IDT ODBC Error - Data source name not found...

Hello,
In the IDT, I have created a successful connection to a Relational Connection to my SQL Server datasource. However, when I try to access the data in the Data Foundation, I get the error, "ODBC Driver Manager. Data source name not found and no default driver specified. I am trying to use a shortcut to the connection in the repository. I am able to make a local connection to this database using the same steps above but I'm only getting this error when using the respository connection.
I appologize if I have not explained this well or used the right terminology as I've only been using this tool for about a month with very little support. The support I do get does not know what this problem is as they are able to connect to it fine on their computer.
Thank you for your time and responses,
Aaron

Hi Aaron
This is the product limitation.
Combination of 32-bit and 64-bit data providers in a Multi-source enabled Data Foundation is not supported.
Remove ODBC Drivers 32-bit for SQL Server from the user's workstation and Install ODBC Drivers
64-bit.
Regards,
Veer S.

Similar Messages

Error 2003000: ODBC Error: Data source name not found or no default driver

Hi Guys
I am running Essbase (9.3.1) Integration server on 64-bit Microsoft Windows server 2003 (SP 2) and I get above error when I am trying create an OLAP metadata catalog using Integration Service Console.
Could anybody help me please?
Regards
Chandra

Good day to you too, and thank you very much for your help.
I think you may be right. I didn't run the configurability utility and I am running Essbase Server & Integration Server as console applications (not as windows services). The problem with the Integration server is there no console application window for it but there is one for Essbase Server which I had to enter the password. If I run the Integration Server again under Command prompt then I get a message saying that it has been already running on this machine but I cannot see any console window. Do you think if reboot the server this problem go away? I look forward to hearing from.
Regards
Chandra

Error on SQL-DMO ( ODBC Driver data Source name not found)

I Found the below error and all my maintenance jobs were failing with the same error.
Do any one have any clue on it. help is much appriciated.
Microsoft (R) SQLMaint Utility (Unicode), Version ??????
Copyright (c) Microsoft Corporation.
[Microsoft SQL-DMO (ODBC SQLState: IM002)] Error 0: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Sreeni

Let us know if you see this issue in SQL 2014 as well. You can quickly create a SQL Server 2014
Virtual machine on Windows Azure .
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-provision-sql-server/
Thanks, Sethu Srinivasan [MSFT] SQL Server http://blogs.msdn.com/sqlagent -------------------------------------------------------------------------------- This posting is provided &quot;AS IS&quot; with no warranties, and confers no rights.
Please remember to click &quot;Mark as Answer&quot; and &quot;Vote as Helpful&quot; on posts that help you. This can be beneficial to other community members reading the thread.

OBDC Data Source Error - Data source name not found and no default driver specified

Hello,
I get this error whenever I try to use the "Modify Microsoft Access Database" tab to update my
Access 2000 database after a conversion:
Unable to connect to target database.
java.sql.SQLException: [Microsoft] [ODBC Driver Manager]
Data source name not found and no default driver specified
Now, the weird thing is that when I log in as Administrator and go to the "Control Panel" there is
no "ODBC Data Sources" option to chose from. So I went to the "Microsoft ODBC Administrator"
from the "Configuration and Migration Tools" tab instead. I tried configuring "omwb_msaccess"
under the "User DSN" tab with both the name of my Access file, and the "small.mdb" file that was
in the omb directory. No go for either one. Whatever I try I still get the same pop-up box.
Question:
(1) What should I be putting for the "ODBC Data Source" when I try to Migrate my Access Database?
(2) Any other idea/configuration issue I might be missing that could do this? The process works up
to the Access Update point, and I configured the repository correctly.
Thanks
Aaron - [email protected]

Nope, I'd already tried both of those things. I checked again, but no go.
I think the problem may be that I'm not entering the right value in the
"ODBC Data Source" field on the Migration Workbench "Modify Microsoft
Access Database" form - the same one where you enter a "Username" and
"Password" for the conversion. What should I be entering here? What is
the standard filename?
The log files aren't very informative to me. Here is the odbcconf.log:
==============
ODBCConf called with arguments: '/S /Lv odbcconf.log /F C:\WINNT\System32\mdaccore.rsp'
Data Struct:
     Reboot First : 0
     Use Response File : 1
     Response File : 'C:\WINNT\System32\mdaccore.rsp'
     Erase Response File: 0
     Silent : 1
     Continue on Error : 0
     Log Mode : 2
     Log File : 'odbcconf.log'
     Actions:
          8, '(null)', '(null)', ''
          6, 'MS Code Page Translator|Translator=MSCPXL32.dll||', '(null)', '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
          5, 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||', '(null)', '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
          1, 'Microsoft ODBC for Oracle', 'CPTimeout=60', '"Microsoft ODBC for Oracle" "CPTimeout=60"'
          17, 'simpdata.tlb', '(null)', '"simpdata.tlb"'
EXECUTING ACTIONS
Executing Action: INSTALLDRVRMGR
          arg1: '(null)'
          arg2: '(null)'
          args: ''
Install Driver Manager succeeded
          Return HR: 0x0
Executing Action: INSTALLTRANSLATOR
          arg1: 'MS Code Page Translator|Translator=MSCPXL32.dll||'
          arg2: '(null)'
          args: '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
INSTALLTRANSLATOR SQLInstallTranslatorEx succeeded
          Return HR: 0x0
Executing Action: INSTALLDRIVER
          arg1: 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||'
          arg2: '(null)'
          args: '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
INSTALLDRIVER SQLInstallDriverEx succeeded
          Return HR: 0x0
Executing Action: CONFIGDRIVER
          arg1: 'Microsoft ODBC for Oracle'
          arg2: 'CPTimeout=60'
          args: '"Microsoft ODBC for Oracle" "CPTimeout=60"'
CONFIGDRIVER SQLConfigDriver succeeded
          Return HR: 0x0
Executing Action: REGTYPELIB
          arg1: 'simpdata.tlb'
          arg2: '(null)'
          args: '"simpdata.tlb"'
          Return HR: 0x0
===========
Here is a snippet from the error.log:
==========
** Oracle Migration Workbench
** Release 9.2.0.1.0 Production
** ( Build 20020308 )
** ORACLE_HOME: c:\
** user language: en
** user region: US
** user timezone: PST
** file encoding: Cp1252
** java version: 1.1.8.16
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 5.0
** Classpath:
c:\\Omwb\olite\Oljdk11.jar;c:\\Omwb\olite\Olite40.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;c:\\Omwb\jlib;c:\\Omwb\jlib\Omwb.jar;c:\\Omwb\jlib\oembase-9_2_0.jar;c:\\Omwb\plugins\SQLServer6.jar;c:\\Omwb\plugins\SQLServer7.jar;c:\\Omwb\plugins\SQLServer2K.jar;c:\\Omwb\plugins\Sybase11.jar;c:\\Omwb\plugins\Sybase12.jar;c:\\Omwb\plugins\MSAccess.jar;c:\\Omwb\plugins\MySQL.jar;c:\\Omwb\drivers\mm.mysql.jdbc-1.2a;c:\\Omwb\plugins\Informix7.jar;c:\\Omwb\drivers\ifxjdbc.jar;c:\\Omwb\plugins\db2400v4r5.jar;c:\\Omwb\drivers\jt400.jar;c:\\lib\xmlparserv2.jar;c:\\rdbms\jlib\xsu111.jar;c:\\jdbc\lib\classes111.zip;c:\\lib\vbjorb.jar;c:\\jlib\netcfg.jar;c:\\jlib\ewt3.jar;c:\\jlib\ewtcompat-3_3_15.jar;c:\\jlib\share.jar;c:\\jlib\help3.jar;c:\\jlib\oracle_ice5.jar;c:\\jlib\kodiak.jar
** Started : Tue Jul 23 12:13:42 PDT 2002
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
** The following plugins are installed:
** Microsoft Access Release 9.2.0.1.0 Production
** Active Plugin : MSAccess
** Shutdown : Tue Jul 23 12:14:59 PDT 2002
I appreciate any assistance you could render me.
Thanks - Aaron

Infa Error: Data source name not found and no default driver specified

All,
Infa version 8.1, DAC 795. Plain vannila installation with SQL server. Both client and server installed in same machine.
DAC connectivity both with infa and oltp working fine. When ETL is run, Informatica session logs are giving following error:
ERROR 10/2/2008 3:49:01 PM node01_PPMBIDEV1 MAPPING CMN_1022 Database driver error...
CMN_1022 [
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Database driver error...
Function Name: Connect
Database driver error...
Function Name: Connect
Database Error: Failed to connect to database using user [MDVYAS] and connection string [PPMCRMDEV1@OracleBI_Warehouse].]
Any pointers appreciated

Hi,
Did you follow step 4.13.2 - 'Configuring Relational Connections in Informatica PowerCenter Workflow Manager' of the installation and configuration guide?
Manoj.

EIS : Data source name not found and no default driver specified

Hi
I have Oracle Essbase installed in a x86_64 machine.
I have configured odbc 64 bits how is indicated in SQL Interface Guide, but when try to create catalog the message "ODBC Error [DataDirect][ODBC lib] Data source name not found and no default driver specified"
The is.sh script set these environment variables:
#!/usr/bin/ksh
export ISHOME=/u01/app/oracle/Middleware/EPMSystem11R1/products/Essbase/eis/server
export EPM_ORACLE_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export HYPERION_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export ARBORPATH=$ISHOME
export ESSBASEPATH=$ISHOME
export ISLOADINFO=$ISHOME/loadinfo
export ISODBC=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0
export ODBCINI=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0/odbc.ini
export TEMP=/tmp
case `uname` in
AIX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LIBPATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LIBPATH;;
HP-UX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export SHLIB_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$SHLIB_PATH;;
Linux)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH ;;
SunOS)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH;;
echo `uname -a`;;
esac
export CLASSPATH=$EPM_ORACLE_HOME/common/jlib/11.1.2.0/epm_j2se.jar
export PATH=$JAVA_HOME/bin:$ISHOME/bin:$PATH

Hi Andres, Can you please tell me how you resolved this issue? I'm getting the same error when I start EIS as windows services, but when I start from console it works fine.
Updated................Issue resolved!!!
OK. Upon researching other windows forums found that I had to add System DSN to ODBC administrator under "C:\Windows\*SysWOW64*\odbcad32.exe". This is because the server is a windows 64-bit machine.
Thanks
Edited by: U12345 on Dec 14, 2010 5:58 AM
Edited by: U12345 on Dec 14, 2010 6:01 AM

Data source name not found and no default driver specified.

Hi all,
I am using Microsoft Accessas as backn'd. when I am starting my Presentation Services I am getting this error> Data source name not found and no default driver specified.

Your presentation services configuration file
$SADATADIR/web/config/instanceconfig.xml
contains an entry DSN which is the connection to the bi server
then inside your RPD(s) loaded by the bi server
you will have various connection pools in the physical layer
which connect to physical data sources such as MS Access
you can test a physical database connection
by right clicking a physical table
then "View Data" or "Update Row Count"

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

WIS: 10901 Data source name not found and no default driver specified(ODBC)

Hi, gurus.
We've created a universe based on Excel spredsheet or MS Access which is using ODBC connection. Then, I try to create query (which is using these universe) in QAAWS or in InfoView, and when I add a filter object to the query, the error occurs:
"GetDatasourceObject LOV exception (error WIS: 10901)".
If I don't choose any filter options and want to create query, I'm getting the error: ' [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (error WIS: 10901)'.
We tried to do this in different operations systems - Windows 7 (32 bit) and XP (32 bit).
Anymore, we can use this universes at web intelligence rich client with or without filters.
Need to solve this problem. Please help us.

Dear all,
I got the same problem, I have installed BOE 4.0 at Win XP 64 bits, and also installed Sybase IQ 15.2 (32bit) ODBC, and has create the odbc entry "shkdemo" at the System Tab. However, I still got the same error when using the the "Interactive Analysis" thru "BI Launch pad".
For BOE 4.0, I found that I could only use the BOE Client tools (Universal Design Tool) to create the connection, this client tool I installed it at another 32 bit XP laptop, and I also installed the Sybase IQ 15.2 (32bit) ODBC with the same odbc entry "shkdemo", and using the "Interactive Analysis Desktop, I could be able to create report with data from IQ 15.2.
Kindly advise, why I still got the error of "10901 Data source name not found and no default driver specified(ODBC)" when I use the "Interactive Analysis" thru "BI Launch pad".
Cheers,
Hilda

10901 Data source name not found and no default driver specified(ODBC)"

Dear all,
I have installed BOE 4.0 at Win XP 64 bits, and also installed Sybase IQ 15.2 (32bit) ODBC, and has create the odbc entry "shkdemo" at the System Tab. However, I still got the above error when using the the "Interactive Analysis" thru "BI Launch pad".
For BOE 4.0, I found that I could only use the BOE Client tools (Universal Design Tool) to create the connection, this client tool I installed it at another 32 bit XP laptop, and I also installed the Sybase IQ 15.2 (32bit) ODBC with the same odbc entry "shkdemo", and using the "Interactive Analysis Desktop, I could be able to create report with data from IQ 15.2.
Kindly advise, why I still got the error of "10901 Data source name not found and no default driver specified(ODBC)" when I use the "Interactive Analysis" thru "BI Launch pad".
Cheers,
Hilda

Remember the client tools are 32 bit, BOE 4.0 is 64 bit. Thus a document using a 32 bit client will connect to 32 bit ODBC datasource. A 64 bit application (BOE 4.0) will be looking for 64 bit ODBC datasource. You mention you installed Sybase IQ 15.2 (32bit) ODBC which is great for the 32 bit client tools, but 64 bit BOE will not be able to use this.
See a related article; [Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e]
- Ludek

Data source name not found and no default driver specified in Database Error Code -2147467259

When I say it works, I mean that it gets no errors and writes the data to the SQL Table. The Connection name and table name are correct as written.

Hey people,
I'm having issues when trying to use the DB Tools open connection.vi in order to write data to a SQL data table. In my VI I have two different states that handle different data based on a specific test specified to run, but both are inserted into the same SQL table. I get the unspecified error "NI_Database_API.lvlibB Tools Open Connec (String).vi->Main.vi<ERR>ADO Error: 0x80004005
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in NI_Database_API.lvlibB Tools Open Connec (String).vi->Main.vi"
when running one test but not the other...since the error is unspecified I'm having a hard time finding any information that might help me.

Linked Server [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wall

Hi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Connect to MS Access using NetBeans, data source name not found!

Hi
NetBeans IDE 7.3 and OS was Windows 7 (64-bit )
When I run my program by NetBeans, it complain about the following errors.
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
In fact, the MS Access file had exist the specify path, I can run the jar file (not in IDE environment) and connect to MS Access DB successfully.
And I had search from network, and found it said "the ODBC source was run by different server", one was C:\Windows\SysWOW64\odbcad32.exe for 32-bit and c:\windows\system32\odbcad32.exe for 64-bit.
So the question is, why IDE cannot connect to MS Access DB, How to set NetBeans IDE to make it connectable to 32 bits or 64 bits ODBC, like the program run without IDE?
Thanks!

user13005878 wrote:
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedThat reads like "your datasource configuration is not good, fix it"
And I had search from network, and found it said "the ODBC source was run by different server", one was C:\Windows\SysWOW64\odbcad32.exe for 32-bit and c:\windows\system32\odbcad32.exe for 64-bit. It would make a whole lot of sense if that was the other way around, don't you think? SysWOW64 for 64 bits and system32 for 32 bits.
So the question is, why IDE cannot connect to MS Access DBBecause something is wrong
How to set NetBeans IDE to make it connectable to 32 bits or 64 bits ODBC, like the program run without IDE?By setting the correct connection configuration properties.
I'm not 100% positive, but I believe that doing ODBC connections from a 64 bits environment is not actually supported in Java. You may be outraged by that - in Java 8 the ODBC-JDBC bridge is going to be completely dropped, no more connecting to Access from Java without third party libraries (which tend to be commercial). In any case for now try to use a 32 bits Java runtime if you're using a 64 bits one.

Getting "Data source name not found and no default driver specified"

Hi all,
I'm trying to create a connection in SQL Developer (1.5.0.53) to an Access MDB using the Access Tab on the "New / Select Database Connection" window. I navigate to my MDB and then click the Test button and this is what I get:
"Status : Failure - Test failed: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
I do have the 1.6 JVM.
Not a show stopper, but would like to see how SQL Developer works with Access tables, so any help would be appreciated.
TIA,
Steve

This error message sounds like the MS Access ODBC driver or the Jet Engine drivers are not found. First of all you need to check the PATH environment setting if it includes the windows/system32 directory as this is the default directory for the MS Access ODBC drivers.
Next check if you are a normal user or a local admin user. As local admin open the ODBC Adminstartor (Control Panel/administrative tools) and check if a MS Access ODBC driver is registered.
If all above is true, please get from www.sysinternals.com and et the process monitor. Open it and apply a filter: Process name is sqldevloper.exe
Then start SQL Developer and open your created MS Access link. Process mon will now track all info containing all additional DLLs it tries to load.
Check out the generated log file from the bottom (last info about the mdb file load) to the top and look if it really finds all libraries, especially the MsAccess and Jet libraries.

IDT ODBC Error - Data source name not found...

Similar Messages

Maybe you are looking for