IMG -pc not working on /dev/sdb

When I boot from PXE and the fixed disk is detected at /dev/sda, I can create partitions to my hearts content. However, when I boot from a USB device, the fixed disk is detected as /dev/sdb. (the USB drive is now /dev/sda) And when I run "img -pc 1", it just hangs indefinitely. (eventhough "img -partition" lists the fixed disk as /dev/sdb)
This is all after running "parted /dev/sdb rm 1" and img -pd -all". So the fixed disk is completly erased in both cases.
I also noticed the same problem with zisedit after clearing the fixed disk; If I PXE boot (fixed disk detected as /dev/sda), I can run "zisedit N={new name}" with no problem. The new name get's applied to Image Safe Data just fine, as I can verify it by running "zisview". However, if I boot to USB where the USB gets detected as /dev/sda and the fixed disk changes to /dev/sdb, I cannot rename it. It takes the command OK, it just never gets applied.
My client wants to boot from PXE (or USB) and be able to clear the fixed disk completely, create custom partitions, AND be able to rename the computer in ISD before the image comes down. So, zisedit can change its name in the OS automatically.
My PXE menu and USB menus are currently indentical. I have created scripts to parse the output of "img -partition", so I can determine the fixed disk whether I'm PXE or USB booting. I just need to know a way to specify the fixed disk as a parameter, if possible.
I've also tried to make the USB drive always be /dev/sdb, so the fixed disk would still be detected at /dev/sda when USB booting. But, this has also been challenging. But, I think it might work too. I just don't know of a way to do this either.
Anyway.. HELP! and thank you

Hi
How did yo create you USB boot disk? On 11.3?

Similar Messages

Select query not working in Dev but working in QA and PRD

Hi All,
I have a select query with inner join which is not working in the DEV but working in QA and PRD. Anyone has any idea why is it happening, I think it to be a basis issue. Just want to confirm if anyone has any other idea.
Thanks in advance,
Barjinder Singh.

Hi Barjinder Singh,
In development you can't find the records for the table.
In testing system only you can test even the program(report).
If it is the DEV system you can't get the data.
Go and see into the table wether it has records or not(in DEV system).
It doesn't has the records in DEV system.
Regards,
Balakrishna.N

Lvm pvcreate not working (need /dev/sda9 entry)

Hi.
Here's my partition table layout:
[root@arch01 gregb]# uname -a
Linux arch01 2.6.20-ARCH #1 SMP PREEMPT Sat Mar 24 10:51:35 CET 2007 i686 Intel(R) Celeron(R) CPU 2.40GHz GenuineIntel GNU/Linux
[root@arch01 gregb]# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 251.0 GB, 251000193024 bytes
255 heads, 63 sectors/track, 30515 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12 96358+ 83 Linux
/dev/sda2 13 255 1951897+ 82 Linux swap / Solaris
/dev/sda3 256 30515 243063450 5 Extended
/dev/sda5 256 1471 9767488+ 83 Linux
/dev/sda6 1472 2687 9767488+ 83 Linux
/dev/sda7 2688 3903 9767488+ 83 Linux
/dev/sda8 3904 5119 9767488+ 83 Linux
/dev/sda9 5120 30515 203993338+ 8e Linux LVM
[root@arch01 gregb]# lvm pvcreate /dev/sda9
Device /dev/sda9 not found (or ignored by filtering).
As you can see, pvcreate cannot find /dev/sda9.
If I look in /dev, there is no entry for /dev/sda9 (but sda1-sda8
are there).
What do I need to do to create the /dev/sda9 entry?
Thanks.

It turns out that rebooting "fixed" the problem. After rebooting pvcreate on /dev/sda9 worked.
Anyone know the name of the command/process which adds device special files to the /dev directory
during boot?

ITunes 10.3.1 not working on Dev Preview of Lion.

As soon as I boot it up, it tells me that said version of iTunes is not designed for my build of OS X, and it crashes on me.
Here's the error.
Process:         iTunes [940]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [141]
Date/Time:       2011-06-17 18:27:58.831 -0500
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report:          94293 sec
Crashes Since Last Report:           8
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      D2EB4985-7D50-4423-89CE-3019A65B185A
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.18f5
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F0B00000000, 0x4E5431475436345538484230424E2D334320
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F0B00000000, 0x4E5431475436345538484230424E2D334320
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.7
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-85J, 5.95 GB
USB Device: iPhone, apple_vendor_id, 0x1294, 0xfd100000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2

No problem...
Apple Developer - use the Mac Dev Center link...requires logon.
Good luck

EREC BSP link not working on dev portal

Hi,
I need to find the link to open the E-Rec BSP application through portal. I am new to the system and dont know how to find it. Can any one help?
I know the link for PROD system but not for DEV....any clues..suggestion...
Thanks & Regards,
Shruti

Hi I checked the transaction RZ11 for parameter icm_host_name_full parameter ....the values there are not set. I Then tried editing it in tcode RZ10..here its already set but it doesnt gets reflected in RZ11 tcode...kindly help

Text messages not working on Dev Alpha

Hi,
I recently updated my Dev Alpha B device to the latest OS version (10.0.10 Bundle 263), it includes a text messages app and it also includes text messages in the BlackBerry 10 Hub. As far as I can see none of this works, I can compose a message, but when I tap send the app just reverts to it's original state and the message never gets sent, There's no error message. I can't receive text messages either. The rest of the BlackBerry hub works, the phone app also works, so there's no problem with my cell network connection.
Is this a known issue? Will we get an update that fixes this?
Please click the like button if my post helped you! Thank you.

can you make & receive phone calls?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

MSS PCR working in DEV and not in QA

Hi All,
I have created a new custom PCR which is working fine in Dev and is not working in QA.
Dev: Configured Scenario, IMG, attached Workflow, maintained the BADI.
Tried putting in the breakpoint in the BADI also.
Can someone please guide me in the process?
Thanks,
Anil.

Is it transported to QA?
Thanks,
Gokul

In dev server my payment advice form f110_prenum_chc is not working

hi,
friends i need urgent help.
1) i have copied f110_avis_in frm 000 client to 200 client with form name
   z_prenum_dup.
2) i have copied f110_prenum_chc frm 000 client to 200 client form name
zf110_prenum_chc1.
3) then i modified my both forms in 200 saved assigned TRs and
transported frm DEV server to PRD server(client 700).
4)in dev server 200 client my both forms are working
but in prd server 700 client my form cheque z_prenum_dup is
working but payment advice form zf110_prenum_chc1 is
not working.
5) but i can see my both forms r their in 700 prd server in se71 t.code.
6) if i run f-58 tr.code and by switching on debug mode i can see my
   cheque form but not payment advice form.
7) if i run in 200 client i can see my both forms.
can any body plz help me out of this issue.

Dear,
   I will be able to put some points, if you can give me some more idea about ur problem,
1, Does system giving any error..?
2, Can you see a preview..?
As I understood, it must not have any problem in transportation.
You can also check with Respective functional consultant whether he has done with required customization in NACE..?
One more thing you can do is,
open a program RSNAST00 and put break point at " PERFORM (tnapr-ronam) IN PROGRAM (tnapr-pgnam) USING returncode", here you can check at runtime ( While in debugging mode) the value of field TNAPR-FONAM, this value must be your SmartForm. If it is not the case then, there is problem with NACE settings and contact your functional counterpart.
Hope it's helpful .......Enjoy.
Regards,
Chetan

App Insights for web application not working when deployed to Dev server

App Insights is not sending telemetry data for ASP.NET MVC web *requests* (page views from the JS instrumentation are fine) when the app is deployed to the Dev or Test IIS servers. On local IIS express it works perfectly fine. I have
no idea how to troubleshoot this problem.
Bert Jackson

- the AI.config file is both in the root of the site, and the /bin folder (which was confusing the other day). Both are correct.
- it looks like a local browser can go to https://dc.services.visualstudio.com (it results in a 403 since its just a GET to the root). During this test, I found that this server did NOT have the Root trust certificate (Baltimore cybertrust), which
would cause problems when using IE locally to browse the app; the javascript AI logging was not working, because it couldnt fetch the ai.0.js file). I got the proper root certificate installed on the server, but request logging still not working. I
dont believe the firewall is a problem.
- I've verified that all binaries are indeed deployed in to the bin folder on the server
- web.config does have the AI http module; I've verified via logging that the ApplicationInsightsWebTracking is loaded. However, I have custom Context/Telemetry initializers, and their Initialize() methods are *NOT* being called when deployed on the
server. I've tried both ways of registering the initializers; via code in the Application_Start() event and also in the ApplicationInsights.config file.
I don't know how to troubleshoot any further, to figure out if AppInsights is actually *trying* to send telemetry out and failing, or if its not actually even trying.
Bert Jackson

F4 HELP not working in QA, but does en DEV :o(

Hi Folk,
I hgave a situation where the F4 (Binocular) works perfect in DEV.
But when it comes to QA system, the F4 search help does NOT work for the account aswsignment fields, but does for the rest.
Any ideas?
Thanks in advance,
Thomas

Hi,
One more point affecting the search help for cost center is authorisation for the resp role in PFCG i.e.
say the user role is SAP_BBP_STAL_EMPLOYEE
you go to PFCG
go to roles
doubleclick on inbuilt single role ....EC_BBP_EMPLOYEE
click on tab authorozation
go to display/change auth data
go to BBP component
go to first option 'SRM: Allgemeine Zugangsberechtigungen im EBP'
check 'BE_F4_HELP' is flagged.
If no tick here you will not see binoculur in EBP for user of that role
Also see the foll note if the search help is not displayed :
Note 656633 - Search help requires dialog users
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Specific extractor works in DEV but not in QUAL

Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AM

There is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
                 WHERE h~object_id    IN lr_object_id
                   AND h~changed_at   >= lv_timestp
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ELSE.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i         "PACKAGE SIZE I_MAXSIZE
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
*                 UP TO I_MAXSIZE ROWS
                 WHERE h~object_id    IN lr_object_id
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_no_auth_check     = abap_true
      it_header_guid       = it_guids      "500 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_h        = lt_orderadm_h
      et_service_os        = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_only_spec_items   = abap_true
      it_item_guid         = it_guids         "10 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_i        = lt_orderadm_i
      et_sales             = lt_sales
      et_appointment       = lt_appointment
      et_status            = lt_status
      et_text              = lt_text
      et_subject           = lt_subject
      et_doc_flow          = lt_doc_flow
      et_customer_i        = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do...

Variable works in Dev but not in Test in Webi report

Hi All,
I have written a variable to calculate Average. It works fine for all entries in Dev. But when I transport it to Test Environment, it works fine for some entries and does not work for some entries.
Any suggestions?
This is happening in WEBI Report.
Regards
Edited by: No.One on Sep 21, 2011 2:45 PM

Hi,
Compare the formula of the variable in Dev and in QA. Might be some operands might bwe missing in QA environment.
Cheers,
Suresh Aluri.

Custome Tcode is not working in QA system but working in DEV system

Hello,
We have copied QM11 tacode to ZQM11. We found this ZQM11 tcode is not working in QA system, but properly working in DEV system. When we are execute this tcode from QA system with all required input, it says
"No objects could be selected that met your selection criteria."
But when do it in DEV system it is working fine. I have done following steps to check error
1) All authorizations are good
2) I have compared E070 and E071 table to found transport done with proper way.
3) I have checked SE93, tcode condition is good.
4) SE97 -->found call transaction is QM11 for ZQM11
5) From program code level Authority check maintained properly.
AUTHORITY-CHECK OBJECT 'Q_QMEL'
             ID 'QMART'    FIELD I_QMART
             ID 'TCD'      FIELD I_TCODE
             ID 'WERKS'    DUMMY.
6) Performed authorization trace to found error agains object Q_QMEL (RC =4), but in the role Q_QMEL has define with it's proper value supplied by our functional team.
7) Shows all active object in SU24 against ZQM11 are good
8) When we call tcode it has thrown the error agains Q_QMEL only
I am not able to understand why does not work this tcode in QA system, although working in DEV is good.
Please help me to resolve this issue
Thanks
Pavel

Bieng declared $WERKS field as DUMMY, is not relevant, so no matter its value, it will pass..
There's a catch! If even DUMMY means literally that no matter user has any value, he is still authorized but in reality for such \fields authorization check is only successful when a value ' ' or * is found in user's authorization else it errors out.
Sorry confused with programs where AUTHORITY-CHECK has ' ' coded instead of DUMMY. You are right, DUMMY specified for as field would pass authorization check with any/no value in user's authorization. Please ignore my statement
Sandipan
Edited by: Sandipan Choudhury on Dec 29, 2010 2:11 AM

Browse for file/img not working - Win 7

Browse for file/img not working still - Win 7
I have tried "run as Admin" and in "XP Compatibility mode" but still no luck fixing this issue in Win 7. Anyone have a potential fix so I can stop wasting time double checking every link/img on new work?
Thanks!

Are you referring to this issue?
Problem selecting local root folder in Vista & Windows 7
http://forums.adobe.com/thread/478327
If so, there's no fix yet and not likely to be one.

Boot fails due to /dev/sdb not showing up after update

For some reason, my secondary hard disk has stopped being detected after I updated my Arch Linux machine today. This machine has not been updated for about a year (I have been away). Basically, /dev/sdb* is not in /dev/. There is only /dev/sda*.
The current kernel installed is 2.6.39.
The error I get on boot is when it tries to detect the hard drives. I would try to provide a log file, however every time I try to plug in a USB stick, it says that it is disabling IRQ #10, and it won't start the network so I can't ssh the information to any other computer. I can log in by removing sdb from the fstab, so I will try to get /var/log/messages on here later.
I am using udev to detect my hard drives on startup.
Anybody know how to fix this problem?
I can log in perfectly fine if I remove any mention of sdb from my /etc/fstab.
Thank-you in advance for your help,
kev717.
Last edited by kev717 (2011-07-17 01:49:12)

Assuming you have a BIOS based computer, have you tried the BIOS configuration program to see if the drive is detected by the BIOS ?

IMG -pc not working on /dev/sdb

Similar Messages

Maybe you are looking for