Import Database from dmp file

Dear,
I have export a database in Oracle 10g release 1 then can’t import the database successfully in oracle 9i release 1 because some errors are generated. Please help me how can I import the dump file into oracle 9i database without warnings.

Use this work around
Invoke export (exp) from 9i oracle home to export 10g database then import it in 9i database.
Virag

Similar Messages

Import Data from DMP file

I export data and create a DMP file on daily basis
I import data from this DMP to an other computer but some data import duplicate records.
I want to aviod duplicate records
what should I do

You receive duplicate errors when some unique key in the record (probably but not necessarily the primary key) already exists with a value that duplicates a value already in the database. You have at least 3 options.
1) Ignore the errors. You will get lots of errors and the duplicates will not be imported.
2) Delete all records from the tables before you do the import. Old data will be lost, but you will get no errors.
3) Use fromuser= and touser= to put the data into a different schema then use a merge to update the table data.
By the way this is not the correct forum for this question.

Error occured when importing data from dmp

Hello friends
when i am importing data from dmp file
the following error occured
Please help me to solve this
Error message :
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8PC850 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
Import terminated successfully without warnings.

This is not really an error message but a information about possible character conversion from US7ASCII to WE8PC850 which should NOT be an issue since all US7ASCII characters are in most WExxx character sets.
Message was edited by:
Pierre Forstmann

Problem in importing from dmp file

Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul Chougule

I tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do .

Only to import JAVA CLASS and JAVA SOURCE from .DMP file using IMPDP

hi,
I have a schema X, In that schema some of the *"JAVA CLASS" and "JAVA SOURCE"* objects are missing ..
The procedures ,functions..etc objects were updated at X schema..
I have 1 dmp file of Y schema , containing the missing "JAVA CLASS" and "JAVA SOURCE" s.. Can I import the the same to the schema X using IMPDP
i tried using INCLUDE clause but it is not working
eg:
impdp john1/john1@me11g22 directory=datadump dumpfile=DEVF2WAR.DMP remap_schema=devf2war:john INCLUDE="JAVA CLASS","JAVA CLASS"but error..
ORA-39001: invalid argument value
ORA-39041: Filter "INCLUDE" either identifies all object types or no object types.regards,
jp

Double post: IMPDP to import JAVA CLASS and JAVA SOURCE from .DMP file
Already replied.
Regards
Gokhan

Import a 10g DMP file into a 9.2.0.5 instance

Is it possible to import a 10g DMP file into a 9.2.0.5 instance? Thanks
in advance for your thoughts.

No, do NOT run the catexp.sql from 9i in your 10g db! That was only a valid method with Oracle 6/7 and Oracle 7/8!
Just use the Oracle 9.2 version of exp to create the dumpfile from the 10g database. You can use SQL*Net to connect to the 10g db from your 9.2 server connecting like system/manager@tnsname. Then use 9.2 imp to import the dumpfile into your 9.2 db.
If you have access to Metalink please refer to the following note for full details on compatibility between Oracle releases for exp/imp: 132904.1

How to insert data from *.dmp file to oracle 11g using Oracle SQL Develope

hi
i backup my database using PL/SQL developer and made *.dmp file
how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer 2.1.1.64
and how to make *.dmp file from sql*plus ?
thanks in advance

Pl/Sql developer has a config window, there you choose the exec to do the import/export.
Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer 2.1.1.64. If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use.

Import Database from ver.8i to 8.05

Can I import Database from old version to new version (like from ver. 8i to 8.05)?
If it can, how ?

Yes you can do import from old version to new version without any problem. However new version to old version has some restrictions. You cannot import the export file taken in 8i into 8. In this case you have to take export using oracle 8.0 export utility.

Ssis - import data from flat file to table (sql server 2012)

i have create a ssis for importing data from flat file to table in sql server 2012.
but i got the below error for some column in data flow task.
error: cannot processed because than one code page (950 and 1252)
anyone helps~

Hi,
The issue occurs because the source flat file uses ANSI/OEM – Tranditional Chinese Big5 encoding. When processing the source file, the flat file connection manager uses code page 950 for the columns. Because SQL Server uses code page to perform conversions
between non-Unicode data and Unicode data, the data in the code page 950 based input columns cannot be loaded to code page 1252 based destination columns. To resolve the issue, you need to load the data into a SQL Server destination table that includes Unicode
columns (nchar or nvarchar), and convert the input columns to Unicode columns via Data Conversion or the Advanced Editor for the Flat File Source at the same time.
Another option that may not be that practical is to create a new database based on the Chinese_Taiwan_Stroke_BIN collation, and load the data to non-Unicode columns directly.
Reference:
http://social.technet.microsoft.com/Forums/windows/en-US/f939e3ba-a47e-43b9-88c3-c94bdfb7da58/forum-faq-how-to-fix-the-error-the-column-xx-cannot-be-processed-because-more-than-one-code-page?forum=sqlintegrationservices
Regards,
Mike Yin
TechNet Community Support

Building Database from .dbf files

Hello All,
I had to reinstall oracle software. But I have all the data\control\log files from previous installation.
So my question is, Can I rebuild my database from those files? If so, how?
All the installation directories are same as before. I don't know if this helps but just wanted to provide as much info as possible.
Thanks,
Satish

All your tablespace, user, grants, etc. information is stored within the system datafile, so if you install the Oracle server, then manually recreate the directory structure from your previous database (for example on NT, you'd create d:\oracle\oradata\your_sid\*.dbf
d:\oracle\admin\your_sid\pfile | bdump | etc...) then put the datafiles in the location where the control files says they should be, and your pfile points to the correct control files then it will be OK.
Your pfile will contain the location(s) of your control files. When you nomount the database, the instance will start and the pfile will find the location/locate the control file (this is why you recreate the control file in nomount mode); then when you mount the database, the control files are actually opened and read so the instance can locate the datafiles, identify the tablespaces, etc (this is why you have to put the control files in the location(s) specified in the pfile and datafiles, etc. back in the location specified in the control file). Then opening the database just basically validates everything and opens for use. As long as you don't specify SIZE or REUSE for the datafiles in the control file, and comment out everything after the CHARACTER SET listed in the control file and you still have the datafiles that contain data, you won't need anything like an import. You may need media recovery of some sort or experiment with incomplete recovery (if files are available) and open with resetlogs; but normally if you have an OracleService and you have a pfile, control files, and datafiles, everything will be there (user info and all is stored in the system datafile).
Hope this helps answer some of your questions. Anyway - you can try it and if it fails, you can always start over as long as you have a backup copy of your datafiles and controlfiles and pfile.
Gridahsir

Load into database from a file

hi,
i need to know is there any other means other than sql loader ,i import data into the oracle8i database from a file i.e)if i need to load into a server from a client machine
which does not have oracle 8i client version how could i
do it.kindly help out. thanks in advance.

UTL_FILE
With the UTL_FILE package, your PL/SQL programs can read and write operating system text files. UTL_FILE provides a restricted version of operating system stream file I/O.
UTL_FILE I/O capabilities are similar to standard operating system stream file I/O (OPEN, GET, PUT, CLOSE) capabilities, but with some limitations. For example, you call the FOPEN function to return a file handle, which you use in subsequent calls to GET_LINE or PUT to perform stream I/O to a file. When file I/O is done, you call FCLOSE to complete any output and free resources associated with the file.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_file.htm#ARPLS069
Joel P�rez

How do I import pictures from computer files more than one at a time ?

I recieved the adobe photoshop elements 10 for x mas and no problems with downloading the program but i am having a time importing pictures from my computer files taken from various camaras. the problem is that i can only import pictures from my files 1 at a time. what do i do ? is there a specific tutoral i need to watch ? I know i'm doing something wrong i just don't know, please help Kev

Welcome to the forum.
You should be able to use the Shift, or Ctrl modifier keys, to select multiple files, and Import them.
Now, for Stills, I would strongly suggest that you Scale those Still Images to about the Frame Size of the Project, prior to Import.
Good luck,
Hunt

Import data from excel file

Hello.
Is anybody can help how to import data from excel file to the form created with designer 7.0. Originally there is a script inside the form to populate drop down list and depending from data selected in the ID number drop down list, there will be filled out the description and the prices text fields. But now I have to modify this form with data from excel file, which has more than 30000 lines and put all this data to script is too much.
So, can somebody know how can I after filling the ID number field , populate the description and price text fields with data from excel file corresponding to this ID number ?
This form is used in Adobe reader.
Any comments are welcome.
Regards,
Aivar

Hi
That's what i said in my prev. Post to clear cache... :)
disable your cache from nqsconfig.ini
In cache section of NQSConfig file,
you find
ENABLE = YES;
set to NO
OR
if you are using data ware house as the source for OBIEE,
you know that when ETL is done, so just create iBot to purge cache automatically at that particular intervals,
So that report runs freshly at that time
And what happened to your View Selector question?
Edited by: Kishore Guggilla on Jul 3, 2009 3:52 PM

Import data from excel file - best practice in the CQ?

Hi,
I have question related to importing data from excel file and creates from those data a table in the CQ page. Is inside CQ some OOTB component which provides this kind of functionalities? Maybe somebody implement this kind of functionality or there is best practice to do this kind of functionalities?
Thanks in advance for any answer,
Regards
kasq

You can check a working example package [1] (use your Adobe ID to log in)
After installing it, go to [2] for immediate example.
Unfortunately it only supports the old OLE-2 Excel format (.xls and not .xlsx)
[1] - http://dev.day.com/content/packageshare/packages/public/day/cq540/demo/xlstable.html
[2] - http://localhost:4502/cf#/content/geometrixx/en/company/news/pressreleases/my_personal_bes ts.html

Extra column to be added while importing data from flat file to SQL Server

I have 3 flat files with only one column in a table.
The file names are bars, mounds & mini-bars.
Table 'prd_type' has columns 'typeid' & 'typename' where typeid is auto-incremented and typename is bars, mounds & mini-bars.
I Import data from 3 files to prd_details table. This table has columns 'pid', 'typeid' & 'pname' where pid is auto-incremented and pname is mapped to flat files and get info from them, now i wanted the typeid info to be received from prd_type table.
Can someone please suggest me on this?

You can get it as follows
Assuming you've three separate data flow tasks for three files you can do this
1. Add a new column to pipeline using derived column transformation and hardcode it to bars, mounds or mini-bars depending on the source
2. Add a look task based on prd_type table. use query as
SELECT typeid,typename
FROM prd_type
Use full cache option
Add lookup based on derived column. new column -> prd_type.typename relationship. Select typeid as output column
3. In the final OLEDB destination task map the typeid column to tables typeid column.
In case you use single data flow task you need to include a logic based on filename or something to get the hardcoded type value as bars, mounds or mini-bars in the data pipeline
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Import Database from dmp file

Similar Messages

Maybe you are looking for