IE 7 throws a no data set error

IE 7 is throwing the following error.
spry:region or spry:detailregion attribute has no data set!
Firefox does not. Anybody know why this is caused. I have
checked the xml returned in IE and it does parse it correctly.
Thanks
Kevin

Just curious have you guys figured out what the deal was with
this?
You should also check to see if you have nested regions. We
currently don't support nested regions, and folks sometimes see
this error when they have one.
--== Kin ==--

Similar Messages

Open data Set Error?

Hi Guys,
              I am using Open dataset for downloading the data into Application server   .I am getting the error file path is not opened but in al11 i was able to see the path what i mentioned here except bseg.txt file.I am getting error at Open data set statement.I have to write the bseg table data into the file bseg.txt in application server.can any body suggest the solution for this problem.
          Very urgent.
wa_BSEG_file = '/interfaces/DR1/MM/outbounb/ZMMOF3007/BSEG.txt'.
OPEN DATASET wa_BSEG_file FOR OUTPUT         "Write to appl. server
                                      IN TEXT MODE
                                      Encoding default. "Open dataset Return code
IF sy-subrc = 0.
TRANSFER it_cosp1 to wa_BSEG_file.
Write : 'File Transferred BSIK'.
ELSE .
Write : 'File Not Found / Transferred BSIK'.
ENDIF.
   CLOSE DATASET wa_BSEG_file.
           Very urgent.Full marks will be alloted if u give me the correct answer.
Thanks,
Gopi.

Hi,
Due to serveral reasons
1. Check whether you have proper authority in the directory?
2. check the whether any files with same name?
3. use addition message in the open dataset statement so that you can know the system message it getting.
DATA: msg(100).
OPEN DATASET wa_BSEG_file FOR OUTPUT MESSAGE msg
IN TEXT MODE Encoding default.
aRs

Spry Data Set error in IE8

I'm creating a page that uses a Spry Data Set for a book I'm working on. I have no problem with the data set when viewing the page in IE9 beta and Safari. Two separate testers who are using IE8 get the same error: "type="MM_SPRY_DATA_REFERENCE" .... translatorClass="MM_SPRY">Truth
Here is the page code from my version of the page, which does work for me. Another tester did not have this problem, also working in IE8. Any help would be appreciated! Thanks.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Flower Meanings</title>
<style type="text/css">
body {
    background-image: url(images/baskets_bkg.jpg);
</style>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var flower_meanings = new Spry.Data.HTMLDataSet("flower_data.html", "Table1");
var Meanings = new Spry.Data.HTMLDataSet("flower_data.html", "Table1");
</script>
</head>
<body>
<h1>Common Flowers and their Meanings
</h1>
<p>
<div class="MasterDetail">
<div spry:region="Meanings" class="MasterContainer">
    <div class="MasterColumn" spry:repeat="Meanings" spry:setrow="Meanings" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">{Name}</div>
</div>
<div spry:detailregion="Meanings" class="DetailContainer">
    <div class="DetailColumn">{Image}</div>
    <div class="DetailColumn">{Meaning}</div>
</div>
<br style="clear:both" />
</div>
<p>
</body>
</html>

To get the best support from this forum, it is always a good idea to give us a link to your website.
The code that you have shown us is OK although the two datasets puzzel me.
Now I am going on the guessing tour.
are you using Spry version 1.6.1
have you tried to link your files (JS) to a working outside source
have you tried IE6 and IE7
is the error in the form of a popup or is it the yellow triangle
A link to your site is still the best option.
Gramps

Open Data Set Error while trying to read file from non SAP server

Hi all,
is it possible to read data from non-SAP application Sever?
I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
I make test to read file from SAP application server and it was ok.So how to call other server?
Thanks!

Hi,
Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
Regards,
Gilberto Li

Page process throwing No data found error when deleting tabular form item

Hi guys,
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
     for i in 1..apex_application.g_f02.count LOOP
          IF apex_application.g_f01(i) is not null THEN
               UPDATE STOCK
                    SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
               WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
               COMMIT;
          END IF;
     END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
Would be grateful if someone could shed some light on this. Many thanks.
Edited by: taepodong on Jul 1, 2012 7:54 AM

Hi,
>
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
     for i in 1..apex_application.g_f02.count LOOP
          IF apex_application.g_f01(i) is not null THEN
               UPDATE STOCK
                    SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
               WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
               COMMIT;
          END IF;
     END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
>
You are iterating on the f02 and checking for f01 not null. That is wrong usage of the the checkbox item. Please see these links . especially the OnSubmit Process examples.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215
Regards,
PS : This is what you need to understand
>
<b>Note that check boxes displayed using APEX_ITEM.CHECKBOX will only contain values in the APEX_APPLICATION arrays for those rows which are checked. Unlike other items (TEXT, TEXTAREA, and DATE_POPUP) which can contain an entry in the corresponding APEX_APPLICATION array for every row submitted, a check box will only have an entry in the APEX_APPLICATION array if it is selected.</b>
>
Edited by: Prabodh on Jul 2, 2012 9:44 AM

OBIEE 11g BI Publisher; New Data Set Creation Error "Failed to load SQL"

Hi,
I'm trying to create a new SQL data set (from a client machine). I use "query builder" to build the data set. But when I click "OK", it fires the error "Failed to load SQL".
But strangely, if connect to the OBIEE server's desktop and create the data set it works without any issues. I wonder this would be a firewall issue. If so what are the ports I should open.
It's a enterprise installation. And we have already open 9703, 9704, and 9706.
Has anyone came across such a situation?

Talles,
First of all you might have more chance of getting a response over in the BIP forum. Other than that all I can think of is: is your MS SQL Server running with mixed mode auth?

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

Java Character set error while loding data using iSetup

Hi,
I am getting the following error while migrating settup data from R12 (12.1.2) Instance to another R12 (12.1.2) Instance, Both the Database has same DB character set (AL32UTF8)
we are getting this error while migrating any setup data
Actual error is
Downloading the extract from central instance
Successfully copied the Extract
Time taken to download Extract and write as zip file = 0 seconds
Validating Primary Extract...
Source Java Charset: AL32UTF8
Target Java Charset: UTF-8
Target Java Charset does not match with Source Java Charset
java.lang.Exception: Target Java Charset does not match with Source Java Charset
     at oracle.apps.az.r12.common.cpserver.PreValidator.validate(PreValidator.java:191)
     at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:119)
     at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
     at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Error while loading apis
java.lang.NullPointerException
     at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:158)
     at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
     at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Please help in identifying and resolving the issue
Sachin

The Source and Target DB character set is same
Output from the query
------------- Source --------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
And target Instance
-------------- Target----------------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
The Error is about Source and Target JAVA Character set
I will check the Prevalidator xml from How to use iSetup and update the note
Thanks
Sachin

Error message when using Spry Data set with XML

Hi,
I have what i see as a big problem, might just be me being
dumm, but here we go.
When I try to use the feature of spry XML Data Set and insert
spry table I get error message when trying it in IE 7.
There are even a problem when I use fireworks automated slide
show function, where you can choose to use the Spry/XML gallery
feature.
The error message I get everytime (incl the auto gallery in
fireworks) is:
The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
The tag: "div" doesn't have an attribute: "spry:region" in
currently active versions.[XHTML 1.0 transitional]
The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
and so on.
What´s wrong?!

Hello barvid,
Ok, let's take each problem step by step:
1. The first error you see in the browser: " Exception while
loading ..." normally appears when you try to load files that are
not permitted by the browser security model. This means the XML
file you try to load is located on a different server than your
HTML which is not allowed. The browser is not permitting to load
any files that are not in the same domain as the current page
because of the complex security risks. You'll have to either get
the XML file from its original location and save it in your website
or use a proxy on your web server that should request that file
from the external server and send it to the browser as an XML from
the same domain as the HTML origin.
1.2 The "Exception while loading ..." error you see is a
generic error and my previous advise is based on my experience. In
case this is not your scenario you'll have to open the SpryData.js
and around line 112 you'll see the following code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + e);
Please change this line with the following line of code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + (e.message?e.message:e));
to obtain a more verbose error message that may clarify the
reasons of your errors.
2. The problems you describe are not browser errors but they
are w3c validation errors. At this point the XHTML standard allows
every application that define custom namespace attributes to also
link a DTD to the page so the page to continue to be valid.
Unfortunately at this point this feature is not correctly supported
by the FF and IE so we wrote an articles about how you should
link
the Spry DTD to your page so the validator understand the
custom attributes Spry use. You'll find inside the full description
of the problems and all the technical details you'll need to know
to solve this issue.
Regards,
Cristian

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

Error "failed to retrieve data set (ds1) for spry:repeat" in IE when using filters

Everything works fine in Firefox, but in IE7 I get an error
message saying "Failed to retrieve data set (ds1) for spry:repeat."
It seems to be my filter set that's causing this. Once I commented
out the chunk of code that handles filtering, the page finally
loaded. How can I get it to work in IE?
Here's the page:
http://a44.awardspace.com/testing/mbc/portfolio/

This usually means the dataset (ds4) can not be found / is not created.
So double check that you have created the dataset.
If this is the case.. please provide us with a online url.

Small error in Spyr Data Set overview

Just a small error in the Spyr Data Set overview page which
might confuse beginners trying to understand new things like Xpath.
http://labs.adobe.com/technologies/spry/articles/data_set_overview.html
Under Figure 4. Selected nodes for XPath
"/gallery/photographer", John Doe's @id should be 4532, not 16.

Thanks for noticing!
We will check it out and fix it.
Thanks,
Donald Booth
Adobe Spry Team

ERROR: spry:region or spry:detailregion attribute has no data set!

here's the basics...
i'm running fusebox for php (if that makes any difference)
i'm also reusing the same gallery for multiple fuseactions,
and using my circuit.xml file to set the var $gallery
depending on which fuseaction has been called.
the photos already exist in a database and full size and
thumbs have already been created by imagemagick
i plan on writing a script that uses imagemagick to get the
dimensions of the imagefiles and saves them to four respective new
columns in my db table (so i hope the problem isn't related to the
height attributes not being set in my xml.... let's hope it's
somthing else, ok?)
i'm creating my datasets like this
quote:
var dsGallery = new Spry.Data.XMLDataSet("/index.php",
"gallery", { method: "POST", postData: "do=m.get<?php echo
$gallery ?>Gallery", headers: { "Content-Type": "text/xml" });
var dsPhotos = new Spry.Data.XMLDataSet("/index.php",
"gallery/photos/photo", { method: "POST", postData:
"do=m.get<?php echo $gallery ?>Gallery", headers: {
"Content-Type": "text/xml"});
the output xml is perfect... here's an example
http://www.inkincnewyork.com/index.php?do=m.getFlashGallery
since i'm reusing the gallery, and have no need for the
dsGalleries related functionality i did this.
using the long way of referencing each piece of data, just to
make sure it's all kosher
quote:
<div id="thumbnails" spry:region="dsPhotos dsGallery">
<div spry:repeat="dsPhotos"
onclick="HandleThumbnailClick('{ds_RowID}');"
onmouseover="GrowThumbnail(this.firstChild,
'{dsPhoto::photo/@thumbwidth}', '{dsPhoto::photo/@thumbheight}');"
onmouseout="ShrinkThumbnail(this.firstChild);"><img
id="tn{ds_RowID}" alt="thumbnail for {dsPhoto::photo/@thumbpath}"
src="{dsGallery::thumbnail/@base}{dsPhoto::photo/@thumbpath}"
width="24" height="24" style="left: 0px; right: 0px;"
/></div>
<p class="ClearAll"></p>
</div>
but i am now getting this error
spry:region or spry:detailregion attribute has no data set!
for each XMLDataSet
anyone have any ideas?

A few things I noticed when looking at your sample source
above:
The "Content-Type" should be the type for the post data, not
what you expect to get back. So in your case, you should be using:
"Content-Type": "application/x-www-form-urlencoded";
which is the default type so you don't really have to pass it
to the constructor unless you are posting something other than that
type.
Next, your {ds_RowID} data references are missing the data
set prefix. If you use more than one data set for a given region,
you need to use the prefix to make sure you are getting the
ds_RowID from the correct data set.
The error: "spry:region or spry:detailregion attribute has no
data set!" tells me that the data sets are not defined at the time
Spry first processes the region. Are your data sets being created
in a script tag in the head? Or are you creating them in some
function that gets fired off at a specific time?
--== Kin ==--

ERROR : Cannot get data set while connecting to BI.

Hi,
I am trying to connect to BI trouggh my application. I am following one of the document which i got from SDN. But now i am getting ERROR : Cannot get data set while connecting to BI. Can any one tell me why i am getting this error.
when i tried to excecute first time it gave the same error for the bellow given Querry. But after that it got excecuted. Then again It gave the same error. But it got excecuted twise like that after that it dint get excecuted once also.
Querry: SELECT
[Measures].MEMBERS ON AXIS(0) ,
NON EMPTY [0VENDOR].MEMBERS ON AXIS(1)
FROM [0PUR_C01/0PUR_C01_DB_Q04];
Regards,
H.V.Swathi
Edited by: H.V Swathi on Jun 1, 2009 1:33 PM

HI,
Thanks for ur reply.
NO
i am using this part of code to display the result in IFrame.
IConnectionFactory connectionFactory = null;
     IBIConnection connection = null;
     IBIDataSet dataset = null;
//        get the MDX statement entered by the User
     String mdxStatement = wdContext.currentContextElement().getMDXQ();
     wdComponentAPI.getMessageManager().reportSuccess("mdxStatement "+mdxStatement.toString());
//        Declare a stringbuffer to store the HTML Code
     StringBuffer l_strXmlFile = new StringBuffer();
     wdComponentAPI.getMessageManager().reportSuccess("l_strXmlFile "+l_strXmlFile.toString());
     try {
//        Connect to BW System
     Context initctx = new InitialContext();
//        Perform JNDI lookup to obtain connection factory
        wdComponentAPI.getMessageManager().reportSuccess("l_strXmlFile eeeeee ");
     connectionFactory =
     (IConnectionFactory) initctx.lookup(
     "deployedAdapters/SDK_XMLA/shareable/SDK_XMLA");
//        Establish connection using default connection properties
        wdComponentAPI.getMessageManager().reportSuccess("connectionFactory "+connectionFactory);
     connection =
     (IBIConnection) connectionFactory.getConnectionEx(null);
     wdComponentAPI.getMessageManager().reportSuccess("connection "+connection);
     IBIOlap olap = ((IBIConnection) connection).getOlap();
     wdComponentAPI.getMessageManager().reportSuccess("olap "+olap);
//     Execute the MDX statement and retrieve the data set
//     using the execute method of the IBIOlap interface.
dataset = olap.execute(mdxStatement);
wdComponentAPI.getMessageManager().reportSuccess("dataset "+dataset);
} catch (Exception e) {
e.printStackTrace();
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(),
true);
} finally {
try {
connection.close();
} catch (Exception e1) {
//     TODO Auto-generated catch block
e1.printStackTrace();
if (dataset == null) {
wdContext.currentContextElement().setResult_Visibility(
WDVisibility.NONE);
} else {
wdContext.currentContextElement().setResult_Visibility(
WDVisibility.VISIBLE);
//     Render the data set.
l_strXmlFile
.append("<html>")
.append("<head></head>")
.append("<body>");
//     Display the MDX that has been executed.
l_strXmlFile
.append("<p><b>MDX Statement that was executed:</b><br> ")
.append("<span class=\"code\">")
.append(mdxStatement)
.append("</span> </p>");
try {
BIDataSetTableModel table =
new BIDataSetTableModel(dataset, false);
l_strXmlFile.append("<p>Result set:</p>");
l_strXmlFile.append(
"<table width=700 border=1 cellpadding=0 cellspacing=0>");
int row = table.getRowCount();
int col = table.getColumnCount();
for (int i = 0; i < row; i++) {
l_strXmlFile.append("<tr>");
for (int j = 0; j < col; j++) {
BITableItem item = (BITableItem) table.getValueAt(i, j);
l_strXmlFile.append("<td class=\"headCenter\">"); l_strXmlFile.append(Helpers.escape(item.toString()));
l_strXmlFile.append("</td>");
l_strXmlFile.append("</tr>");
l_strXmlFile.append("</table>");
l_strXmlFile.append("</body></html>"); } catch (BISQLException e2) {
//     TODO Auto-generated catch block
e2.printStackTrace();
//     read the stringbuffer into bytes
byte[] l_byteData = null;
try {
l_byteData = l_strXmlFile.toString().getBytes("UTF-8");
} catch (UnsupportedEncodingException e) {
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(),
false);
//     Create a web resource and set the value of the
//     context variable "IFrameData" to it's URL
IWDCachedWebResource l_File =
WDWebResource.getWebResource(
l_byteData,
WDWebResourceType.HTML);
try {
wdContext.currentContextElement().setIFrameData(
l_File.getURL());
} catch (WDURLException e1) {
wdComponentAPI.getMessageManager().reportException(
e1.getLocalizedMessage(),
false);
Reagards,
H.V.Swathi

Set Field Focus After Data Entry Error

In a form created in Acrobat XI Pro (and distrubuted via Forms Central), I have various form fields (text, date, etc.). When the user performs a data entry error (e.g. incorrect date format based on date mask, etc.), the field focus is lost. The user must mouse-click into the field to set the field focus and re-enter their data. Is there any code that allows the app to return an error and set the focus back on the field returnign the error? Thanks / Todd

If you converted the PDF to a FormsCentral form then it's a FC issue, not a PDF issue...

IE 7 throws a no data set error

Similar Messages

Maybe you are looking for