IDOC Port defnition * Urgent*

Hello Gurus,
Could you provide me steps on how to define port and partner profile for IDOCs...
Any help would be highly appreciated.. and points will be rewarded generously..
Thanks and Regards,
Pavan P.

Hi Pavan,
The Port Definition
Transaction: WE21
Path: From the ALE customizing in IMG, choose Sending and Receiving Systems,
Systems in Network, Asynchronous Processing, Assigning Ports, DefinePort.
A port defines the medium in which data is exchanged between the two systems. In the ALE
process, IDocs are transferred via memory. As of release 4.6, six port types are available.
--Transactional RFC (tRFC) :ports used for ALE communication
-- File ports :used by EDI
-- CPI-Cports :used to communicate with R/2 systems
-- Internet ports :used to connect with Internet applications
-- ABAP-PI :ports used to process data via the ABAP programming interface
-- XML ports : used to process files in XML format
NOTE: For port definitions to be generated automatically, the RFC destination
name must be the same as the logical system name.
Port definitions are client-independent objects. The tRFC port used in the ALE process can be
generated automatically when you generate partner profiles, or it can be maintained manually.
Reward with points if helpful.
Regards,
Vijay

Similar Messages

PI: File to IDOC port is empty in R/3 system

Hi,
We send an IDOC from PI. We can see the IDOC in R/3 (WE20) but the "port" is missing under "recipient infromation", there is no character in there. The other fields are all set. Where we have to set our port? In the communication channel is nothing to set.
Thanks
Ronny
Edited by: Ronny Pol on Feb 12, 2010 4:22 PM

No, we are not populating control record data in PI. We deactivated these fields...
Then I guess its unable to pick all the information(regarding sender/receiver port) from standard configuration.
Check the configuration once again that you have done(Abhijit's post above states the steps).
or
If you have time try the approach to populate EDIDC40 node in mapping and checking the option(Apply control record data from payload) in receiver IDOC channel.
Regards
Soumen...

File- idoc, port in control segment not being populated

Hi guys,
I have a file->idoc scenario. Everything works fine, but the receiver port in control segment of idocs has no value. I'm surprised, because this is provided in the Idoc adapter so I thought it is taken from this parameter.
Any ideas, what could be wrong?
Thank you,
Olian

You pls set the indicator - Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values
http://help.sap.com/saphelp_nw70/helpdata/EN/96/791c42375d5033e10000000a155106/frameset.htm

Extended idoc not populating(urgent)

hi guys
i have extended the basic idoc type delvry03 and created an extension delvrtext for it.however when i trigger the idoc from an output type the extended segments are not populated.is there a way you can put a break point in the code.if that is possible it will help me a lot.i am using the FM idoc_output_delvry to create this.i tried putting break points in rsnasted as well as the above FM but it doesnt stop and the idoc gets created.please tell me how do i make sure my code for populating the extended segments is running properly.
please reply as soon as possible.thanks for your time and help.

hi guys.
thanks for the reply first of all.srinivas what do u mean by assign the extension to application object?i have done the configuration in we82 where i have attached the basic idoc type and extension to message type desadv. the function module is attached to the process code which is used in partner profiles for the idoc processing.can u explain me in detail.the idoc standard idoc is getting created but not the extended segments.also there is this weird message when i run a check on the partner profiles as follows
 Entry XIDCLNT300/LS/LS/DESADV /
 Message Control entry exists for this entry
 Port exists
 Basic type exists
 Extension exists
 Combination of basic type and extension is not possible
 Link exists between logical message and IDoc type
what does this mean any idea?
once this check is done probably i can go and do the breakpoints.i just have a feeling that i am missing some small thing here.
please let me know
thanks

Idoc creation problem urgent...

I have a 2 deliveries which has same sold to party 138. The output type defined is ZLDO which is EDI processing. The deliveries are created by batch job.
Partner profile is maintained correctly as well condition record also exits for this partner 138.
But for 1st delivery the IDOC got created correctly and everything is fine.
for second delivery no output was triggered...no Idoc created.
I am enable to find out what is wrong with other delivery..
how should I find???
Please help....its urgent.

Basic type DESADV01
message type DESADV
Partner is 138 which is my sold to party for which partner profile is det correctly.
process code SD05
In NACE appliaction V2 shipping Output type ZLD0...processing routines
Medium 6 EDI program RSNASTED form routine EDI_PROCESSING.
Now codition record is maintined for sold to party 138 in VV23 correctly.
So it should pick this condition automatically. It is doing for first delivery correctly but for second no output is triggered.

IDOC - PORT

We are generating Order05 IDOC and based on a particular condition some IDOCS are needed to be released to Receiving Partner otherwise they need to be collected in the Batch file for Processing.
Immediate Idocs needs to go to the PORT1 and Batch IDOCS needs to go to the PORT2
We have written a Z abap program to meet the above conditions, but our ABAPer says that its not Possible to send the IDOCS to two different Port condition?
Wheter ALE never allow to send an IDOC to more than one PORT?
Thanks.

Hi,
I think you are using Z program to trigger IDoc?
Configure 2 different ports and assign partner profile , while creating you can use partner type LS and for other use US.
then use following fm and fill up the control record with port 1 and call fm
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = idoc_control
TABLES
communication_idoc_control = t_comm_control
master_idoc_data = t_idoc_data
then refresh the control record and fill with port 2 and call fm
aRs

How i can receive & send data through port? urgent

port=9999
data receive in 4 column
name, price, high, low
i want to receive this data & display this data in from & automatic refresh
do u have any idea ?
plz urgent reply

IDS (Internet Developer Suite) is a RAD tool to create database application however that totally depend upon your requirement but if u feels limitation while working on Form IDS , u can switch to Jdeveloper an open source environment but still u have option create bean in Jdeveloper as per your need and bundled it with your Forms.
I still suggest to discuss the problems which you are facing while invoking the bean in your form so that we can guide u better.
Finally, neither move to latest version or change your development platform just for seek of fashion
Hope it clears now!

Inbound Idoc port ???

Hi All,
I am working on proxy to IDoc_AAE scenario. Can anybody tell me from where inbound Idoc will take port?? I have imported inbound parameters in respective partner profile, but not sure from where this idoc is picking port value. Kindly suggest.
Thanks & Regards,
Rashmi Joshi

Hello,
If you already know the port no , you can do that by filling the EDIDC Segment of the Idoc .
Else the Idoc will be sent via the RFC destination configured in the rcver idoc channel
and during the TRFC call system will check for the existing partner profile (the entries set up in we21).
hope this helps .
rgds
Kishore

IDOC- PORT CREATION

Hi all,
1. How to create the port.
2.wats the need of creating port.
3.port has to created for outbound or indound .
please give me the relevent answer.

Hi surprith,
check this..
Port Definition
The port definition defines the medium in which data is exchanged between the two systems in the ALE process, IDocs are transferred via memory. Six port types are available.
     Transactional RFC (tRFC) ports used for ALE communication.
     File ports used by EDI
     CPI-C ports used to communicate with R/2 systems
     Internet ports used to connect with Internet applications
     ABAP-PI ports used to process data via the ABAP programming interface
     XML ports used to process files in XML format.
Port Settings
Implementation Guide for R/3 Customizing (IMG) - Basis Components - Application Link Enabling (ALE) - Sending and Receiving Systems - Systems in Network - Asynchronous Processing
- Define Number Range for Ports
- Define Port
Transaction:   Port Definition     WE21
Port Definition
The port defines the technical characteristics of the connection between SAP and the Subsystem. It also defines the medium in which data is exchanged between the two systems. In the EDI process, IDocs are transferred to external systems via ports. The EDI processes use the file port. The type of port also depends on the receiving side. If the receiver cannot accept data in the medium used by a port, the port cannot be used. For example, the tRFC port cannot be used for EDI unless the receiving subsystem has support for tRFC.
Types of Ports
Port     Function
Transactional RFC     Used for ALE Communication
File     Used by EDI
CPI-C     Used to communicate with R/2 system
Internet     Used to connect with Internet Application
ABAP-PI     Used for Custom IDoc processing via ABAP Programming Interface
XML     Used for processing files in IDoc/XML format
A port is a client-independent object. The parameters specified for port definitions are
     Port: The port name is any meaningful name that uniquely identifies the port.
     Description: This is for documentation purpose only.
     Version: The internal structure of the IDoc has changed in every major release.
     Message Edited by
shibu kurian

Idoc - port xml

hi people,
I have an internal table with 1308 entries. I divide it in internal tables with 300 entries that i send through an idoc in xml format. I run the report but seeing in we05 only i send 3 idocs when should be 5 (4 of 300 segments and 1 of 108). Well, i decide debugg and see possibles errors. I have not found any, i go to we05 and i can see 5 idocs! what?
I repeat this process twice. Is it possible that when I try to create 5 idocs by the xml port is saturating this and it send only 3 and when I debug i am giving time to allow to create 5 idocs?

Hi Manel,
To confirm that this might be an XML port problem,
why don't you create a dummy file port in we21, attach it for your scenario in WE20...and test the program again...
Please verify that all 5 required idocs are created in this case without debugging....
Thanks,
Renjith

IDOC PORTS

Hi,
what r the different types of ports in idoc.
how to activate change pointers globally?
differnt types of IDCOS ?
what is difference between basic idoc and communication idoc?
with regards'
m.srikanth.

hi,
1) A port is a logical representation of a communication
channel in SAP, with the data communicated being IDOCs.
The process flow depends on the port type. Port types are file, trfc, CPI-C, Internet, Programming Interface, XML.
2) To activate change pointers generally, go to BD61 and check the checkbox Change pointers activated - Generally and save.

Activating Change Pointers
Change pointer generation has to be activated at both the
general level and message type.
1) Goto BD61, check the checkbox Change pointers activated - generally.
2) Save
3) Goto BD50, Choose the row for message type MATMAS, and check mark the corresponding field
4) Save
Converting change pointers to IDOCs
Create, change or mark for deletion materials using
transaction MM01, MM02, or MM06.
Execute transaction BD21
Enter Message type MATMAS
Execute
You can see tha changes gets reflected in 810 client that are done in 800 client.
Regards,
sailaja.

Reg: WE19 - IDOC (time_out error) Urgent

Experts,
   I'm repushing the IDOC using WE19 manually.
   Since there is more than 1 lakh of segments in the idoc , it gives me "Time-limit exceeded" dump.
   Please let me know is there any other way to push the idoc ??? any background schedule...
   any inputs on this will be highly rewarded & appreciated
Rgds
Lakshmiraj

Hi,
Is it inbound or outbound IDOC
Thanks
Naren

IDOC problem? URGENT

I have two clients in my IDES 4.7
800 is the sender
810 is the receiver
while creating outbound partner profile in 800 i can mention the username of 810 in the AGENT field. But while creating the inbound partner profile in 810, im unable to mention the username of 810 in the AGENT field because in 810 i'm able to see only the users of 810 but not the users of all the clients as I can do with 800. That's why Outbound IDOC is created and status is 3 in WE02. But in 810, the status is 56 (it says- inbound profile is not created).
So, pls suggest me in this regard..
how to get the users of all the clients in 810 so that i can have the inbound partner profile as well as inbound idoc created with success status 3 in 810.

Hi,
As you have performed all the necessary steps to resolve the issue.I recommend to peroform below steps :
Status Code 56:
We will gwt this status code 56 when we wont create inbound partner profile in Receiver client or server.
Solution: Goto Tcode: BD 87(It will change the Same IDOC)
1.Enter the IDoc NO:
2.Execute(F8)
3.Select the Message Type
4.Process it
If the issue persists, I recommend you to perfrom below steps to resolve your issue.
Goto Tcode: WE19(It will crate new IDOC everytime)
1.Enter the IDoc NO:
2.Execute(F8)
3.Click on standard Inbound
4.using path --->IDOC
> Edit Control Record
>Partner Number(Sender)
All the changes to be done and save and standard inbound.
(Note: Do all changes until the IDOC Error is corrected).
Try to perform these above steps to resolve your issue....
Thanks ,regards
vijay

IDOC MESS ..URGENT..!!

pls help me with this scenario ,
The idocs are coming from an external system called x in flat file .
i have scjeduled the program rseinb00 to create the idocs .
i have done the settings to process these idocs via idoc_input_orders.
Now , if i have made this setting , it means that whenever an idoc of type orders01 will come this FM will be triggered. Does it mean that for inbound it doesnt matter if it comes from system x y or z , once the settings are done in one partner profile it will always use this function module to process any idocs that come on that system .
For eg : I have one partner profile ABC type LS
Inbound parameter : orders , process code ORDE.
Now , if orders01 idoc comes from supoose system A , System B to ABC Logical system , it will process all the orders01 in the same way ??
The issue with me is that :
Once the RSEINB00 creates Idocs , the idoc_input_orders is triggered as per the settings in Partner profile.
My first question is :
What is the standard way of reporting the errors produced during idoc processing to the external system (Non SAP) ?
If i copy the standard FM idoc_input_orders , and try to read the status table , How can I ensure that i read the status of only those idocs that came from System A ?
If I try to set up the ALEAUD01 idoc to produce an audit idoc , how can i ensure that it contains only status of idocs from system A??
I m in a mess , pls help ASAP.

I suspect whether there is a standard way available!
However, there can be a work-around which would call for some development.
Approach could be:
1. Create a ZReport which will fetch all status records for the specified conditions (such as IDoc No., IDoc Create Start/End time etc), format & download the status info (flat file format) to a specified location.
2. Subsystem can pick up the downloaded file by running scheduled job.
3. This report can either be executed manually or scheduled to run at some speficied time intervals.
This approach can be extended to a Z_BAPI function module & this BAPI can be called by the subsystem directly to get the status info of say previously sent IDocs.
Thanks,
Puru

How to get Server Name and port. Urgent.....

Hi,
Please let me know how can i get the server name and port without using request object.
I am getting it :- request.getServerName();
But, pl. let me know how can I get it without using this request object.
Waiting for reply..

I don't know of any way to trivially access that, but why do you need to do this? If you need access to that information in a method that can't see your HttpServletRequest, then perhaps your architecture has a flaw, and you'll be better off in the long run restructuring it.

IDOC Port defnition *** Urgent***

Similar Messages

Maybe you are looking for

IDOC Port defnition * Urgent*