IMac G4 external drive 10.3

My iMac has a dodgy hard drive set up thing and the guy at the genius bar said it could work off an external drive via firewire.
I have a WesternDigital 500GB drive and tried to install 10.3 onto it but on the 'select disk to install' bit, there was no disk to choose from but I know it works because it comes up in the Disk Utility bit (also tells me all about the HD).
What's wrong with it?
Is drive compatible? (http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1437)

Hello Mario,
I have no such influence here. You could repost to this forum,
http://discussions.apple.com/forum.jspa?forumID=1076
which is as close as I can get to the people who run the show. They don't read this forum, but may notice your complaint in that feedback section.
It is weird that you have received more than 20 emails about this post when there have only been three replies! So they have been duplication notifications I presume.
Anyway, repost in that section and you may get 'unsubscribed'.

Similar Messages

  • Transferring files from iMac to External Drive issues. Please help

    I have a 500gb Western Digital external hard-drive. I began using it on a PC, but got a Mac a couple of months ago. There are a couple of problems that I am encountering. First of all, the folders that I had on my external drive (music, movies etc.) are all locked, and no matter what I try on the Mac, I cannot unlock them.
    That really did not cause too much of an issue, because I would just drag them onto the drive, and put them in the proper folders when I connected it to a Windows machine.
    However, recently when I try to transfer an album from the Mac to the external, I get an error message that says:
    The finder cannot complete the operation because some data in "Song/Album.mp3" could not be read or written. (error code -36)
    Basically my two questions are how do I unlock the folders on my external drive, and what is causing this error to start all of a sudden?
    Any help would be appreciated

    Open up Applications/Utilities/Disk Utility. Select your external drive on the left then under the Erase tab select MS-DOS(FAT) as your volume format. Keep in mind that re-formatting your drive will erase all of the data so make sure you have it all backed up on your computer before you re-format.
    http://ftp.georgetek.com/George/DiskUtilMS-DOS.png
    Are you replacing your PC with the iMac or are you still going to use both computers?
    George

  • Cables to connect iMac to external drive?

    Cables, cables, cables...which do I need?
    I want to transfer data from a backed have drive like this..
    ...to a new 5k iMac with connections like these in back:
    I'm not cable savvy, but would it be okay to use this connection for the transfer? The four USB connections in the back are firewire-capable, right? If not, what do I need to do?
    Thanks for your help!

    The cable you photograph and the connector on your hard drive appears to me to be one of the many different USB connections. I typically see this type of connector on a camera. The other end of your cable should be a standard USB connection. If so it will connect to one of the four ports marks with a blue number 3 in your photo.

  • Can not start INTEL iMac from external drive

    I have a backup drive that has been cloned (Carbon Copy Cloner) from my iMac hard drive.  I can not restart from it using the iMac. (I can use it to restart my Mac Air with out any problem.)  When I hold down OPTION during restart the drive does not show up.  Also if I select it from the startup option, I can choose it, but the iMac fails to find it.  I should also indicate that I have a iMac with the fusion drive.  Not sure if this is part of the problem or not.
    Any suggestions would be appreciated.

    Yes the drive is connected.  it had to be to originally clone the iMac hard drive.

  • IMac won't boot with external drives attached

    I am using iMac 27" Late 2013 model upgraded to mavericks 10.9.4. Two external drives are always attached with it, one is segate 3.5" 2TB USB 3.0 drive and another one is 2.5" usb 2.0 drive.
    when i start my imac with external drives attached it won't boot up. Stuck at plain white screen after a startup chime, not even any apple logo or any progress circle appears. And i have to detach all of my drives to make it boot.
    This problem arises after upgrading to mavericks. Already tried resetting PRAM, SMC and checked Startup disk and verify disk with disk utility.

    Raja,
    Do a SMC reset perhaps even a couple of times and see if that helps. Also in System Preferences + Startup Disk make sure the internal HD is selected.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • Moving files to external drive - need Mac and PC compatibility in future

    Hello -
    I'm moving a client's video files to an external drive so they have the original files. I'm moving both the DV files (always usable with program that accepts DV files) and the Mac project files in a separate folder (in case they ever work on them in a mac - includes all the referenced files). I know they won't be able to open the latter on a PC but I'd still like to include.
    BUT, can they get any external drive? If I plug it into my computer and move files, are they going to run into problems if they use then on a PC? Thinking about getting this one for them (they are paying but want a good price for them):
    http://www.buy.com/prod/western-digital-500gb-my-book-essential-usb-2-0-external -hard-drive/q/loc/101/206409667.html
    Thanks for your help -
    Alexa

    Don't have a solution for you, but I did encounter a very similar bug.
    I was moving files from one iMac's external drive to another's internal drive, using a drag'n'drop move command on a directory. The move generated an error message, maybe the same as what you saw (I'm not sure), then aborted the move. Only one small file had been moved, and the source directory was gone! Not in the trash. Mac OS X 10.4.8 on both systems, an iMac DV and an iMac 24. The external drive was formatted as "Mac OS Extended (Journaled)."
    This sure seems to be a basic programming mistake. So, for me, it's back to doing 3 steps: copy, verify, delete. It's lousy not to be able to rely on proper execution of a basic command, but I've never won an argument with a computer.

  • IPhoto Preferences Hang After Move to External Drive

    Hello all,
    I bought a 2TB drive yesterday and moved my iphoto library to it.  Now, when I attempt to open iPhoto preferences it hangs and I must use force quit to exit. All of my photos, albums, etc. are intact on both my iMac and external drive.  I have Mac OS 10.5.8 and iPhoto 8.1.  I deleted my com.apple.iphoto.plist and com.apple.iphoto as I had read this may help.  It did not.  Now what? Should I rebuild or reinstall? 
    *As a side note, I upgraded my iPhone 4 to IOS 6 and have recently synced it with my Mac. Not sure if one has anything to do with the other. Thank you in advance.
    lisa

    Since iPhoto worked OK in the other account then there's something in your account that's causing the problem.  It could be a preference file other than iPhoto's.  Here's how to determine if that's the case:
    Trouble Shooting Preferences
    NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    1 - close all applications.
    2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.  
    3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock.  You will be asked to provide your Admin password.
    4 - reboot.
    5 - run the application again and determine if the problems is fixed
    6 - If the problem is fixed:
    A - open the working Home/Library/Preferences folder.
    B - Open the Preferences  folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
    C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
    D - reboot.
    7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
    8 - reboot.

  • Can't Boot From External Drive

    Situation:
    Prior to upgrading to Lion I used SuperDuper to create a copy of the existing internal hard drive on an new external drive (iOmega eGo 500GB).
    Tested booting from the external disk and it appeared to work correctly.
    Upgraded to Lion.
    Several days later attempted to boot from the external disk (by setting the start up disk in  the system preferenes ) but it fails.
    The system always boots into Lion.
    What I've tried:
    Setting the start up disk through system preferences
    Holding down the option key to select a disk on startup - interestingly enough I only see the internal hard disk and a recover HD. No sign of my external disk.
    Using a clean partition on the external hard drive I installed SL from the retail DVD. This produces the same effect of system booting to Lion on the internal drive, which suggests that the problem is not related to the copy I made using SuperDuper, but rather has to do with the external drive or something in Lion that prevents using an external drive (but I've never heard of such a thing).
    Talked to technical support at Apple since I had newly purchased Lion. They couldn't offer a solution but did give a lot of thought and suggestions - but they don't support booting from an external disk.
    Talked to iOmega technical support. Not helpful but did figure out at the end of an online chat that they don't support their disks being used for external booting.
    Emailed SuperDuper. Very helpful. They offered some suggestions but in the end these didn't work.
    Characteristics
    Lion 10.7.4
    iMac 2007
    External Drive Interface FW800
    I'd appreciate any suggestions as to the cause of the problem and possible fixes.
    Thanks

    @shootist007
    Still no success but more information:
    I found the USB cable for the drive, connected it to a powered USB hub (note that there are two cables going into the hub that must merge and go into a single connector for the USB interface on the drive). with both cables plugged in I still can't get the external drive to boot.
    I need to do one more experiment on this. The hub is fully loaded so I'll try removing as much load as possible on the USB to see if I can get it to work.
    Regarding your question, there is no way to get power to the drive. (Now I think about it, the design is for a portable drive that you can carry around with you so iOmega aimed the design at not needing a power supply to make it very portable). Hmmm, didn't think about that when I purchased it.
    If reducing the load on the hub doesn't make it work then I'l have to get a replacement drive with its own power supply.
    Thanks for your help. Even though no success yet I suspect you've identified the problem.

  • Setting up Time Machine to use an external drive attached to another mac

    I have an external drive connected to an iMac G5 (OS X 10.5.6) that is used by Time Machine on that mac. I would like to set up Time Machine on my MacBook Pro (also OS X 10.5.6) to back up to that same drive. File sharing is enabled on the iMac but I can't seen to mount just the iMac's the external drive. Rather, the MacBook Pro mounts the entire iMac file system --- it shows up as "brian.imac" under the 'shared' heading of the finder window; the iMac's individual volumes show up as folders. Time Machine doesn't seem to recognize these as allowable destinations. What am I doing wrong?

    Brian Curtiss wrote:
    When I click on "brian.imac" on the MacBook Pro it opens the iMac's file system in the finder window. The iMac's external drive appears as a folder in this window. Clicking on that folder opens the external drive in the finder (the icon along the top of the finder window even looks like a drive, not a folder), but the 'drive' doesn't appear on the desktop or along the left side of the finder window.
    that's normal.
    The iMac external drive is listed as an attached drive if I click on the "brian.macbook" under the "Devices" heading of the finder window (along with the built-in drive, mobile me drive and 'network,).
    This should be enough. normally, at this point the drive should appear as a possible TM drive choice. I don't know why it doesn't work for you.
    You can try the following terminal command. It should not be needed but maybe it will help
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    With the iMac's external drive's finder window (on the MacBook Pro) still open, clicking "Choose Backup Disk..." in the "Time Machine" system preferences window brings up an empty list. How do I get Time Machine to recognize the iMac's external drive as a valid choice?

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • Greetings.  I need to know what to do if a formerly recognized external drive is no longer recognized by my iMac.

    Greetings.  I could use some advice here.
    I bought a WD external hard drive to back-up some files on my old iMac, but I reformatted it & set it up on my new iMac.
    After I backed up the files I wanted, I hooked the external drive to the new iMac, but now the new iMac doesn't recognize that external drive. 
    What should I do?
    I also have a flash drive that neither iMac will recognize.  Similar issue or no?
    Would appreciate any adice I can get on these situations.
    Thanks for you time and attention.

    You need to deal with your vendor or AppleCare Customer Relations. We can't tell you what to do nor what is possible.
    It's unfortunate you have had these problems, but we really cannot resolve them for you. We do not represent Apple nor can we tell you what to do other than attempt to resolve the issue either with your vendor or through Customer Relations.

  • Should I upgrade the internal hdd on my 2008 8.1 iMac or use an external drive?

    I have an external hdd right now it is a 500gb go seagate goflex with a number of iTunes folders that I put on from my windows pc. I just received this 2008 2.4ghz core 2 duo 8.1 iMac and tried to import the files. The internal hdd is only 250gb so they would not fit, when I tried to get iTunes to run from the external drive it would but I would have to manually open each artist then album then song I wanted in the Finder for it to play. The songs do not show up automatically in iTunes, even though I think I followed all of the instructions for external hdd support. I was going to buy a new iMac and have the genius set it up, but now I think I am going to upgrade the RAM myself and am deciding wether or not I should also replace the internal hdd to 2TB or just get an external hdd so when I get a new iMac, maybe next year, I could still use it. However, I don't want to get another, larger external hdd if I'm going to have a hard time transferring all of my media to iTunes. Can I pay to have an apple genius do this at the store? I just upgraded the operating system to Snow Leopard and am waiting to upgrade RAM before moving to Mountain Lion. I just want my iTunes to sync up, at this point I will do just about anything, short of buying a new Mac. Thanks for any help.

    You can keep your iTunes collection on an external drive.  You can also keep just bulky items that you may not want to see often such as movies and just keep smaller items on the internal drive.  This split option is more tricky but there are several ways to do it.
    If all you have is a modest music collection, you can manage with an internal drive.  Most modern media collections with huge movies files fast outpace even larger internal hard drives and you will have to resort to an external drive.  Your computer dating from 2008 is (according to Apple's coproration standards) on its way to becoming a museum piece (hey, I still use a 10 year old computer, but Apple gave up hope for me years ago).  I would not upgrade the internal drive.   That will cost you a lot  and be tricky to take with you to your next computer. An external drive you can just plug into a new computer.
    Some of the issues you are encountering are because you do not yet know how to properly manage and transfer iTunes files.  We can help you, or you can pay somebody a lot of money to do this for you on a regular basis.
    Your GoFlex drive was used with Windows. Macs and Windows use different drive formats.  If you are now using Mac-only then you will need to reformat the drive (you will need to store all those files elsewhere while you are doing this).
    Do not buy just one external drive.  When that drive fails (oh, and believe me, it will) your whole collection will be lost.  Some of it you may be able to download again from Apple, but Apple does not "store" your iTunes collection, it is up to you to ensure its safety.

  • Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

    can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • Upgrading my intel iMac to internal SSD and running 1TB external drive from firewire 800 for mass storage while still using a second external drive for backups...my goal-speed with a SSD, to still have 1TB of room for everything i have now..possible?

    I seem to kill HD's every two years...the last two i've installed were WD Caviar Black 1TB 7200rpm 3.5" drives. The speed gains over  stock drives have been remarkable. I don't blame the drives for the failures, my machines are up and running 16 hours a day, every day, year round. They die from 'mileage' so to speak...i assume...there's no viral acvtivity or questionable downloads to gunk things up...just lots of work.
    I have my third new drive ready to install in my intel based iMac...but i've had a thought...I want to install a SSD in my iMac for the speed gain (and recent price drops)...for standard storage i want to use this new WD Caviar Black 1TB in an external drive bay and connect via firewire 800 for storing everything except the OS and my most commonly used software...am i crazy? will the firewire 800 external drive negate the speed gained with an internal SSD??
    I have four iMacs in my office, and one at home. I buy second hand and install new drives and boost memory. I'm going to do this on my 'home' machine...if it works out well i want to upgrade the other three this way...but first i need to know if i'm just dreaming, or will it really make a difference? or even possible??
    Thanks!
    2.66 intell core2duo
    2009 iMac
    8gig ram
    1 gig hd
    OSX ver. 10.8

    The SSD gives great bootup and Application launch speed. I think it also speeds up the video rendering a bit, I do all that on the SSD and then move the finished project to the external drives. As far as the speed for the external drives they are quick enough for viewing video and the file transfer rate is good. I had initially put the SSD into an external cradle (FW800) and the system was faster than on the internal drive. I only got a 1.5GBs SATA drive, perhaps yours could benefit from the 3GBs. I know the 6GBs would be too fast and costs a lot more, even the MacPros need special hookups to make use of the 6GBs.

  • Steps to put itunes (50 gb) on external drive and delete from imac.  How would I update my ipods and ipad from the external drive if I do this

    I am planning to put itunes library on external hard drive. My Imac is running out of room and itunes is 50+ gb of music.
    What steps do I take to do this.  Also, if I do so, how do I update my ipods and my ipad 2.  I do back up my files with time machine.  This would be a completely separate new external hard drive.  Thanks in advance for any help.

    Two ways:
    1. After transferring to the external drive create an alias to the iTunes Music folder on the external drive.  Copy the alias into your Home folder.  Rename the alias to "iTunes Music."  Delete the alias from the external drive.
    2. In the iTunes preferences click on the Advanced icon in the toolbar.  You should see a field labeled, "iTunes Media Folder Location."  Click on the Change button and select the /iTunes Music/ folder on the external drive.

Maybe you are looking for