Importing .mod files and posting them as .mov files on YouTube

I'm importing .mod files from my camcorder to iMovie directly. The videos play fine on iMovie. I then directly send them to YouTube (I believe as the QuickTime format .mov). The files import, but fail to process for viewing.
Any suggestions?

First, do not worry, PrE7 has not harmed your files. It is just that it can only get to the Audio portion of those files, so that is all that it can display. They are still intact.
Now, with many file formats, and AVI in particular, much can be inside that file. This ARTICLE will give you some background.
With just the Audio coming through, my guess would be that the files are encoded using either DivX, or Xvid, as this is a very common problem. You can check this out with G-Spot, also mentioned in the linked article.
If the files play on your computer, then you likely have the necessary CODEC, unless you're using MediaPlayer Classic or VLC Player, as they have their own CODEC systems.
Steve's advice to convert these files is the best course of action. You may need to get the CODEC and install it (again, G-Spot will tell you exactly what you will need and if its installed on your computer). I do not know if Prizm has its own CODEC's but would assume that it uses those installed on the computer.
Good luck,
Hunt

Similar Messages

Can anyone help me write a code about coping data from many files and paste them to one file !?

Hello !
As I said in title , I have alot files (e.g. 60 files) and I want to write a code to copy 5 columns (for examples) of special sheet of files and paste them in one file respectively. For perceive it I explained it more below .
Suppose one of my files is simplified as this : http://s000.tinyupload.com/?file_id=00699705919876414523
The name of this file is 2006Oct and assume my excel files are like "2006Oct, 2006Nov,2006Dec,2007Jan ... 2010Dec". At first I should go to "my files" sheet of 2006Oct file and copy columns " A,B,C,D,E,F " that has "PerturbationNumber=1"
respectively and then paste these to a file that is output file and repeat this process for the other files ( 2006Nov and etc ) and paste data in output file sequentially.
I appreciate and look foreward for any help in this issue.
Majid

Try code below
Sub CombineBooks()
Dim wb As Workbook
Dim sourceSht As Worksheet
Dim destSht As Worksheet
Set destSht = ThisWorkbook.Sheets(1)
destSht.Cells.Clear
FolderName = "C:\temp\test\"
file = Dir(FolderName & "*.xlsx")
firstSht = True
Do While file <> ""
Set wb = Workbooks.Open(Filename:=FolderName & file, ReadOnly:=True)
Set sourceSht = wb.Sheets(1)
With sourceSht
sourceLastRow = .Range("A" & Rows.Count).End(xlUp).Row
If .Cells.AutoFilter Then
.Cells.AutoFilter 'turn off autofilter
End If
.Cells.AutoFilter Field:=6, Criteria1:="1"
If firstSht = True Then
Set copyRange = .Range("A1", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destSht.Range("F1") = "FileName"
firstSht = False
destNewRow = 1
Else
Set copyRange = .Range("A2", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destNewRow = destSht.Range("A" & Rows.Count).End(xlUp).Row + 1
End If
copyRange.Copy Destination:=destSht.Range("A" & destNewRow)
LastRow = destSht.Range("A" & Rows.Count).End(xlUp).Row
If destNewRow = 1 Then
destSht.Range("F2:F" & LastRow) = file
Else
destSht.Range("F" & destNewRow & ":F" & LastRow) = file
End If
End With
wb.Close savechanges:=False
file = Dir()
Loop
End Sub
jdweng

JMF does not play sound for .avi file and no video for .mov file

Hi,
I am trying to use JMStudio to transmit media files from one computer to another.
However, when I try to transmit .mov file it only plays audio no video is displayed on other computer.
And when I transmit .avi file I can see the Video on other machine but it does not
play any sound.
I tried using capture devices like - webcam and mic and they work perfectly fine.
Can anyone please tell me the solution for this.
Thank you in advance.

I discovered the same problem too..
I think it is a general Format problem.
When i analyzed the tracks in my .avi and .mov files before rtp streaming with jmf, I found each media containing just 1 track..
This track was a video track, no audio at all.
Other formats I tried, like .mpg, revealed both audio and video tracks, and performed perfectly.
I'm still on more research.. will get the solution to you if u don't find one before I'm done..

IO - Read two image files and put them into one file

Hi,
i have 3 files in all. The two image files and one text file. I need to place the image in the first image file, followed by text in the text file and then the image in the second image file, into one file.
Can anyone tell me how do i go about doing this ?
i tried using fileinputstream and fileoutputstream, which works fine if all the 3 files have text but when the first and the third file have image, the code doesn't give any error but the result file displays only the image from the first file and nothing else.
i am running short of time and need to do this really soon.
if anyone has done anything like this. please let me know,
thanx,
poonam

One approach would be to programmatcally create a single zip/jar file from the three input files. You can use the java.util.zip and java.util.jar packages for this purpose.
The other apprach would be to create a single image by drawing images and text strings on a BufferedImage object.
I think the first approach is preferable because you can easily extract the individual files from the zip/jar file

Can I cut dv files and keep them as dv files?

Hi, I have just spent the last few days importing about 60, 45min VHS PAL analogue tapes through a Canon Mini DV camera into my iMac and out to an external HD. All the files have been saved in .dv format and each is about 9.1 GB is size.
The videos are from 1995 throught to 1998 and are holiday video and as the camera use was in its infancy there was a LOT of very bad and useless shots captured. I didn't have the luxury of stopping and starting the capture, as was not able to capture it through FCP, I had to capture it in one tape at a time as I was digitalising it at the same time using an old application called Vidi.
So now I have all of them there I would like to be able to cut out the rubbish bits, before I bring it into FCP for the serious editing.
What I want though is to still keep the files as .dv files after I have done this and everything I have seen seems to, once I have opened them up, want to save them in a different format.
Has anyone seen an application, with features like QT Pro 7, that I can use that will scrub through the files, cut out the rubbish and save it in its original format?
Thanks
Matt

What you want to do is really very, very simple.
Step 1. Switch on your camera and make sure it is set up to record in SP mode with audio at 16 bits.
Connect your video deck, camera and computer. Switch all devices on before starting FCP.
Step 2. Open FCP. Before you do anything else go to the menu bar...
The Easy setup window opens. Make sure it looks like this...
Click the Setup button when it does.
Back to the menu bar...
The Sequence settings window opens. It should look like this. You can skip the next step if it does...
You have something else? No need to fiddle about. Click that "Load Sequence Preset" button at bottom left.
Click OK to dismiss this window.
You now have the correct settings. Click OK to dismiss the Sequence Settings window.
Go to the File item in the menu bar and choose Log and Capture. Adjust the settings on the right side so that they look like this...
Don't change anything else. Start your tape and click on the Now button at bottom right. To stop a capture, press the esc key. The captured clip will land in FCP's Browser.
You have two basic ways to trim the clip:
1. Load the clip into the Viewer. Mark in (press the i key) on the first image that you want. Mark out (press the o key) on the last image you want.
Edit this clip to the Timeline by doing one of the following: Drag the clip to the Timeline. Drag the clip to the Canvas. Press the F9 key.
There may be other sections of this clip that you also want. Find it and repeat the mark in/out procedure.
2. Place the entire clip on the Timeline. Mark in and out on the section that you don't want. Press the Forward Delete key.
Eventually, you will have a result that you want to save. To save on your computer go to the File menu...
You will see the Save dialog. Make sure it looks like this (obviously your destination will not be the same as mine) and press OK...
Most of all, have fun.

Powershell script to search a network drive for .mdb files and export them to CSV file

Hello all,
I'm trying to search one of our network drives for old .mdb files, I want to write the name, location and date last modified to a csv file.
Get-WmiObject -Class CIM_DataFile -Filter "Drive='S:' And Extension='mdb'
AND ObjFile.drive
AND objFile.FileName
AND objFile.FileSize
AND objFile.LastWriteTime" |
Export-CSV c:\mdb_search\mdbfiles.csv\
Obviously this isn't working or I wouldn't be posting. I've tried many different examples from the net with no joy for now.
Thanks for any help you can offer.

Thanks, that did the job.
Cheers, you're welcome.
How do I get the powershell cursor to return to C:> ?
Should I use "exit" or "break" ?
Neither, the console will return to a prompt when the search has been completed.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

HI GalaxieMusique,
I'm french too, but I'm going to write this post in english so that everyone may understand it
I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
In regards with quicktime, you can download QuickTime 7 here:
http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
Sorry for the english, we french people can make mistakes sometimes
If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

Reading multiple text files and writing them to one text file

Hi,
I'm trying to read a number of text files and write them to a single master file. My program reads all the files but only writes the last one to the master file.
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
// Input/Output Classes
import java.util.Scanner;
import java.io.PrintWriter;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.FileNotFoundException;
import javax.swing.JFrame;
import javax.swing.JTextField;
import javax.swing.JTextArea;
import java.awt.GridLayout;
public class Actor implements ActionListener
public static String DataRoot = "I:\\JAVA\\UBP\\DAT
public static JFrame SW = new JFrame();
public static JTextField txtSPath;
public static JTextArea txtTable;
public void actionPerformed( ActionEvent e )
String Command = e.getActionCommand();
if (Command.equals("Process") )
SetupWin();
ProcessAll();
public void SetupWin()
SW.setTitle("void");
SW.setSize(300,400);
SW.setLayout(new GridLayout(6,1));
txtSPath = new JTextField(40);    SW.add(txtSPath);
txtTable = new JTextArea(10, 40); SW.add(txtTable);
SW.setVisible(true);
public void ProcessAll()
Process("Dunstable","Finance");
Process("Dunstable","Production");
Process("Dunstable","Sales");
public void Process(String Town, String Dept)
String SPath = DataRoot + Town + "
" + Dept + ".txt";
String MPath = DataRoot + "masterFile" + ".txt";
txtSPath.setText(SPath);
String message = "Trying " + SPath;
System.out.println(message);
String SlaveTable=message;
try// if following fails an exception is thrown
Scanner Slave = new Scanner(new FileInputStream(SPath)); // reads slave file
PrintWriter outputStream = null;
outputStream = new PrintWriter(new FileOutputStream(MPath));
while ( Slave.hasNextLine() ) // reads text line by line
//Read and output next record
String PartRecord = Slave.nextLine();
String FullRecord = Town + " " + PartRecord;
System.out.println(FullRecord);
outputStream.println(FullRecord);
Slave.close();
outputStream.close();
txtTable.setText(SlaveTable);
//An Exception Error would be THROWN by above & CAUGHT below
catch(FileNotFoundException e)
message = "Could Not Find " + SPath;
System.out.println(message);     //console
txtSPath.setText(message);     //window
catch(IOException e)
System.out.println("Slave I/O Problem " + SPath);
}Edited by: Ardour on Mar 4, 2008 1:53 PM

I haven't looked closely, but my spidey sense tingles at this:
new FileOutputStream(MPath)This will clobber (erase) the previous contents of the file. Open in append mode:
new FileOutputStream(MPath, true)Of course, if the file exists before you run this code, you will end up append to the original contents. If that is not wanted, consider using File's delete method first.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

HT3775 i have a movie in a .avi file and when i open the file it attempts to convert and gives me an error message

I have a movie in an .avi file and when i open the file the Mac attempts to covert the file and it doens't play. What can I do?

VLC will play avi's, even if the index is broken. IT can repair most broken avi's but will still play them if it can't.
VLC Media Player

Using a container to load several swf files and play them

I need some help. I want to use several swf files and have them be called upon in a container file and play them in sequence. It's a presentation that needs to play thru but still have the ability to stop, click on items, open a popup and then continue on in the presentation. I am building all the individual "chapters" and their "sub-chapters" as swf files, with the hope that I can load them in order. I am relatively new to AS3. Help?

If you will be loading swf files into a container then you will use the Loader class to accomplish that, so give that a looking over in the help documents and see what you can do. If you have a problem getting it to work, post your code and describe what you have done.

Read file and post to MQ

Hi,
I have a senario:
* Read text file from a directory.
* Post the content to MQ.
I dont have any schema for the content of the txt file.
So I used the opaque type in my FileAdapter while reading the text file and posted the data to MQ by using the MQAdapter.
But since content is opaque, data in the MQ is not understandable.
So I want to understand , how I can send the text data to MQ so that it can be understood.

Hi All,
I found the solution for the error which I was mentioning.
I had to import below classes to make it work.
<bpelx:exec import="java.util.*"/>
<bpelx:exec import="java.lang.*"/>
<bpelx:exec import="java.math.*"/>
<bpelx:exec import="java.io.*"/>
<bpelx:exec import="oracle.soa.common.util.Base64Decoder"/>
After importing it my compilation problem is solved.
Now I have new problem :)
I have written below code in Java Embedding for the purpose of decoding
try
String messagePayload =(String)getVariableData("inputMessage");
// decode the message
byte[] decodedBytes = Base64Decoder.decode(messagePayload.getBytes());
String decoded = new String(decodedBytes);
setVariableData("tempBase64EncodedData",decoded);
catch(Exception e)
addAuditTrailEntry(e.toString());
But after this if, I am trying to copy message from "tempBase64EncodedData" to any other variable, it is coming as Empty.
So, my question is
* Am I doing correct thing to assign the decoded message into variable called "tempBase64EncodedData" ?
or
* Decoding iteslef is having some issues ?

Only to import JAVA CLASS and JAVA SOURCE from .DMP file using IMPDP

hi,
I have a schema X, In that schema some of the *"JAVA CLASS" and "JAVA SOURCE"* objects are missing ..
The procedures ,functions..etc objects were updated at X schema..
I have 1 dmp file of Y schema , containing the missing "JAVA CLASS" and "JAVA SOURCE" s.. Can I import the the same to the schema X using IMPDP
i tried using INCLUDE clause but it is not working
eg:
impdp john1/john1@me11g22 directory=datadump dumpfile=DEVF2WAR.DMP remap_schema=devf2war:john INCLUDE="JAVA CLASS","JAVA CLASS"but error..
ORA-39001: invalid argument value
ORA-39041: Filter "INCLUDE" either identifies all object types or no object types.regards,
jp

Double post: IMPDP to import JAVA CLASS and JAVA SOURCE from .DMP file
Already replied.
Regards
Gokhan

Importing .mod files and posting them as .mov files on YouTube

Similar Messages

Maybe you are looking for