IE issue with fieldset legend

Is there a remedy for a fieldset's legend not showing in IE8? Or any IE for that matter?
Shows fine in FF, Opera, Safari, Chrome but not in IE...just gone.

Jen,
My name is Jeff Canepa. I work at Adobe as a Software Quality Engineer. I am unable to reproduce the problem you describe. Would it be possible for you to add me as a Co-Author ([email protected]) of your form so I can take a look at it's design? If you are not comfortable with this then perhaps you could export the design template file (FCDT) and email it to me? In addition, any more information you might be able to provide regarding the systems of those that are getting the error would be helpful (OS version, PC/Tablet, file they tried to upload).
Regards,
Jeff Canepa
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

Similar Messages

To Creative: Audigy LS has major issues with Tomb Raider Lege

Hi,
I tried playing Tomb Raider Legend and turns out
that the Audigy LS card can't play audio properly in this game..
The sounds cracks, booms, buzzes and produces hiss etc.
Honestly it makes my ears bleed if I listen to it for too long.
At first I thought this was only a problem with my card, since I didn't
find anything related to this issue here at creative boards, but turns out
many other forums (several French and German boards)
got ppl complaining about this problem.
Also the 24-bit Li've! card seems to have issues with TR:Legend so that makes me think
the drivers are inadequate since both of these cards share same drivers.
AC97 works for now, but changing back and forth between audigy card and
on-board AC97 is quite tedious process to do just to play this one game.
Dear Creative team,
please respond and introduce a fix to this problem.Message Edited by Anvirol on 04-07-2006 07:06 PM

Squeal Of Death does occur in Tomb Raider Legend. I've finished the game and it happened to me 3 times forcing me to reboot the computer. It even occured while I was in the menu.
But this is not uncommon for my computer though. I used to have many probs with my audigy2 zs while playing games like wow, mohpa and especially bf2.
The point is Squeal of death DOES occur to X-Fi models also, which I currently own after selling my audigy2 zs. Bf2 doesn't lock up anymore (at least for now) and I thought that the problem was gone until I played Tomb Raider Legend.
So if u ask me creative cards are to blame for the prob but only partly though. The squeal and lock up of the pc used to occur more often when I had audigy2 zs. Now it only occurs in TR Legend-for the time being. And of course bf giving away my old card I had tried all possible sollutions.
My specs are
Athlon64 3000+
MSI K8N2 Platinum
2*52 Kingston value Ram
2*80GB Seagate Raid 0
Creative XFi Extreme Music
2 Optical Dri'ves
Modem
Nothing is o/c and all pci slots are taken-no conflicts.Message Edited by forwardS on 04-5-2006 07:02 AM

Issue with lag on skype and Leauge of Legends

I've called tech support 5 times, 3 times they have hung up on me and this has been a on going issue for 3 weeks now.
On Skype, Dolby Axon and League of Legends I have been getting an excessive amount of lag (ping of 300 - 1200 in spikes). They asked if I want to pay to have a tech come out to my house but I'm not about to pay someone $40/hr to come over and do everything I did.
How could I fix this issue? (the first 6 pictures are pings to google.com, the last is to leagueoflegends.com)

I had the guy come out, he replaced the modem and all, still I drop packets and get ping spike up to 1200 on na.leagueoflegends.com Edit:Its worse now. I lose my connection 100% now about every 5 minutes...I didn't have this issue with verizon FIOS, TDS, or any other ISP.

How to group Page Items with fieldset and legend HTML tags ?

I have 7 Page Items (i.e. select list, input text....) defined in Side Bar Region of my Page Zero,
for clarity I would like to group these items as follows:
1) <fieldset>
<legend>Costs</legend>
<input ..... item1 >
<input .... item2 >
<input..... item3 >
</fieldset>
1) <fieldset>
<legend>Technical Attributes</legend>
<input ..... item4 >
<input .... item5 >
<input..... item6 >
<input..... item7 >
</fieldset>
I appreciate if you can tip me with a URL link or codes examples i.e. javascript, Side Bar template #BODY# customization.
Thanks for your tips.

What if you need to access more than one data source?
          <sql:query var="myQuery" dataSource="myDataSource">
          </sql:query>
          <sql:query var="myOtherQuery" dataSource="myOtherDataSource">
          </sql:query>
          If you specify one data source as the default, how do you access the other
          one?
          -- Craig
          "thanh nguyen" <[email protected]> wrote in message
          news:3fa18529$[email protected]..
          > I believe you can set up a default datasource for the application context
          in the web.xml and weblogic.xml. That way, on your JSP, you will not need to
          set the datasource. The connection pool will handle all of that for you.
          >
          > 1. modified weblogic.xml
          > <reference-descriptor>
          > <resource-description>
          > <res-ref-name>jdbc/hr</res-ref-name>
          > <jndi-name>jdbc/hr</jndi-name>
          > </resource-description>
          > </reference-descriptor>
          > 2. modified web.xml
          > <context-param>
          > <param-name>javax.servlet.jsp.jstl.sql.dataSource</param-name>
          > <param-value>jdbc/hr</param-value>
          > </context-param>
          >
          > <resource-ref>
          > <res-ref-name>jdbc/hr</res-ref-name>
          > <res-type>javax.sql.DataSource</res-type>
          > <res-auth>CONTAINER</res-auth>
          > </resource-ref>
          > 3. redeploy app

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Unable to log into iMessage and intermittent issues with FaceTime

Late 2011 MacBook Pro, OS X 10.8.4. I'm an admin level Windows guy but a relatively new (and otherwise very pleased) convert to Mac OS.
This morning Messages started repeatedly prompting me for my iMessage password and FaceTime has starting working only intermittently. Both work fine from my iPad and iPhone 5. Both have been working from my MacBook Pro for months.
This morning when I tried to fire up Messages on the MacBook I got an error saying "The server encountered an error processing registration". After doing some Googling, I noticed that many folks said that when they had this problem they also had an issue with FaceTime. I confirmed that FaceTime was indeed giving me the same error as iMessage. After trying some solutions from past threads that didn't work, I rebooted. Now instead of throwing an error, Messages just keeps asking me for my iMessage password again and again. FaceTime works occasionally but sometimes when I get a call and click answer, I get "call failed" as my iPhone and iPad continue to ring and then I'm asked to re-enter my password on the MacBook. If I enter my password it just sits and spins. If i quit FaceTime and start it again, it'll usually log in successfully but calls may or may not work (following the same pattern I just mentioned).
The odd thing to me is that when I tested FaceTime on my iPad, I got notifications on my iPad and iPhone and my primary and alternate email address were now registered with FaceTime. They have been for over a year so I'm not sure why I'm getting those notifications again.
I'm able to log into the Mac App store without a problem using the same AppleID
What I've tried so far based on Google results:
1. In Keychain Access, reset my default keychain - No improvement
2. In Keychain Access, selected Keychain First Aid, repaired and verified - No improvement
3. On my iPad, turned iMessage off and back on - No improvement, though iMessage on the iPad still works fine
4. Confirmed that my primary and secondary AppleID email addresses and password are correct. The email address associated with my AppleID is not associated with any other AppleIDs.
Thanks!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

OBIEE 11g Map View - Issue with Label Translation

Hi All,
I have a strange translation issue with the Maps in 11g.
Created in English language to plot the Revenue for each of the Postal Codes.
I selected Postal Code and Revenue Amount in the Criteria and created a new Map View. It had the text 'Postal Code' in the Map Legend and then the scale for revenue amount.
Now I logged on with Chinese Language , it still appears as 'Postal Code' in English where in it was actually supposed to show it in Chinese.
We have a translation pack to get all the column names translated. If I try creating a new table view, it shows the translated text instead of 'Postal Code', but some how this doesn't work with Maps.
Has anyone faced similar issues ? Is there a workaround for this ?
Thanks for any pointers.

Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks!

Connectivity Issue with FIOS

Hey all,
Has anyone in the Tampa, FL 33629 area had connectivity issues with their FIOS services? My current setup is a Motorola modem that is plugged into a D-Link Router that was provided by VZ. At the D-Link located outside of the house the connectivity light is flashing red and according to the legend it indicates that it has passed the test but is having communication issues. This has been occurring over the past few weeks. The first call to customer service, after diagnostics where run and the outside unit was unplugged and battery were removed as well as all modems and routers being reset, the service rep scheduled a tech to come out. The next morning it seemed like everything was back to normal. Since then we have had intermittent service and I am currently without phone and Internet access (bundled the phone, TV, and Internet) for a couple of days due to their internal service report and dispatching system being unavailable. Just curious if anyone else has encounter this issue.
Thanks,
JB

Message Edited by CPUGuy on 05-04-2009 06:23 AM

Is there an issue with IOS8 and bluetooth connectivity?

I have downloaded IOS8 on my iPhone 5S & 4S, and now am not able to use the bluetooth phone connection in my auto.
Anyone experiencing this same situation?
j.v.fromnc

Does Apple respond to the Support Forum posts?
Is there a pending solution, and what is the timeline? Should I be raising my issues with Acura or Plantronics? I have read that RESET of the phone is a temporary solution. I am not going to reset my phone on a daily basis. The whole reason for iCloud backups is so I don't have to start over with each new device.
I have a business trip this week, and I use my car bluetooth and bluetooth headset heavily. Today I convinced a Best Buy Geek Squad employee to perform a little experiment with my iPhone 6 and iOS8.0.2. We did not try the Plantronic Voyager Legend, because it is my current headset, and does not work. We tried the Bose Series 2 (clearly price does not help compatibility), which did not work. We also tried a Jawbone Era and a $29 something, all without success.
8.0.2 worked until my phone battery died on Saturday.
Even if there are a variety of industry standards for Bluetooth technology, it is unreasonable that Apple excludes such a large percentage of the users market. I know Apple likes a good secret, but could they share enough information with the accessory market?
Why doesn't Apple aim to provide the world most stable operating system, instead of the most changing? I am all for change and innovation. I will even continue to pre-order the latest and greatest Apple product. But change without function or at a loss of function is ridiculous. I had this same experience with the iOS 7 release. I am sure that most of my issues will be resolved by Thanksgiving. Why not rewrite operating systems on a two year cycle, so you can actually test it first? I would appreciate if Apple stopped testing their products on the customers that are the most supportive.
PS This is not the only issue I have found (horizontal keyboard, apps sticking, etc, etc) This is just the issue that is effecting me most directly today. Apple you reputation is suffering. I think I just heard Steve Jobs turn over.

Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

Hi,
I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
The IIS Log on the reverse proxy showed:
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
After I installed a fix for ARR
http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

Hi,
This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end.
Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing
<h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
When the client was trying to retrieve from the webticketservice.svc
2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
Request Id: 0x72cfc18
HttpHeader:Content-Length 1477
HttpHeader:Content-Type text/html
HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 502
Installed the HotFix from here:-
Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both.
I hope this helps others as I was losing the plot :-)
Cheers
Sam

Issue with Attendance Overview Graphic

Please, kindly help our colleague.
Issue:
In MSS -> Attendance Overview
In the graphic, for "Open request", shows colour BLUE however in the legend shows colour PINK.

Hello Siddharth
Thanks for reply.
I checked the notes, first two are valid if the graph is not displayed at all. The last note discusses the problem with Team Calendar.
We are facing the issue with Attendance Overview. The graph is getting displayed. But instead of pink color (for open leave requests), dark blue color gets displayed, with dark black lines around it.
If there are no open requests, graph gets displayed correctly. Please suggest the solution.
Regards,
Vinod

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

Issue with magsafe/charging (blinks green, amber, off)

Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!

Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

IE issue with fieldset legend

Similar Messages

Maybe you are looking for