If an iPad 2 and iPod touch are both on ios6, why can videos be watched in Facebook on one and not the other?

Flash seems to be at issue here but it doesn't make sense, they are both on same ios

Sometimes what I've experienced is that my iPad can access the regular site of a web page, if the site has a mobile version, my touch will default to the mobile version, where things may be optimized for iDevices.
Try looking up in the address bar of the site in question and see if there's a www.m. in the address.
Some of them I literally can't get the regular site on my Touch, mobile site only.

Similar Messages

  • I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

    I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
    Thank you!

    Oh, also want to add that the PC I'm currently using is:
    Windows Vista Home Premium Service Pack 2
    My other PC was:
    Windows 7 Ultimate
    My MacBook is:
    Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
    Not sure if this stuff is important, but I thought I'd add it.

  • I have 2 iPod touchs and 1 computer. It will reconize one but not the other. How do I get it to sync music on both

    I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    i have an 8GB ipod touch and suddenly I'm able to access only the "sent" mailbox of Mail and not the other mailboxes.  I turned on and off.  I connected it to MacBook but still I can't access the other mailboxes.

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Can you access the mail on another device?

  • How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

    How can I transfer photos from an IPhone 5 to an IPad 2 using a cable.  I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

    The devices are not designed for transfer of that kind.  Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

  • When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

    when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

    What is the Other on my iPhone and How to Remove It
    An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

    I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

    It does make sense.  The iPhone is a one-person device and just syncs to one computer.
    The way it should work is as follows:
    Old computer content ---> New computer
    New computer <---> syncs to iPhone
    But the way you are trying to operate sounds like:
    Old computer content ---> iPhone
    ... and ...
    New computer content <---> iPhone
    So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

  • HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?

    How do I set up icloud on 2 ipads? It recognises one but not the other one.

    Hi Leora Beisly,
    Thanks for visiting Apple Support Communities.
    Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Next, see this page for iCloud setup instructions:
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
    You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
    Important: Be sure to use the same Apple ID when you set up iCloud on each device.
    Best Regards,
    Jeremy

  • I have 2 iPads, I can only download some apps to one device not the other one?

    I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
    Thanks

    1. Make sure iPad is using the latest software
    2. Settings>General>Date and Time>Set Automatically>On
    3. Make sure Time Zone is correct
    4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

  • Why can one mac access the internet and not the other?

    Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
    Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
    Tech details:
    Airport Express 2nd generation (just purchased) model 1392
    Macbook Pro running 10.8.2
    MacBook Air running 10.6.8

    It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
    I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
    Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

  • I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
    Then File menu > Browse in Bridge will bring up Bridge CS6.
    If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
    I hope that's the answer you were looking for.
    Gene

  • Why can't I save Tab Groups from one session to the next? When I restart, tab groups are cleared.

    Why can't I save Tab Groups from one session to the next? Is there a way to save Tab Groups from the last session to the next time I start up?
    Mark Kipperman

    Yeah, if this is the way it's supposed to work its a useless and, dare I say, stupid "feature". Wouldn't the whole point of this be to have quick access to groups of pages. If I have to select them each time to create the group what is it doing for me?

  • Why packets are being translated by one route-map and not the other?

    Hi,
    I have 2 NAT rules, each with a route-map to determine which packets are translated. What I don't understand is how to control which NAT rule is applied first..?
    In my config, the first of the following rules is applied first, and then the other. I would like to have it the other way round, the second being applied first, and the first being applied second.
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    The reason why I want it this way round is because the first rule NAT's almost everything so that I can access the Internet. The second rule NAT's specific traffic to a different address.
    If I want traffic to be NATTED according to the second rule, I have to deny traffic in the first associated ACL, and permit it in the second ACL. That means I basically have to configure each ACL each time I want packets to be matched by the second NAT rule - there must be a better way of doing it!!!
    Any help would be most appreciated.
    Many thanks,
    Michael.

    Hello, here's the basic (shortened list). If I want packets to be matched by NAT_RADIANZ_PIXACCESS_ACL I have to put a deny in NAT_INTERNET_ACCESS_ACL. If I could make sure that the first list is used first, and then anything left over compared against the second, then it would make life/editing much easier...
    Cheers,
    Michael
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static udp 10.10.11.1 500 10.10.11.1 500 extendable
    ip nat inside source static udp 10.10.11.1 4500 10.10.11.1 4500 extendable
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    ip access-list extended NAT_INTERNET_ACCESS_ACL
    remark Traffic to Branch A (over VPN)
    deny ip 172.16.101.0 0.0.0.255 192.168.1.0 0.0.0.255
    remark Traffic to Branch B (over VPN)
    deny ip 172.16.101.0 0.0.0.255 172.16.0.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.1.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.2.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.3.0 0.0.0.255
    remark Traffic to Cust A (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.1
    deny ip host 172.16.101.2 host 192.168.0.1
    remark Traffic to Cust B (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.2
    deny ip host 172.16.101.2 host 192.168.0.2
    remark Traffic to Cust C (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.3
    deny ip host 172.16.101.2 host 192.168.0.3
    remark Traffic to Cust D (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.4
    deny ip host 172.16.101.2 host 192.168.0.4
    permit ip any any
    ip access-list extended NAT_RADIANZ_PIXACCESS_ACL
    remark Manangement Traffic to Cust C
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    remark Manangement Traffic to Cust D
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    route-map NAT_RADIANZ_PIXACCESS_RMAP permit 10
    match ip address NAT_RADIANZ_PIXACCESS_ACL
    set ip next-hop 10.10.11.14
    route-map NAT_INTERNET_ACCESS_RMAP permit 40
    match ip address NAT_INTERNET_ACCESS_ACL
    set ip next-hop xxx.xxx.xxx.xxx

  • PDF email only sends the top page and not the others

    I have created a real estate brochure in  Pages. I have tried to email it as a PDF. When it arrives at its destination there is only one page and not the three which are in the brochure. Why is this? I sent this in Pages format I have all the surrounding editing paraphernalia. It does not look very professional

    Are you sure this is what is happening?
    Only the top page is shown in the eMail. Save the pdf or double click on it so it open in Preview or Acrobat Reader and you should see all the pages.
    If you want people to see multiple pages in the email, split the .pdf up into individual pages, then add them to the eMail.
    Peter

Maybe you are looking for

  • HP Laserjet 1320 not printing PDF files

    I can't print PDF or JPG files from my MacBook Pro to my HP Laserjet 1320, connected on USB. MS Word files are printing fine and so are Test Print commands. This has morphed today from an earlier problem a few days where only the 1st page of PDF docu

  • Elements dropping off my files when printed from a PDF

    Please can anyone help... I am running InDesign CS1, I have recently designed a leaflet which included dotted lines for answers to questions. To make the dotted lines I used the full stop button (rather than the dotted line option on the line tool).

  • I can not install the new version of lightroom cc

    I'm trying to update lightroom lightroom 5 cc new version through adobe creative cloud and only gives me the otion to install. When I run install adobe creative cloud tells me that is installed but can not find this version on my computer and still v

  • Does flex/actionscript support SOAP MTOM?

    as titled.

  • Can ssh to my home MBP from work, but cannot make outbound connections

    Details: I have a MBP with a wired ethernet connection on my home network, and a 24/7 file server that I can access via SSH from outside my firewall, so I can ssh to my fileserver, then ssh to my MBP from it: (I use a python script on the fileserver