Idoc Segment grouping

Hi All,
I am new to ALE Idoc. I have created few Idoc segments.
Later I have found that i am using few segments in same sequence.
I have thought that if i group these segements into one segement then it will be helpful for me in future.
Please do let me know, by any means can i acheive this.
Thanking you in advance.
Piyush

Hi
It seems that i am unable to convey my requirement in last post.
Sorry for that.
I will explain it by the example.
I have defined Segements Seg1, Seg2, Seg3.
Now while defining basic type, i am using these segments as
Seg1 <<Parent segment>>
Seg2 <<Child Segment>>
Seg3 <<Child Segment>>
I have observed that i need to create the same structure using these 3 segments in <b>different basic types</b>.
Hence if i club these 3 segments into one group or....
and use that group or... while defining new Basic type.
Please do let me know if i am not able to convey the requirement.
If this can be acheived bu some other mean then do let me know.
Thanking you in advance
Piyush

Similar Messages

Issue of grouping IDOC segments in huge loads

Hi All,
My Scenario is File to IDoc. No problem in posting IDoc in R3. But when i see the Idoc structure in R3, all the data records are grouped in different segements as seen below:-
This is how i see in we05.
IDoc No (00000000001234)
- Control Rec.
- Segments 000001 to 001000
- S01 Segment 000001 (Actual records)
- S02 Segment 000002
- S03 Segment 000003
- Segments 001001 to 001001
- S04 Segment 000004
- S05 Segment 000005
- S06 Segment 000006
- Status Rec.
I dont want the grouping of Idoc segments to take place. It should be under same data segment.
Please provide me your valuable solutions to resolve the same.
Note: This problem occurs only when processing huge records.
Thanks in advance,

Hi Sriram,
It is the standard program flow of transaction WE02 which checks the number of segments.if the count is more than 1000,it creates a another group and displays it for the sake of readability.
Anyway it does not affect the inbound processing of the IDOC.
Thank you.
Regards,
Karun.M

EDI: Syntax error in IDoc (mandatory group/segment missing)

hi EDI/IDoc experts,
Need you help urgently. According to the requirement, i need populate a segement E1IDT01 of basic type PEXR2002 . I added the code , then run and generate an idoc , the new segment
E1IDT01 was populated, but Syntax error 26 happend. Error message as below.   It also strange that i can see E1IDKU5 populate out as usual, but some others segment disappeared , i am sure that in my code ,i didn't changed any variable related to other segement . how can i fix this problem?
EDI: Syntax error in IDoc (mandatory group missing)
Message no. E0079
Diagnosis
The segment group E1IDKU5 has the attribute 'Mandatory' in the syntax description of the basic type PEXR2002 (customer enhancement ). However, the segment group is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment group is missing.
Procedure
Please check the IDoc or the syntax description of the basic type PEXR2002 (customer enhancement ).

Hi all,
Thanks so much for your concern!
Finally ,this problem has been figured out .
Requirement is user want to use segment E1IDT01 in idoc to populate the long text they maintained in accounting document vendor item line (use FB01 to create accounting doc).
Why I made out " EDI: Syntax error in IDoc (mandatory group/segment missing)" this message out ,because I didn't fill data correctly. I missed to keep SY-TABIX in momory .
when we use Function module ,or do..enddo...or read table it_table. we should be careful that SY-TABIX is changed .So we can't just use MODIFY EDIDD_TABLE INDEX SY-TABIX in the last . we should define a local variable to keep SY-TABIX in memory and then use it to modify EDIDD_TABLE.
Follow is the final code.
IF SEGMENT_NAME = 'E1IDT01'.
TABLES :STXL.
* Define for long text getting
DATA: LIT_TLINE LIKE TLINE   OCCURS 0 WITH HEADER LINE.
DATA: LV_STRING(2000) TYPE C.
DATA: LV_TDNAME TYPE THEAD-TDNAME,
        LV_ID     TYPE THEAD-TDID     VALUE '0001',
        LV_LANG   TYPE THEAD-TDSPRAS VALUE 'E' ,
        LV_OBJ    TYPE THEAD-TDOBJECT VALUE 'DOC_ITEM'.
data:   LV_LINE   TYPE I,                " long Text lines
        LV_LEN    TYPE I,                " long Text length
        LV_TABIX LIKE SY-TABIX.
* Clear memory
CLEAR:LV_TDNAME,
        LV_STRING,
        LV_LINE,
        LIT_TLINE, LIT_TLINE[],
        LV_LEN,
        LV_TABIX.
* Keep sy-tabix memory using a variable--This is the key point
LV_TABIX = SY-TABIX.
* Combine TDNAME with company code + accounting doc + fiscal year + item number.
    CONCATENATE REGUP_DATA-BUKRS REGUP_DATA-BELNR
                 REGUP_DATA-GJAHR REGUP_DATA-BUZEI INTO LV_TDNAME.
* When vendor item has long text , read long text into lv_string
    SELECT SINGLE *
      FROM STXL
      WHERE TDOBJECT = LV_OBJ
        AND TDNAME   = LV_TDNAME
        AND TDID     = LV_ID
        AND TDSPRAS = 'E'.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          CLIENT   = SY-MANDT
          ID       = LV_ID
          LANGUAGE = LV_LANG
          NAME     = LV_TDNAME
          OBJECT   = LV_OBJ
        TABLES
          LINES    = LIT_TLINE.
      IF NOT LIT_TLINE[] IS INITIAL.
        DESCRIBE TABLE LIT_TLINE LINES LV_LINE.
        DO LV_LINE TIMES.
          READ TABLE LIT_TLINE INDEX SY-INDEX.
          CONCATENATE LV_STRING LIT_TLINE-TDLINE INTO LV_STRING.
        ENDDO.
        LV_LEN = STRLEN( LV_STRING ).
* Make sure we only need less than 840 charicters
        IF LV_LEN > 840.
          LV_STRING = LV_STRING+0(840).
          LV_LEN    = 840.
        ENDIF.
* Populate Vendor item long text with segment E1IDT01 start from
* Fields TXT03 to TXT14.
         EDIDD_TABLE-SDATA+147(LV_LEN) = LV_STRING.
        MODIFY EDIDD_TABLE INDEX LV_TABIX.
      ENDIF.
    ENDIF.
ENDIF.

Adding field in standard IDOC Segment E1EDL24

Hello Friends,
I have an urgent requirement that I have to extend IDOC segment E1EDL24 with two fields PABNR and LFSNR.
When I tries to change the segment in WE31, it shows an error message that you can only modify the segments of customer namespace and cannot modify Standard IDOC Segments.
Can we modify the standard IDOC segments, and if yes, how can we modify the standard IDOC segments. Please clarify.
Points will be rewarded generously.
Regards,
Navin

Hi Naveen,
We cannot Modify the Standard segments. But we have to Create a new Segment and Add these fields.
Then Create an Extended Idoc type
Implement User Exits in Outbound And Inbound ..
This is the Complete Steps and Info on this...with an Example...
Enhancing ALE
For example, if in an outbound interface you find that the IDOC type does not contain all the data you need to pass to the other system, you can extend the IDOC to accommodate the additional fields and enhance the ALE function modules to populate the fields. Similarly, if in an inbound interface, there is additional data that needs to be posted to the R/3 application, you can extend the IDOC type to have additional fields populated by the external system or translator or the other R/3 system and then enhance the inbound ALE function modules to post the additional data to the R/3 application.
let us use the SAP Customer Master application as an example. Specifically, letâs focus on the IDOC extension and ALE function module enhancement of IDOC type DEBMAS02 and message type DEBMAS (Customer Master) and the IDOC reduction of message type MATMAS.
IDOC EXTENSIONS
Letâs first look at the concept of IDOC extension. SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type.
Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
Determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
Use transaction WE30 or from WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object Name.
Choose Extension Type.
Click on Create.
You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
For 4.x, press Create after placing the cursor on segment E1KNVKM.
You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
Click on Segment Editor.
On the next screen, click on Create.
Enter a development class for the object. Enter.
This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
Enter these three columns for all 12 fields. Save.
Click on Generate/Activate, F3 to step back.
From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save.
Save again to store the descriptions of the segment, F3 to step back.
Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
2. Create an IDOC Type.
The next step is to create an IDOC type by associating the extension type that you created with the Basic IDOC type. This is a simple process:
From transaction WE30 or WEDI go to Development -> IDOC Types.
Enter ZDEBMASZ for Object Name.
Click on IDOC Type.
Click on Create.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter a description.
Enter.
You will see a display of the composite IDOC type with all segments, including Z1SADRX (see Figure 3).
It is possible to associate only one extension type with a Basic IDOC type for a given IDOC type. However, you can have multiple new segments in an extension type.
3. Link IDOC Type to Message Type.
The next step is to link the new IDOC type to its corresponding message type. This is important, because this relationship is referenced in the partner profile parameters where you specify the message type and IDOC type to be used for that particular representative system. To link the message type:
Use transaction WE82, or from WE30, go to Environment -> IDOC Type / Message Type, or from WEDI go to Development -> IDOC Type -> Environment Î IDOC Type / Message Type.
Click on Display <-> Change.
Click on New Entries.
Enter DEBMAS for message type.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter your SAP R/3 release number for Release.
Save.
This data is stored on the EDIMSG table and is accessed by several ALE processes to relate the message type to the IDOC type.
4. Check the IDOC Type.
Before checking the IDOC type for consistency, it is important to perform another step that releases the extension type to the IDOC type:
From WEDI go to Development -> IDOC Types -> Extras -> Release Type, or from transaction WE30 go to Extras -> Release Type.
For the Object Name ZDEBMASX and radio button Extension Type, click Yes.
The extension type has now been "released."
You canât edit the extension type once itâs released. To cancel the release for further editing or deactivation, go to WE30 Î Extras Î Cancel release. The final step in the IDOC extension process is checking the validity of the IDOC type:
From transaction WE30 or WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object name.
Click on Extension Type.
From the Development Object menu select Check.
Repeat the operation for IDOC type ZDEBMASZ.
A check log will be generated for each run with details of correctness or errors (see Figure 4).
In some situations it is possible to receive errors during the check process, especially segment length errors. The incorrect IDOC segment can be repaired and corrected by executing program RSEREPSG. This program checks the formal consistency and repairs incorrect segments. In test mode it will generate a log of formal correctness for the specified segment only. For the program to repair segments in normal mode, the underlying IDOC structures (DDIC structures) must be active. This program rectifies the lengths of the DDIC structures and not the fields themselves. RSEREPSG can also be used to change the person responsible for the object and the release flag.
Menu paths may vary slightly depending on the release/version of SAP R/3, but the procedures and the principles are the same.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
Error handling is a very important consideration when making enhancements to inbound ALE/EDI objects. In ALE and EDI inbound processing, workflow is used for handling errors at different levels such as technical and application. If workflow has been configured for the interface, the error messages and workflow items flow to the inbox of the named recipient(s).
It is also critical to enhance the workflow that handles notifications of the inbound ALE/EDI process. In most scenarios this is not a very difficult task because SAP lets you influence the workflow parameters and messages in function exits (customer functions). You typically do this using flags and message codes to trigger certain workflow actions. If you conform to the status codes and flags stipulated for workflow processing, the enhancement could be error-free and seamless. In the case of an inbound IDOC with an extension, you should populate the EDIDC fields IDOCTYP (new IDOC type) and CIMTYP (extension type) accordingly.
Reward if Helpful

Idoc Error - EDI: Syntax error in IDoc (segment cannot be identified)

Hi All,
have created a new reduced message type for our new vendor A/C group through BD53. Also done reqd config for sending the vendor master through this message type. .
I have created couple of vendors for testing with X01 with withholding tax functionality and when try to send these vendors , Idocs are getting failed .
When I create vendor without withholding tax functionality , idoc is getting posted succesfully . If create vendor with entries in the feild whih are related to withholding tax . Idocs are getting failed .
If I see the status in WE05 ,Idocs which are posted succefully are showing the basic type as CREMAS03 . For idocs which are getting failed have the basic type as CREMAS04 and also the extension as Z1CREMAS . I don`t understand why the system is defaulting CREMA04 & Z1CREMAS when I send the vendor master with withholding tax feild entries.
I am not much familiar with ALE /Idoc set up. Please can any body help me to resolve the issue.
The error message in we05 as below
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment Z1LFA1M does not occur at the current level of the basic type CREMAS04 (extension Z1CREMAS).
This error can have several reasons:
The segment Z1LFA1M is assigned to a group whose header segment does not occur.
The segment Z1LFA1M does not exist in the syntax description of the basic type CREMAS04 (extension Z1CREMAS).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type CREMAS04 (extension Z1CREMAS).
Thanks

Hi,
I don`t understand what do you mean release after adding segment.
Message type works i.e. Idoc get posted if I send with the vendor w/o withholding tax field entries. Idoc fails when send vendor with withholding tax field entry.
Regards

IDOC Status 26: EDI: Syntax error in IDoc (segment cannot be identified).

Hi All,
I have created IDOC extension for IDOC Basic type "PROACT01" and have followed all required necessary steps but getting IDOC
Status 26. EDI: Syntax error in IDoc (segment cannot be identified). The exact error is:
Please check Error Details and the details of the steps I followed for Setting up IDOC Extension:
Error Detail :
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment ZPROSEG does not occur at the current level of the basic type PROACT01 (extension PROACTEX).
This error can have several reasons:
The segment ZPROSEG is assigned to a group whose header segment does not occur.
The segment ZPROSEG does not exist in the syntax description of the basic type PROACT01 (extension PROACTEX).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type PROACT01 (extension PROACTEX).
Can you please look at this problem and suggest what is wrong with IDOC Extension/Custome Segment?
Below is the Details of the Steps which I have followed:
1. Tcode WE31 - Created new custom Segment ZPROSEG with 4 fields. Released segment.
2. TCode WE30 - Created IDOC Extension PROACTEX for Basic Type PROACT01. Released IDOC extension.
Here when I run syntax check warning appears "No predecessors exist". I am not sure if its okay!!
3. TCode WE82 - Added Extension PROACTEX in the Message Type PROACT with BASIC Type PROACT01.
4. TCode WE20 - Added IDOC Extension PROACTEX in the predefined partner profile in WE20 transaction.
5. Added the following code in the Customer Exit EXIT_SAPLWVMI_001 include ZXWVMIU01 .
DATA segnam(27).
READ TABLE dedidd WITH KEY segnam = 'ZPROSEG'.
IF sy-subrc NE 0.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
APPEND dedidd.
ENDLOOP.
ENDIF.
Finally ran transaction WVM2 (Transfer of Stock & Sales Data) to generate IDOC, its creating IDOC but when checked IDOC in WE05 its getting Status Error "26".
Looking forward for your reply.
Many thanks in advance.

Hello,
Actually you are appending the Z segment instead of inserting into the correct position. So the segment is added at the last, so hierarchy of segments is collapsed.
So get the index of the previous segment E1EDP31 and increase the index by 1 and INSERT the Z segment with that new index as below.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
lv_index = sy-tabix. " <<--
ADD 1 TO lv_index. " <<--
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
*APPEND dedidd.
INSERT dedidd INDEX lv_index. " <<---
ENDLOOP.
Here actually we are insering the record inside the LOOP and it regenerates the index again. It is not actually a good practice.
So the best practice is get the index and generate the segment inside the loop, store them into another internal table, come out the loop and insert the Z segments into DEDIDD by looping the new internal table.

EDI: Syntax error in IDoc (segment cannot be identified)

Hi All,
Im facing the below error EDI: Syntax error in IDoc (segment cannot be identified).
And this error is coming only for few idocs rest are getting processed successfully.
Message no. E0078
Diagnosis
The segment E1EDP03 does not occur at the current level of the basic type ORDERS05 (extension ).
This error can have several reasons:
The segment E1EDP03 is assigned to a group whose header segment does not occur.
The segment E1EDP03 does not exist in the syntax description of the basic type ORDERS05 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type ORDERS05 (extension ).
Please suugest.
Thanks,
Spandana

Hi,
Is this standard program or custom program?
you might be appending the Z segment instead of inserting it. Always best practice is get the index of the segment and instert it.
If all the data is not populated then segment position will change incase of appending. Please check your code and revert back.
Refer the below link for detailed information.
IDOC Status 26: EDI: Syntax error in IDoc (segment cannot be identified).
Thank you

Regarding EDI: Syntax error in IDoc (segment cannot be identified)

Hi,
My requirement is that I was adding two diffrent field values under two diffrent segments as "E1EDKA1" and "E1EDK02" in outbound invoice IDOCS, INVOIC02 (process code: SD09 - IDOC_OUTPUT_INVOIC).
I am getting the IDOC number through Tcode "VF02". Can any body give me idea how to check that syntax error in debug mode.
Please find the following error details using TCODE "WE02".
*EDI: Syntax error in IDoc (segment cannot be identified)*
*Message no. E0 078*
*Diagnosis*
*The segment E1EDKA1 does not occur at the current level of the basic type INVOIC02 (extension ).*
*This error can have several reasons:*
*The segment E1EDKA1 is assigned to a group whose header segment does not occur.*
*The segment E1EDKA1 does not exist in the syntax description of the basic type INVOIC02 (extension ).*
*The sequence of segments in the group in which the segment appears is incorrect.*
*Previous errors ('mandatory' segment or group missing) may be due to this error.*
Please help me to resolve this problem. <REMOVED BY MODERATOR>
Regards,
Skumar.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:09 PM

It seems that you added segment E1EDKA1 at a place where it is not supposed to be. That's where this error is coming from. The structure of every IDOC is definded by SAP standard and you cannot change the sequence or the level of standard segments. If you require a certain field at a certain level you have to add that field to a Z-segment and then add that Z-segment where appropriate in your extension.
Hope that helps,
Michael

IDOC - segment Qualifier

Dear all,
Do you know the transaction or an document which give the link between the Qualifier segment of an segment IDOC and the SAP field ?
for example : IDOC ORDERS05
segment E1EDK03
qualifier 002 : wished delivery date in VA01
segment E1EDK02
qualifier 050 : Delivery Order in segment description but correspond to PO number in VA01
I search to fill in the field PO Date but I don't find the qualifer segment.
Could you please help me ?
thanks
Véronique

Hi friends,
i thing your problem will solve.
E1EDK01 : IDoc: Document header general data
Segment definition E2EDK01005 Released since Release 45B , Segment length: 0357
ACTION : Action code for the whole EDI message
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
KZABS : Flag: order acknowledgment required
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 002, Offset : 0066. external length : 000001
CURCY : Currency
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 003, Offset : 0067. external length : 000003
HWAER : EDI local currency
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 004, Offset : 0070. external length : 000003
WKURS : Exchange rate
internal data type : CHAR
Internal length : 000012 characters
Position in segment : 005, Offset : 0073. external length : 000012
ZTERM : Terms of payment key
internal data type : CHAR
Internal length : 000017 characters
Position in segment : 006, Offset : 0085. external length : 000017
KUNDEUINR : VAT Registration Number
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 007, Offset : 0102. external length : 000020
EIGENUINR : VAT Registration Number
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 008, Offset : 0122. external length : 000020
BSART : Document type
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 009, Offset : 0142. external length : 000004
BELNR : IDOC document number
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 010, Offset : 0146. external length : 000035
NTGEW : Net weight
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 011, Offset : 0181. external length : 000018
BRGEW : Net weight
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 012, Offset : 0199. external length : 000018
GEWEI : Weight unit
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 013, Offset : 0217. external length : 000003
FKART_RL : Invoice list type
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 014, Offset : 0220. external length : 000004
ABLAD : Unloading Point
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 015, Offset : 0224. external length : 000025
BSTZD : Purchase order number supplement
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 016, Offset : 0249. external length : 000004
VSART : Shipping Conditions
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 017, Offset : 0253. external length : 000002
VSART_BEZ : Description of the Shipping Type
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 018, Offset : 0255. external length : 000020
RECIPNT_NO : Number of recipient (for control via the ALE model)
internal data type : CHAR
Internal length : 000010 characters
Position in segment : 019, Offset : 0275. external length : 000010
KZAZU : Order Combination Indicator
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 020, Offset : 0285. external length : 000001
AUTLF : Complete delivery defined for each sales order?
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 021, Offset : 0286. external length : 000001
AUGRU : Order reason (reason for the business transaction)
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 022, Offset : 0287. external length : 000003
AUGRU_BEZ : Description
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 023, Offset : 0290. external length : 000040
ABRVW : Usage Indicator
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 024, Offset : 0330. external length : 000003
ABRVW_BEZ : Description
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 025, Offset : 0333. external length : 000020
FKTYP : Billing category
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 026, Offset : 0353. external length : 000001
LIFSK : Delivery block (document header)
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 027, Offset : 0354. external length : 000002
LIFSK_BEZ : Description
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 028, Offset : 0356. external length : 000020
EMPST : Receiving point
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 029, Offset : 0376. external length : 000025
ABTNR : Department number
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 030, Offset : 0401. external length : 000004
DELCO : Agreed delivery time
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 031, Offset : 0405. external length : 000003
WKURS_M : Indirectly quoted exchange rate in an IDoc segment
internal data type : CHAR
Internal length : 000012 characters
Position in segment : 032, Offset : 0408. external length : 000012
E1EDK14 : IDoc: Document Header Organizational Data
Segment definition E2EDK14 Released since Release 30A , Segment length: 0038
QUALF : IDOC qualifer organization
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
ORGID : IDOC organization
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 002, Offset : 0066. external length : 000035
E1EDK03 : IDoc: Document header date segment
Segment definition E2EDK03 Released since Release 30A , Segment length: 0017
IDDAT : Qualifier for IDOC date segment
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
DATUM : IDOC: Date
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 002, Offset : 0066. external length : 000008
UZEIT : IDOC: Time
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 003, Offset : 0074. external length : 000006
E1EDK04 : IDoc: Document header taxes
Segment definition E2EDK04001 Released since Release 40B , Segment length: 0107
MWSKZ : VAT indicator
internal data type : CHAR
Internal length : 000007 characters
Position in segment : 001, Offset : 0063. external length : 000007
MSATZ : VAT rate
internal data type : CHAR
Internal length : 000017 characters
Position in segment : 002, Offset : 0070. external length : 000017
MWSBT : Value added tax amount
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 003, Offset : 0087. external length : 000018
TXJCD : Tax Jurisdiction
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 004, Offset : 0105. external length : 000015
KTEXT : Text Field
internal data type : CHAR
Internal length : 000050 characters
Position in segment : 005, Offset : 0120. external length : 000050
E1EDK05 : IDoc: Document header conditions
Segment definition E2EDK05001 Released since Release 40A , Segment length: 0185
ALCKZ : Surcharge or discount indicator
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
KSCHL : Condition type (coded)
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 002, Offset : 0066. external length : 000004
KOTXT : Condition text
internal data type : CHAR
Internal length : 000080 characters
Position in segment : 003, Offset : 0070. external length : 000080
BETRG : Fixed surcharge/discount on total gross
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 004, Offset : 0150. external length : 000018
KPERC : Condition percentage rate
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 005, Offset : 0168. external length : 000008
KRATE : Condition record per unit
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 006, Offset : 0176. external length : 000015
UPRBS : Price unit
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 007, Offset : 0191. external length : 000009
MEAUN : Unit of measurement
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 008, Offset : 0200. external length : 000003
KOBTR : IDoc condition end amount
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 009, Offset : 0203. external length : 000018
MWSKZ : VAT indicator
internal data type : CHAR
Internal length : 000007 characters
Position in segment : 010, Offset : 0221. external length : 000007
MSATZ : VAT rate
internal data type : CHAR
Internal length : 000017 characters
Position in segment : 011, Offset : 0228. external length : 000017
KOEIN : Currency
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 012, Offset : 0245. external length : 000003
E1EDKA1 : IDoc: Document Header Partner Information
Segment definition E2EDKA1003 Released since Release 45A , Segment length: 0995
PARVW : Partner function (e.g. sold-to party, ship-to party, ...)
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
PARTN : Partner number
internal data type : CHAR
Internal length : 000017 characters
Position in segment : 002, Offset : 0066. external length : 000017
LIFNR : Vendor number at customer location
internal data type : CHAR
Internal length : 000017 characters
Position in segment : 003, Offset : 0083. external length : 000017
NAME1 : Name 1
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 004, Offset : 0100. external length : 000035
NAME2 : Name 2
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 005, Offset : 0135. external length : 000035
NAME3 : Name 3
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 006, Offset : 0170. external length : 000035
NAME4 : Name 4
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 007, Offset : 0205. external length : 000035
STRAS : Street and house number 1
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 008, Offset : 0240. external length : 000035
STRS2 : Street and house number 2
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 009, Offset : 0275. external length : 000035
PFACH : PO Box
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 010, Offset : 0310. external length : 000035
ORT01 : City
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 011, Offset : 0345. external length : 000035
COUNC : County code
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 012, Offset : 0380. external length : 000009
PSTLZ : Postal code
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 013, Offset : 0389. external length : 000009
PSTL2 : P.O. Box postal code
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 014, Offset : 0398. external length : 000009
LAND1 : Country Key
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 015, Offset : 0407. external length : 000003
ABLAD : Unloading Point
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 016, Offset : 0410. external length : 000035
PERNR : Contact person's personnel number
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 017, Offset : 0445. external length : 000030
PARNR : Contact person's number (not personnel number)
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 018, Offset : 0475. external length : 000030
TELF1 : 1st telephone number of contact person
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 019, Offset : 0505. external length : 000025
TELF2 : 2nd telephone number of contact person
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 020, Offset : 0530. external length : 000025
TELBX : Telebox number
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 021, Offset : 0555. external length : 000025
TELFX : Fax number
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 022, Offset : 0580. external length : 000025
TELTX : Teletex number
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 023, Offset : 0605. external length : 000025
TELX1 : Telex number
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 024, Offset : 0630. external length : 000025
SPRAS : Language key
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 025, Offset : 0655. external length : 000001
ANRED : Form of Address
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 026, Offset : 0656. external length : 000015
ORT02 : District
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 027, Offset : 0671. external length : 000035
HAUSN : House number
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 028, Offset : 0706. external length : 000006
STOCK : Floor
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 029, Offset : 0712. external length : 000006
REGIO : Region
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 030, Offset : 0718. external length : 000003
PARGE : Partner's gender
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 031, Offset : 0721. external length : 000001
ISOAL : Country ISO code
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 032, Offset : 0722. external length : 000002
ISONU : Country ISO code
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 033, Offset : 0724. external length : 000002
FCODE : Company key (France)
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 034, Offset : 0726. external length : 000020
IHREZ : Your reference (Partner)
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 035, Offset : 0746. external length : 000030
BNAME : IDoc user name
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 036, Offset : 0776. external length : 000035
PAORG : IDOC organization code
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 037, Offset : 0811. external length : 000030
ORGTX : IDoc organization code text
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 038, Offset : 0841. external length : 000035
PAGRU : IDoc group code
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 039, Offset : 0876. external length : 000030
KNREF : Customer description of partner (plant, storage location)
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 040, Offset : 0906. external length : 000030
ILNNR : Character field, length 70
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 041, Offset : 0936. external length : 000070
PFORT : PO Box city
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 042, Offset : 1006. external length : 000035
SPRAS_ISO : Language according to ISO 639
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 043, Offset : 1041. external length : 000002
TITLE : Title
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 044, Offset : 1043. external length : 000015
E1EDKA3 : IDoc: Document Header Partner Information Additional Data
Segment definition E2EDKA3 Released since Release 30D , Segment length: 0073
QUALP : IDOC Partner identification (e.g.Dun&Bradstreet number)
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
STDPN : Character field, length 70
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 002, Offset : 0066. external length : 000070
E1EDK02 : IDoc: Document header reference data
Segment definition E2EDK02 Released since Release 30A , Segment length: 0058
QUALF : IDOC qualifier reference document
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
BELNR : IDOC document number
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 002, Offset : 0066. external length : 000035
POSNR : Item number
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 003, Offset : 0101. external length : 000006
DATUM : IDOC: Date
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 004, Offset : 0107. external length : 000008
UZEIT : IDOC: Time
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 005, Offset : 0115. external length : 000006
E1EDK17 : IDoc: Document Header Terms of Delivery
Segment definition E2EDK17 Released since Release 30A , Segment length: 0076
QUALF : IDOC qualifier: Terms of delivery
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
LKOND : IDOC delivery condition code
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 002, Offset : 0066. external length : 000003
LKTEXT : IDOC delivery condition text
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 003, Offset : 0069. external length : 000070
E1EDK18 : IDoc: Document Header Terms of Payment
Segment definition E2EDK18 Released since Release 30A , Segment length: 0089
QUALF : IDOC qualifier: Terms of payment
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
TAGE : IDOC Number of days
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 002, Offset : 0066. external length : 000008
PRZNT : IDOC percentage for terms of payment
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 003, Offset : 0074. external length : 000008
ZTERM_TXT : Text line
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 004, Offset : 0082. external length : 000070
E1EDK35 : IDoc: Document Header Additional Data
Segment definition E2EDK35000 Released since Release 45A , Segment length: 0078
QUALZ : Qualifier for IDoc additional data
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
CUSADD : Data Element Type CHAR Length 35
internal data type : CHAR
Internal length : 000035 characters
Position in segment : 002, Offset : 0066. external length : 000035
CUSADD_BEZ : Character field of length 40
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 003, Offset : 0101. external length : 000040
E1EDK36 : IDOC: Doc.header payment cards
Segment definition E2EDK36000 Released since Release 45A , Segment length: 0114
CCINS : Payment cards: Card type
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 001, Offset : 0063. external length : 000004
CCINS_BEZEI : Description
internal data type : CHAR
Internal length : 000020 characters
Position in segment : 002, Offset : 0067. external length : 000020
CCNUM : Payment cards: Card number
internal data type : CHAR
Internal length : 000025 characters
Position in segment : 003, Offset : 0087. external length : 000025
EXDATBI : IDOC: Date
internal data type : CHAR
Internal length : 000008 characters
Position in segment : 004, Offset : 0112. external length : 000008
CCNAME : Payment cards: Name of cardholder
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 005, Offset : 0120. external length : 000040
FAKWR : Maximum amount
internal data type : CURR
Internal length : 000015 characters
000002 decimal places, without sign
Position in segment : 006, Offset : 0160. external length : 000017
E1EDKT1 : IDoc: Document Header Text Identification
Segment definition E2EDKT1002 Released since Release 45A , Segment length: 0089
TDID : Text ID
internal data type : CHAR
Internal length : 000004 characters
Position in segment : 001, Offset : 0063. external length : 000004
TSSPRAS : Language Key
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 002, Offset : 0067. external length : 000003
TSSPRAS_ISO : Language according to ISO 639
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 003, Offset : 0070. external length : 000002
TDOBJECT : Texts: Application Object
internal data type : CHAR
Internal length : 000010 characters
Position in segment : 004, Offset : 0072. external length : 000010
TDOBNAME : Name
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 005, Offset : 0082. external length : 000070
E1EDKT2 : IDoc: Document Header Texts
Segment definition E2EDKT2001 Released since Release 40A , Segment length: 0072
TDLINE : Text line
internal data type : CHAR
Internal length : 000070 characters
Position in segment : 001, Offset : 0063. external length : 000070
TDFORMAT : Tag column
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 002, Offset : 0133. external length : 000002
E1EDP01 : IDoc: Document Item General Data
Segment definition E2EDP01007 Released since Release 640 , Segment length: 0542
POSEX : Item number
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 001, Offset : 0063. external length : 000006
ACTION : Action code for the item
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 002, Offset : 0069. external length : 000003
PSTYP : Item Category
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 003, Offset : 0072. external length : 000001
KZABS : Flag: order acknowledgment required
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 004, Offset : 0073. external length : 000001
MENGE : Quantity
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 005, Offset : 0074. external length : 000015
MENEE : Unit of measure
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 006, Offset : 0089. external length : 000003
BMNG2 : Quantity in price unit
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 007, Offset : 0092. external length : 000015
PMENE : Price Unit of Measure
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 008, Offset : 0107. external length : 000003
ABFTZ : Agreed cumulative quantity
internal data type : CHAR
Internal length : 000007 characters
Position in segment : 009, Offset : 0110. external length : 000007
VPREI : Price (net)
internal data type : CHAR
Internal length : 000015 characters
Position in segment : 010, Offset : 0117. external length : 000015
PEINH : Price unit
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 011, Offset : 0132. external length : 000009
NETWR : Item value (net)
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 012, Offset : 0141. external length : 000018
ANETW : Absolute net value of item
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 013, Offset : 0159. external length : 000018
SKFBP : Amount qualifying for cash discount
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 014, Offset : 0177. external length : 000018
NTGEW : Net weight
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 015, Offset : 0195. external length : 000018
GEWEI : Weight unit
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 016, Offset : 0213. external length : 000003
EINKZ : Flag: More than one schedule line for the item
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 017, Offset : 0216. external length : 000001
CURCY : Currency
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 018, Offset : 0217. external length : 000003
PREIS : Gross price
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 019, Offset : 0220. external length : 000018
MATKL : IDOC material class
internal data type : CHAR
Internal length : 000009 characters
Position in segment : 020, Offset : 0238. external length : 000009
UEPOS : Higher-Level Item in BOM Structures
internal data type : CHAR
Internal length : 000006 characters
Position in segment : 021, Offset : 0247. external length : 000006
GRKOR : Delivery group (items delivered together)
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 022, Offset : 0253. external length : 000003
EVERS : Shipping instructions
internal data type : CHAR
Internal length : 000007 characters
Position in segment : 023, Offset : 0256. external length : 000007
BPUMN : Denominator for Conv. of Order Price Unit into Order Unit
internal data type : DEC
Internal length : 000005 characters
No decimal places, without sign
Position in segment : 024, Offset : 0263. external length : 000006
BPUMZ : Numerator for Conversion of Order Price Unit into Order Unit
internal data type : DEC
Internal length : 000005 characters
No decimal places, without sign
Position in segment : 025, Offset : 0269. external length : 000006
ABGRU : Reason for rejection of quotations and sales orders
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 026, Offset : 0275. external length : 000002
ABGRT : Description
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 027, Offset : 0277. external length : 000040
ANTLF : Maximum number of partial deliveries allowed per item
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 028, Offset : 0317. external length : 000001
FIXMG : Delivery date and quantity fixed
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 029, Offset : 0318. external length : 000001
KZAZU : Order Combination Indicator
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 030, Offset : 0319. external length : 000001
BRGEW : Total weight
internal data type : CHAR
Internal length : 000018 characters
Position in segment : 031, Offset : 0320. external length : 000018

Retrieve IDoc Segment Format

I am using the SAP function IDOC_SEGMENT_STRUCTURE_READ to retrieve the structure of an IDoc segment. This function returns a table SEGMENT_STRUCT of type LEDID_T_SEGMENT_STRUCT.
When I call this function from my ABAP function, I am using the following definition for the table I am sending to IDOC_SEGMENT_STRUCTURE_READ:
Data: lt_segstru type table of LEDID_T_SEGMENT_STRUCT.
I am using the same type in my internal function as is used in the SAP function, but when I try to activate my function, I am receiving the following error:
The type "LEDID_T_SEGMENT_STRUCT" is unknown.
I see that LEDID_T_SEGMENT_STRUCT points to the type group of LEDID. How do I write my table definition in my calling function to match the format of the table returned in IDOC_SEGMENT_STRUCTURE_READ?

Hi!
you can try with this program:
don't forget to include the "TYPE-POOLS ledid." line at the begining, this is the reason why you are receiving the error message.
REPORT ztestdpo2                               .
TYPE-POOLS ledid.
PARAMETERS: p_segtyp LIKE edisegmhd-segtyp.
DATA t_segment_struct TYPE ledid_t_segment_struct.
DATA wa_segment_struct LIKE LINE OF t_segment_struct.
CALL FUNCTION 'IDOC_SEGMENT_STRUCTURE_READ'
EXPORTING
RELEASE                         = SY-SAPRL
    segtyp                          = p_segtyp
VERSION                         = '3'
TABLES
    segment_struct                  = t_segment_struct
EXCEPTIONS
   segment_unknown                 = 1
   segment_structure_unknown       = 2
   segment_not_in_release          = 3
   OTHERS                          = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT t_segment_struct INTO wa_segment_struct.
WRITE:/ wa_segment_struct.
ENDLOOP.
Saludos
Daniel

Replaced value is not getting relected in IDOC segment field

Hi,
Need your help for the below issue.
I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
Function Module which I am using is IDOC_INPUT_MBGMCR as a copy.
Here is my code given below:
SELECT
            SINGLE vbeln
              INTO lx_vbeln
              FROM lips
             WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
MOVE-CORRESPONDING e1bp2017_gm_item_create
               TO goodsmvt_item.
Then this is passed as TABLE in "BAPI_GOODSMVT_CREATE".
Please do the needful.

Hi Dheepa,
Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
Reddy

Unable to change the length of field in idoc segment

Dear all,
My requirement is to change the length of a field(Z field) in a segment (Z Segment). I tried the following but in vain
1)Tried to Cancel the release and then change the length of the domain. Unfortunately it is givin an error saying "Error while resetting release of segment ZC9DEMARA01".
I also tried cancelling hte release of extension and then cancelled the release of segment
2) Created a new version, but in new version the earlier fields are diabled. So I am unable to edit.
I have gone through some of the links available in SDN but I could not solve as I am unable to cancel the release in the first step.
[Idoc segment field length changes]
Could you please help me.
Thanks in advance!
regards,
Aravind

Hello Aravind,
I Have created one Segment type with some fields, changed the field length also its working.
just try to cancel the release and change the length of the filed and do it set release again.
Try it .
Thanks,
santhosh

Idoc Segment Cancel release error

Hi all,
I have problem in cancelling the release of an Idoc Segment. I have a requirement to add new fields to the segment. When I try to do Edit->Cancel Release it is throwing below error.
"Error while resetting release of segment Z1PXXXX
Message no. EA259"
Could anyone tell me how to overcome this error or the root cause of this error?
Many Thanks,
Sri
Edited by: Arunsri on Nov 10, 2009 8:37 AM

Hello,
The reason that you are getting these errors is that you cannot cancel
the release of an extension made in previous version e.g. 4.6C. Instead you have to
create a new extension.
It is not possible to change a segment definition which is released in a
lower release. This is a basic concept of our release strategy to
guarantee compatibility between different releases.
You must create a new segment definition for the new release e.g. 620 with a new segment
field with the appropriate length. In transaction WE20, outbound parameters, you can specify
the "segment release in IDoc type" for the communication. Please read the F1 help of this field for further
information.
For your own segments you can define a new version of the segment via
transaction WE31 -> Add Version (Shift+F5).
Please review your online help for more information on this and related topics.
Hope this information helps.
Regards,
David

Problem with creation of IDOC Segment Type

Hi,
I tried to create IDOC Segment Type Z1LFA1 but error
prompted "Structure Z1LFA1 already exist.".
I tried deleting it at se11 but prompted
"You cannot edit object R3TR TABL Z1LFA1 with the
standard editor"
and at sm30-TADIR, but prompted
with "Cannot delete object directory entry, object exists."
How will go about this??
Please help!
Thanks!

hi,
yup, tried doing that on we31 but the segment does not exist yet.
we're currently upgrading from 4.6 to ecc, I think the structure
was tranferred to our ecc client but the idoc segment and idoc type were not. I'll just have to transport it then.
Thanks!

How to Read Idoc - Segment fields values and status messages

Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
Kumar

You need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    MSG_ID   = EDIDS-STAMID
    MSG_NO   = V_MSGNO
    MSG_VAR1 = EDIDS-STAPA1
    MSG_VAR2 = EDIDS-STAPA2
    MSG_VAR3 = EDIDS-STAPA3
    MSG_VAR4 = EDIDS-STAPA4
IMPORTING
    MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a®

Idoc Segment grouping

Similar Messages

Maybe you are looking for