Idoc data modified
Good afternoon:
Does anybody know how to send in an idoc only the modified data?
Thanks in advance.
regards
Hi,
From what I understand,I think you are trying to modify a segemnt with some data.
I also assume that you are working in an include.
Anyway,to do the modification what you can do is loop at the edidd section of the idoc.Then when the segment name is the segment name where you want modification,fill the data in the work area of the segment and then modify the idoc edidd section.
To understand it better please see the piece of code below.
loop at edidd into lw_edidd.
lv_index = sy-index.
when lw_eiddd-segnam = <your segment name>.
lw_segment = lw_edidd-sdata.
clear lw_segment.
lw_segment-f1 = value.
lw_segment-f2 = value.
and so on.
move segment name to <work are type edidd-segnam>.
move lw_segment to <work are type edidd-sdata>.
modify edidd from work are type edidd
index lv_index
transporting segnam sdata.
endloop.
Hope it will bw useful.
Thanks,
Sandeep.
Similar Messages
-
How to edit Idoc data in inbound processing
Moved to correct forum by moderator
Hi All,
How to edit idoc data in inbound processing ? We have a custom FM in inbound scenario and requirement is to update a value in idoc, this value comes after certain processing in custom FM.
I tried editing it through
EDI_DOCUMENT_OPEN_FOR_EDIT
EDI_CHANGE_DATA_SEGMENTS
EDI_DOCUMENT_CLOSE_EDIT
but there is problem in this approach. By this procedure two idocs are created in system, one with original data and one with modified data. We want only one with modified data.
We do not want any direct database table updates.
Please provide appropriate solution.
Note : We are not changing status record. Please do not post replies related to status change
Edited by: Matt on Nov 19, 2008 2:24 PMHi,
You can edit the idoc by doing the following steps:-
1. Goto WE02 transaction and give the IDOC number and execute
2. Once the required IDOC gets retrieved then double on the text pad icon beside the segment which you wanted to change.
3. Select the Data Record at the top and click Display <-> Change option, which will enable you to change the data in that segment.
4. After doing the step 3 then click the save button to save your changes.
5. Then system will generate a new idoc number to store the actual data and your current idoc will hold the new data and the idoc will be in 69 status.
6. Execute the Program RC1_IDOC_SET_STATUS by giving your idoc number and status as 69 and new status 64 and remove the test flag
7. Then the IDOC will be in 64 status and you can reprocess the idoc with the help of the program RBDAPP01 by giving the idoc number.
The above is the entire process for editing the error idoc and reprocessing it again.
I hope I am clear and you understood the entire flow of editing and reprocessing an idoc.
Thanks,
Mahesh. -
How can I use "date modified" from metadata to date iphoto events?
I am very frustrated trying to move photos from windows to iMac. I have a number of photos, all of them have some metadata with date created and date modified. This worked well in Picasa in Windows and kept everything in order. Now it seems iphoto will not read date modified or assigns date created (if there is no date in the metadata) as the date everything was switched over. I looked over some of the wrongly organized photos (there are thousands) and realized that under the old sustem, Picasa in windows must have used either date created or date modified, which ever came earlier or perhaps whichever was available. In iphoto, it doesn't read "date modified" or does this crazy thing where even if the modification date is before the creation date, puts all photos in the order or when they were brought over from windows. I have a lot of photos dated September 18 -- thousands.
Is there any way to get either iphoto or some other program (I'm not terribly impressed by iphoto) that will properly organize the photos in an imac environment. In other words, I want a program to look at (1) creation date or (2) modification date (which-ever is earlier).
Even Picasa is now confused (in the mac envirnoment).
Thanks,
MarkNo, as this is file metadata not photo metadata.
You can adjust the date and time using the Photos -> Adjust Date and Time or even the Photos -> Batch Change command.
Regards
TD -
When a program is installed, it seems to be able to do it (sometimes inappropriately if it hijacks file associations without asking) so why can't I? This is for 10.4.
Specifically:
1. Since installing an HP wireless printer, HP not only tries to install a bunch of sales-ware on your machine that you have to carefully opt out of (annoying, but not a problem if forewarned), it changes the default file association for a number of basic file types, listing all sort of existing files as HP printer files. Using Get Info to change the default file type association globally causes it to mark ALL the files of that type as newly updated, munging the file metdata (which HP did NOT do). Most of the stuff on our computer is sorted by last modified, so if there is a way to fix this in Terminal (to simply fix or remove the HP default tag) without changing the date the file was modified, it would help. Note that uninstalling the program that created the default would do this, but I obviously can't do that (and reinstalling HP would have the same effect). So there has to be another way, right?
2. Since updating iTunes to v.9 a while back, every mp3 is marked as an iTunes file even though iTunes has NO multiple library capability without a wonky reboot using the option key, meaning that if I click on an mp3 downloaded since last update of iTunes, it opens automatically in iTunes and gets added to the SOLE itunes library without asking. (There is no way to toggle between multiple libraries or archive media in separate folders; iPhoto has a similar problem. (Has this been fixed in the latest version of iTunes?) In comparison, Quicktime starts up immediately and does not attempt to create a playlist just because you opened a file and listened to it.
(The iTunes playlists are simply subfolders of the single main library -- and you can't create a new library without doing a wonky procedure by clicking option during startup and telling iTunes to forget where its library is located (includin everything in it) and look up an entirely separate one by hand. So any mp3 file downloaded recently is uploaded to iTunes if you click on it. This wouldn't be problem if it didn't automatically add it to the sole iTunes library just because you clicked on it.)
Besides, all my old mp3s are Quicktime files and they are all archived by date modified. To its credit, ITunes, unlike HP, does NOT hijack older files already on disk and remark them as iTunes files. It only marks newly downloaded files as such. But if I try and change file association for FUTURE mp3 files using Get Info > "use this program for all files of this type", it munges the file metadata (date modified) for all existing files!
Note that in HP case, it apparently does it at the file exchange preference level (or whatever it's called) since the OS then recognizes every file of those types as an HP file. In the iTunes case, it only does it if you download a new media file or open an existing file in iTunes, but again without changing the date it was last edited.
Since these programs are able to change the default file association without changing the date the file was last edited, it should be reversible in Terminal, correct? Why does it change "date modified" when you try and correct metadata using Get Info (or sometimes just by clicking an enclosing folder?) Date modified should be a record of when a file itself was edited, not when it was renamed, or other metadata. Otherwise stuff can't be sorted correctly.The unix commands you need are:
GetFileInfo
SetFileInfo
and maybe find
for cryptic details use the man command
Macintosh-HD -> Applications -> Utilities -> Terminal
man SetFileInfo
You may use the SetFileInfo command to set the file type & the program which will open the file.
# This little gem will do a get info on all files in a directory.
mac $ ls | xargs -I {} GetFileInfo "{}"
file: "/Users/mac/playdoc/oddadocodd"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:53:22
modified: 05/01/2011 14:53:22
file: "/Users/mac/playdoc/one.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:48
modified: 05/01/2011 13:57:48
file: "/Users/mac/playdoc/oneLineFile"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:17
modified: 05/07/2011 14:27:17
file: "/Users/mac/playdoc/oneLineFile.txt"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:49
modified: 05/07/2011 14:27:49
file: "/Users/mac/playdoc/three.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:58:03
modified: 05/01/2011 13:58:03
file: "/Users/mac/playdoc/two.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
file: "/Users/mac/playdoc/weirder.doc.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:50:03
modified: 05/01/2011 14:50:03
# well, ! is a funnie character so we escape it.
mac $ SetFile -t TEXT -c \!Rch two.docx
mac $ GetFileInfo two.docx
file: "/Users/mac/playdoc/two.docx"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
mac $
mac $ date
Sat May 7 14:40:56 EDT 2011
mac $ -
Why does placing links in Illustrator now change the "Date Modified" data for all of my files?
This seems to be a new glitch that started after I installed the latest updates to Illustrator CC (2014) and reoccurs every time on both computers I work on:
When I choose to place a new image in my Illustrator file and the window opens to let me choose a file to place, the "Date Modified" field of all the files in the folder I'm viewing (except other Illustrator files) quickly changes to the current date and time. This is definitely happening when I'm in Illustrator because when I needed files from a folder that had hundreds of images in it and I was able to select a file quickly, I was able to do so before it had changed the date on all of my files. However, when I needed a file from a folder that had hundreds of images in it but I took a long time to find the image I needed, Illustrator had time to change the date modified on all of my files. This might seem like an unimportant issue because it doesn't actually seem to modify or damage any of my files, but having all of the dates change on my files is a serious problem for my workflow and file management issues. So far, my only work around has been to use back-up image files, but that's not a long term solution and I don't understand why Illustrator should be modifying the dates of my files.
Is there a setting I can choose somewhere to prevent this problem? If not, is there somewhere I can report this kind of glitch? I'm not sure if I'm using the exact language necessary to get the issue across so please let me know if you have any questions! Thanks!iCloud is not compatible with Snow Leopard, that is your problem.
A quick way out is to purchase Soho Organizer which is compatible, even when running on Snow Leopard, it will correctly handle Contacts and Calendars from iCloud. $100, 2 user license.
Soho Organizer
There is a free trial if you want to try it. -
I've recently been doing a lot of metadata maintenance in iTunes, and as such, have been using some smart playlists filtered by Date Modified and sorting my main list view by Date Modified, as well. I noticed, upon upgrading to iTunes 8, that the Date Modified field is no longer getting reliably updated like it had been. A lot of the time now, the date won't update until I select the track again in the list view, and then it jumps to the top of the list and disappears from the smart playlist.
In addition, last night I replaces the album art on three albums, each as a group. I then synced my iPhone, and now notice that today, after performing that sync, only some of those tracks have the new artwork, while the rest have the old. That takes this from minor annoyance to performance-hindering bug, when it affects the sync mechanism.I'm not 100% sure but when the finder window was constantly on the focus of the folder that contained the file in question, that's when the date would take time to update. However, since changing my workflow slightly, I now have several finder tabs open and I've found it changes immediately; or at least, it's updated as my focus has moved to another tab and then back to the tab containing the folder. Need more observation to confirm this though.
-
The date modified date for documents does not change
All my documents except for today and yesterday (whenever that happens to be) shows the date modified as being a random date of last year that is not when they were last modified. Does anybody know how to fix the problem so as the documents accurately show when they were last modified?
Go to website.
Change it back.
You will have 2 minutes to delete iCloud from iPhone.
Change it to new one on website and verify.
Sign in new one on the phone. -
In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?sanjempet --
Whew, that's a relief!
But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started! -
Detection Method of Date Modified fails due to copied files date modified change
I've been working through an issue for some time now and I think it's a bug with SCCM 2012 SP1. I've built literally 50 deployments in "Application Management" in SCCM 2012, but I've been chasing my tail on a few of them throwing the
"succeeded but couldn't detect" error. The few that have given me problems are all copying text files and then detect the modified date to verify that the file is there. All worked when I initially built them in Windows 8 but are now failing
randomly...even on a machine where they previously worked and I deleted the files to test the deployment again.
What I'm doing:
My java deployment requires policies which we control with the Deployment.config, deployment.properties and java.policy files. A simple script creates the directories and copies the files. I then create a deployment type for this "ConfigFileCopy.cmd"
and create a detection rule for each file that I am moving over. The detection rule looks for a "date modified" date between the beginning and end of the date for the day I modified the file. This allows me to modify the files to change our
java policies and then redeploy them with the "new" modified date as the detection rule, which forces the update.
The problem:
When I first created my deployment, everything worked pretty well. The files copy out and the script runs successfully. There were some minor tweaks I need to make to my scripts, so I did and then updated the content for the deployment type. I believe this
is where things go a little wonky. At this point, my deployment starts failing with the "0x87D00324" error.
Looking through the logs, everything looks good. The reason configuration manager is failing on detecting the modified date for those files, as it turns out, is because the modified dates don't meet the criteria. So that part is properly failing the detection.
The problem is that the modified dates are correct on the server but not the client. Looking in c:\windows\ccmcache, I can see multiple folders....presumably one for each version of the application that I updated. Looking at any of the newer content folders
for this app, the modified dates are the date and time the file was copied out to the workstation, which is incorrect as the file hasn't been modified during that process.
The odd part, is that this doesn't happen EVERY time on EVERY machine. My primary desktop is windows 8.1 and received the files correctly and installed without issue. My test win 8.1 laptop initially received them correctly, but then as I refined the scripts
it began picking up the wrong modified dates and started failing.
I found a similar issue to this existed in SCCM 2007 (http://support.microsoft.com/kb/2276865) so I suspect that this is truly just a bug that hasn't been addressed (or maybe is fixed in R2). Unfortunately
we have business reasons we can't upgrade to R2 at this time so I'm hoping someone has experienced this and has some sort of work around that might get me by for now. If someone can confirm it is fixed in R2, that would help my case to upgrade as well.
I can work around the issue by changing my logic to detect any date greater than a specific date. But I shouldn't have to do that and I'm concerned there are scenarios I haven't thought of that will cause unexpected behavior or failures with that.
This outlines the behavior. It's apparently by design.
"SCCM has a habit of changing the ‘Date Modified’ timestamp of all files it delivers when it detects an ‘upgrade’ of the source files for that application. It typically does not touch the timestamp
of the source files if it delivers a brand new install to a client that has never received the software, however if a single file in the source folder is changed for that application, then SCCM tries to use a previous version of the application in the cache
(C:\windows\ccmcache) and only downloads the new file that has change. This results in all files having their ‘Data Modified’ timestamp changing (except for the brand new file). Therefore determining if that application has delivered
successfully using ‘Date Modified’ timestamps is not recommended. The key to seeing this process in action is looking at the file properties in the
C:\windows\ccmcache\<sccm code> folder for that application, particularly before and after a file is updated in the original source SCCM application folder."
http://blog.kloud.com.au/tag/sccm/ -
I tryed to sort my pictures with buying Apps and following suggestion from apple, but without any success. In my opinion, the real solution is for Apple to offer us a choice of the photo sort order in ITunes. My preference would be filename, perhaps with options to choose the Date Taken attribute, file timestamp or date modified filestamp.
Not a problem when using iPhoto on a Mac, which the transfer of photos is primarily based on - not manually managing photo storage as seems to be common with Windoze.
The same should be available with a supported photo management app on a PC.
http://support.apple.com/kb/HT4221 -
How to set "Date Modified" as default tab in Open File window
Photoshop CS5.1
When I click on Open File, the window that comes up has several default columns (FileName, Date, Size, etc).
I can right-click on the tab bar and add "Date Modified" to the tabs, but I would like to have "Date Modified" be a default column whenever I open the file selector (and no matter which folder I open up).
I cannot find a way to do this. I want to know the last date I modified a file, not when it was created.
Is there a way to universally set this column as a default?Date modified always shows for me in Details view.
I believe what columns are showing has to do with what columns you've set in Windows Explorer...
Here's an excerpt paraphrased from my Configure the Windows 7 "To Work" Options book that may cover what you need:
Open Windows Explorer...
Navigate to a folder of the type you want to see (e.g., one containing your Photoshop images) and set Details view.
Make the window look the way you'd like future Explorer windows to look. Reorganize Details view columns, e.g., to Name, Size, Type, Date Created, Date Modified, Attributes, etc. and size them so they fit.
Choose Tools - Folder options, then click the View tab.
Click [ Apply to Folders ] to apply the above settings to all folders.
[ OK ] to exit.
Hope this helps.
If the Date modified still doesn't stick for you, there are some other things I've done (and documented) to tweak the configuration of my systems that may help make my seeing the columns being set as shown in the attached image when I choose File - Open in Photoshop.
-Noel -
Idoc data in flat file structure
Dear Experts,
We have idoc data in flat file structure. We need to fetch it using ftp and map it to an idoc.
please tell me how to proceed .
Thanks,
AjuHi,
For flat file you need to use the File content conversion parameters.
Refer the blog,
SAP Network Blog: How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
Thanks
Swarup -
Is Bridge supposed to sort raw files by date modified? Not on my systems.
I have just installed photoshop/bridge cs5 on two windows 7 systems, home premium 64 bit, one an i3 chip and the other an i7 chip. I was formerly using cs3.
I see that Bridge is not sorting my raw files by date modified like it did before. It sorts jpg files okay. I noticed that the xmp files associated with the raw files, when I hover over them in Windows Explorer show the correct modified date but the thumbnail icon shows only creation date, which I assume is as it shou ld be. Why doesn't Bridge CS5 sort raw files by date modified as it did in CS3? CS3 must have referred to the xmp file modified date to use for sorting, I would think.
I should also mention that the metadata file does not show the correct date modified, but gives the same date as the creation date. Also the thumbnails for raw images that have been modified correctly show the icon that indicates it was modified.
Also, I see that when you hover over a thumbnail in Bridge CS5 nothing is revealed about the file. In CS3 Bridge hovering over a thumbnail showed several pieces of data about the file including anything in the file info.
Is this just how Bridge CS5 works or have I missed a setting somewhere in Bridge or Windows?Curt, thanks for your response. The tool tips
was not checked and did result in "hovering"
working. I'm not sure why that's called tool tips, but okay.
I have just installed the software in the last
few days. I almost immediately got an update
notice and installed the update. I thought I was
up to date. Then, just a while ago I got another
update notice. After installing it the sorting
now works. Thanks much. Problems seem to be solved. -
XML IDOC data (hosted on a web server) & handling multiple WSDLs
Hi ALL,
1)how to design an Interface for picking up an XML IDOC data (hosted on a web server) which will be uploaded to SAP or converted to a file
this is what the customer has given me ..can any one explain me this and help me how to more forward
2).This Interface must use UDDI concept because we are going to use multiple BAPIs /RFCs as WSDLs
what is this mean can any send me some document on this
3).Use web-service navigator concept as we will be handling multiple WSDLs
i worked on 1. to define a place holder in WebAS for holding the
wsdls.
2. publish the wsdls in WebAS UDDI Repostory
but i have never used web-service navigator concept as we will be handling multiple WSDLs what is the difference ..send me some step by step docs ..
thanks very much
RK..1.I am not clear with the requirement too. THere is no big deal in sending XML to IDOC or File. Based on your requirement you have to import IDOC structure or ify ou are using file, create a structure for the file.
If u are asking about sendin the XML directly without mapping, even you can do that without MM and even IM.
Please be more elaborate and if you are not clear with what client said, paraphrase them or ask again. Its not good to start work unless we are very clear with the requirement.
you can say to my understanding i feel this, now pI will send data like this. Is it correct?
2. More information on UDDI
http://en.wikipedia.org/wiki/UDDI
I dont think you need to worry much about this now with many features provided in ESR especially
3. http://<Host>:<port>/wsnavigator/
The webservices going out of PI are published here.
provide host and port are host and port details of ext system.
Once you enter link in your browser, it shows the available webservices hosted there.
All you need is to click on the required wsdl and test it.
It is as good as sending your data from PI to other system.
It is similar to Altova XML spy but the difference here is you enter the values directly here but in XML spy we send XML . -
Read MULTIPLE idocs data with all sgmn to my internal table in a single
Dear SAP Folks!
I have a question, I know to read SINGLE idoc data with all segments, we have FM IDOC_READ_COMPLETELY but my requirement is to Read MULTIPLE idocs data with all segments to my internal table in a single shot without keeping this FM in loop! since it is performance issue, at a time i may want to read 1000 idocs data!
Could anyone please let me know is there any way to get this, keeping mind of performance and any other FM?
Best Regards,
SriniHi,
I know idoc numbers and i can write a select Query to DB table EDID4 to get all segments data to my internal table. But i am looking for FM to do this. because i have too many number of idocs and each idoc is having many segments(I am thinking in performance point of view!) The FM IDOC_READ_COMPLETELY can accept only ONE IDOC number as import parameters at a time to get segment data. in similar way do we have any other FM? or other way? except select query to EDID4 table?
Best Regards,
Srini
Maybe you are looking for
-
If the above problem occurs I can open a new home(ie google) in a new tab & it works every time. When original home page isnt frozen & will let you do a google search but displays blank you cannot return to the original page (ie using back button or
-
How do I resize a PDF document byte size
I downloaded a PDF file from Adobe Reader X and an error message came up saying the byte size was to big. It stated the byte size needs to be 500. How do I change it?
-
When I download video from my camera to my Mac, iPhoto "sees" the video as only a single photograph, not as a video. What am I doing wrong?
-
Purchase Returns Freight Recovering accounting entries
HI, We have Scenario where 1. We are returning the material to vendor with the help of Purchase returns PO, with 161 mvt type. 2. we need the accounting entries as follows. PO: Base Price: 100 Freight: 10 Insurance: 10 Tax:2 Gr: Stk A/C 122....Cr Gr/
-
SAP-EHS -Measurement Management -reg
Hi, Through SAP -EH &S , the component of measurement management we would like to implement Can some one help in giving some inputs and any guidance step by step PPT We have SCADA system installed at the cite How the readings from SCADA can be integr