If you write routine in transfer rules what will happen

If you write routine in transfer rules what will happen?

Hi,
If we write routines in Transfer Rules:
If it is Start Routine: Record Level Transformation
If it is at Rules: Field Level Transformation
In both case, the transformations are activated before the data entering into BW.
Hope this Information helps u..........
Assigning points is the way of saying THANKS in SDN
Regards
Ramakrishna Kamurthy

Similar Messages

Problem while writting routine in transfer rules

Hi All,
I am assigning the routine 'Fill Partner Cost center from partner objects' to the infoobject '0PART_CCTR'.
In the transfer rules I create a routine for the '0PART_CCTR' but then it prompts to select any field /infoobject. The problem is the infoobject '0PART_CCTR' is not there in the selection and if I choose all the fields then while saving it gives error.
Can anybody help me out please.
Regards,
Sushmita

check ur datasource is active or not......also if its active is it having all the fields which you want in ur routine..if not then u can't write the routine for it...
Now since ur writing transfer routine..most probably ur laoding from source system r/3 right?
So u won't have infoobject in ur source fields..u will find fields like matnr etc(source system fields name..which u have to map with infoobjects in ur transfer rule..).is it true???
Regards
RK

Urgent: ABAP routine in transfer rules

Hi,
when i am loading master data from R/3 into BW, i need to filter some records based on material type. there is no option in RSA6 (on R/3) or in Infopackage (BW) to make it available for filter.
So i assume i need to write ABAP routine in transfer rules. can some one help me with ABAP. i need to load the records only when MTART field(material type) in MARA is "FINI" or "RAW" and skip other records.
what is difference between deleting the whole data packet and deleting the record.
Thank you very much in advance
Regards
Emil

Hi
Write the below code in the start routine of your transfer rules.
Regards
Prakash
DATA: IT_DATA        TYPE STANDARD TABLE OF TRANSFER_STRUCTURE
                     WITH HEADER LINE
                     WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA: S_DATA, T_DATA TYPE TRANSFER_STRUCTURE.
LOOP AT DATAPAK INTO S_DATA.
IF S_DATA-MTART EQ 'A' OR S_DATA-MTART EQ 'B'.
MOVE S_DATA TO T_DATA.
DELETE S_DATA.
ELSE.
DELETE S_DATA.
ENDIF.
APPEND T_DATA TO IT_DATA.
ENDLOOP.
CLEAR T_DATA.
DATAPAK[] = IT_DATA[].
Assigning points is a way of saying thanks on SDN!!

Help on Start Routine at Transfer Rule.

Hi guys,
We r extracting data from generic extractor into BW.My target is to fill Attributes of 0Customer(Infoprovider) Infoobject.
We have added two navigational attributes to it CLASS A and CLASS B.
Data coming from R/3 has three fields Customer,Class,n field called as ATWRT.
For each customer there are two records .
For Ex
Customer                         Class                          ATWRT
001                                   A                                 FOOD
001                                   B                                 Supermarket
002                                   A                                 Chain
003                                   B                                  Magnum
In the target customer is key
Now the TASK is that in the target the definition for class A which is present in ATWRT should go to navigational attribute ClassA
n Defination for B should go in NAV Attribute CLASS B . that means there should be single record in the target comprising both value in NAV attribute.
For Ex
Customer                Class A                             Class B
001                         FOOD                                Supermarket
002                         Chain                                  Magnum
i want to write program in start routine of transfer rules. If u can suggest any other method also it will good to me to sort this issue. Suggestions are expected.
Points will be awarded for the write suggestion.
Pls help me out.

Dennis,
Thank you so much for the quick response.
I think it is working. I only have one concern!!!!.
I feel like during the testing I found something weird that eventhough there are only 8 records in the psa and four records only have the value ('status') that we need from customer master data-field1, it is still picking the 5th record, not sure why. I see that once it is written in to the data target then the value is showing it as 'status' and in psa it is different.
So I wonder if it is converting that field in the routine based on our constant! Please let me know your input.
p.s data target does not have the field1 available. So just like you corrected my code it has to bring it from customer master data and join customer to with the customer-field1 =' status', then pick else delete other records.
Regards,
Su

Debugging of Routines in transfer rules

Hi All,
I wrote a routine and trying to debug.I tried to debug using "Simulate update" option when we right click in the monitor screen.I don't know how to proceed from there.Could some one explains the steps to debug the routine in transfer rules?
Your help is greatly appreciated.
Thanks
Manish

Hello Manish,
You can create a Watch point if you are looking for some InfoObject / table field values.
Or you can keep pressing F5 for step by step debugging (takes long time) and double click the field when you see them.
If you want to go by block by block instead of line you can use F6 and F7 and if you want to execute you can F8 as what we do for execution.
If you are sure where you want to check then set a break point by double click or select the line and click the Break Point Icon in the top and press F8, the system will automatically stops at the break point then double click the field you need and check the value in the right side window.
If you are using BW3.x the you can switch between New Debug mode (Multiple screen and will be difficult to use if you are new) and Classical Debug Mode (easy to use)
Hope it helps
Thanks
Chandran

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
   How to find the existing Start Routines in Transfer Rules in BW System, please ?
   I know that we could find from the Transfer Rules.
   Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

Debugging: start routine in transfer rules

Hi !
can you please tell me how to debug start routines and field routines in transfer rules?
If possible please tell me too debugging of update rules.

Hi Rajib,
Go to the monitor -> Details tab -> Processing -> Choose the datapackage you want to debug -> Right click -> Simulate update -> Choose eather activate debugging in transfer rules (to debug in transfer rules) or debugging in update rules(for start routine and update rules).
You can mention the number records you want to debug also, if you have an idea of which records you want to debug you can give the number of that record.
Once the debug screen comes up, press F8...the control stops at first break point...from there you can do a step by step debugging (F5).
Hope this helps...
Regards,
Kalyan

If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?

I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id?? I heard that if i erase all data. The apple id of which i buy my iphone will appear and mine will not??

If the store setup the phone with an Apple ID/Password, that is not yours, & turned on Find My Phone, then you will need that Apple ID/Password to re-activate the phone. Called Activation Lock. Read here:
http://support.apple.com/kb/PH13695
So, go back to the store where you got this phone & have them fix things.

What will happen if you don't upgrade your ipad 2 ios5.1.1 to ios6?

hey guyz can u plz give some advice if what will happen to your ipad if you don't upgrade your ipad 2 ios5.1.1 to ios6?is there a chance to have a virus if you dont upgrade it.?tnx so much.

Whether you Upgrade or Not is your Choice...
rhpz18 wrote:
...is there a chance to have a virus if you dont upgrade it.?..
There are No Viruses for iOS at this moment in time...
So all should be Fine.

What will happen to the battery if i let my Ipod touch 4th Gen charging for 8 hours?I'm editing and fixing my ITunes in my P.C,and It's two days old.Thank you.

What will happen to the battery if i let my Ipod touch 4th Gen charging for 8 hours?I'm editing and fixing my ITunes in my P.C,and It's two days old.Thank you.

Make an appointment at the Genius Bar of an Apple store. If under warranty, as you say (the warranty is transferable) and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

When you block someone what will happen when they try calling and texting you?

I recently blocked someone they have a different phone carrier. When they text me and call me what will happen? Will they know if they got blocked?

They might get a message when calling that the call couldn't be completed. I don't know what happens when they try to text you.

MY PC WAS REFORMATTED. WHAT WILL HAPPEN WHEN I CONNECT MY IPOD TO MY PC NOW

Hi everyone!
My pc was recently formatted, and now I want to add new songs to my iPod. What will happen to the songs in my iPod when i connect it to the newly formatted PC? (not all songs in my iPod are in my PC anymore).
Is there a way I can get all my songs from my iPod to my PC? If there is a way, would the songs remain organized from the iPod to the PC? Coz I am very organized with my iTunes and iPod, every artist, genre, album title is fixed.
Would the PC automatically update my iPod? I know there is a setting in iTunes where I could choose if iTunes updates my iPod automatically or manually, but I can't seem to find it. I'm afraid to connect my iPod now to my PC because this might erase and foul up my songs in my iPod.
Thanks and please help.
Chad

If your iPod is set to update automatically you just need to take care when connecting back to your computer and an empty iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it: Managing Your Songs Manually
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Edit>Preferences>iPod and check the "Manually manage songs and playlists" box.
You can't sync or drag your music back directly from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for quite a small outlay.

What will happen when I install Leopard?

So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

Fair comment!
If you want the full nine yards:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

What will happen if I don't use apple's hdd?

My HDD is passed away.
I'm using Macbook Unibody(A1342) and I will replace the HDD.
I heard that Apple's HDD has a temperature sensor.
So that If I don't use that, it will be a problem, as I heard.
What will happen if I don't use the Apple's HDD?

The tempeture sensor is on the logic board not the hard drive. Apple doesn't make any hard drives they buy them from other manufacturers.
For a new hard drive try Newegg.com
Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE Use the list at the left for larger and faster drives.
SSD drives
http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE Use the list at the left for larger and faster drives.
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

What will happen if I delete sleepimage?

What will happen if I delete sleepimage? I've read through several posts here but I'm not clear exactly what this does and if there are some dire consequences if I delete this from my laptop to make more room on my HD. Any clarifications much appreciated!

This is a file that the contents of your computer's memory are written to when your computer goes to sleep. It will always be there, or recreated if it's missing, as long as you have a newer Intel based Mac with the new safe sleep mode.
Here's a [MacWorld article|http://www.macworld.com/article/53471/2006/10/sleepmode.html] explaining the sleepimage file.
As a general rule though, you really shouldn't be deleting files from the /private directory without knowing exactly what they are for... the directory is labelled /private for a reason

If you write routine in transfer rules what will happen

Similar Messages

Maybe you are looking for