IE Display Problem - v2 Upgrade

<p>Have just upgraded HTML DB from v1.6 to v2.0 and whilst the login pages (both normal and admin interfaces) seem to look fine when requested, clicking on the login button doesn't do anything. </p>
<p>Also, IE 6 (unfortunately I can't install other browsers to test) shows a warning icon in the bottom left and a message the problems with the page may stop it displaying or functioning correctly. It references an 'object expected' error at char 1 on line 55 (copied below).</p>
<div style="float:right;"> <input type="button" onclick="javascript:doSubmit('LOGIN_BUTTON')" value="Login" class="htmldbButton" /><img src="/i/htmldb/builder/1px_trans.gif" alt="" height="1" width="5" /></div></td>
<p>Has anyone experienced a similar problem? I've looked at the archives for this forum but haven't seen anything along these lines.</p>
Regards,
Matt
Message was edited by:
Tintax

<p>Have just upgraded HTML DB from v1.6 to v2.0 and whilst the login pages (both normal and admin interfaces) seem to look fine when requested, clicking on the login button doesn't do anything. </p>
<p>Also, IE 6 (unfortunately I can't install other browsers to test) shows a warning icon in the bottom left and a message the problems with the page may stop it displaying or functioning correctly. It references an 'object expected' error at char 1 on line 55 (copied below). </p>
<input type="button" onclick="javascript:doSubmit('LOGIN_BUTTON')" value="Login" class="htmldbButton" /></td>
<p>Has anyone experienced a similar problem? I've looked at the archives for this forum but haven't seen anything along these lines. Regards, Matt</p>

Similar Messages

Display problem after upgrading MacBook Pro to Snow Leopard

Immediately after upgrading my MacBook Pro to Snow Leopard OSX, the display has been exhibiting vertical gray 'banding' extending up from the bottom of the display. Each band is about 1 inch wide. The display seems dimmer as well, and I can't brighten it up.
I'm in the process of upgrading to Lion (Snow Leopard was the intermediate step) and am hoping that resolves the problem. Any advice/suggestions?

I do not have answers for you, but I'll be waiting to see if someone has a "fix" for this. I am running snow leopard on a MacBook Pro, and I have a dim screen problem that doesn't brighten also. (no lines in mine, though)

USB Speaker/LED Cinema Display Problems After Upgrade to Mavericks

I just upgraded to Mavericks this morning. My set-up includes a new (Late 2013) 27" iMac and a 27" Apple LED Cinema Display, with the mini display port and USB connected from the display to the iMac.
I have a set of Bose USB speakers that I had plugged into the USB port on the Cinema Display for audio. I didn't want to waste one of the USB 3 ports on the iMac so instead was using a USB 2 port on the Cinema Display. This worked fine before upgrading to Mavericks.
Now with Mavericks installed, if I have the speakers plugged in, I get a tone that sounds like very loud feedback. If I plug the USB speakers into one of the USB 3 ports on the iMac however, it works fine.
Does anyone know if this is a known issue with Mavericks? I've read some other posts about display issues, but they were referencing USB displays. In this case the display is connected via mini displayport, but the USB connection on the display seems to be causing issues.
Anyone else experienced this?

I've been experiencing additional issues with USB speakers. I plugged them into a USB port on the iMac itself (as opposed to the LED Cinema Display) and the feedback was gone. However, now I get situations where the audio appears to randomly "die" on the system. If I go into Audio preferences and switch the audio output to the internal speakers, the audio comes back on. If I then switch it back to the USB speakers, it continues to work until it randomly dies again. This happens typically 3-5 times a day.
If I just use the internal speakers as the audio output, I don't get any issues with losing the audio. The USB speakers worked fine on the iMac before upgrading to Mavericks, and still work fine on my late 2011 MBP still running 10.8.5.
I've read about other similar issues (http://www.imore.com/losing-audio-os-x-mavericks-heres-what-you-can-do-about-it). Still waiting for a fix.

Display problem since upgrading to Mavericks on my Macbook pro

I have an early 2011 Macbook Pro 13" and I have just upgraded to Mavericks and since I have the screen has not been right
Inconsistency across the screen with purple flickering
Any idea how I can fix this
It works fine but not ideal as this is my portable Photography Mac

I would take it in for diagnosis. The problem is probably not related to OS X 10.9.
Barry

Graphics display problem after upgrade of HTML DB from 1.5 to 1.6

I recently installed HTML DB version 1.5 from Companion CD and tested and everything seemed to work. I immediatley applied the 1.6 version upgrade but now no graphics are shown on the HTML DB ADMIN page. I checked the files from the upgrade $ORACLE_HOME/Patch/htmldb/images and the $ORACLE_HOME/CCD/marvel/images and verified the Alias in $ORACLE_HOME/CCD/Apache/modplsql/conf/marvel.conf. Do I need to look elsewhere for the images?
Phil Padgett
[email protected]

If that's the case then they made a mistake. If there's not a specific forum for HTMLDB, you could try one of the database groups because I think it ships with the database.
Regards,
Robin Zimmermann

Display problem after RAM Upgrade to MS6712

Hi there,
after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

OK, here's the info on my PSU;
It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

Why display hanging and software problem when upgraded to ios 8

Why display hanging and software problem when upgraded to ios 8

Hi Redhazel,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're experiencing a poor image quality with your iPhone's camera, please follow the troubleshooting below.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
iPhone: Hardware troubleshooting
Cheers,
Alex H.

MacBook Pro 13" (2011 late). second display problem after update

Updated to mountain lion this second and there is no signal out (thunderbolt to displayport cable) since ive upgraded. in lion there are no problems. does your external display work after upgrade to mountain lion?
(monitor HP ZR24w)

Does your Macbook Flash Blue at all? I have the same thing, and it won't even flash blue

Anyone with eye strain problem after upgrading to Yosemite please report feedback to Apple

As this eye strain problem is getting worse and basically I love some new Yosemite features, so please let Apple knows if this new upgrade have some display problems. I am using iMac 27" late 2013. this eye strain problem doesn't occur when using Mavericks (my mac is dual boot Maverick <-> Yosemite)
https://www.apple.com/feedback/
Thanks in advance.

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept it and the other iLife/iWork applications into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116660)

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Windows 7 64 bit on iMac display problems and instability

I received my iMac 27" quad core with 8 gig ram & 2 x 1 TB hard drives last Friday. I'm using Boot Camp to run windows 7 64 bit on maximum 2560 x 1440 screen resolution.
I get intermittent but often display problems in windows 7. I get areas of the screen covered in little yellow dots or blue squares (never red artefacts.) This will happen at random areas of the screen, inside an open window, around borders of windows and so on. Most often the screen will go black and come back with a message in the bottom right corner of the screen saying 'Display driver has stopped responding and has recovered' with the sub message saying 'display driver ATI radeon family stopped....etc'. Sometimes I lose the screen wallpaper. Once I've had the system just shut down, once I've had Photoshop seize up and I had to do a cold reboot. Could this be an overheating problem or resolution too high problem or driver problem? Windows 7 tells me my drivers are up to date. I tried installing the drivers for the card from ATI's website which made no difference
The reason I bought a Mac is because it's the only effective way to code for the Mac family of OS's in XCode. The reason I didn't just attach a miniMac to my PC monitor was because there's rather a lot of advertising by Apple about the fact that you can use a Mac with a PC OS via Apple's own Boot Camp. Now I have a lot of Windows software (some of which is not available for the Mac or requires buying again) sitting on an unstable system. Any ideas would be much appreciated...

Sorry, that thread got moved for edit and as a user tip... which I didn't want and won't be doing....
Here is the post:
A tip and workaround for how to get ATI mobility/laptop drivers so that Windows no longer thinks the ATI is a desktop card:
http://discussions.apple.com/thread.jspa?messageID=11286987
Summary (my own edit steps):
1. Install Boot Camp 3.0 and upgrade to 3.1
2. Uninstall graphic drivers and run Driver Sweeper
http://www.guru3d.com/category/driversweeper/
instead of:
removing the crashing driver by going into windows 7 setup via its install cd and deleting the ati driver manaully
3. Install ATI Mobility (link)
4. Uninstall ATI (Programs control panel?) Device Manager (rollback; uninstall?)
5. Device Nanager: update driver and BROWSE BACK to 8.681 (the original apple driver that was causing freezes and purple artifacts) - navigate to /Apple/Drivers/ATI
(Apple uses) a 4850 card in the iMac, its modified a bit for apple. Enough that desktop drivers don't work, and modded-for-laptop desktop drivers don't work either.
Now the upshot of using modified drivers is that it FORCES the catalyst control panel to be installed, meaning you get a few more options to mess around with the card.
I couldn't use the original apple drive, it locks up, the newer one had banding, the newer radeon drivers direct form ATI wouldn't work until they were modded and then they cause black screens.
SO the solution, as obscure as it was, was to download ACTUAL mobility Radeon drivers - version 10.3 still, but made for laptops.
http://support.amd.com/us/gpudownload/Pages/index.aspx
THESE drivers I was able to install - and here is where things changed.
THIS driver changed they way windows saw the video card in device manager.
As I mentioned before, its NOT a desktop card, its a modified laptop card, but installing mac drivers makes windows THINK its a full desktop card, and running the original 8.681 driver crashed it.
Once installed 10.3 LAPTOP driver it now appeared in device manager as a MOBILITY card.
+These Steps "should" work:+
delete ATI driver manually
reinstall apple driver after that and see if that works,
otherwise try the steps above
(mod drivers, remove via windows recovery off setup disk, install laptop drivers, reinstall apple driver over it)

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

HT5313 Second Display Problem after Update v10.7.5

I just updated my MacBook Pro (Late 2011) and the new OS 10.7.5 is not recognizing my second display (VGA connected emachines 19''). I have restarted, changed the resolution, and tried many things, but the display that was working perfectly two hours ago now does not work. Help pls

Hi There,
I suggested the solution on the link you refer (to solve this type of problem with gfxCardStatus)... unfortunately this solution did not solve the problem when upgrading to the 10.7.5, namely the new "supplemental update" that was released on the 4th of October (http://support.apple.com/kb/DL1599).
Here is a simple procedure I followed and solved the problem for me... this worked by chance after starting following the instructions in: https://discussions.apple.com/message/19979833#19979833.
Restart your machine and, when the machine is in booting press "alt" (left option) to show a booting menu.
Select "recovery mode" (do this with the external display connected)
In the recovery mode you can test if the external display is detected (it should work normally)
Do not do anything in the recovery mode... simply Restart you machine (now in normal mode)
It should work normally now... (at least it worked for me)
I think this has to do with a kind of "reset" on the external displays configurations... But I still do not fully understand why this happened.
I hope this helps some people! Cheers!

Ideacentre B320 display problem

I'm suffering from a display problem, and cannot figure if it's a software or hardware issue... I'm on Win7 64bit. Here are the symptoms:
1) For a while now, intermittently the screen would go grey (or some sort of a messed up pattern of rgb pixels) and I would have to power down forcefully. The frequency of this has gone up very much in the recent weeks
2) When the machine freezes, I can still hear the music playing, and Windows continues to do whatever it was doing before
3) Recently (I'm guessing after a Windows update), I wasn't able to boot into normal mode anymore. It would show the Windows splash screen, then before the login screen appears it would just go black and freeze. Leaving it for a long time doesn't lead to recovery
4) To try and fix this, I've updated the ATI driver to the latest version, which didn't work so progressively tried every version between the11.6 and 10.3 (4?) which was the default when the machine was purchased. No luck there. I've also flashed the bios and that didn't help either
5) I can boot into safe mode, so I disabled amdkmdap using sysinternal's autoruns.exe, which meant that I can boot into normal mode, but it woud fall back onto Windows' vga driver (1400x1050 only!)
6) Now, even in the low res mode, almost daily the grey screen freezing would happen and I would have to reboot. Tapping the power button allows the shutdown dialog to come up (I'm guessing), and pressing enter would shut down the machine then.
There's an awful lot of posts on the internet regarding people having issues with ATI HD6450 and similar category cards, some of which sound similar to my case. They too experienced the freezing problem and reverting or upgrading the drivers had no effect (many even reinstalled windows completely). It sounds like though, the problem is software in origin at a guess.
On the other hand, the machine is now 3-4 years old and I could imagine that the GPU or graphics memory might have suffered wear and tear -- emailing Lenovo support took a week to get a response, the only thing they asked was whether my warranty is still active (after that it's been a complete silence) are they usually this terrible?
The last thing is, when the problem first occurred I booted using a linux live CD and it was all fine, at full resolution graphics. I haven't repeated this experiment since it takes quite a while to boot from a CD... but suggested that the hardware is intact. In fact, by messing about with the drivers I was able to boot into Windows normal mode and operate for 1-2 days, after which the grey freeze happened again. I haven't been able to get back into that since.
Here is my question: Is there a way to find out whether it's software or hardware that's at fault? If it turns out to be hardware, what are my options at replacements? The GPU is soldered onto the motherboard, so do I have to replace the whole thing? If it's a software issue, would restoring to factory default state fix this issue, given that an unknown update could cause the same issue at any time... This is the last time I will buy an AIO without removable everything.

Welcome to the Lenovo Community !
Probably a good test of the hardware is use the Linux Live CD that you used earlier. If the graphics are still good when using the Live CD then your monitor and GPU are fine.
If the hardware checks out Ok then I suspect you have a driver problem. Try using a driver cleaner to fully uninstall the ATI driver since bit and pieces left over from previous driver installs can cause problems. The link below is for a free and highly recommended utility for cleaning the system of the graphic drivers. After the clean up I would try installing the original driver that came with your system.
http://www.guru3d.com/content-page/guru3d-driver-sweeper.html
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

IE Display Problem - v2 Upgrade

Similar Messages

Maybe you are looking for