Illustrator CS6 freezing with more than one document

I have always had multiple files open at a time when using illustrator but all day today the program has been freezing everytime i open more than one document. I am able to use the program now if i only have one file open but it freezes as soon as i open the second file. I have restarted my computer twice and i have closed every other program on my computer and none of that helped. I have a macbook pro and i save all of my illustrator files on an external hard drive. As any one else experienced this?
Thanks for the help

Have you added any Illustrator plug ins or software recently, or enabled new fonts? Try working with some other doumcnets if you have not, to help narrow down if this is a global problem affecting all documents.
Create a new user account and log in as that
Run applications /utilities/disk utility and fix permissions
Is there a common image used in these doucments, may be corrupt and sometimes opening and resaving a .psd for example

Similar Messages

I created several pdfs & saved them in adobe acrobat pro. I want to start all over & want to delete these pdfs so I am not confused with more than one document with similar titles. How do I delete the document

I am working on a big project & creating everything in word. I then am turning the documents into PDF format so they will be easy for everyone to open. I have several PDFs that are not the way I want them & want to delete them so I don't have so many documents with similar names. Is there a way to delete a pdf from my saved document?? This is probably very simple & I am over thinking it, but appreciate any help.

I was able to figure it out, & just as I thought way to simple! UGH!

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

Document/literal style wsdl with more than one port

Recently I have changed wsdl style from rpc/encoded to document/literal as BPEL does not handle soapenc:arrayType. The wsdl contains 2 operations and few complex type definitions.
In BPEL Designer I have created a process that invokes all operations defined in the wsdl, but only one of them will have some data in the response message and the other one will have an empty message. On the other hand, when I use stub generation to invoke Web Service everything is working fine.
If I provide separate wsdl for each operation (in BPEL process I would have two partnerLinks instead of one) than it works fine.
Does this mean that BPEL does not handle document/literal style endpoints with more than one port (operation)?
I have tested this with the orabpel_2.0_J1_win32.exe and orabpel_2.0rc9_win32.exe. Web Services, used for this test, are deployed in Jboss 3.2.3 and axis-1_2beta3.
WSDL used as partnerLink:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="CardId">
<sequence>
<element name="cardType" nillable="true" type="xsd:string" />
<element name="number" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<complexType name="CardIdArray">
<sequence>
<element maxOccurs="unbounded" name="item" nillable="true" type="impl:CardId" />
</sequence>
</complexType>
<element name="getCardsReturn" type="impl:CardIdArray" />
<complexType name="CardholderCards">
<sequence>
<element maxOccurs="unbounded" name="cards" nillable="true" type="impl:CardId" />
<element name="serialNumber" nillable="true" type="xsd:string" />
</sequence>
</complexType>
<element name="retrieveChReturn" type="impl:CardholderCards" />
</schema>
</wsdl:types>
<wsdl:message name="retrieveChRequest" />
<wsdl:message name="getCardsRequest" />
<wsdl:message name="retrieveChResponse">
<wsdl:part element="impl:retrieveChReturn" name="retrieveChReturn" />
</wsdl:message>
<wsdl:message name="getCardsResponse">
<wsdl:part element="impl:getCardsReturn" name="getCardsReturn" />
</wsdl:message>
<wsdl:portType name="TestService">
<wsdl:operation name="getCards">
<wsdl:input message="impl:getCardsRequest" name="getCardsRequest" />
<wsdl:output message="impl:getCardsResponse" name="getCardsResponse" />
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdl:input message="impl:retrieveChRequest" name="retrieveChRequest" />
<wsdl:output message="impl:retrieveChResponse" name="retrieveChResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServiceSoapBinding" type="impl:TestService">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCards">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="getCardsRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="getCardsResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="retrieveCh">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="retrieveChRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveChResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServiceService">
<wsdl:port binding="impl:TestServiceSoapBinding" name="TestService">
<wsdlsoap:address location="http://localhost:8080/axis/services/TestService" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi Dragana,
We definitely support the ability to call a web service that exposes two operations (document/literal or not).
Glancing through your WSDL, it looks good.
Could you please try to tunnel the second request and see 1) what data is sent to the service and 2) what data is returned by the service?
Can you please email us a reproduceable case so that we can help troubleshoot in parallel?
Thank you,
Edwin
[email protected]
please rename .zip to .zap

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Remove extended features more than one document at a time.

Does anybody know how to remove the extended features in Adobe files in batch mode? Since the newest upgrade of Adobe reader, we are having to remove the extended features and have 702 forms to do this with! Our users are trying to add their image signature and now it prompts them to do a save as and then locate the saved copy. Seems there must be an easier way or a fix for this? Thanks all.

Hi melanie1621
Yes You can upload more than one document ...
Please do the following :
1. Click on upload files button under Acrobat.com
2. A pop will open .
3. Select more than one file by keeping the CTRL button pressed.
4. Once, you select all the files , Click on Open ...
It Will Start uploading all your files ...!

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

More than one document in a Batch Input Session?

Hi to all,
I need to post more than one document with a Batch Input of MB1A transaction.
The user asked me to create only one session no mater how meny documents I've to post.
The problem is that when I run the record (SM35), when the first document is saved, the batch input finishes and the rest of de documents in the record can't be processed.
Does anyone knows if this is possible? or I've to create a new session for each document to de treated?
Thanks to all.
Nico.-

You should be able to post all documents in one session.
When you go in SM35 session, can you see multiple transactions in that session?
All transaction postings should happen within function 'BDC_OPEN_GROUP' and 'BDC_CLOSE_GROUP' in your program.
Cheers,
Vikram

Maping more than one document to calendar week

how to map more than one document date into a calender week?

Hi,
The possbilities are
1.Create a customer exit variable with processing type as replacement path with the help of abapers
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan

PRoblem when posting more than one document

Hi all,
I'm using BAPI    BAPI_GOODSMOVEMENT_CREATE to post the documents for PO_GR.when i post one document through text file it is done succesfuully. when i'm posting more than one document it is giving error "posting not possible".
My code is as follows:
loop at i_data.
concatenate '0'   i_data-stor_loc into i_data-stor_loc.
concatenate '00' i_data-plant     into i_data-plant.
    i_item-po_number = i_data-po_no.
    i_item-po_item    = i_data-po_item.
    i_item-move_type = i_data-mvt_type.
    i_head-doc_date   = doc_date.
    i_head-pstng_date = post_date.
    i_head-ref_doc_no = i_data-del_note.
    i_item-entry_qnt = i_data-entry_qty.
    i_item-stge_loc   = i_data-stor_loc.
    i_item-plant      = i_data-plant.
    i_item-stck_type = i_data-stk_type.
    i_item-batch      = i_data-batch.
I_ITEM-move_val_type      = i_data-move_batch.
    APPEND: i_item,i_head.
    CLEAR:i_item.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
   EXPORTING
     goodsmvt_header             = i_head
     goodsmvt_code               = i_code
   TESTRUN                     = ' '
IMPORTING
GOODSMVT_HEADRET            =
    MATERIALDOCUMENT            = matdoc
   MATDOCUMENTYEAR             =
   tables
     goodsmvt_item               = i_item
   GOODSMVT_SERIALNUMBER       =
     return                      = return
IF return IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
LOOP AT return.
    WRITE: return-message.
ENDLOOP.
WRITE: matdoc.
PLease specify where i'm going wrong.
Regards,
SImha.

Hi,
I had used the same FM to post multiple documents, but never faced this error.
*- Header
MOVE: sy-datum TO bapigm_head-pstng_date,
        sy-datum TO bapigm_head-doc_date,
        sy-uname TO bapigm_head-pr_uname,
        v_mblnr TO bapigm_head-ref_doc_no,
        con_bfwms_bestand TO bapigm_head-ext_wms.
*- Item
*- Populate item data
LOOP AT i_items_trans.
    CLEAR ibapigm_item.
*- Convert the matnr backto 18 char form (External)
    CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
      EXPORTING
        input            = i_items_trans-matnr
      IMPORTING
        output           = i_items_trans-matnr
      EXCEPTIONS
        number_not_found = 1
        length_error     = 2
        OTHERS           = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ibapigm_item-material   = i_items_trans-matnr.
    ibapigm_item-plant      = i_items_trans-werks.
    ibapigm_item-stge_loc   = i_items_trans-lgort.
    ibapigm_item-move_type = '101'.   "Goods Receipt
    ibapigm_item-mvt_ind    = 'B'.     "Goods Movement for PO
    ibapigm_item-po_number = i_items_trans-ebeln.
    ibapigm_item-po_item    = i_items_trans-ebelp.
    ibapigm_item-entry_qnt = i_items_trans-ktmng.
    ibapigm_item-entry_uom = i_items_trans-meins.
    APPEND ibapigm_item.
ENDLOOP.
*-Call FM
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = bapigm_head
      goodsmvt_code    = bapigm_code
    IMPORTING
      goodsmvt_headret = bapigm_headret
    TABLES
      goodsmvt_item    = ibapigm_item
      return           = ibapigm_ret.
*- Commit on Success
IF NOT bapigm_headret-mat_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Raj

Updating JournalEntries object with more than one currency fails

I'm using SBO 6.50 (exactly CEE version 7.60.014 SP:01 EF:08).
   I'm trying to update memo field of existing journal entries. Most of them works OK, but if I try to update entry with more than one currency, update fails with an error code -5002 and message:
   Transaction includes more than one currency [OCRN].
Code (in C++) is quite simple:
SAPbobsCOM::ICompanyPtr m_company = SAPbobsCOM::ICompanyPtr("SAPbobsCOM.Company");
SAPbobsCOM::IJournalEntriesPtr pEntry = m_company->GetBusinessObject(SAPbobsCOM::oJournalEntries);
long m_nId = 1;     // TransId field, any valid value
try
     if (pEntry->GetByKey(m_nId) != -1)
          return;
     pEntry->Memo = _bstr_t("Memo");;
     if (pEntry->Update() < S_OK)
          throw(0);
catch(...)
     long lError; BSTR bstrError;
     m_company->GetLastError(&lError, &bstrError);
What's wrong? Using multiple currencies in journal entry is correct, it is possible to add them manually so it should be possible to update such an "safe" field as Memo is.

Hi,
I have the same problem, but if you go to Administration->System Initialization ->Document Settings, select "Per Document", and in Document, choose "Journal Entry", by default, the options are clicked, or "Blocked", this is why in DI yoy get this message.
Try to unchecked and it will work.
HTH,
Ribeiro Santos

How do you attach/email more than one document from the pages app?

How do you send more than one document from the pages app on an iPad?

This is entirely frustrating and I have yet to find an answer for this question even though people have been asking it on the internet for over a year!
I am relatively new to apple and I was considering staying with them for my next iphone because of my apps, but after paying for this app and discovering I can't email more than one document "page" at a time? This makes no sense. Please fix this apple, I'd like to say you have replaced my tablet PC for home-office work but now I am reconsidering...

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Illustrator CS6 freezing with more than one document

Similar Messages

Maybe you are looking for