If I bring up fire fox and not connected to internet I get and error when I shut it down and connect to the internet and bring firefox up it will not open unless I remove the prosses in task manager is this normal
when shuting down Firefox after not being connected to the internet the processes remains and I have to go into task manager and remove the process manually or I get a message that Firefox is already started and it will not come up
Sofar I have found (off internet),
A)that if you go into sleep mode, the wifi shuts down or powers down.
B)sleep mode must be disabled in order for wifi to continue.
C)you can check this by going into wifi and seeing the iphone every 20 seconds or so looking.
D)as far as handoff ,I still not to sure but I think BOOTH units must overlap each other in order to handoff from 1 to the other.
Show much bs on the web that I have to filter the pages and there not enough time in the day to go thru it all.
Similar Messages
-
The above message pops up when I try to install the new version of firefox. It will not let me install the new version. I do not know how to fix it. Please advise.
Try a custom install.
*https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows -
I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
With the old version, all I had to do was go to the log in page to any of my email accounts or membership sites and scan my finger. It would fill in the fields and open my account. I like this new version of Firefox, but if I am not able to use that password manager then I will have to install the older version.
A 2008 black MacBook can run OS X Lion (OS X 10.7). However, if you want to use that Mac for apps that do not work with the new MacBook, I recommend you to leave it with Mac OS X 10.6.8, because OS X Lion removes compatibility with PowerPC apps.
Do not worry about the battery of the new MacBook Pro. You can replace it yourself or take it to an Apple Store or reseller, and the cost is similar. However, it's important to take the Mac to an Apple Store or reseller if your Mac's battery fails while the Mac is in warranty, because you will get the battery replaced for free. -
The new version of Firefox, 18.02, will not load any pages. Why not?
I attempted to open Firefox and was told it would load when the updates were applied, which was nothing new. It loaded fine and there were no incompatible add-ons, but it will not load any web pages. I'm on the same computer using Chrome to send this message. Everything was working fine in release 18.01.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Hello,
I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities. Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format. Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction. I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
Drag the Yellow (or variable drag box) to the drag target.
Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
Move both draggable boxes to the drag target and use the undo and reset buttons...
Anyhow, I know you all are sharp and will run the demo through its paces.
I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request - save the darn "undefined" message that comes up!
Many thanks in advance for any help and/or direction that you all may be able to provide,
PaulHello,
I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
I did go ahead and submit this to Adobe as a possible bug today.
Thanks again for any help related to this issue. If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks!
Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
~ Paul -
I replaced my hard drive due to my old one failing.
When I use Internet Recovery, it gives me the option to reinstall Mavericks. Then an error occurs when it tries to verify, and asks me to try again.
Are my options just to reinstall from a CD?Do you have your original installation disc(s)? If so, I would boot from Disc 1 (the bootable installation disc), format the drive using Disk Utility (Mac OS Extended (Journaled) with a single GUID partition) and install the OS that came with your machine.
This may sound like a silly question, but have you formatted the hard drive with Disk Utility before you've tried to install Mavericks under Internet Recovery?
Clinton -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.
I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier... -
When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?
I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.
-
I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work with MY photos?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)Open Containing Folders is never active.
-
Images (actually graphics) loaded fine in the previous version of firefox, but now do not open in firefox 5. It is our business' website. it opens and looks fine in explorer and other browsers. However, please goto www.trinitystone.biz (using Firefox 5)and look at how the top menu bar has a black box surrounding it and the bottom menu also has this black bar. It is not supposed to be there, if you view the site from IE, you will see what it is supposed to look like. Any help would be appreciated! Thanks
You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search -
Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.
-
The mail app on my Mac laptop will not open. This began happening after an upgrade during which "Security UPdate 2012-004" was installed. My mail app has a new icon, and I think i trashed the old program (trying to follow directions). Suggest a fix?
See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
Maybe you are looking for
-
How can I remove an older version of Creative Suite while deploying Creative Suite 6
After you build an install package using the Adobe Application Manager Enterprise is there a way it can be deployed to upgrade an older version of Creative Suite. In my organization we do not need both versions and I have about 100 machines to depl
-
Most times our bpel processes cannot update a database table (logically or otherwise) immediately after it is polled,rather it may have to deferred after until a few business validations are done and depending on whether these were successful or not
-
Macbook is extremely slow, lags, and glitches, unresponsive.
My macbook is about 7 months and recently out of no where it has been freezing, being very slow, takes long to load videos etc. When I change pages the screen will freeze and become black and distorted. It is not just when I am on the internet either
-
Do not process the undelivered mails-Mail adapter
Hi Experts, In my scenario, I am using sender mail adapter. PI is successfully polling the mails and sending it to intended recipient. Now, if the mail is undelivered to recipient then a notification indicating undelivered status will come to sender
-
No Battery powerup 15" 1.67GHz
Someone at work is having issues with their PowerBook, it will power up just fine while plugged in, but stopped recognizing the battery. First thing we did was swap in a new batery we had on hand. The notebook will recognize that there is a battery p