IMP : unable to upload the rtf template

Hi all,
I am getting the following error while uploading the template for a report. Can anyone please tell me what this error is all about and what should be done to correct this .....please treat this as urgent.
*The error I get:
Invalid report definition: ItemCreationDate.xdo missing*
Thanks in advance
Ronny

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

Similar Messages

Xdo loader is not replacing the RTF template

Hi ,
I am using the below syntax to upload the RTF template. It has to replace the existing template. But it is not doing.
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME apps -DB_PASSWORD $apps_pw -JDBC_CONNECTION $p_host:$p_port:$p_instance -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME XXNIN -LOB_CODE XXNINOMPRICELISTAUDIT -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -FILE_CONTENT_TYPE 'application/rtf' -FILE_NAME $XXNIN_TOP/patch/115/import/US/R_4057_PRICE_LIST_AUDIT.rtf -CUSTOM_MODE=FORCE
Regards
Lokesh

i used
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME apps -DB_PASSWORD $apps_pw -JDBC_CONNECTION $p_host:$p_port:$p_instance -LOB_TYPE TEMPLATE -APPS_SHORT_NAME XXNIN -LOB_CODE XXNINOMPRICELISTAUDIT -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -FILE_NAME $XXNIN_TOP/patch/115/import/US/R_4057_PRICE_LIST_AUDIT.rtf -OWNER APPS -CUSTOM_MODE FORCEfor your sample data
for more info plz see
How To Use XDOLoader to Manage, Download and Upload Files? [ID 469585.1]

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

How to Upload a RTF Template from desktop with out using XML Publisher resp

Dear All,
While uploading an RTF template for an XML report through XML Admin responsiblity, i am getting some weird error. So, i am looking for other options of uploading the Template. Can any one let me know if any other options are available. Can i use FNDLOAD? But i think it is to move the files between instances. My requirement is to upload the template only from my desktop.
Please suggest
Thanks
Raj

Hi,
Thanks for the reply.
When i am trying to upload from XML Publisher Admin responsibility, i am getting the following error:
oracle.apps.fnd.framework.OAException: java.sql.SQLException: No corresponding row found in XDO_LOBS
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:865)
     at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:988)
My Template size is 1.7 MB.
Application Release is : 11.5.10.2
DB Version: 10g
OS: Unix
Thanks
Raj

XML Publisher:Concurrent Prg not picking the RTF Template

Hi All,
We developed the rdf report and design the layout and we registred it.when we run the concurrent program program is not picking the RTF template.
We are using the Following version.
Oracle Apps 11.5.10
xml pub is 5.6.2
So please do the need ful, pleaseeeeeeee
Thanks & Regards
Leela

that suggests you haven't got the setup of the data definition and/or the layout template right.
Go into the XML Publisher administrator responsibility and select 'Data Definition'
You need to make sure that when you create the data definition it has the same code as the concurrent program short name and application. This is the connection between the two.
Having create the data definition, click on the 'Templates' tab and create a template. It should connect with the data Definition you have just created.
Now upload your layout template file.
If you have this right, then you will be able to see the layout template from the onsite setting tab.

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

I am unable to upload the customer master data using BAPI.?

Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...

Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe

Function Module For Upload the Powerpoint Template in Webdynpro ABAP

Hi,
Can anyone tell me, is there any standard function module to upload the Powerpoint Template to Webdynpro ABAP.
Regards,
Saran

Hello Saran,
for uploading the powerpoint as file you could use the FileUpload ui element.
Best regards,
Thomas

Unable to determind the upgrade template on TFS 2013

Hi,
I get “Unable to determind the upgrade template” when I try to create a build from Team Explorer Everywhere although the old Upgrade template exist in the TFS Project under BuildProcessTemplates.
The software I am using is
IBM RSA 8.5 (with Eclipse)
TFS 2013.3
Team Explorer everywhere from: http://dl.microsoft.com/eclipse/tfs
Anyone have any suggestions?
/Magnus

Hello again,
It’s just in one of my TFS project I have this problem and it didn’t help to use older versions of the build process templates.
/Magnus
Magnus Timner

Unable to Upload a RTF to a Template

Hi All,
I am getting a strange error while uploading a 'RTF' to a 'Template'
"Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance. "
I am unable to get the proper information on the net too. P
Could any one of you please help me in this.
Thank you,
Aush..

My first suggestion would be to post to the correct forum:
Business Intelligence Foundation
cheers

Unable to upload an rtf to templatein XML Publisher.

Hi,
I am getting the following error while uploading an rtf to the template in the XML Publisher Administrator.
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Thank You,
Vinay

I am getting the following error while uploading an rtf to the template in the XML Publisher Administrator.
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed. Was this working before? If yes, any changes have been done recently?
Please check apache/database log files for details about the error.
Thanks,
Hussein

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Unable to debug the Data Template Error in the Log file

Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
     at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh Singh

Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue?

Hi i have been lucky enough to take delivery of the Nikon D810 but am unable to upload the raw images into LR5 or Photoshop CC 2014 is this just a matter of waiting for a new version of ACR ?? Thanks

Hi i have been lucky enough to take delivery of the Nikon D810 but am unable to upload NEF files into LR5 or Photoshop CC 2014 is this just a matter of waiting for the next version of ACR ???

What version of Camera Raw do you have? Do Help - About Plug-in... - Camera Raw to see.
If it's not 8.5, which is the latest current release as of this writing, you might want to look this over: Camera Raw updates cannot be applied
Just looking over the list here - Camera Raw plug-in | Supported cameras - I don't see the D810 listed at all. Maybe that page isn't updated or maybe the camera is newer than even the newest Camera Raw release, in which case you'll have to wait for Camera Raw 8.6. Note that Adobe often releases beta versions early so the wait may not be that long...
-Noel

IMP : unable to upload the rtf template

Similar Messages

Maybe you are looking for