Importing txt-files in Labview
Hello,
I am a beginner in programming labview applications so its possible my next question is very easy to program but i dont know how
My question is about importing a txt-file (csv-format) in labview. This txt-file is updated every 10 minutes and I want to visualise the last values every 10 minutes. These values must be written in several indicators (example: 10 coloms -> 10 indicators)
Next is a copy of the txt-file (this one is updated every second).
17/05/2005 0:00:03,-0.2015457,13.99473,88.62115,-108.5054,25.05078,25.98672,26.86344,-8.207347E-03,-0.9357101,-0.9123873,-0.9192927,
17/05/2005 0:00:04,-0.2015457,13.99473,88.62115,-108.5062,25.04688,25.98672,26.86344,-8.207347E-03,-0.9357101,-0.9123873,-0.9192927,
17/05/2005 0:00:05,-0.2015457,13.99473,88.62115,-108.507,25.04297,25.98281,26.86344,-8.207347E-03,-0.9357101,-0.9123873,-0.9192927,
17/05/2005 0:00:06,-0.2015457,13.99473,88.62115,-108.5085,25.04297,25.98281,26.86344,-8.207347E-03,-0.9357101,-0.9123873,-0.9192927,
17/05/2005 0:00:07,-0.1940842,13.99473,88.62115,-108.5085,25.04297,25.97891,26.86344,-8.207347E-03,-0.9357101,-0.9123873,-0.9192927,
I found a template (Load file from and display) thats displays a value from a txt-file.
In the block: "Read LabView Measurement File" its possible to select an option to read from a generic text file, with the right delimiter and decimal point sign (, and .) and when i press the button read file now i see the values in the txt-file. But when I run the program i get a error with possible reason "End of file encountered".
Next I put in the block "Wait until next ms Multiple" put still the same error appears.
So this doesnt work!
How can I solve my problem? Can somebody give me some usefull tips? Has someone else encountered this problem yet? ....
Thank you.
Regards,
Kevin Duerloo
Message Edited by Kevin Duerloo on 09-23-2005 04:49 AM
Somnatic wrote:
Hi Kevin
Do you mind posting your VI ? Or are u only using the supplied example and nothing else ?
Could it be your programm (which creates the file) doesn't close it when it's done creating?
Try rebooting the system and immediately after that try the labview thing. Does the error still occur ?
Hello,
I'm only using the supplied example, the programm closes when it's done creating and rebooting doenst help.
The error means end of file encountered so i think the file isnt updated quick enough for labview. I'm going to try error handling like JorisV said. I will keep you informed if this works or doesnt (I have a lot work so this will not be earlier than tomorrow)
Thank you for the replies.
Kevin
Similar Messages
-
Import txt file into user dictionary
How to import text file into user dictionary through javascript? I can manually import txt file into user dictionary thru "Edit=>Spelling=>User dictionary...". But I don't know how to do it using javascript. Please advise.
Advice? See in some version of the object-model reference under userDictionary. There you'll find a method called addWord(), which looks promising.
Peter -
How to Import .txt files in ORACLE having 300 thousand records
How to Import .txt files in ORACLE having 300 thousand records. Kindly help me in that context
You can make use of Sql*Loader utility and You can also use External table technique for this puspose.
For external table go through this link.
http://www.oracle-base.com/articles/9i/ExternalTables9i.php
Regards -
How to get string (specified by line and column) from txt file with labview
Hi everyone
How to get string (specified by line and column) from txt file with labview
thx
Solved!
Go to Solution.As far as I know, a text file has no columns. Please be more specific. Do you mean something like the 5th word on line 4, where words are separated by a space, and lines are separated by a newline character? You could the Read from Spreadsheet String function and set the delimiter to a space. This will produce a 2D array of strings. Then use index array and give the line number and column number.
- tbob
Inventor of the WORM Global -
I want to import txt file into a QT Movie. But under the pulldown menu is not a import icon.
How can I import the text file.So once you choose open file what do you do from there? How do I get the text file into the movie?
-
I have an Arinc signal that I have decoded into each of its digital I/Os. Since I have over 150 I/Os I needed a way to sort and do a quick report on them.
I have three categories.
1. Stayed =1 throughout test
2. Stayed = 0 throughout test
3. Changed either from 0 --> 1 or 1-->0 during the test.
I want to just put a list of the signals for each of these categories into my report.
I have created a txt file for these to go in, but how do I import that into my report?
Or is there an easier way?
Here is an example of my code...
'HCM1
'HCM1 Label 104 decode - Untitled 3
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_HSOV_A1_CLOSED"")= GetB (Ch(""[1]/Untitled 3""),0)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_HSOV_A2_CLOSED"")= GetB (Ch(""[1]/Untitled 3""),1)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_RUNNING"")= GetB (Ch(""[1]/Untitled 3""),2)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_SYS_A_HI_TEMP"")= GetB (Ch(""[1]/Untitled 3""),4)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_SYS_A_LO_PRS"")= GetB (Ch(""[1]/Untitled 3""),7)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_LO_PRS"")= GetB (Ch(""[1]/Untitled 3""),12)")
Call Calculate ("Ch(""HCM1_104/HCM_1_CAS_HPP_A_HI_TEMP"")= GetB (Ch(""[1]/Untitled 3""),13)")
'HCM1 Label 105 decode - Untitled 4
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_HSOV_A1_FAIL"")= GetB (Ch(""[1]/Untitled 4""),0)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_HSOV_A2_FAIL"")= GetB (Ch(""[1]/Untitled 4""),1)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_EDP_A1_FAIL"")= GetB (Ch(""[1]/Untitled 4""),2)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_EDP_A2_FAIL"")= GetB (Ch(""[1]/Untitled 4""),3)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_SYS_A_PRS_FLT_CLG"")= GetB (Ch(""[1]/Untitled 4""),6)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_SYS_A_RET_FLT_CLG"")= GetB (Ch(""[1]/Untitled 4""),7)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_EDP_A1_FLT_CLG"")= GetB (Ch(""[1]/Untitled 4""),8)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_EDP_A2_FLT_CLG"")= GetB (Ch(""[1]/Untitled 4""),9)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_LO_QTY"")= GetB (Ch(""[1]/Untitled 4""),11)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_FAIL"")= GetB (Ch(""[1]/Untitled 4""),12)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_HPP_A_CDF_FLT_CLG"")= GetB (Ch(""[1]/Untitled 4""),14)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_IV_A_FAIL"")= GetB (Ch(""[1]/Untitled 4""),15)")
Call Calculate ("Ch(""HCM1_105/HCM_1_FLT_IV_A_FAIL_LOCAL"")= GetB (Ch(""[1]/Untitled 4""),16)")
'HCM1 Label 106 decode - Untitled 5
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_PF_DPI_FAIL"")= GetB (Ch(""[1]/Untitled 5""),0)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_RF_DPI_FAIL"")= GetB (Ch(""[1]/Untitled 5""),1)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_EDP_A1_CDF_DPI_FAIL"")= GetB (Ch(""[1]/Untitled 5""),2)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_EDP_A2_CDF_DPI_FAIL"")= GetB (Ch(""[1]/Untitled 5""),3)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_EDP_A1_PS_FAIL"")= GetB (Ch(""[1]/Untitled 5""),4)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_EDP_A2_PS_FAIL"")= GetB (Ch(""[1]/Untitled 5""),5)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_PX_FAIL"")= GetB (Ch(""[1]/Untitled 5""),6)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_TX_FAIL"")= GetB (Ch(""[1]/Untitled 5""),7)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_SYS_A_QX_FAIL"")= GetB (Ch(""[1]/Untitled 5""),8)")
Call Calculate ("Ch(""HCM1_106/HCM_1_HSOV_A1_IND_FAIL"")= GetB (Ch(""[1]/Untitled 5""),10)")
Call Calculate ("Ch(""HCM1_106/HCM_1_HSOV_A2_IND_FAIL"")= GetB (Ch(""[1]/Untitled 5""),11)")
Call Calculate ("Ch(""HCM1_106/HCM_1_EDP_A1_FAIL"")= GetB (Ch(""[1]/Untitled 5""),12)")
Call Calculate ("Ch(""HCM1_106/HCM_1_EDP_A2_FAIL"")= GetB (Ch(""[1]/Untitled 5""),13)")
Call Calculate ("Ch(""HCM1_106/HCM_1_FLT_FV_A_FAIL"")= GetB (Ch(""[1]/Untitled 5""),14)")
Call Calculate ("Ch(""HCM1_106/HCM_1_HSOV_A1_RELAY_FAIL"")= GetB (Ch(""[1]/Untitled 5""),15)")
Call Calculate ("Ch(""HCM1_106/HCM_1_HSOV_A2_RELAY_FAIL"")= GetB (Ch(""[1]/Untitled 5""),16)")
Dim k, m, pMyChn, result, ArincTrue, intMyHandle01, intMyHandle02,intMyHandle03,intMyText, intMyError01, intMyError02, intMyError03
intMyHandle01 = TextFileOpen("C:\ArincTrue.txt",tfCreate or tfWrite)
intMyHandle02 = TextFileOpen("C:\ArincFalse.txt",tfCreate or tfWrite)
intMyHandle03 = TextFileOpen("C:\ArincChange.txt",tfCreate or tfWrite)
For k = 2 to 4
For m = 1 to GroupChnCount(k)
Set pMyChn = Data.Root.ChannelGroups(k).Channels(m)
Result = ChnValMax(pMyChn)-ChnValMin(pMyChn)
If Result = 0 and ChnValMax(pMyChn) > 0 then
intMyText= TextfileWriteLn(intMyHandle01, pMyChn.Name)
elseif result= 0 and ChnValMax(PMyChn) = 0 then
intMyText= TextfileWriteLn(intMyHandle02, pMyChn.Name)
else
intMyText= TextfileWriteLn(intMyHandle03, pMyChn.Name)
End If
Next
Next
intMyError01 = TextFileClose(intMyHandle01)
intMyError02 = TextFileClose(intMyHandle02)
intMyError03 = TextFileClose(intMyHandle03)
Solved!
Go to Solution.Hi 2Pale4TX,
You can't easily reference the content of an ASCII file. Instead, I suggest you make a new Group of 3 text channels that you can drag onto a REPORT table.
Dim k, m, z, ResultsGroup, TrueChannel, FalseChannel, ChangeChannel, Group, Channel, Result
Set ResultsGroup = Data.Root.ChannelGroups.Add("Results")
Set TrueChannel = ResultsGroup.Channels.Add("ArincTrue", DataTypeString)
Set FalseChannel = ResultsGroup.Channels.Add("ArincFalse", DataTypeString)
Set ChangeChannel = ResultsGroup.Channels.Add("ArincChange", DataTypeString)
For k = 2 to 4
Set Group = Data.Root.ChannelGroups(k)
For m = 1 to Group.Channels.Count
Set Channel = Group.Channels(m)
ChMax = CMax(Channel)
ChMin = CMin(Channel)
Result = ChMax - ChMin
If Result = 0 and ChMax > 0 Then
z = TrueChannel.Size + 1
TrueChannel(z) = Channel.Name
Elseif Result = 0 and ChMax = 0 Then
z = FalseChannel.Size + 1
FalseChannel(z) = Channel.Name
Else
z = ChangeChannel.Size + 1
ChangeChannel(z) = Channel.Name
End If
Next ' m
Next ' k
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
There are no readers registered for the txt type - Issue importing txt file
Hello guys,
I am working on SQL developer 3.2. and Oracle database 11g. I am trying to import a txt file with only two columns and 100 rows separated with a pipe. I can import the same file if its in *.CSV or *.xls format. I right click on the table > Import table > Choose the *.txt file > and then I get a message "There are no readers registered for the txt type". Why? Where do I get the reader? I am using the same exact method and the same exact data to import using a different file format and I do not get any errors. The wizard comes up and I am ready to load. I have scoured through this forum for a solution and I could not find one. Any help is very much appreciated.
Thank you!It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.
-
Bullet character in imported TXT file
I am importing an external TXT file into a dynamic text box
in my SWF file using Actionscript (see AS below).
I want the text to read as a bulleted list.
I tried typing the bullet character (Option + 8 on Mac), but
this gave me Yen symbols when I previewed the movie.
Then I tried the HTML code <UL>, <LI>, etc.,
which just showed exactly as typed when previewed.
I also tried the HTML code for this character (•)
but this also showed exactly as typed when previewed.
How do I create the bullet character in Flash? Is there a
reference for creating all types of special characters in Flash?
Or is there a simple way to create a bulleted list?
Many Thanks,
Nathan
My system specifications:
Mac OS 10.4.10
Flash CS3for html content you would need to use external_txt.htmlText
= event.target.data;. also embed the basic font and the specific
"•" character
if you wanted to go the character code route you would have
to strip the character code from the string first and replace it
with a bullet. -
Modify extension of txt file under labview
I've got a.log file or .txt file than i copy in new directory and i would like to use this file under excel, but I don't know how can i change the extension under Labview???
I hope than you understand me.
Thank you,drikc,
avoid asking several time (3 !!!) the same question on this forum !
tst,
your previous icon was a disaster, but this one is even worse !..
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Can't Import txt file in QTPro
I am trying to add Chapter Markers to a quicktime movie prior to bringing it into iDVD. Following the instructions in "QuickTime Player Help" section I made a txt file with chapter titles and timecode in the correct script. The "help" sheet tells me to "Save the text file and import it into QuickTime Player." Great- but there is no "import" choice in the drop down menu under "File."
I have deleted QuickTime and reimported it three times and tried re-purchasing QTPro. What am I not doing correctly?
Thanks,
A.
Dual 1 GHz PowerPC G4 Mac OS X (10.3.9) 1.5 GB SDRAM
Dual 1 GHz PowerPC G4Kirk-
I did write as plain text but found my own error elsewhere. I had inadvertantly added a carriage space after each chapter marker. When I brought them into QuickTime the first time, these carriage returns created a space for a new chapter heading after each real chapter heading. When I applied time code placements to my real titles, I did not understand I had also created bogus, blank titles. These had non-sense time code stamps and so QuickTime rejecting the file.
"Open File" replaces the "Import File" command in this version but all is well. User error.
Thanks,
A.G. -
Hi all.
I'm on SQL Developer 3.1.07.
I have a little question: is it possible to import a txt file using sql developer?
When I try it, it gives me this error:
no process reading recorded for the type txt
How can I load data into my database, txt file in particular, using sql developer??
Thanks all for collaboration,
Fabrizio Delli PriscoliYou may be able to import a text file if it is formatted in a way that meets the requirements of a delimited file. You can try renaming the file to have a .dsv extension (delimiter separated value). This will allow you to open the file with the import wizard. On the first page, select a delimiter that seems appropriate depending on the contents of the file (space, tab?).
However, you may find that the columns can not be detected correctly by the import wizard because the fields are not marked by a fixed delimiter, which is a requirement of the import wizard.
Good luck.
Joyce Scapicchio
SQL Developer Team -
Hi all,
I was created table A with A1 and A2 columns.
create table A (number A1, varchar A2).
I have file.txt from my desktop like
1,elementA
2,elementKK
3,elementMM
1000,element YIIO
How to import this file into table A with A1 have number and A2 have elements
from txt file using sql plus editor?
Thanks in advanceHi,
Below example using External Table Feature.
create a directory on the server where your database is installed and copy your data file(text file) in that directory. In the below example Oracle directory name is "text_file" and the physical directory on the server is "D:\TEXT_FILE\". The file name of data file is "data.txt".
create directory text_file as 'D:\TEXT_FILE\';
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
now you can use
insert into a select * from load_a;
Sachin Chauhan -
Importing .m files to LabVIEW
Is it possible to import .m files of Matlab, directly in to LabVIEW?
Hai ITA,
c this link
Thanks,
Mathan -
Special Characters and Importing .TXT files
I am trying to import a .txt file that has special Characters. The ñ works correct, but the ® does not import correctly. Any Ideas?
What is strange is that if I open the .txt file up on a windows machine the ® is there.
When placing your text file, check the "Import Options" box. You can choose platform, encoding, and, um, um, something else. But you need to specify Windows platform, I think. You might need to specify your encoding as well. You can use an app like TextWrangler or Ultraedit or something else to figure out your text encoding. Or you can use the Drunkard's Walk algorithm: just keep trying encodings randomly until you find the one that works. -
Automator-How to batch import txt files into excel
Hi
I have been using Automator to import hundreds of text files into one excel workbook using the "Import Text files to Excel Workbook" action. Automator works great for all files that are tab delimited. However I have another set of data that are output with a varying amount of spaces between each column. I cannot change the way they are output. Automator gives me the option of choosing "space" as a delimiter, but it wont give me the option to "Treat consecutive delimiters as one" that Import within excel does. I also tried to record my actions within excel many times but it didn't work even with just one file. So what I need is a way to get these text files into one excel workbook as separate worksheets with the data separated correctly into columns.
Any help would be great!I'm confused by the "I cannot change the way they are output" line: What's stopping you from reimporting them into excel and resaving them as tab delimited? Converting from fixed-format to tab-delimited is always a bit of a pain (it involves chunking each line to the correct sized bits and then stripping whitespace from the end - doable in applescript and shell scripting, but a headache to get right); no sense remaking the wheel if you can get Excel to do it for you.
Maybe you are looking for
-
Script needed to print complete contents in scrolling text field Acrobat Pro 9 (MAC)
I've seen this question several times in my search but no real solution. My client wants a form with text fields that only show 1-2 lines when viewed on-screen but are scrollable so that the user can input a lot of text. I had no problem creating tha
-
The install went fine but when I go to load the program I get the an error saying I am missing required plugins (artconverters.aip, pdf format.aip, & rasterize.aip). If I open the package content in finder I can clearly see these files there. I am ru
-
How to created sales order through xi in CRM...?
Hi My scenario is like this I have one purchase order web application. when i click submit request will go to xi throgh http request. After it receiving the request xi will take the purchase order and based on the purchase order it will create a sale
-
Hello, i have to put in as a source a tab delimited file - can nothing do about it, because our report generates it this way. So I have no idea, how to enter kind of \t into the file component delimiter tab. I can enter some 1 char things like ",", "
-
Event structure to detect value change of a control within a cluster in an array
I have 1D array that contains a cluster. The cluster contains a numeric and a boolean control. If the user starts to edit the numeric control value i would like to call one subVI, and if the boolean control value is changed, call a different subVI. T