Imported animations do not refresh from beginning when viewed again

Hi,
Is there a way to get Captivate movies to refresh and start
on first frame? I want each Cativate slide act like it is the first
time a user has ever been there. Even if an animation lives on a
slide, I want the slide to refresh and start at the beginning each
time. Looping doesn't work.
MORE INFO:
Parent Project ----(contains mulitple mini projects imported
as swf animations. )
I have mini movies (captivate complied swfs imported as
animations) imported on various slides throughout my parent
project. My parent project includes global navigation (BACK and
NEXT buttons ) for the learner to move between slides and then all
these smaller animations get imported.
The first time I move to a slide with one of these
animations, the animation plays fine. However, if I move to another
slide either after the animation ends or even before AND then
return to a slide with animation, I usually get a blank screen.
My users need to be able to move BACK and FORTH through the
course either using navigation I have added or even with the
Captivate controls. they need to be able to view the content on all
slides any time. Even if I add a slide as a Table of contents, if
you access a slide with an animation on it, it will become a blank
screen after the first viewing of the animation.
Any help is greatly appreciated,
This forum rocks!!!
Lisa

Yes the queries in SQLDeveloper was showing me correct results.
But i feel disappointed.. When i went to close SQLDeveloper to try something, it pop me a message to commit/rollback changes.
After i commit them, my app show correct results too.

Similar Messages

Flash Animation Does Not Refresh

I've created a Captivate demo that has an animated flash
segment in the middle of it. This demo was developed for a trade
show and was designed to loop so it can run automatically
throughout the day. Plays great through the first pass. Problem is,
after it has run once, the flash animation does not refresh and
play. Only the blank slides are shown. Same thing happens if you
play the demo then try to rewind to play one of the animated
sequences.
If I hit F5 to refresh the browser it plays. How can I get
this animation file to refresh automatically so it does not require
human intervention to refresh?
Thanks!

Do you have your last side set to go to slide 1 as your way
of repeating? Try setting it to open other project and just point
it at itself, this will make it reopen the project from scratch
(set it to open in the same window). It will have to reload of
course, but should work as designed.

How to add a language that is not preinstalled from beginning

Hi everybody,
Is there a way to add a language in the Forms without installing the developer suite. I tried to change the NLS_LANG in the registry for the developer specific but nothing happen. Thanks for helping.

Thanks for answering my question.
I changed this value as I said in my first post NLS_lang to this your value and to this value AMERICAN_AMERICA.AL32UTF8 but still I'm facing same language. Actually I want to create Form that is Hebrew so I write from right to left and I need the Forms to accept multi languages. The problem is when I change the value in NLS_lang to HEBREW_ISRAEL.IW8MSWIN1255 I only get the Forms in the Run time started from Right to Left and I wanted to be in the same position from left to right and I can read Hebrew but when I write in Forms I only see like this character "??????" and the fonts is installed properly in windows OS.
By the way, when I said the language is not preinstalled from beginning I meant when I installed the Forms but in my operating system I can write Hebrew.
Any other suggestion. Thanks
Edited by: [email protected] on Jun 16, 2009 6:21 AM

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

My notes disappeared from mail when i upgraded to mavericks

my notes disappered from mail when i upgraded to mavericks

Hello question999,
Notes are now located in a separate Notes application.
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Cheers,
Allen

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?

STEVEN1A wrote:
I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?
The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
the finished photo it doesn't look right. It's as the layers have not flattened correctly.
Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

Inserted pages are not of equal size when viewed.

Inserted pages are not of equal size.
when viewed.

[discussion moved to Creating, Editing & Exporting PDFs forum]

Netui:form not refreshing from global menu in portal 10.3

Hi,
I'm working on weblogic portal 10.3 . When clicked on menus jsp page is opening fine. After an action is performed, when clicked on menu again to navigate to the same page form values are getting retained.
Tried to debug, First time the page is requested it does go into begin() of corresponding controller but subsequent requests does not got to begin action and thus retaining the old page again and again.
Any help much appreciated.
Regards
karthic

Hi
that is expected behavior. If you want to override click the portlet in the properties for the portlet you can specify an action as the refresh action (you could specify it as begin if thats what you need or any other action in your pageflow) .
regards
deepak

I have a new laptop - I would like to transfer my music from my ipod to my new computer. I do not want to lose the music that was not purchased from itunes - when I sync I am afraid I will lose all of this music. how do I sync without losing the music on

I have a new laptop and do not want to lose my music on my ipod when I sync. Some of the music is not purchased from itunes - its from my CD collection - last time I lost everything on my ipod and had to manually put all the music back onto itunes.
Please help
Tom

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Problem: 'Could not read from source' when exporting project.

Hi everybody
I am using Adobe Premiere CS4 on my MacBook Pro 15'' (i5 processor, 4 GB RAM, 500 GB Harddisc, 256 MB video memory (high-clockspeed))
Everything works well except of one big thing, every time when i try to export my finished project the Media Encoder tells me always the same thing directly after pushing the start button. 'Could not read from the sorce. Please check if it has been removed or deleted'.
I tried removing any offending plugins, i fixed the disk permissions.. But it all doesnt matter anything.
No matter what i try to export, no matter in what file format. It just doesnt work. I even tried exporting a project which only contains a video file of 5 seconds without anything more but it just doesnt work. Its impossible that i have touched or modified or replaced any source files...
Some help would be very very appreciated!!
Martijn

Welcome to the forum.
Perhaps this Adobe KB Article will be able to help you.
Good luck,
Hunt

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

Determining what site(s) has not refreshed from master database

Is there a way to determine what sites have refreshed at the master level ? Is there a system table or v$view that contains this information ?
I have a master read-only snapshot setup with an oracle 8i master and oracle 8.04 snapshot sites(54). I want to prevent my mlogs from getting too large and determine which sites have not refreshed as an aid to keeping the system healthy.
Any hints/help/pointers to documentation will be greatly appreciated !
Thanks in advance !
Darrell

hi
Working with flex involves learning at least 2 languages, the
flex language both mxml and actionscript and usint it in a
combination, but to have a dynamic site you also need to know a
backend language like C# or VB.NEt, PHP , also is useful to know a
little about Databases, because if you want a dynamic site it will
involve data for sure and where do youget data from? A database.
You will build much of your site in actionscript that is a certain,
because mxml is very good but itself is not sufficent to do
everything you want.

HT2480 email not deleting from server when deleted from ipad

messages are not being deleted from server when deleted from ipad

Hello,
You need to tell us what the email service is. BES? BIS -- and, if so, what email provider? If BES, then see your BES admins. If BIS, then expect it to function in accordance with this KB.
Otherwise, you can try the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Machines not removed from AD when reimaged - Not Installing client- how to resolve client not installing

Hello, i have across a machine that does not have the sccm agent installed, but states on the server that it is installed. Now I am assuming that someone in the team reimaged but did not remove from AD. If this is the case, how do i resolve this? I have
2,000 clients so need to know how widespread this is.
i checked the client logs but there are no ccm/sccm entries. I know i could probably remove from SCCM then run a Discovery Method, but if there are more out there, i need to find a fix potentially. The client is not installed on the image. Boundarys all
set ok.
SCCM 2012 R2
Cheers

You could create a new collection with a query to find out when a clients last heartbeat was or maybe hardware inventory data age? This isn't going to completely solve the problem, but it will narrow down which clients your after. The queries I have below
have an age value of greater than or equal to 30 days. Just increase this obviously to query for clients that haven't reported back in longer amounts of time.
Heartbeat Query
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where AgentName in ("Heartbeat Discovery") and DATEDIFF(day,AgentTime,GetDate())>=30
Hardware Inventory Scan Date Query
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where ResourceId in (select SMS_R_System.ResourceID from SMS_R_System
inner join SMS_G_System_WORKSTATION_STATUS on SMS_G_System_WORKSTATION_STATUS.ResourceID = SMS_R_System.ResourceId where DATEDIFF(dd,SMS_G_System_WORKSTATION_STATUS.LastHardwareScan,GetDate()) > 30)
Its also likely that clients in this situation will be marked by Config Manager as inactive. So you could also just sort by your inactive clients but this again will have a % of error as your inactive clients may be a result of workstations being off your
network for a prolonged period of time or simply turned off.
If you can ping a client that has a hardware inventory age of greater than 30 days but you have a client policy to run it say daily, then you could argue they fall into the category your after.
You could also look at this outside of the Console all together. A possible option could be to use a startup / login script to check for the presence of the Config Manager client and then install it if its not (there are quite a few about). If you're not
comfortable with this, then you could use a startup / login script to check for the presence of the client and write say a hostname or something similar to a text file.
Cheers
Damon

"Some import operations were not performed" from camera import

Greetings,
I've been using LR3 for some time and have never had a problem importing before but starting last week (it worked fine on Tuesday, but failed starting Thursday), attempting to import directly from my Canon 7D has been producing this error dialog:
Importing directly into LR3 has worked with this camera since I got it a year ago so this problem is completely new to me.
I can import directly from the camera with Canon's utility, with Image Capture, and with iPhoto so nothing is wrong with the camera or the usb connection.
After impoting the photos from the camera to a folder on the computer with something other than LR3, I can then import those photos into LR from the disk without problems so nothing is wrong with the photo files themselves.
I have tried formatting the CF card, restarting LR3, and rebooting the computer. Nothing has helped.
Not being able to import directly into LR3 is a pain, and one that I would like to go away. Help?
Thanks!
LR 3.6; OS X 10.6.8; intel iMac
Additional information: I just tried importing from the same camera with LR3 on my MBP and there were no problems so whatever is happening is unique to the instance of LR3 installed on my iMac.

If it is an ordinary folder, then you can use FInder. Click on the folder in question and they press Command-i to bring up the info window for that folder. At the bottom you should see a section labeled "Saring & Permissions" where you will see and have the ability to change what privigles various users and groups have with respect to that folder. Make sure that you can write to it (on the line with your user name it should say "Read & Write", it it doesn't then change it to say that).
If however (as in my case) the issue is with a device file then the solution may be more complicated. But since you don't mention an external drive I suspect that this isn't the case.

Imported animations do not refresh from beginning when viewed again

Similar Messages

Maybe you are looking for