,
its actually quite simple.
The "Root Folder" "Root URL" "Context Root" define your server directory and its url.
as the root folder you put in
<your blazeds install dir>/tomcat/webapps/<your project dir> // you take the blazeds.war file and copy it , rename it and voila your app dir is ready
so it should read something like : c:\blazeds\tomcat\webapps\my_project --> this then has a WEB-INF/flex directory in it. Thats why you have that error of yours --> Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
the root url is something like
http://localhost:8400/<your context root> --> is usually your project name in lower case
the context root is your project name, the same name as your copied blazeds.war file
<my_project_name> --> thats what you insert to access your app in a webbrowser
Hope that helped a bit
I am just getting started myself, so i hope i didnt make any mistake, if so I would also be happy if anybody you knows better corrects me
Have fun and good luck
einrocker

How to identify DRAM and Flash memory of a individual member from a switch stack

I want to check DRAM and Flash of each member in a stack . How can I verify the same .
Thanks

HI Tushar,
To determine the amount of Flash and DRAM, issue the show version command. Refer to the bold text in the output below. DRAM is divided logically, combining the two numbers to determine total DRAM. In this case, it is 45056K/4096K bytes (45056kB + 4096kB = 49152kB), which is equal to 48MB.
router>show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS56I-M), Version 12.1(5)T9, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sun 24-Jun-01 15:29 by cmong
Image text-base: 0x80008088, data-base: 0x8149F218
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
R1 uptime is 9 weeks, 3 days, 2 hours, 32 minutes
System returned to ROM by power-on
System image file is "flash:c2600-js56i-mz.121-5.T9.bin"
cisco 2651 (MPC860P) processor (revision 0x200) with 45056K/4096K bytes of memory.
Processor board ID JAB04390J7N (1507969529)
M860P processor: part number 5, mask 1
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
2)
To check on all the switches of Stack two way:
1- session 4 >> to login to the 4th switch of the stack.
2- remote command all show ver >> this will give us show version output of all switches.
HTH
Regards
Inayath
*Plz rate if this info is usefull.
remote

Disk array configurations with oracle redo logs and flash recovery area.

Dear Oracle users,
We are planning to buy the new server for oracle database 10g standard edition. We put oracle database file, redo logs, and flash recovery area on each of disk array. My question is what is the best disk array configuration for redo logs and flash recovery area? RAID 10 or RAID 1? Is that possible we can duplicate Flash recovery area to the other location (such as net work drive) at the same time? Since we only have single disk array controller to connect to the disk arrays, I am try to avoid the single failure that will lose archive logs and daily backup.
thanks,
Belinda

Thank you so much for the suggestion. Could you please let me know the answer for my question of FRA redundancy?
“Is that possible we can duplicate Flash recovery area to the other location (such as net work drive) at the same time? Since we only have single disk array controller to connect to the disk arrays, I am try to avoid the single failure that will lose archive logs and daily backup.”

Can you add the entire content of your desktop to the allowable locations in flash player?

can you add the entire content of desktop to the allowable locations in flash player? when i click 'add' to allowable locations and type in file:///C:/Documents and Settings under website (i know it's not the website but where else would it be added) it doesn't show up in the overall list of allowable 'sites'.

Hi radwh,
Are you talking about trying to add your desktop to Flash Player's trusted locations? If so, you use the "Advanced" tab on the Local Settings Manager to designate folders and files as trusted. (Full path is Advanced->Developer Tools->Trusted Location Settings.) Here's a link to the documentation for that: http://help.adobe.com/en_US/FlashPlayer/LSM/WS6aa5ec234ff3f285139dc56112e3786b68c-7ff0.htm l .
Hope this helps, and get back to me with further details if this is not what you were asking.
Thanks,
KALTechWriter

Java and Flash not working ONLY in Safari

Ok, so Java and flash stopped working in Safari on my 10.6.8 system. It seems a recent update caused a problem and all of the normal items I have gone through have made it worse or not helped.
Java is not working in Safari (My account or guest account)
     http://javatester.org/version.html    Error "attempted to load Java content, but Java is unavailable or not installed."
     http://www.java.com/en/download/testjava.jsp " attempted to load Java content, but Java is unavailable or not installed."
     http://www.adobe.com/shockwave/welcome/ Error "Missing plugin"
     Flash tests just say missing plugin
Java DOES work in Chrome and Firefox
     http://www.java.com/en/download/testjava.jsp
          Java SE 6 Update 31
          Flash - 11,2,202,235 installed
Able to use apps and other items online that are not working in Safari.
Have downloaded and installed the following and done the following
     Ran software update
     Verified Java and Java Script are enabled via Safari > Preferences > Security
     Re-installed Java for Mac OS X 10.6 Update 8
     Reinstalled current version of flash
     Looked around and deleted all plist, and java folders in library locations (user and main system)
     Cleared out metadata folders
     Reset Safari several times
     Java Preferences
          Cleared all cache
          Made sure no old versions there (2 entereis)
          Reset all defaults
          Removed any blocked items
Current Java version per terminal
java -version
java version "1.6.0_31"
Java(TM) SE Runtime Environment (build 1.6.0_31-b04-415-10M3646)
Java HotSpot(TM) 64-Bit Server VM (build 20.6-b01-415, mixed mode)
So - Java is up and working - works in Chrome and Firefox. Have reinstalled both from current versions. Reset all browser cache. Issue follows Safari. Normally installing these and trying again works. I do not know what other things to reset or clear out.

baltwo wrote:
I thought the OP already went through the preferences app.
Yes, I got distracted for a moment with something, came back and I didn't finish reading the OP's original post, I have since edited mine.
BTW, the Mozilla plug-in checker is basically useless for Safari users, since have of those I have have no status, but work in Safari:
I don't know the causes for the "Research" one's, why there isn't a link or why it doesn't update the checker,
But at least it's infomative, as vulnerable plug-ins are responsible for MacDefender and Flashback malware attacks.
Someone with a lot of plug-ins should be running Firefox and NoScript, as your very exposed to multiple attack vectors from any of those plug-ins, which is the purpose of the web site, to get the word out about outdated plug-ins with potential security issues.

Scriptable mail client with good support for html and flash

Hi,
on one hand I'm looking for the uzbl/luakit/.. equivalent in the mail client world: I want a very high level of control over how mails are fetched, filtered, displayed, scripts, keybinds, etc etc.
On the other hand I also want the client to handle html mails properly, even when they include html5 sound/video clips and/or flash widgets/videos.
This might sound ironic, but I use rss2email to get all my newsfeeds delivered to my mailbox. I think this makes a lot of sense, a centralized repository for all the messages I want to get.
But those newsposts often contain html5 and flash widgets, which I want to be able to use from inside the mailclient.
Also I expect usage of the xdg basedir spec and sane use of files (a simple text config file, and maximum a few binary files for caches/indexes etc)
A good search system based on sup/notmuch/xapian would also be welcome.
I just can't find a mail client like this. Any suggestions? Maybe anything that's close, so I could hack it a bit myself?
Claws-mail is the least sucky client I could find, but still it doesn't give me the advanced scriptability, it makes a mess in my homedir and doesn't support html5/flash.

Thid may take you a bit away from your current setup, but if you have used sup you shouldn't be too scared ;D
Ive started using mutt a while back, and if properly configured it can do a _lot_ of things and very well at that too!
Anyway, to answer your post:
1) Mutt can be configured to retieve your rss feeds, so you dont need to use rss2email and still get a centralilsed repo for your email and rss and, you will be able to keep your email account uncluttered with rss mail (but thats personal preference).
2) Intrinsically, like all CLI mail clients, butt doesnt show html/html5 or embedded flash in email. /BUT/ you can configure it to use a differen program to handle this automatically.
So, you will be able to get say uzbl, or jumanji or surf (if you're into your lightweight browsers) to open those multimedia emails. Edit: it seems you will probably have to use links2, but you may be able to use other clients (they will have to open as a seperate application though, whilst links2 is able to stay embedded. Maybe this can be done with the other browsers but I haven't tried nor researched this.
Generally as: (in .muttrc)
# enriched messages
auto_view text/html # view html automatically
alternative_order text/plain text/enriched text/html # but save it for last
Credit for that snippet goes to something i found on dotfiles. If I ever find the author's name, I shall edit it in here.
You will also need to create a .mailcap file with the relevant data. A basic google search reveals some good tutorials for this.
Last edited by GalacticArachnid (2010-12-03 02:01:42)

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

Adobe Reader Updates and Flash Plugin for Reader.

I was surprised to find out that Adobe Reader Updates and also Flash Plugin for Adobe Reader cannot be installed on Windows 7 without Admin Rights!!!!!
I remember on Windows XP this was not an issue. I am sure I have checked the possibility of installing Adobe Flash Plugin for Adobe Reader on Windows XP without Admin Rights and it worked...
Now, we have some major issue...
I have prepared Adobe PDF Portfolio for some new policy for Housing Loan, and deployed it to be open from a Web Browser. As per my testing, it worked very nice, and the Business User loved it. On Windows XP, if flash plugin for Reader is not installed, the user will be guided to install it, and it works very nicely.
Just before sending the announcement to all users, we realized that on Windows 7, if flash plugin for Reader is not installed, then when the user clicks on the link to open the PDF Portfolio, then nothing happens. The browser window will open, and it will hang.
Then we found out that on Windows 7 we have to install the Reader Flash Plugin manually, and also, the user must have Admin Rights ...
Now, a decision has been made to cancel the work done using PDF Portfolio, and develop a simple page with links to the required documents...
Any solution for this?
How we can install the required plugin without the need for Admin Right?
Why on Windows 7, the user does not get prompts to guide him to install Adobe Reader Flash Plugin?
Tarek.

I think I can see the reason for this. The Flash Player is separated from Adobe Reader; the system component is now used. (It appears that the "browser plug-in" and "Flash plug-in for Adobe Reader" are indeed the same thing, loaded from the same system location).
Adobe are following recommended practice. It is right and proper that software is installed by the administrator. This then means that the non-administrator end user is protected from malware which attempts to change that software for bad reasons.
Nobody wants to walk round installing 1000 copies of software. Personally, I'd draw the line around 5 copies. Above that, software designed for bulk use is deployed centrally using enterprise deployment tools.
There are even more powerful reasons to do this today, as security updates should be installed almost immediately, and end users won't bother. Generally, the tools are standard, but the vendor adds support for deploying software in these standard frameworks.
Flash: http://www.adobe.com/devnet/flashplayer/enterprise_deployment.html
Acrobat & Reader (forum & links to docs): http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

Memory and Flash

Really really stupid questions ,
what is the difference between RAM and Flash and Memory (in Cisco world)?
How much of what I have? (see config below)
What is the maximum flash and RAM and memory allowed for 2511 router?
Thanks a million !!!!
Router#show versionCisco Internetwork Operating System SoftwareIOS (tm) 2500 Software (C2500-C-L), Version 12.2(26), RELEASE SOFTWARE (fc2)Copyright (c) 1986-2004 by cisco Systems, Inc.Compiled Sat 31-Jul-04 03:31 by eaarmasImage text-base: 0x030416FC, data-base: 0x00001000ROM: System Bootstrap, Version 11.0(10c), SOFTWAREBOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)Router uptime is 7 minutesSystem returned to ROM by reloadSystem image file is "flash:c2500-c-l.122-26.bin"cisco 2511 (68030) processor (revision M) with 6144K/2048K bytes of memory.Processor board ID 08002121, with hardware revision 00000000Bridging software.SuperLAT software (copyright 1990 by Meridian Technology Corp).X.25 software, Version 3.0.0.TN3270 Emulation software.1 Ethernet/IEEE 802.3 interface(s)2 Serial network interface(s)16 terminal line(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read ONLY)

Memory is a really broad term and could reference both RAM and flash, though when used by itself memory usually refers to RAM. RAM is Random Access Memory and a couple of important things about RAM is that it is faster and that it is volatile so that when the router is reloaded or is power cycled the content of RAM is erased. flash is slower and is non volatile memory so that the content of flash are maintained through a reload or power cycle.
Your router has 64 MB of RAM and has 8 MB of flash.
HTH
Rick

Ideapad S2109 ROM equivalent located and flashed! I brought this back to life!!

Similar Messages

Maybe you are looking for