Image Adjustments doesn't implement changes - help.

Hope someone can help me with this:
I am using Photoshop 11.0.1. I have two copies, one for myself and one for student workers in my office. For some reason, when we try to make an image adjustment -- such as changing levels or contrast -- we can see the preview of the change, but then when we click OK to implement the change, it jumps back to its original state and doesn't make the change.
Any ideas why? This is driving me kind of nuts.

I would try resetting the preferences by keyboard method or the manual way. I didn't see the operating system listed so you will have to scroll down to find the operating system if you do the manual way. Link:
http://kb2.adobe.com/cps/405/kb405012.html
Edit. windows 7 pref location is same as Vista.

Similar Messages

  • Is there a substitute tool path for "Image Adjustments Variations-" in Photoshop CS6 Standard Addition?

    Is there a substitute tool path for "Image>Adjustments>Variations…" in Photoshop CS6 Standard Addition that brings similar results?  I was used to using Image>Adjustments>Variations… in Photoshop CS4 Standard Standard Addition quite often. I upgraded to Photoshop CS6 Standard Addition to get the 64bit memory architecture compatibility on my Macbook Pro, booted in Mountain Lion.  I see now that Photoshop CS6 Standard Addition has the "Image>Adjustments>Variations…" tool path removed.
    I don't have Photoshop CS6 Extended, which has the all new Image>Adjustments>Variations… tool path.  I only have Photoshop CS6 Standard Addition so, if anyone can share with me a substitute tool set that can give me similar results to using the old "Image>Adjustments>Variations…,"  I would appreciate it.

    Thanks, R_Kelly.
    You helped me to start exploring other tools in the Image>Adjustments Menu.  "Image>Adjustments>Color Balance…" seemed to help me get the results that "Image>Adjustments>Variations…" used to deliver.  "Image>Adjustments>Photo Filter>Warming Filter (85)" also got me to where I wanted to be in desired adjustments.  I used to get the results I wanted in brightness, contrast, mid-tone adjustment, and color balance buy using just Curves, Variations, and Hue/Saturation.  Now I'll use "Color Balance…" and "Photo Filter>Warming Filter (85)" along with Curves, and Hue/Saturation.  I also have learned to use "Levels" some more to get the same effect as Adjustments>Variations…"  I always thought there were more technically precise adjustment tools to get the same effect as "Image>Adjustments>Variations…"  Adobe dropping Variations in Photoshop CS6 Mac version forced me to learn better image adjustment approaches for pre press color correction and image warming.  I feel confident now to make Photoshop CS6 my prime-time work tool and move the Photoshop CS4 launch icon off of my Mac OS app Dock.  Thanks again, R_Kelly.

  • Changing resolution and image size doesn't change result on screen?

    I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

    gradded,
    The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
    As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
    Hope this helps.

  • I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?

    I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
    Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with.

  • HT1491 Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.

    Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.
    Does anyone know what I need to do?
    Thanks. :-)

    What are the exact error codes that are appearing when trying to update?
    Have the steps for troubleshooting those errors as listed in the article from which the question was posted been tried?

  • Can I change my image editor (library pictures)?? help please :)

    Hi
    when you look in the library you can select all images used including background graphics (screen shots) and there is a picture of a pencil that says edit.
    Mine opens fireworks. Is this the default image editor or can I change this to photoshop & where do I do that ?
    Thanks

    Hi there
    Just a heads up on this. You may discover that after you configure the editor, Captivate may appear to lose track of it. I say this because if you edit later, you may still find that Fireworks or whatever still opens.
    What causes this is that Captivate allows you to work with different image formats. PNG, BMP, JPG, GIF, etc. Each of these types may have its own editor associated. So you might edit a GIF and see FireWorks open. But if you edit a JPG, you could see Photoshop open.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. Problem -- On Image Adjustments none of the adjustment options respond.

    I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. and everything worked for a day. On day 2 I ran into Problems -- On > Image >Adjustments none of the adjustment options respond. None of the toolbar functions such as >Crop etc respond.
    I then installed the same download on my PC and everything works as it should.
    Can anybody help please
    Roland

    Notebook Info
    1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
    Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
    43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
    8192 MB DDR3-RAM
    Harddisk: 1000GB SATA
    NVIDIA N15V-GM mit 1GB DDR3
    Prefs
    As per download settings, I changed nothing
    Image Info
    Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
    The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
    I then downloaded and installed on my PC and everything works.
    Regards Roland

  • Image Adjustments won't stay on

         Hey everybody, I'm Steven! I'm working on a sci-fi mural spacescape for my art class, and I'm having a bit of difficulty in the star scape area. See, whenever I do anything in the "Image > Adjustments" tab at the top of Photoshop, the preview on my page makes it look just how I want it, but after I click OK, or Apply, it either goes right back to how it was before I did the adjustment, or it does it to a degree, it just goes back halfway.
    For instance, when I click "add noise", then go to Image > Adjustments > Levels to thin the noise out to resemble stars, as a base layer to my starscape, and get it perfect, with the right amount of contrast and everything, when I click OK, it just goes back to big ugly noise. Now, I've added adjustment layers, but those effect everything under them, and I kind of need this to be specific. I've tried changing my mode to 32, 16 and 8 bit, as well as from RGB to CYMK and others. If anyone could help me out, I'd be really grateful! Thanks!
    (P.S. I'm using CS4, if that helps)
    Steven.

       Well, I did have one file that looked similar to it in the directory I was opening it from, so to be safe, I moved it and tried again, but it didn't work. The thing is, when I do Image > Adjustments, the preview on my actual canvas looks good, but when I click OK to lock it in, it just goes back to the way it was before, or kinda how I wanted it, but only a fraction, like half power. And when I save it, it also won't stay on. It will keep effect if I add an adjustments layer, and give me the desired effect, but it affects all the layers below it, not just the one I want, and it will revert to what it was before the effect if I save it as anything but a .PSD, for instance a .PNG, it will go back to white noise, not stars, just like Image > Adjustments. I did both Save and Save As, but they both had the same outcome. Haha, it seems I've really gotten myself in a pickle. Thanks for helping me out -
    -Steven

  • Image adjustments not staying??

    Hi helpers!
    I have come across a strange problem in Photoshop CS4 - I am trying to increase the contrast in some greyscale line drawings, however no matter if I adjust using levels, curves, exposure - it always appears OK as I'm using the slider bars but when I click OK the image returns to it's original state.
    I've tried saving as a PSD, TIFF, JPG, tried saving as CMYK., creating a new layer....
    Never come across this before...any help much appreciated!
    Amanda

    I have been since able to change contrast but only by going into the Window/Adjustments panel which
    does not require an OK click to confirm changes.
    Glad the images have been fixed but still can't understand why I can't keep the changes in my usual Image/Adjustments way of doing things.

  • Image Adjustments Replace Color

    In CS2 or 3 I was able to select Image > Adjustments > Replace Color (I believe that is what it was called) and it opened a window that allowed me to to select the color that I want to replace and I was able to change the color in that window. I no longer see it in CS5. Was it moved somewhere else?
    Thanks.

    It should still be there.
    Is it greyed out (32 bit image open) or the workspace your using
    doesn't show it? (should be a Show All Menu Items at the bottom of the
    adjustments menu)
    MTSTUNER

  • How to implement Search Help in Interacive Form based on WebDynpro Java?

    Hi Experts,
    How to implement Search Help in Interacive Form based on WebDynpro Java?
    Could someone please provide the prerequisites and the code for the same.
    Regards,
    Shobhit

    Extend the controller and get the handle of the current row of the VO. Set set the attribute context filed accordingly. Also get the handle fo the flexbean and set the context. According rendering would change.
    Regards
    Sumit

  • APERTURE: Small preview images do not show the changes.

    excuse my lousy english...
    Problem with Aperture:
    Small preview images do not show the changes.
    I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
    Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
    This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
    I had a third installed for books and not as close a relationship.
    Does anyone have similar experience or know someone how can I fix this?
    Thanks for reading!
    Lokoe

    Lokoe,
    To make sure we understand:
    I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
    I am not sure what "s/w" is, but I think you mean:
    "I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
    Even in the books then the famous picture colorful and even grobpixelig.
    "In the books the selected picture is colorful and even ???"
    "Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
    nathan

  • My SDK doesn't implement Cipher, course of action

    Hi, all. First of all let me tell you that I've checked the forum for this topic. Found 44 threads when searching for "Cipher". I've pretty clear that due to restrictions from the U.S. Goverment, the Sun JC kit doesn't implement the Cipher class. That's understood.
    Now, my SmartCard Vendor (DataCard Aptura) doesn't implement it neither the Cipher class on it's sdk. I've asked for support and they have told me that they won't add that Class. So I can't count on them.
    So, the purpose of this post is to find out the course of action. I've just two options, either I implement the class by myself or I get it (buy it, if it's possible) somewhere else. I don't want you to do my work, I just need some light because I'm new to this cryptography over smartCard thing.
    So I've this questions which require short answer (hope so):
    1.) According to your experience, should we implement it by ourselves? Or should we look for some vendor that has already implemented it?
    2.) I that were the case (that we should implement it by our own) could you estimate the amount of time (or resources) needed, considering just one programmer.
    3.) Are there some special considerations that I should take in order to save memory. Please notice that the current version of Aptura prohibits the use of transient arrays on the card, due to a bug inside the core of the VM. It doesn?t reclaim the space after it?s been used, for instance after a reset, it won?t reclaim the all the transient space used.
    4.) If it would take a considerable amount of time to implement the Cipher class by our own, do you know some vendor that has already implemented and can save us that time?
    Any other light or aspect that you might think it's important and I've missed here, would be appreciated.
    Many Thanks in advance.
    CL

    Well no. All I want is to have cryptography on my card (that I didn't choose for the project I just received like "this is the card"). And this vendor doesn't have an implementation of the Cipher class.
    As a parenthesis () there is not Int as you properly mentioned, but I implemented by hand, unsing Zhiqun Chen proposal (on her book JavaCard Technology for SmartCards). I know that approach is not quite efficient, but it works (considering that for financial purposes a short is not enough).
    Well, back to our business. Also I'm concious that the approach of implementing the cryptography by myself would not win the efficiency award for Smart Card, but I need to do something and trying to change the card at this point (I didn't choose it, as I told you) would not be the first solution, due to the fact that the production cards are already ordered. So that's the actual situation.
    So, I'm pretty sure the problem is on the side of my vendor. Is not that I'm washing my hands on him, it's just the fact. Here you'll find my little test I'm trying to run. It crashes after the following line on the process (APDU apdu) method:
    cipher.doFinal(data, START, (short) data.length, cipherText, START);
    And here's my code:
    //CVS Tests
    package com.datacode.bi.Purse;
    import javacard.framework.*;
    import javacardx.crypto.*;
    import javacard.security.*;
    public class Purse extends Applet
    public static final byte START = (byte) 0x00;
    private DESKey desKey;
    private Cipher cipher;
    private byte [] cipherText;
    protected Purse(byte[] bArray, short bOffset, byte bLength)
    cipherText = new byte [100];
    try {
    desKey = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES, KeyBuilder.LENGTH_DES, false);
    desKey.setKey( keyData, START);
    cipher = Cipher.getInstance(Cipher.ALG_DES_ECB_ISO9797_M1, false);
    cipher.init(desKey, Cipher.MODE_ENCRYPT);
    catch (CryptoException e) {
    register();
    * Installs Java Purse applet.
    * @param bArray to pass to register() method.
    * @param bOffset to pass to register() method.
    * @param bLength to pass to register() method.
         public static void install( byte[] bArray, short bOffset, byte bLength )
    byte instanceLength = (byte) bArray[bOffset];
    short instanceOffset = (short)(bOffset + 1);
              new Purse(bArray, instanceOffset, instanceLength);
    * Performs the session finalization.
         public void deselect()
    * Dispatches APDU commands.
    * @param apdu APDU object
         public void process(APDU apdu)
    byte[] buffer = apdu.getBuffer();
    try {
    //ISOException.throwIt(
    cipher.doFinal(data, START, (short) data.length, cipherText, START);
    //ISOException.throwIt(DEBUG_CODE);
    apdu.setOutgoing();
    apdu.setOutgoingLength((short) cipherText.length);
    apdu.sendBytesLong(cipherText, START, (short) cipherText.length);
    catch (APDUException e) {
    catch (CryptoException e) {
    private final static byte [] keyData = {    (byte) 'C',
    (byte) 'a',
    (byte) 'r',
    (byte) 'p',
    (byte) 'e',
    (byte) ' ',
    (byte) 'D',
    (byte) 'i'
    private static final byte [] data = { (byte) 68,
    (byte) 111,
    (byte) 32,
    (byte) 121,
    (byte) 111,
    (byte) 117,
    (byte) 32,
    (byte) 98,
    (byte) 121,
    (byte) 116,
    (byte) 101,
    (byte) 44,
    (byte) 32,
    (byte) 119,
    (byte) 104,
    (byte) 101,
    (byte) 110,
    (byte) 32,
    (byte) 73,
    (byte) 32,
    (byte) 107,
    (byte) 110,
    (byte) 111,
    (byte) 99,
    (byte) 63,
    (byte) 65
    private static final short DEBUG_CODE = (short) 0x9999;
    >
    Aptura prohibits the use of transient arrays on the
    card,based on that I would try other vendors, IBM
    JCOP, Datakey, G&D Sm@rtCafe, Gem+ GemXpress RAD, and
    SLB all implement the javacard.security,
    javacard.crypto classes and the transient arrays are
    COD/COR.

  • How to implement Change pointers for Purchase order - ME22N - Custom Fields

    Hi Experts,
    Can you please tell me how to implement - Change Pointer for Custom fields in IDOC.
    I am working on IDOC - For purchase order - acknowledgements - in custom screen/tab in ME22N.
    Everything is working fine according to my requirement.
    All i need to know is the process of - Creating/Change - Change pointers for Custom fields.
    1.How to implement change pointers for custom fields.
    2.Can we maintain - Change Document - for custom fields at data element level?
    P.S. - I have browsed many previous - forums before posting a new discussion.
    please share your inputs...
    explaining how to create/implement - change pointers for custom fields will help me .
    Regards,
    Karthik Rali.

    Hi,
    To maintain Change Document for custom field:
    1. Check if "Change document" checkbox is set in data element.
    2. Find Change Document Object for transaction.
       You can use SQL trace - ST05.
       Look there for line with table CDHDR and statement insert values
       (for example for transaction KA02 Change Document Object is KSTAR)
    3. Regenerate update program for this Change Document Object in transaction SCDO
    Change documents for z-fields schould be generated.
    I am not sure about change pointers but they are configured somehow in BD61 and BD50.

Maybe you are looking for