Implement a table menu using ALV

Hi,
I was wondering if its possible to implement a standard sap table menu bar into WDA using ALV?
is there a doc that explains that?
I'm looking for something similar to this
[screenshot|http://www.mypicx.com/02202009/menubar/]
Thanks in advance.

what sort of program do use data structure? let's say
i want to use binary search on data , how can i?As nasch said: pretty much any program uses data structures.
Okay, let's say you want to try binary search. You could do that on an array, on a singly linked list, on a doubly linked list, probably on others that I can't think of right now.
If you just want practice using the data structures you've learned, then why not write a binary search over several different ones? That will give you a feel for how they differ in usage and performance.
Or, you can just pick any kind of program that interests you. Unless it's trivially small and simple, there will probably be a use for one or more of the data strux you've learned.
A chat program needs data structures to hold curently connected users, ongoing conversations, maybe a queue for messages waiting to be sent.
A card game needs to be able to search to see if a given card is in a given hand. Needs to hold all the cards in a deck that has to be shuffled. Dealing is like popping off a stack.
A database of students and their courses might want to keep something in an ordered tree--by last name for instance.
What applications interest you?

Similar Messages

Table updation using alv

Dear Expert,
While updating the jest table against the Order number, the data in the table is not getting affected. When i refresh the list t again shows the order number. Can anyone please provide me sample ALV program where it displays the list of Orders.
when one selects the order the order should get approved.
if i get sample program then i would be helpful.
Regards,
Shakti.

hi Sapbond007,
You have to create an ALV event handler class to write back the data that has been changed in your ALV.
Please refer to example programs BCALV_EDIT_* (I think BCALV_EDIT_04 should be the correct one)...
or you should refer This code
Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
Regards
Saurabh Goel

Using ALV table inside the WD CHIP

Hi,
I am trying to display the internal table values using alv component in WD CHIP. But, not able to add the component usage as SALV_WD_TABLE.
Can anyone please confirm how can we use the ALV component inside the WD chip.
My requirement is that based upon the selection parameter provided by the user in the CHIP, i need to display the resource id in a table in the same CHIP.
Thanks,
Jayaprakash

Hi Kabil,
You mean in WD CHIP. It seems that it is behaving differently when working with CHIP.
It is not allowing me to add other components like SALV_WD_TABLE.
Thanks,Prabu

How to display selected table fields in ALV report.

Hi,
I am displaying data from table EKPO using ALV through this query.
select * from ekpo into table itab_ekpo up to 25 rows.
bt if i need to display selected fields like
select ebeln matnr netpr from ekpo into table itab_ekpo up to 25 rows.
IT gives error GETWA_NOT_ASSIGNED.
FIELD SYMBOL HAS NOT YET BEEN ASSIGNED
CAN ANYONE PLZ HELP ME.

Hi ,
      I am pasting the code in which i am getting the error.Plz help.
REPORT ZHALV.
tables:ekpo.
data itab_ekpo type ekpo occurs 100 with header line.
types: begin of itab_new,
       f_ebeln type ekpo-ebeln,
       f_matnr type ekpo-matnr,
       f_netpr type ekpo-netpr,
       end of itab_new.
data itab1 TYPE STANDARD TABLE OF itab_new initial size 0.
type-pools: slis.
DATA: lt_fieldcat TYPE slis_t_fieldcat_alv,
      lf_fieldcat TYPE slis_fieldcat_alv.
DATA:    ws_repid TYPE sy-repid VALUE 'ZHALV'.
DATA: l_layout   TYPE slis_layout_alv.
selection-screen Begin of block block1 with frame title text-111.
select-options : S_EBELN for EKPO-EBELN.
selection-screen end of block block1.
INITIALIZATION.
start-of-selection.
select ebeln matnr netpr from ekpo into table itab1 up to 10 rows WHERE EBELN IN S_EBELN.
*select * from ekpo into table itab_ekpo up to 25 rows.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM GET_DETAILS.
end-of-selection.
*&      Form build_fieldcatalog
      text
FORM build_fieldcatalog .
PURCHASING DOCUMENT NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'EBELN'.
lf_fieldcat-ref_tabname = 'EKKO'.
lf_fieldcat-ref_fieldname = 'EBELN'.
MATERIAL NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'MATNR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'MATNR'.
APPEND lf_fieldcat TO lt_fieldcat.
NET PRICE IN PURCHASING DOCUMENT
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'NETPR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'NETPR'.
lf_fieldcat-cfieldname = 'WAERS'.
lf_fieldcat-do_sum = 'X'.
APPEND lf_fieldcat TO lt_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form GET_DETAILS
      text
FORM GET_DETAILS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
                             I_INTERFACE_CHECK                 = ' '
                             I_BYPASSING_BUFFER                = ' '
                             I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = ws_repid
                             I_CALLBACK_PF_STATUS_SET          = ' '
                             I_CALLBACK_USER_COMMAND           = ' '
                             I_CALLBACK_TOP_OF_PAGE            = ' '
                             I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
                             I_CALLBACK_HTML_END_OF_LIST       = ' '
     I_STRUCTURE_NAME                  = 'EKPO'
                             I_BACKGROUND_ID                   = ' '
                             I_GRID_TITLE                      =
                             I_GRID_SETTINGS                   =
                             IS_LAYOUT                         =
                              IT_FIELDCAT                       = lt_fieldcat
                             IT_EXCLUDING                      =
                             IT_SPECIAL_GROUPS                 =
                             IT_SORT                           =
                             IT_FILTER                         =
                             IS_SEL_HIDE                       =
    I_DEFAULT                         = 'X'
    I_SAVE                            = 'A'
                             IS_VARIANT                        =
                             IT_EVENTS                         =
                             IT_EVENT_EXIT                     =
                             IS_PRINT                          =
                             IS_REPREP_ID                      =
                             I_SCREEN_START_COLUMN             = 0
                             I_SCREEN_START_LINE               = 0
                             I_SCREEN_END_COLUMN               = 0
                             I_SCREEN_END_LINE                 = 0
                             I_HTML_HEIGHT_TOP                 = 0
                             I_HTML_HEIGHT_END                 = 0
                             IT_ALV_GRAPHICS                   =
                             IT_HYPERLINK                      =
                             IT_ADD_FIELDCAT                   =
                             IT_EXCEPT_QINFO                   =
                             IR_SALV_FULLSCREEN_ADAPTER        =
                           IMPORTING
                             E_EXIT_CAUSED_BY_CALLER           =
                             ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = itab1
      EXCEPTIONS
                             PROGRAM_ERROR                     = 1
                            OTHERS                            = 2.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*append itab_ekpo to i_tab.
ENDFORM.                    "GET_DETAILS

Role based menu using JAAS

Is it possible to implement role based menu using JAAS in web application ? My requirment is to enable or disable menu items on the screen based on the roles of the logged in user .
Can some one help me on this ?

Is it possible to implement role based menu using JAAS in web application ? My requirment is to enable or disable menu items on the screen based on the roles of the logged in user .
Can some one help me on this ?

Operation on a DDIC using ALV

hi abaper's
               i have to make ALV report in which i have to display custom table data using ALV and all operation what we can do on DDIC ztable(like delete save change etc) these operation we can do only on UI screen. so please help me how to do this
points will be rewaded
thnks n regard
pardeep kumar

Hi by adding extra button on alv output tool bar like SAVE , DELETE , MODIFY
like this
In order to add user command functioality to the ALV grid you need to perform the following steps:
                    1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include 'USER_COMMAND' FORM
                2. Create 'USER_COMMAND' FORM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_callback_user_command = 'USER_COMMAND'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
we can define our own screen by doing like thsi
In order modify PF_STATUS of ALV grid report you need to perform the following steps:
     1. Update 'REUSE_ALV_GRID_DISPLAY' FM call to include:
                    i_callback_pf_status_set = 'SET_PF_STATUS' statement.
     2. Create 'SET_PF_STATUS' FORM
     3. Create pf_status (i.e. 'ZNEWSTATUS').
          - It is recommend that you copy standard status'STANDARD' from function group SALV
            and modify it accordingly. ALV standard function codes always start with '&'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_pf_status_set = 'SET_PF_STATUS'   "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
      FORM SET_PF_STATUS                                         *
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZNEWSTATUS'.
                  "Copy of 'STANDARD' pf_status from fgroup SALV
ENDFORM.
double clik on the bold one and design what ever screen u want

How to create a context menu in ALV table cell editor(Webdynpro abap )

Hello Experts,
I am having a problem in creating a context menu in a table cell editor in the ALV table output.I have assigned a 'lta' as the cell editor.But befor assigning the lta as cell editor I have assigned the menu to the lta.But when the view is rendered I can see the lta with the actioned assigned to it.But I cannot see the context menu.
The code snippet below:
"Create menu for each coloumn
create OBJECT lo_menu_actions type CL_SALV_WD_VE_MENU EXPORTING
      id = 'MITM_ACTIONS'.
lo_menu_actions->set_visible( value = abap_true ).
lo_menu_actions->set_visible_fieldname( value = 'ACTIONS' ).
"ADd menu items
CREATE OBJECT lo_menu_item_create type CL_SALV_WD_VE_MENU
exporting
    id = 'MITM_CREATE_EXPRESSION'.
lo_menu_item_create->set_visible( value = abap_true ).
lo_menu_item_create->set_visible_fieldname( value = 'Create' ).
"Add item 1
lo_menu_actions->ADD_ITEM( VALUE = lo_menu_item_create ).
" Set the cell editor for each column cell(link to an action)
LOOP AT lt_node_dec_tab_cols INTO ls_node_dec_tab_cols .
    lv_column_name = ls_node_dec_tab_cols-object_name.
    lr_column = lr_column_settings->get_column( lv_column_name ).
   "Create 'lta' Ui item
    CREATE OBJECT lo_lta TYPE cl_salv_wd_uie_link_to_action.
    lo_lta->set_menu( value = lo_menu_actions ).
    lo_lta->set_text_fieldname( lv_column_name ).
    lr_column->set_cell_editor( lo_lta ).
    IF ls_node_dec_tab_cols-is_result EQ abap_true.
      lr_column->set_cell_design( value =
                  cl_wd_table_column=>e_cell_design-key_medium ).
    ENDIF.
ENDLOOP.

Hi Prakash,
I have not come across this requirement till now to have context menu in a cell editor of alv.
Unfortunately the implementation of method SET_MENU of alv ui elements ( ex: cl_salv_wd_uie_text_view ) is not updating alv configurable table, instead it just stores in a global attribute as string. Hence has no effect on context menu.
If your user is very particular about this requirement of having context menu in cell editor, you can go for a normal table. Because, normal table's cell editor has the property to set the menuID as we do it for other ui elements.
Regards,
Rama

Table Maintenance Generator via program using ALV OO concept

Hi All,
I have a requriement to update the table using OO ALV i.e table maintenance generator program.
My Z table have three fields say.. NEW status, old status and flag.
I have to dispaly the records of the Z table in Matrix format.
for example the records of the Z table is
New status
Old status
Flag
N1
O11
F11
N1
O12
F12
N1
O13
F13
N2
O21
F21
N2
O22
F22
N2
O23
F23
N3
O31
F31
N3
O32
F32
N3
O33
F33
My program have to display the records of the table in matrix format i.e
|   .....       |    O11    | O12 | O13   | O21 | O22   |   O23 | O31   |   O32 | O33 | ..
|     N1    |     F11     |    F12     | F13     |    .....   | .....       | ....        | .....      |   .......     |   ....    | ..   ____________________________________________________________________________________
|    N2     |     .....     | ......      | .......      |   F21   |   F22     | F23      |   ...        |   .....       | ......   | .
|     N3    |     ......   |   .....      | .......   . | .......   | .......     | ....         |   F31     |    F32      | F33   |
The ALV display is dynamic i.e it depends upon the no. of records in the table...
My headings( Row heading and Column heading ) will be the value from table... and the user should be able to change the Flag ... For example when the user change the Flag 'F21' to say 'X',
|   .....       |    O11    | O12 | O13   | O21 | O22   |   O23 | O31   |   O32 | O33 | ..
|     N1    |     F11     |    F12     | F13     |    .....   | .....       | ....        | .....      |   .......     |   ....    | ..   ____________________________________________________________________________________
|    N2     |     .....     | ......      | .......      |   X       |   F22     | F23      |   ...       |   .....       | ......    | .
|     N3    |     ......   |   .....      | .......   .   | ....... | .......     | ....       |   F31      |    F32     |   F33    | .
In the Z table the record is
                 N2          O21        F21
should be changed to
                N2          O21        X
I tried using ALV oo concept....but I can able to display the output as like it is in table ....Not like the one above format....
Can you please help me to resolve it?
Thanx in advance
Sangeetha
Edited by: sangeetha s k on Dec 16, 2008 7:42 AM
Edited by: sangeetha s k on Dec 16, 2008 7:50 AM
Edited by: sangeetha s k on Dec 16, 2008 8:04 AM

Hi,
Go through Following Menu Path
Tcode SE11-> Table Name-> Change.
Utilities-> Table Maintance Generator->Create Maintance.
On Same Screen go to Menu Environment->Modification->Events
Create New Event e.g. 05 , Enter Form Routine Name.
Go to Editor.
and Put Your Logic
e.g.
FORM FILL_DEFAULT.
* Actual Logic for how to get materials list.
ENDFORM.

Updating database table using ALV Grid class CL_ALV_CHANGED_DATA_PROTOCOL

Hi,
I am trying to use class CL_ALV_CHANGED_DATA_PROTOCOL to update a database table from an ALV grid.
I have used program BCALV_EDIT_04 as an example.
I am able to successfully processed inserted or deleted lines using the attributes
MT_DELETED_ROWS
MT_INSERTED_ROWS
but I also want to process modified lines.
I was just wondering whether anyone out there has some example code for this.
I can see that there are the following attributes available
MT_MOD_CELLS
MP_MOD_ROWS.
I would ideally like to use MP_MOD_ROWS rather than MT_MOD_CELLS but it is not clear to me what type MP_MOD_ROWS is.
If anyone has any example code for this sort of thing, please let me know.
Thanks,
Ruby

hi Ruby,
Yes we can use that *data reference variable *.
It is a variable( something comparable to a pointer ) that points to a int table( table with changed contents )
which ll be created at run-time based on the data type ot the internal table that we pass to the parameter it_outtab of method set_table_for_first_display ...
assign er_data_changed->mp_mod_rows->* to a field-symbol and use it...
Check the below code for example -> method refresh_changed_data
screen flow logic.
PROCESS BEFORE OUTPUT.
MODULE pbo.
PROCESS AFTER INPUT.
MODULE pai.
main program.
*       CLASS lcl_event_responder DEFINITION                           *
CLASS lcl_event_responder DEFINITION.
PUBLIC SECTION.
    DATA : ls_changed_cell TYPE lvc_s_modi,
            lv_language     TYPE spras..
    METHODS refresh_changed_data FOR EVENT data_changed
                                  OF cl_gui_alv_grid
                                  IMPORTING er_data_changed
                                            e_ucomm.
ENDCLASS.                    "event_responder DEFINITION
TYPES tt_makt TYPE STANDARD TABLE OF makt.
DATA: go_handler         TYPE REF TO lcl_event_responder,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE tt_makt,
      gs_tableline       TYPE LINE OF tt_makt.
FIELD-SYMBOLS : <changed_rows> TYPE tt_makt.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
LEAVE PROGRAM.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_grid IS NOT BOUND.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = cl_gui_container=>default_screen.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
* raises the 'data_changed' event when we select another cell/any action after changing the data
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_enter ).
CREATE OBJECT go_handler.
SET HANDLER go_handler->refresh_changed_data FOR go_grid.
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
SELECT * FROM makt UP TO 20 ROWS INTO TABLE gt_outtab WHERE spras EQ gv_language.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'MAKT'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    ls_fcat-edit       = abap_true.
    MODIFY pt_fieldcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               "build_fieldcat
*       CLASS event_responder IMPLEMENTATION                          *
CLASS lcl_event_responder IMPLEMENTATION.
METHOD refresh_changed_data.
    ASSIGN er_data_changed->mp_mod_rows->* TO <changed_rows>.
    LOOP AT <changed_rows> INTO gs_tableline.
      BREAK-POINT.
    ENDLOOP.
ENDMETHOD.                    "click
ENDCLASS.                    "event_responder IMPLEMENTATION
Cheers,
Jose.

How to implement row level security using external tables

Hi All Gurus/ Masters,
I want to implement row level security using external tables, as I'm not sure how to implement that. and I'm aware of using it by RPD level authentication.
I can use a filter condition in my user level so that he can access his data only.
But when i have 4 tables in external tables
users
groups
usergroups
webgrups
Then in which table I need to give the filter conditions..
Pl let me know this ...

You pull the Group into a repository variable using a session variable init block, then reference that variable in the data filters either in the LTS directly or in the security management as Filters. You reference it with the syntax VALUEOF("NQ_SESSION.Variable Name")
Hope this helps

Display 2 different structured internal tables in single screen using ALV

Hi,
I have two internal tables. Both has different structures. My requirement is to display both the internal tables in single screen using ALV Grid but NOT using OO ALV Grid display.
Is there any way of spliting the Final ALV display screen into two with two different headers and details as shown below.
Header1 for internal table 1
Data of internal table 1
Header1 for internal table 2
Data of internal table 2
Can anyone suggest a better way to display this.
Regards,
Senthil

hi
first think i can say ALV GRID means only for OO ALV it is not possible to display two I.T. data in singr report screen.
better to use of the fm: REUSE_ALV_BLOCK_LIST_DISPLAY
so that u can display both I.T. data in separate report list under single screen
Check the example programs:
BALVBT01 Testprogram ALV: Block list
BCALV_TEST_BLOCK_LIST Program BCALV_TEST_BLOCK_LIST
Regards,
deepak

Using ALV function with tables

Hello Everyone,
Can anyone pls explain with an example how to use ALV in unicode to write out a table. Since following statements is porducing error:
write:/T510N, 'T510N was changed'.
it gives uncompatible error. In non unicode system it works fine.
Thanks in advanced.

Hi
check this doc regarding Unicode
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

Define F-Code for ALV Button & context menu for ALV table

Hi,
I have some Buttons in ALV Toolbar like for example 'copy row'. Is it in browser environment possible to assign f-code to the button? Like by pushing e.g. F4 the method for 'copy row' action is fired?
Or additionaly, is it possible to define a custom context menu in alv table?
Thanks in advance,
Tan

Hi Tan,
This Functionality is working on..Pelase check this...
Re: How to improve Web accessibility with Function keys
Re: Hot key(Ctrl+F1) for More field help not working
Re: GUI Status?
For help..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b951297a6d2d65e10000000a42189c/content.htm
Cheers,
Kris.
Edited by: kissnas on Jun 21, 2011 11:46 AM

How to display table data without using ALV and table element.

Hi,
        Its possible to display table data without using ALV and table element.
       Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
       (every time i am fetching single row data ),
       But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
       settings and header data etc..things.
      Give solution to display data part..
Regards,
Rakhi.

Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav.

How to fix the width of the column when using alv table

Hi ,
I am displaying the contents in a table. Of course using alv component i displayed the content. Now the problem is the column width is not fixed with value of the table entries( based on the domain length level). As length of field increases or decreses as the length of the content increases or decreases. I wanted to fix the column width whatever be the length of the contents.
Can any one help in this regard ?
Thanks Pons.

Hi,
Please find the code related to your problem.
METHOD configure_alv .
data declaration for column settings
DATA : lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
          lr_col_header        TYPE REF TO cl_salv_wd_column_header,
          lt_columns           TYPE salv_wd_t_column_ref,
          ls_column            TYPE salv_wd_s_column_ref.
data declaration for table settings
DATA : lr_salv_wd_table_ctr TYPE REF TO iwci_salv_wd_table,
         lr_table_settings_ctr TYPE REF TO if_salv_wd_table_settings,
         lr_header_ctr         TYPE REF TO cl_salv_wd_header.
Variables for drop-down and inpufield reference
DATA : lr_drdn_by_key        TYPE REF TO cl_salv_wd_uie_dropdown_by_key,
         lr_input_field        TYPE REF TO cl_salv_wd_uie_input_field,
         l_header              TYPE string.
get ALV Component <CONTRACT_DETAILS>
lr_salv_wd_table_ctr = wd_this->wd_cpifc_payment_detail( ).
wd_this->alv_config_table = lr_salv_wd_table_ctr->get_model( ).
set visible row count
lr_table_settings_ctr ?= wd_this->alv_config_table.
lr_table_settings_ctr->set_visible_row_count( '5' ).
lr_table_settings_ctr->set_read_only( abap_false ).
lr_table_settings_ctr->set_grid_mode( ).
lr_table_settings_ctr->set_width(
    EXPORTING
      value = '980PX' ).
wd_this->alv_config_table->if_salv_wd_table_settings~set_data_check( if_salv_wd_c_table_settings=>data_check_on_cell_event ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_pdf_allowed( abap_false ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_view_list_allowed( abap_false ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_edit_insert_row_allowed( abap_false ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_edit_delete_row_allowed( abap_true ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_export_allowed( abap_false ).
wd_this->alv_config_table->if_salv_wd_std_functions~set_edit_check_available( abap_false ).
CLEAR: l_header.
l_header = wd_assist->if_wd_component_assistance~get_text( '030' ).
lr_header_ctr = lr_table_settings_ctr->get_header( ).
lr_header_ctr->set_text( l_header ).
set text header for Columns.
CLEAR: l_header,lt_columns.
lr_column_settings ?= wd_this->alv_config_table.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
    CASE ls_column-id.
      WHEN 'PAYMENT_METHOD'.
get header details
        lr_col_header = ls_column-r_column->get_header( ).
disable DDIC field label
        CALL METHOD lr_col_header->set_prop_ddic_binding_field
          EXPORTING
            property = if_salv_wd_c_ddic_binding=>bind_prop_text
            value    = if_salv_wd_c_ddic_binding=>ddic_bind_none.
set user defined column header
        l_header = wd_assist->if_wd_component_assistance~get_text( key = '020' ).
        lr_col_header->set_text( l_header ).
        CREATE OBJECT lr_drdn_by_key
          EXPORTING
            selected_key_fieldname = ls_column-id.
        ls_column-r_column->set_cell_editor( lr_drdn_by_key ).
        ls_column-r_column->se_width( '100PX' ).
        lr_drdn_by_key->set_key_visible(
          EXPORTING
            value = abap_true ).
      WHEN OTHERS.
    ENDCASE.
    CLEAR: l_header,ls_column.
ENDLOOP.
ENDMETHOD.
Regards
Manoj Kumar

Implement a table menu using ALV

Similar Messages

Maybe you are looking for