Improve the query performance
Hi, I need help for improving query performance..
I have a query in which i am joining 2 tables, join after some aggregation. Both table has more than 50 million record.
There is no index created on these table,both tables are loaded after truncation. So is it required to create index on this table before joining? The query status was showing 'suspended' since it was running for long time. For temporary purpose, i just executed
the query multiple times by changing month filter each times.
How can i improve this instead of adding month filter and running multiple times
Hi Nikkred,
According to your description, you are joining 2 table which contain more than 50 million records. Now what you want is improving query performance, right?
Query tuning is not an easy task. Basically it depends on three factors: your degree of knowledge, the query itself and the amount of optimization required. So in your scenario, you can post your detail query, so that you can get more help. Besides, you
can create index on your table which can improve the performance. Here are some links about performance tuning tips for you reference.
http://www.mssqltips.com/sql-server-tip-category/9/performance-tuning/
http://www.infoworld.com/d/data-management/7-performance-tips-faster-sql-queries-262
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr -
How to improve the query performance
ALTER PROCEDURE [SPNAME]
@Portfolio INT,
@Program INT,
@Project INT
AS
BEGIN
--DECLARE @StartDate DATETIME
--DECLARE @EndDate DATETIME
--SET @StartDate = '11/01/2013'
--SET @EndDate = '02/28/2014'
IF OBJECT_ID('tempdb..#Dates') IS NOT NULL
DROP TABLE #Dates
IF OBJECT_ID('tempdb..#DailyTasks') IS NOT NULL
DROP TABLE #DailyTasks
CREATE TABLE #Dates(WorkDate DATE)
--CREATE INDEX IDX_Dates ON #Dates(WorkDate)
;WITH Dates AS
SELECT (@StartDate) DateValue
UNION ALL
SELECT DateValue + 1
FROM Dates
WHERE DateValue + 1 <= @EndDate
INSERT INTO #Dates
SELECT DateValue
FROM Dates D
LEFT JOIN tb_Holidays H
ON H.HolidayOn = D.DateValue
AND H.OfficeID = 2
WHERE DATEPART(dw,DateValue) NOT IN (1,7)
AND H.UID IS NULL
OPTION(MAXRECURSION 0)
SELECT TSK.TaskID,
TR.ResourceID,
WC.WorkDayCount,
(TSK.EstimateHrs/WC.WorkDayCount) EstimateHours,
D.WorkDate,
TSK.ProjectID,
RES.ResourceName
INTO #DailyTasks
FROM Tasks TSK
INNER JOIN TasksResource TR
ON TSK.TaskID = TR.TaskID
INNER JOIN tb_Resource RES
ON TR.ResourceID=RES.UID
OUTER APPLY (SELECT COUNT(*) WorkDayCount
FROM #Dates
WHERE WorkDate BETWEEN TSK.StartDate AND TSK.EndDate)WC
INNER JOIN #Dates D
ON WorkDate BETWEEN TSK.StartDate AND TSK.EndDate
-------WHERE TSK.ProjectID = @Project-----
SELECT D.ResourceID,
D.WorkDayCount,
SUM(D.EstimateHours/D.WorkDayCount) EstimateHours,
D.WorkDate,
T.TaskID,
D.ResourceName
FROM #DailyTasks D
OUTER APPLY (SELECT (SELECT CAST(TaskID AS VARCHAR(255))+ ','
FROM #DailyTasks DA
WHERE D.WorkDate = DA.WorkDate
AND D.ResourceID = DA.ResourceID
FOR XML PATH('')) AS TaskID) T
LEFT JOIN tb_Project PRJ
ON D.ProjectID=PRJ.UID
INNER JOIN tb_Program PR
ON PRJ.ProgramID=PR.UID
INNER JOIN tb_Portfolio PF
ON PR.PortfolioID=PF.UID
WHERE (@Portfolio = -1 or PF.UID = @Portfolio)
AND (@Program = -1 or PR.UID = @Program)
AND (@Project = -1 or PRJ.UID = @Project)
GROUP BY D.ResourceID,
D.WorkDate,
T.TaskID,
D.WorkDayCount,
D.ResourceName
HAVING SUM(D.EstimateHours/D.WorkDayCount) > 8
hi..
My SP is as above..
I connected this SP to dataset in SSRS report..as per my logic..Portfolio contains many Programs and Program contains many Projects.
When i selected the ALL value for parameters Program and Project..i'm unable to get output.
but when i select values for all 3 parameters i'm getting output. i took default values for paramters also.
so i commented the where condition in SP as shown above
--------where TSK.ProjectID=@Project-------------
now i'm getting output when selecting ALL value for parameters.
but here the issue is performance..it takes 10sec to retrieve for single project when i'm executing the sp.
how can i create index on temp table in this sp and how can i improve the query performance..
please help.
thanks in advance..
luckyDidnt i provide you solution in other thread?
ALTER PROCEDURE [SPNAME]
@Portfolio INT,
@Program INT,
@Project INT
AS
BEGIN
--DECLARE @StartDate DATETIME
--DECLARE @EndDate DATETIME
--SET @StartDate = '11/01/2013'
--SET @EndDate = '02/28/2014'
IF OBJECT_ID('tempdb..#Dates') IS NOT NULL
DROP TABLE #Dates
IF OBJECT_ID('tempdb..#DailyTasks') IS NOT NULL
DROP TABLE #DailyTasks
CREATE TABLE #Dates(WorkDate DATE)
--CREATE INDEX IDX_Dates ON #Dates(WorkDate)
;WITH Dates AS
SELECT (@StartDate) DateValue
UNION ALL
SELECT DateValue + 1
FROM Dates
WHERE DateValue + 1 <= @EndDate
INSERT INTO #Dates
SELECT DateValue
FROM Dates D
LEFT JOIN tb_Holidays H
ON H.HolidayOn = D.DateValue
AND H.OfficeID = 2
WHERE DATEPART(dw,DateValue) NOT IN (1,7)
AND H.UID IS NULL
OPTION(MAXRECURSION 0)
SELECT TSK.TaskID,
TR.ResourceID,
WC.WorkDayCount,
(TSK.EstimateHrs/WC.WorkDayCount) EstimateHours,
D.WorkDate,
TSK.ProjectID,
RES.ResourceName
INTO #DailyTasks
FROM Tasks TSK
INNER JOIN TasksResource TR
ON TSK.TaskID = TR.TaskID
INNER JOIN tb_Resource RES
ON TR.ResourceID=RES.UID
OUTER APPLY (SELECT COUNT(*) WorkDayCount
FROM #Dates
WHERE WorkDate BETWEEN TSK.StartDate AND TSK.EndDate)WC
INNER JOIN #Dates D
ON WorkDate BETWEEN TSK.StartDate AND TSK.EndDate
WHERE (TSK.ProjectID = @Project OR @Project = -1)
SELECT D.ResourceID,
D.WorkDayCount,
SUM(D.EstimateHours/D.WorkDayCount) EstimateHours,
D.WorkDate,
T.TaskID,
D.ResourceName
FROM #DailyTasks D
OUTER APPLY (SELECT (SELECT CAST(TaskID AS VARCHAR(255))+ ','
FROM #DailyTasks DA
WHERE D.WorkDate = DA.WorkDate
AND D.ResourceID = DA.ResourceID
FOR XML PATH('')) AS TaskID) T
LEFT JOIN tb_Project PRJ
ON D.ProjectID=PRJ.UID
INNER JOIN tb_Program PR
ON PRJ.ProgramID=PR.UID
INNER JOIN tb_Portfolio PF
ON PR.PortfolioID=PF.UID
WHERE (@Portfolio = -1 or PF.UID = @Portfolio)
AND (@Program = -1 or PR.UID = @Program)
AND (@Project = -1 or PRJ.UID = @Project)
GROUP BY D.ResourceID,
D.WorkDate,
T.TaskID,
D.WorkDayCount,
D.ResourceName
HAVING SUM(D.EstimateHours/D.WorkDayCount) > 8
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How to improve the query performance or tune query from Explain Plan
Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
21 FILTER
16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
1 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
243 bytes sent via SQL*Net to client
349 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
SID
310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
VALUE
163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID CHILD_NUMBER
04mpgrzhsv72w 0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
Please verify value of SQL_ID and CHILD_NUMBER;
It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
PM: PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD: Current where clause predicates in SEL$1 (#0) :
REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
: call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
Select Statement taking more time.How to improve the query performance.
SELECT DISTINCT ORDERKEY, SUM(IMPRESSIONCNT) AS ActualImpressions ,SUM(DiscountedSales)AS ActualRevenue ,SUM(AgencyCommAmt) as AgencyCommAmt
,SUM(SalesHouseCommAMT) as SalesHouseCommAMT
--INTO Anticiapted_ADXActualsMeasures
FROM AdRevenueFact_ADX ADx WITH(NOLOCK)
Where FiscalMonthkey >=201301 and Exists (Select 1 from Anticipated_cdr_AX_OrderItem OI Where Adx.Orderkey=Oi.Orderkey)
GROUP BY ORDERKEY
Clustered indexes on orderkey,fiscalmonthkey and orderkey in AdRevenueFact_ADX(contain more than 170 million rows)
thanksAs mentioned by Kalman, if your clustered index starts with Orderkey, then this query will require a full table scan. If it is an option to change the clustered index in such a way that FiscalMonthkey is the leading column, then only the data of the last
two year has to be queried.
In addition, you should have a look at the indexes of table Anticipated_cdr_AX_OrderItem. Ideally, there is a nonclustered index on Orderkey.
To get better advice, please post the query plan and list all available indexes of these tables.
Finally, an off topic remark: it is a good practice to keep consistent spelling of object names, and to keep the same spelling as their declaration. Your query would cause serious problems if the database is ever run with case sensitive collation.
Gert-Jan -
How to eleminate the co-releated Subquery to improve the query performance
Please find the query below which takes long time to fetch the records.
SQL> SET LINE 120
SQL> EXPLAIN PLAN FOR select *
2 from KEMP_SRC a1
3 where ('MOFF' is null or eq_name = 'MOFF')
4 and
5 is_ad_hoc <> 1
6 and (pb_proc_id is null
7 or pb_proc_id in (select proc_id from KEMP_CONFIG where frequency_type <> -1)
8 )
9 and KEMPUtility.DTTM(end_dt, end_tm) in (select max(KEMPUtility.DTTM(end_dt, end_tm))
10 from KEMP_SRC a2
11 where a2.eq_name = a1.eq_name
12 and (a2.pb_proc_id = a1.pb_proc_id or (a2.pb_proc_id is null and a1.pb_proc_id is null))
13 and a2.is_ad_hoc <> -1 -- repeating case
14 group by eq_name, pb_proc_id
15 );
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY());
PLAN_TABLE_OUTPUT
Plan hash value: 2624956131
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 96 | 69399 (3)| 00:13:53 |
|* 1 | FILTER | | | | | |
|* 2 | TABLE ACCESS FULL | KEMP_SRC | 2896 | 271K| 124 (2)| 00:00:02 |
|* 3 | TABLE ACCESS FULL | KEMP_CONFIG | 1 | 26 | 2 (0)| 00:00:01 |
|* 4 | FILTER | | | | | |
| 5 | HASH GROUP BY | | 1 | 35 | 125 (3)| 00:00:02 |
PLAN_TABLE_OUTPUT
|* 6 | TABLE ACCESS FULL| KEMP_SRC | 364 | 12740 | 124 (2)| 00:00:02 |
Predicate Information (identified by operation id):
1 - filter(("PB_PROC_ID" IS NULL OR EXISTS (SELECT /*+ */ 0 FROM
"KEMP_CONFIG" "KEMP_CONFIG" WHERE "PROC_ID"=:B1 AND
"FREQUENCY_TYPE"<>(-1))) AND EXISTS (SELECT /*+ */ 0 FROM "KEMP_SRC" "A2" WHERE
"A2"."EQ_NAME"=:B2 AND ("A2"."PB_PROC_ID"=:B3 OR :B4 IS NULL AND "A2"."PB_PROC_ID" IS
NULL) AND "A2"."IS_AD_HOC"<>(-1) GROUP BY "EQ_NAME","PB_PROC_ID" HAVING
PLAN_TABLE_OUTPUT
"KEMPUtility"."DTTM"(:B5,:B6)=MAX("KEMPUtility"."DTTM"("END_DT","END_TM"))))
2 - filter("EQ_NAME"='BILAN_MAZOUT_BFOE' AND "IS_AD_HOC"<>1)
3 - filter("PROC_ID"=:B1 AND "FREQUENCY_TYPE"<>(-1))
4 - filter("KEMPUtility"."DTTM"(:B1,:B2)=MAX("KEMPUtility"."DTTM"("END_DT","END_TM")))
6 - filter("A2"."EQ_NAME"=:B1 AND ("A2"."PB_PROC_ID"=:B2 OR :B3 IS NULL AND
"A2"."PB_PROC_ID" IS NULL) AND "A2"."IS_AD_HOC"<>(-1))
28 rows selected.When i comment the reference to a1 in the subquery , then the cost drastically reduced .
select *
2 from KEMP_SRC a1
3 where ('MOFF' is null or eq_name = 'MOFF')
4 and
5 is_ad_hoc != 1
6 and (pb_proc_id is null
7 or pb_proc_id in (select proc_id from KEMP_CONFIG where frequency_type -1)
8 )
9 and KEMPUtility.DTTM(end_dt, end_tm) in (select max(KEMPUtility.DTTM(end_dt, end_tm))
10 from KEMP_SRC a2
11 where
-- a2.eq_name = a1.eq_name
12 -- and (a2.pb_proc_id = a1.pb_proc_id or (a2.pb_proc_id is null and a1.pb_proc_id is null))
13 --and
a2.is_ad_hoc != -1 -- repeating case
14 group by eq_name, pb_proc_id
15 );
PLAN_TABLE_OUTPUT
Plan hash value: 3739658629
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 78 | 8190 | 249 (3)| 00:00:03 |
|* 1 | FILTER | | | | | |
|* 2 | HASH JOIN | | 203 | 21315 | 249 (3)| 00:00:03 |
| 3 | VIEW | VW_NSO_1 | 7 | 63 | 125 (3)| 00:00:02 |
| 4 | HASH UNIQUE | | 7 | 245 | 125 (3)| 00:00:02 |
| 5 | HASH GROUP BY | | 7 | 245 | 125 (3)| 00:00:02 |
PLAN_TABLE_OUTPUT
|* 6 | TABLE ACCESS FULL| KEMP_SRC | 2896 | 98K| 124 (2)| 00:00:02 |
|* 7 | TABLE ACCESS FULL | KEMP_SRC | 2896 | 271K| 124 (2)| 00:00:02 |
|* 8 | TABLE ACCESS FULL | KEMP_CONFIG | 1 | 26 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter("PB_PROC_ID" IS NULL OR EXISTS (SELECT /*+ */ 0 FROM
"KEMP_CONFIG" "KEMP_CONFIG" WHERE "PROC_ID"=:B1 AND
"FREQUENCY_TYPE"<>(-1)))
PLAN_TABLE_OUTPUT
2 - access("$nso_col_1"="KEMPUTILITY"."DTTM"("END_DT","END_TM"))
6 - filter("A2"."EQ_NAME"='BILAN_MAZOUT_BFOE' AND "A2"."IS_AD_HOC"<>(-1))
7 - filter("EQ_NAME"='BILAN_MAZOUT_BFOE' AND "IS_AD_HOC"<>1)
8 - filter("PROC_ID"=:B1 AND "FREQUENCY_TYPE"<>(-1)) -
Hello gurus,
We do use RSRT, ST03(expert mode) to check if a query is running slowly. what actually do we check there and how?
Can anyone please explain me how its done.
Thanks in advance
S NHi SN,
You need to check the DB time taken by the queries and the summarization ratio for the queries. As a rule of thumb if the summarization ration > 10 and the database time > 30% then creating an aggregate will improve the query performance.
BY summarization ration i mean ratio between the number of records read from the cube to the number of records displayed in the report.
Thx,
Soumya -
How Can we improve the report performance..?
Hi exports,
I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
Please give the answer in detailed way.First find out why your report is performing slowly. Then fix it.
That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question. -
Will Result Cache improve the database performance in 11g? what is the max size of Result Cache?
Will Result Cache improve the database performance in 11g? what is the max size of Result Cache?
Thanks for convincing me I really need a new laptop...
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:52.94
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:00.01
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:00.01
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:45.08
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:01:16.29
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:01:18.63
Message was edited by: Hoek
The result cache seems to have lagged a bit for the first hintless query.. -
To improve the system performance of the code
Please help me to improve the system performance of the following program. its very urgent
report zsdr0125
no standard page heading
* LINE-SIZE 170 " SIR 061880
line-size 210 " SIR 061880
line-count 58
message-id zz.
** Report header ******************************************************
** Report name: Activity Costing Report
** Report id: RO-01148
** Designed/Coded. Tori Chandler. Reporting Team.
** Date: March 01, 2000.
** Original SIR: 016113
** Application Area: V - Sales & Distribution (OTC)
** Correction/Transport: D10K951579
** Description: It is normal business practice for logistics
** operations to charge business units for the activity
** incurred on their behalf. This is consistent with
** activity based costing principles between BU and
** shared resources. The activities involved are picking
** storage, shipping and receiving. The purpose of this
** report is to provide data for the first 3.
** QRB2 - 03/13/2000 - Tracy, Antoine, Christian, Tori
** History:
* 06/14/2001 SIR 032383 CTS Antoine Dailly
* A plant (WERKS) can have several Distrib points (VSTEL)
* SIGN = 032383
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 034606 D10K979189 Logistics Activity report
* Logistics Activity reports
* We added fields ship to customer and country and we also make another
* total
* QRB2 Tracy L. Obrien
* Modification History:
* Date Modified by SIR CTS Description
*11/14/2001 J.CAMPION 37838 D10K982890 Select only
* material type HALB
*06/12/2002 T OBrien 38784 D10K988181
* Allow option to get material weight from Master data or
* from the delivery.
* Modified by SIR CTS Date
* Jim Harwood 42730 D10K993119 10 Oct 2002
* Description: Code amended to default the Goods Issue Date range to
* the previous month. Also amended to print out the Select Options.
* Modified by SIR CTS Date
* Jim Harwood 44381 D10K994598 18 Nov 2002
* Description: Correct date range processing. APPEND statement added
* so that record is added ot internal table S_WADAT. Also S_VKORG
* removed as it was NO DISPLAY and nothing was assigned to it. It's use
* in an SQL call may be causing the wrong optimization.
* Modified by SIR CTS Date
* Tori Chandler 45567 D10K995875 03 Jan 2003
* Description: Correct reporting of weights for non-pickable items
* when the Material Master Data radiobutton is selected. Also found
* from SIR 37838, that material type is hardcoded on the LIPS. I
* created a new select option and the person needing the report
* can control if they want only HALB or all line items. Also,
* because of this the delivery weight is obtain from header,
* changing to accumulate from LIPS to match which lines are selected
* QRB2: 1/15/2003: Eileen, Jerome and Tori
*{ INSERT D11K901833 1
* Modified by Sir CTS Date
* Sue Kastan 48712/054042 D11K901833 28 Aug, 2003
* Fix overcounting of records from LIPS
*} INSERT
* Modified by SIR CTS Date *
* Vijay Andea 061880 D11K918628 04/20/2006 *
* D11K946194 *
* Description: Enhence ZSDR0125 Activity Cost Driver Report to allow *
* Analysis by Product Groupings. *
*} INSERT
* Modified by SIR CTS Date *
* Prakash Arunachalam 091510 D11K950288 09/26/2006 *
* Description: Correct Activity Cost report - material weight *
* calculation *
* Modified by SIR CTS Date *
* Murali Krishna 301978 D50K903293 01/20/2008
* Description: Improve the system performance of this report and
* clean-up of code into various form routine
* Table declaration.
tables: likp, " SD Document: Delivery Header Data
lips, " SD document: Delivery: Item data
vepo, " SD Document: Shipping Unit Item (Content)
vekp, " SD Document: Shipping Unit Header
knvv, " Customer Master Sales Data
kna1, " General Data in Customer Master SIR 34606
marm, " Units of Measure
mara, " Material Master: General Data SIR 38784
t001l, " Stge locs
t001k, " Valuation area
tvswz, " Shipping Points per Plant
t134, " Material types
z0234. " Alternative Unit of Measure
*** Selection screen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_werks like t001l-werks obligatory memory id wrk.
select-options: s_lgort for t001l-lgort,
* S_VKORG FOR TVKO-VKORG NO-DISPLAY ," SIR 34606, 42730
* S_WADAT FOR LIKP-WADAT_IST OBLIGATORY NO-EXTENSION,
s_wadat for likp-wadat_ist no-extension, " SIR 42730
s_mtart for t134-mtart, " SIR 45567
s_lfart for likp-lfart no-display no intervals.
selection-screen skip 2.
selection-screen comment 1(21) text-002. " SIR 38784
parameters: p_delwt radiobutton group grp1, " SIR 38784
p_mstwt radiobutton group grp1. " SIR 38784
*--------------------------------------------------*Start of SIR 061880
selection-screen skip 2.
selection-screen comment 1(21) text-006.
parameters: p_voldl radiobutton group 2, " Volume from Delivery
p_volmd radiobutton group 2. " Volume from Master Data
*-----------------------------------------------------End of SIR 061880
selection-screen end of block b1.
*--------------------------------------------------*Start of SIR 061880
selection-screen begin of block b2 with frame title text-007.
select-options: s_cbuun for knvv-kvgr1 no intervals, " Customer BU
s_mbuun for mara-prdha+1(2) no intervals, " Material BU
s_lobus for mara-prdha+3(3) no intervals, " LOB
s_pac1 for mara-prdha+6(3) no intervals. " PAC1
selection-screen end of block b2.
*----------------------------------------------------*End of SIR 061880
*---Type Declaration for Internal Tables------------------------------*
types: begin of t_likp,
vbeln like likp-vbeln, " delivery
vstel like likp-vstel, " shipping point
lfart like likp-lfart, " delivery type
vkorg like likp-vkorg, " Sales organization
kunag like likp-kunag, " sold-to party
kunnr like likp-kunnr, " ship to party SIR 34606
btgew like likp-btgew, " Delivery weight
gewei like likp-gewei, " Unit of weight
anzpk like likp-anzpk, " Number of Packages SIR 61880
volum like likp-volum, " Delivery Volume SIR 61880
voleh like likp-voleh, " Volume Unit SIR 61880
vtwiv like likp-vtwiv, " Distribution channel
spaiv like likp-spaiv, " Division
wadat_ist like likp-wadat_ist, " actual goods issue date
del_flg(1) type c, "(+) SIR 301978
end of t_likp.
types: begin of t_lips,
vbeln like lips-vbeln, " delivery
posnr like lips-posnr, " delivery line
matnr like lips-matnr, " material
lgort like lips-lgort, " storage location
prodh like lips-prodh, " product hierarchy
meins like lips-meins, " base UoM
brgew like lips-brgew, " Material weight
gewei like lips-gewei, " Unit of weight
volum like lips-volum, " Material Volume SIR 61880
voleh like lips-voleh, " Volume Unit SIR 61880
lgmng like lips-lgmng, " actual delivery quantity
komkz like lips-komkz, " Indicator for picking control
mtart like lips-mtart, " Material type " SIR 37838
del_flg(1) type c, "(+) SIR 301978
end of t_lips.
types: begin of t_vepo,
venum like vepo-venum, " shipping unit number
vbeln like vepo-vbeln, " delivery
end of t_vepo.
types: begin of t_vekp,
venum like vekp-venum, " shipping unit number
brgew like vekp-brgew, " actual weight
gewei_max like vekp-gewei_max, " unit of weight
vpobjkey like vekp-vpobjkey, " key for assigned object
end of t_vekp.
types: begin of t_knvv,
kunnr like knvv-kunnr, " customer number
ktgrd like knvv-ktgrd, " acct assign group
kvgr1 like knvv-kvgr1, " customer group 1
end of t_knvv.
types: begin of t_kna1, " SIR 34606
kunnr like kna1-kunnr, " customer number " SIR 34606
land1 like kna1-land1, " contry " SIR 34606
end of t_kna1. " SIR 34606
types: begin of t_marm,
matnr like marm-matnr, " material
meinh like marm-meinh, " Alt unit of measure 032383
umrez like marm-umrez, " numerator
umren like marm-umren, " denominator
end of t_marm.
types: begin of t_mara, " SIR 38784
matnr like mara-matnr, " material " SIR 38784
prdha like mara-prdha, " Product Hierarchy " SIR 61880
brgew like lips-brgew, " gross weight " SIR 38784
gewei like mara-gewei, " Unit of weight " SIR 38784
volum like mara-volum, " Volume " SIR 61880
voleh like mara-voleh, " Volume Unit " SIR 61880
del_flg(1) type c, "(+) SIR 301978
end of t_mara. " SIR 38784
types: begin of t_tvswz,
vstel like tvswz-vstel, " shipping point
end of t_tvswz.
types: begin of t_z0234, "032383
vstel like z0234-vstel, " shipping point 032383
zpaluom like z0234-zpaluom," pallet unit of measure 032383
zcsuom like z0234-zcsuom," Case unit of measure 032383
end of t_z0234. "032383
types: begin of t_output_dt,
wadat_ist like likp-wadat_ist, " Goods issue date
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
kunnr like kna1-kunnr," ship to location SIR 34606
land1 like kna1-land1," ship to location SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_dt.
types: begin of t_output_ag,
ktgrd like knvv-ktgrd," acct assign group
bu like knvv-kvgr1," business unit
land1 like kna1-land1," country SIR 34606
d_btgew like likp-btgew," delivery weight
m_brgew like lips-brgew," material weight
a_brgew like vekp-brgew," actual weight of ship unit
num_del type i, " counter of deliveries
num_pallets type i, " number of pallets
num_cases type i, " number of cases
num_loose type i, " loose quantity
num_delln type i, " counter of delivery lines
* packages like likp-anzpk," Number of Packages " SIR 61880
packages(3) type p, " Number of Packages " SIR 61880
volume like lips-volum," Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_ag.
types: begin of t_output_gs, " SIR 34606
ktgrd like knvv-ktgrd," acct assign group " SIR 34606
bu like knvv-kvgr1," business unit " SIR 34606
d_btgew like likp-btgew," delivery weight " SIR 34606
m_brgew like lips-brgew," material weight " SIR 34606
a_brgew like vekp-brgew," actual weight " SIR 34606
num_del type i, " counter of deliv " SIR 34606
num_pallets type i, " number of pallets " SIR 34606
num_cases type i, " number of cases " SIR 34606
num_loose type i, " loose quantity " SIR 34606
num_delln type i, " counter of deliv " SIR 34606
* packages like likp-anzpk, " Number of Package " SIR 61880
packages(3) type p, " Number of Packages" SIR 61880
volume like lips-volum, " Volume " SIR 61880
lobus(3) type c, " Line of Business " SIR 61880
pac1(3) type c, " PAC1 " SIR 61880
end of t_output_gs. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Material Type
types: begin of t_mtart,
mtart like t134-mtart, " Material Type
end of t_mtart.
* Customer Business Unit.
types: begin of t_kvgr1,
kvgr1 like knvv-kvgr1, " Customer Group 1
end of t_kvgr1.
* sales Organization.
types: begin of t_lgort,
lgort like t001l-lgort, " Sales Organization
end of t_lgort.
* Begin of SIR 301978
* Header: Material Document
types: begin of t_mkpf,
vgart type mkpf-vgart,
xblnr type likp-vbeln,
end of t_mkpf.
* End of SIR 301978
*---------------------------------------------------* End of SIR 061880
*---Internal Tables---------------------------------------------------*
data: i_likp type t_likp occurs 0 with header line,
i_temp_likp type t_likp occurs 0 with header line,
v_likp type t_likp,
i_lips type t_lips occurs 0 with header line,
i_temp_lips type t_lips occurs 0 with header line,
v_lips type t_lips,
i_vepo type t_vepo occurs 0,
* V_VEPO TYPE T_VEPO,
i_vekp type t_vekp occurs 0,
v_vekp type t_vekp,
i_knvv type t_knvv occurs 0 with header line,
v_knvv type t_knvv,
i_kna1 type t_kna1 occurs 0, " SIR 34606
v_kna1 type t_kna1, " SIR 34606
i_z0234 type t_z0234 occurs 0, " 032383
v_z0234 type t_z0234, " 032383
i_z0234_uom type t_z0234 occurs 0, " 032383
v_z0234_uom type t_z0234, " 032383
i_marm type t_marm occurs 0 with header line," SIR 61880
i_marm_pallet type t_marm occurs 0 with header line,
v_marm_pallet type t_marm,
i_marm_case type t_marm occurs 0 with header line,
v_marm_case type t_marm,
*-------------------------------------------------* Begin of SIR 061880
* I_MARA TYPE T_MARA OCCURS 0, " SIR 38784
i_mara1 type t_mara occurs 0 with header line,
i_mtart type t_mtart occurs 0 with header line,
i_kvgr1 type t_kvgr1 occurs 0 with header line,
i_lgort type t_lgort occurs 0 with header line,
v_kvgr1 type t_kvgr1,
*---------------------------------------------------* End of SIR 061880
v_mara type t_mara, " SIR 38784
i_tvswz type t_tvswz occurs 0,
v_tvswz type t_tvswz, "(+) SIR 301978
i_output_dt type t_output_dt occurs 0,
v_output_dt type t_output_dt,
i_output_ag type t_output_ag occurs 0,
v_output_ag type t_output_ag,
i_output_gs type t_output_gs occurs 0, " SIR 34606
v_output_gs type t_output_gs, " SIR 34606
i_mkpf type table of t_mkpf with header line."SIR 301978
*** Data Declarations *
data: v_page(3) type c, " Page Counter
v_comp like t001k-bukrs, " zbsn0001 company code
v_title(24) type c, " zbsn0001 report title
v_rpttyp type c, " report type
v_ok type c, " control While... endwhile
v_diff_date type p, " days between selection
v_werks like t001l-werks, " plant
* v_z0234_zpaluom like z0234-zpaluom, " Pallet Unit of Measure
* v_z0234_zcsuom like z0234-zcsuom, " Case Unit of Measure
v_palwto type p decimals 6, " SIR 091510
* "like likp-btgew, " Weight after conversion
v_vekp_tabix like sy-tabix, " index on read
v_vekp_sum_brgew like vekp-brgew, " actual weight
v_pallet_qty like lips-lgmng, " calculated pallet qty
v_pallet_integer type i, " true pallet qty
v_case_qty like lips-lgmng, " calculated case qty
v_case_integer type i, " true case qty
v_qty_not_pallets like lips-lgmng, " calculated
v_num_pallets like lips-lgmng, " calculated nbr of pallets
v_num_pallets_int type i, " true nbr of pallets
v_num_cases like lips-lgmng, " calculated nbr of cases
v_num_cases_int type i, " true nbr of cases
v_total_case_qty like lips-lgmng, " case quantity
v_loose_qty type i, " calculated loose quantity
*-------------------------------------------------* Begin of SIR 061880
v_volume like lips-volum, " Volume After Convertion
v_cbuun like knvv-kvgr1, " Customer BU
v_mbuun like knvv-kvgr1, " Material BU
v_lobus(3) type c, " Line of Business
v_pac1(3) type c, " PAC1
v_flag type c. " Flag Indicator for No Data
*---------------------------------------------------* End of SIR 061880
* Begin of SIR 301978
* Ranges
ranges : r_vstel for tvswz-vstel.
* End of SIR 301978
* Constants
data: c_uom(3) type c value 'KG'. " Kilogram Unit of Meas.
data : c_vom like mara-voleh value 'M3'. " Metter Cube. " SIR 061880
constants : c_wl(2) type c value 'WL'. "(+) SIR 301978
* Initialization.
initialization.
s_lfart-sign = 'I'.
s_lfart-option = 'EQ'.
s_lfart-low = 'LF '.
append s_lfart.
s_lfart-low = 'NL '.
append s_lfart.
s_lfart-low = 'NLCC'.
append s_lfart.
s_lfart-low = 'ZLFI'.
append s_lfart.
* AT SELECTION-SCREEN.
at selection-screen.
* SIR 42730 - If no Goods Issue Date has been specified in the
* Select Options set the range to the previous month.
if s_wadat-low is initial.
s_wadat-sign = 'I'.
s_wadat-option = 'BT'.
s_wadat-high = sy-datum. " Today's date
s_wadat-high+6(2) = '01'. " First of this month
s_wadat-high = s_wadat-high - 1. " End of last month
s_wadat-low = s_wadat-high. " End of last month
s_wadat-low+6(2) = '01'. " First of last month
append s_wadat.
endif. " SIR 42730 IF S_WADAT-LOW IS INITIAL.
clear v_werks. "(+) SIR 301978
* Validate Plant/Storage Location from selection screen
select werks up to 1 rows into v_werks from t001l
where werks = p_werks and
lgort in s_lgort.
endselect.
if sy-subrc ne 0.
message e045 with text-e01.
endif.
* Validate Storage Location
if not s_lgort[] is initial.
select lgort from t001l into table i_lgort where lgort in s_lgort.
if sy-subrc ne 0.
message e045 with text-e09.
endif.
endif.
* Validate date range. do not allow more that 31 days
if not s_wadat-high is initial.
v_diff_date = s_wadat-high - s_wadat-low.
if v_diff_date >= '31'.
message e045 with text-e02.
endif.
endif.
*-------------------------------------------------* Begin of SIR 061880
* Validation for Material Type in Selection Screen
if not s_mtart[] is initial.
select mtart from t134 into table i_mtart where mtart in s_mtart.
if sy-subrc ne 0.
message e045 with text-e07.
endif.
endif.
at selection-screen on block b2.
* Validation for Material Business Unit and Customer Business Unit.
if s_cbuun-low is not initial and s_mbuun-low is not initial.
message e045 with text-e05.
endif.
* Validation for Possible combinations of Material BU, Line of Business
* and PAC1
if ( s_mbuun-low is not initial and s_lobus-low is not initial
and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_lobus-low is not initial )
or ( s_lobus-low is not initial and s_pac1-low is not initial )
or ( s_mbuun-low is not initial and s_pac1-low is not initial ).
message e045 with text-e06.
endif.
* Validation for Customer Business Unit.
if not s_cbuun[] is initial.
select kvgr1 from tvv1 into table i_kvgr1 where kvgr1 in s_cbuun.
if sy-subrc ne 0.
message e045 with text-e08.
endif.
* free: i_kvgr1.
endif.
*---------------------------------------------------- End of SIR 061880
* TOP-OF-PAGE
* Top of the page routine to print the headers and columns
top-of-page.
format color col_heading on.
if v_rpttyp = 'D'.
v_title = text-h01.
else.
v_title = text-h02.
endif.
perform zbsn0001_standard_header " Standard Report Heading Form
using v_comp v_title 'U' v_page.
skip.
if v_rpttyp = 'D'.
perform write_dtlvl_headings.
else.
perform write_aglvl_headings.
endif.
* FORM WRITE_DTLVL_HEADINGS *
* for date detail level, print the column headers *
form write_dtlvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
007 text-h07, " Date
017 text-h08, " BU
021 text-h17, " ship to party 34606
030 text-h18, " country
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*----------------------------------------------------Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_dtlvl_headings.
* FORM WRITE_AGLVL_HEADINGS *
* for account group detail level, print the column headers *
form write_aglvl_headings.
write: /001 text-h03, " Acct
038 text-h04, " ------ P I C K I N G ------
105 text-h05, " ----- S H I P P I N G -----
/001 text-h06, " Group
017 text-h08, " BU
030 text-h18, " country SIR 34606
039 text-h09, " Pallets
057 text-h10, " Cases
075 text-h11, " Loose
093 text-h12, " Lines
105 text-h13, " Material Kg
124 text-h16, " Delivery Kg
143 text-h14, " Actual Kg
161 text-h15, " Deliveries
*---------------------------------------------------*Start of SIR 61880
173 text-h20, " Packages
189 text-h21, " Volume
201 text-h22, " LOB
207 text-h23. " PAC1
*-----------------------------------------------------*End of SIR 61880
skip.
endform. " end of write_aglvl_headings.
*-------------------------- SUBBROUTINES -----------------------------*
include zbsn0001. " Include to print all Standard Report Titles
include zsdn0004. " Print the Select Options
*** MAIN SELECTION. *
start-of-selection.
refresh: i_likp, i_temp_likp, i_lips, i_temp_lips, i_vepo,
i_vekp, i_knvv, i_marm_pallet, i_marm_case, i_tvswz,
i_output_dt, i_output_ag, i_mara1.
clear: v_likp, v_lips, v_vekp, v_knvv, v_mara,
v_marm_pallet, v_marm_case, v_output_dt, v_output_ag.
v_rpttyp = 'D'.
* SIR 42730 - Echo the Select Options to the output listing and print
* the Goods Issue Date range being used.
write: /,/. " SIR 43730 - Skip a couple of lines to centre it.
perform zsdn0004_print_select_options using sy-cprog ' '.
if s_wadat-high is initial.
write: /,/, text-003, 34 s_wadat-low.
else.
write: /,/, text-003, 34 s_wadat-low, 44 text-004, 47 s_wadat-high.
endif.
new-page.
* Main Processing. *
perform get_data.
if not i_lips[] is initial.
perform create_output.
endif.
* END-OF-SELECTION
end-of-selection.
*-------------------------------------------------* Start of SIR 061880
* PERFORM WRITE_REPORT.
if not i_output_dt[] is initial and not i_output_ag[] is initial and
not i_output_gs[] is initial.
perform write_report.
else.
skip 2.
write:/ text-e03.
skip 2.
uline.
clear: v_flag.
endif.
*---------------------------------------------------* End of SIR 061880
* FORM GET_DATA *
* build all of the internal tables needed for the report *
* selects on t001k, z0234, likp, lips, vepo, vekp, knvv & marm, mara *
form get_data.
perform get_data_t001k. " SIR 301978
perform get_data_tvswz. " SIR 301978
if sy-subrc = 0. " Build shipping point range
perform get_data_Z0234. " SIR 301978
if sy-subrc ne 0.
v_flag = 'X'.
* stop.
else.
sort i_z0234 by vstel. " 032383
endif.
* Begin of SIR 301978
* The data retrievalfrom LIKP has been modified for performance
* reasons
perform get_data_mkpf. " SIR 301978
if sy-subrc eq 0.
* Deleting data other than Goods issued for delivery
delete i_mkpf where vgart ne c_wl.
sort i_mkpf by xblnr.
endif.
* Deleting the data from the internal table i_likp by comparing
* shipping point
r_vstel-sign = 'I'.
r_vstel-option = 'EQ'.
clear : v_tvswz.
loop at i_tvswz into v_tvswz.
r_vstel-low = v_tvswz-vstel.
append r_vstel.
endloop.
if not i_mkpf[] is initial.
perform get_data_likp. " SIR 301978
endif.
if sy-subrc = 0.
delete i_likp where not lfart in s_lfart.
* End of SIR 301978
* Get data for the delivery lines
if not i_likp[] is initial.
perform get_data_lips. " SIR 301978
* Begin of SIR 301978
if i_lips[] is initial.
v_flag = 'X'.
message i089 with text-i02.
leave list-processing.
endif. " Return code for LIPS select
* End of SIR 301978
endif.
*-------------------------------------------------* Begin of SIR 061880
* Get Data From MARA (Material Master) to Read Material Weight and
* Material Voluem from Master Data.
if not i_lips[] is initial.
* Begin of SIR 301978
* Delete the duplicate material from delivery item table
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
perform get_data_mara. " SIR 301978
if sy-subrc = 0.
sort i_mara1 by matnr.
clear i_temp_lips.
refresh i_temp_lips.
* End of SIR 301978
else.
v_flag = 'X'.
message i089 with text-i01.
leave list-processing.
endif.
endif.
* Filter I_LIPS and I_MARA1 When Either material BU or Line of
* Business (LOB) or PAC1 are not left Balnk
perform filter_data_for_prdha.
* Get data for the sold-to customer
perform i_knvv_fill_data.
* Filter I_LIKP & I_LIPS & I_MARA for Cust-BU, When Cust-Bu is not
* left Blank.
perform filter_likp_lips_mara_custbu.
*---------------------------------------------------- End of SIR 061880
*-------------------------------------------------* Begin of SIR 034606
* Get data for the ship to party
i_temp_likp[] = i_likp[].
sort i_temp_likp by kunnr.
delete adjacent duplicates from i_temp_likp comparing kunnr.
perform get_data_kna1. " SIR 301978
if sy-subrc = 0.
sort i_kna1 by kunnr.
endif.
*---------------------------------------------------* End of SIR 034606
else.
v_flag = 'X'.
message i089 with text-i04.
leave list-processing.
endif. " return code to LIKP select
* endif. " SIR 061880
free: i_temp_likp.
endif. " return code for TVSWZ select
* Process table LIPS
if not i_lips[] is initial.
i_temp_lips[] = i_lips[].
sort i_temp_lips by vbeln.
delete adjacent duplicates from i_temp_lips comparing vbeln.
* Get actual weight
perform get_data_vepo. " SIR 301978
if sy-subrc = 0.
sort i_vepo by venum.
delete adjacent duplicates from i_vepo comparing venum.
perform get_data_vekp. " SIR 301978
sort i_vekp by vpobjkey.
endif.
free: i_vepo, i_temp_lips.
i_temp_lips[] = i_lips[].
sort i_temp_lips by matnr.
delete adjacent duplicates from i_temp_lips comparing matnr.
* Get Units of Measure for Material
perform read_data_from_marm. " SIR 061880
* Begin of SIR 032383
i_z0234_uom = i_z0234.
sort i_z0234_uom by zpaluom.
delete adjacent duplicates from i_z0234_uom comparing zpaluom.
* End of SIR 032383
clear i_marm_pallet. " SIR 061880
refresh i_marm_pallet. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Pallets
perform i_marm_pallet_fill.
endloop. "ENDLOOP Z0234 032383
** get alternative UoM for pallets
* SELECT MATNR " material
* MEINH " Alt unit of measure " 032383
* UMREZ " numerator
* UMREN " denominator
** into table i_marm_pallet " 032383
* APPENDING TABLE I_MARM_PALLET "032383
* FROM MARM
* FOR ALL ENTRIES IN I_TEMP_LIPS
* WHERE MATNR = I_TEMP_LIPS-MATNR AND
** meinh = v_z0234_zpaluom. " 032383
* MEINH = V_Z0234_UOM-ZPALUOM. " 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_pallet by matnr meinh.
free i_z0234_uom. "032383
i_z0234_uom = i_z0234. "032383
sort i_z0234_uom by zcsuom. "032383
delete adjacent duplicates from i_z0234_uom comparing zcsuom."32383
clear i_marm_case. " SIR 061880
refresh i_marm_case. " SIR 061880
loop at i_z0234_uom into v_z0234_uom. "LOOP Z0234 032383
*-------------------------------------------------* Begin of SIR 061880
* Get Alternative Unit of Measure for Cases
perform i_marm_case_fill.
endloop. "ENDLOOP Z0234 032383
*---------------------------------------------------* End of SIR 061880
sort i_marm_case by matnr meinh.
else.
v_flag = 'X'.
message i089 with text-i02.
* leave list-processing.
endif. " table LIPS is empty
endform. " get_data
* FORM CREATE_OUTPUT *
* process internal table LIPS, for each delivery/delivery lines create*
* an output record and collect into i_output internal table. Fields *
* used for header are goods issue date, acct assign, BU for customer, *
* total weight, total weight for shipping unit and count of *
* deliveries, the remaining fields will have a value of zero for the *
* collect. For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form create_output.
*-------------------------------------------------* Begin of SIR 061880
sort i_mara1 by matnr.
sort i_lips by vbeln posnr matnr.
sort i_likp by vbeln.
sort i_z0234 by vstel.
sort i_knvv by kunnr.
sort i_kna1 by kunnr.
sort i_vekp by vpobjkey.
sort i_marm_pallet by matnr meinh.
sort i_marm_case by matnr meinh.
* LOOP AT I_LIPS INTO V_LIPS.
loop at i_lips.
clear v_lips.
v_lips = i_lips.
*---------------------------------------------------* End of SIR 061880
at new vbeln.
perform collect_header_data.
endat.
if not v_lips-komkz is initial. " SIR 45567
perform collect_item_data.
endif. " SIR 45567
endloop.
endform. " create_output
* FORM COLLECT_HEADER_DATA *
* Fields used for header are goods issue date, acct assign, *
* BU for customer, total weight, total weight for shipping unit *
* and count ofdeliveries, the remaining fields will have a value of *
* zero for the collect. *
form collect_header_data.
clear: v_likp, v_knvv, v_vekp, v_vekp_sum_brgew.
v_ok = 'Y'.
read table i_likp into v_likp with key vbeln = v_lips-vbeln
binary search.
if sy-subrc = 0. " SIR 061880
clear v_z0234. "(+) SIR 301978
read table i_z0234 into v_z0234 "32383
with key vstel = v_likp-vstel "32383
binary search. "32383
read table i_knvv into v_knvv with key kunnr = v_likp-kunag
binary search.
if sy-subrc ne 0.
select single ktgrd kvgr1 into (v_knvv-ktgrd, v_knvv-kvgr1)
from knvv where kunnr = v_likp-kunag and
vkorg = v_likp-vkorg and
vtweg = '01' and " intercompany values
spart = '01'. " intercompany values
endif.
clear v_kna1. " SIR 34606
read table i_kna1 into v_kna1 " SIR 34606
with key kunnr = v_likp-kunnr " SIR 34606
binary search. " SIR 34606
read table i_vekp into v_vekp
with key vpobjkey(10) = v_likp-vbeln
binary search.
if sy-subrc = 0.
v_vekp_tabix = sy-tabix.
while v_ok = 'Y'.
if v_vekp-gewei_max ne c_uom.
perform z_unit_conversion
using v_vekp-brgew v_vekp-gewei_max c_uom v_palwto.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_palwto.
else.
v_vekp_sum_brgew = v_vekp_sum_brgew + v_vekp-brgew.
endif.
v_vekp_tabix = v_vekp_tabix + 1.
read table i_vekp into v_vekp
index v_vekp_tabix.
if sy-subrc = 0.
if v_vekp-vpobjkey(10) ne v_likp-vbeln.
v_ok = 'N'.
endif.
else.
v_ok = 'N'.
endif.
endwhile.
endif.
endif. " SIR 061880
* populate output tables
clear: v_output_dt, v_output_ag,v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_KNVV-KVGR1.
* V_OUTPUT_AG-BU = V_KNVV-KVGR1.
* V_OUTPUT_GS-BU = V_KNVV-KVGR1. " SIR 34606
* Populate Business Unit,Line of Busness and PAC1 Values in Header Data
perform get_busunit_lobus_pac1_data1.
*---------------------------------------------------* End of SIR 061880
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
v_output_dt-a_brgew = v_vekp_sum_brgew.
v_output_ag-a_brgew = v_vekp_sum_brgew.
v_output_gs-a_brgew = v_vekp_sum_brgew. " SIR 34606
if s_mbuun[] is initial and " SIR 61880
s_lobus[] is initial and " SIR 61880
s_pac1[] is initial. " SIR 61880
v_output_dt-num_del = 1.
v_output_ag-num_del = 1.
v_output_gs-num_del = 1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* Number of Packages
v_output_dt-packages = v_likp-anzpk.
v_output_ag-packages = v_likp-anzpk.
v_output_gs-packages = v_likp-anzpk.
else.
clear: v_output_dt-num_del,
v_output_ag-num_del,
v_output_gs-num_del,
v_output_dt-packages,
v_output_ag-packages,
v_output_gs-packages.
endif.
*---------------------------------------------------* End of SIR 061880
collect v_output_dt into i_output_dt.
collect v_output_ag into i_output_ag.
collect v_output_gs into i_output_gs. " SIR 34606
endform. " collect_header_data
* FORM COLLECT_ITEM_DATA *
* For each delivery line, fields used are goods issue date, *
* acct assign, BU for material, number of pallets, number of cases, *
* loose quantity and number of delivery lines. The remaining header *
* fiels will be zero for the collect. *
form collect_item_data.
clear: v_pallet_qty, v_pallet_integer,
v_case_qty, v_case_integer,
v_num_pallets, v_num_pallets_int,
v_num_cases, v_num_cases_int,
v_qty_not_pallets, v_total_case_qty, v_loose_qty.
read table i_marm_pallet into v_marm_pallet
with key matnr = v_lips-matnr
meinh = v_z0234-zpaluom binary search."32382
if sy-subrc = 0.
v_pallet_qty = v_marm_pallet-umrez / v_marm_pallet-umren.
* round down partial pallets
v_pallet_integer = v_pallet_qty - '.499'.
endif.
read table i_marm_case into v_marm_case
with key matnr = v_lips-matnr
meinh = v_z0234-zcsuom binary search."32382
if sy-subrc = 0.
v_case_qty = v_marm_case-umrez / v_marm_case-umren.
* round down partial cases
v_case_integer = v_case_qty - '.499'.
endif.
if v_pallet_integer > 0.
v_num_pallets = v_lips-lgmng / v_pallet_integer.
v_num_pallets_int = v_num_pallets - '.499'.
endif.
v_qty_not_pallets = v_lips-lgmng -
( v_num_pallets_int * v_pallet_integer ).
if v_case_integer > 0.
v_num_cases = v_qty_not_pallets / v_case_integer.
v_num_cases_int = v_num_cases - '.499'.
endif.
v_total_case_qty = v_num_cases_int * v_case_integer.
if v_qty_not_pallets = v_total_case_qty.
v_loose_qty = 0.
else.
v_loose_qty = 1.
endif.
* populate output tables
clear: v_output_dt, v_output_ag, v_output_gs. " SIR 34606
v_output_dt-wadat_ist = v_likp-wadat_ist.
v_output_dt-ktgrd = v_knvv-ktgrd.
v_output_ag-ktgrd = v_knvv-ktgrd.
v_output_gs-ktgrd = v_knvv-ktgrd. " SIR 34606
v_output_dt-kunnr = v_kna1-kunnr. " SIR 34606
* V_OUTPUT_AG-KUNNR = V_KNA1-KUNNR. " SIR 34606
v_output_dt-land1 = v_kna1-land1. " SIR 34606
v_output_ag-land1 = v_kna1-land1. " SIR 34606
*-------------------------------------------------* Begin of SIR 061880
* V_OUTPUT_DT-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_AG-BU = V_LIPS-PRODH+1(2).
* V_OUTPUT_GS-BU = V_LIPS-PRODH+1(2). " SIR 34606
* Populate Business Unit,Line of Business and PAC1 Values for Item Data.
perform get_busunit_lobus_pac1_data2.
if V_OUTPUT_DT-BU is initial.
clear V_OUTPUT_DT.
exit.
endif.
*---------------------------------------------------* End of SIR 061880
* get delivery weight from delivery lines instead of header " SIR 45567
if v_lips-gewei = c_uom.
v_output_dt-d_btgew = v_lips-brgew.
v_output_ag-d_btgew = v_lips-brgew.
v_output_gs-d_btgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-d_btgew = v_palwto.
v_output_ag-d_btgew = v_palwto.
v_output_gs-d_btgew = v_palwto. " SIR 34606
endif.
* Get material weight from delivery (LIPS)(IF P_DELWT = 'X')" SIR 38784
if p_delwt = 'X'. " SIR 38784
if v_lips-gewei = c_uom.
v_output_dt-m_brgew = v_lips-brgew.
v_output_ag-m_brgew = v_lips-brgew.
v_output_gs-m_brgew = v_lips-brgew. " SIR 34606
else.
perform z_unit_conversion
using v_lips-brgew v_lips-gewei c_uom v_palwto.
v_output_dt-m_brgew = v_palwto.
v_output_ag-m_brgew = v_palwto.
v_output_gs-m_brgew = v_palwto. " SIR 34606
endif.
else. " SIR 38784
* Get material weight from Master data (MARA) " SIR 38784
read table i_mara1 into v_mara " SIR 38784
with key matnr = v_lips-matnr " SIR 38784
binary search. " SIR 38784
if v_mara-gewei = c_uom. " SIR 38784
v_output_dt-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_mara-brgew * v_lips-lgmng. " SIR 38784
else. " SIR 38784
perform z_unit_conversion " SIR 38784
using v_mara-brgew v_mara-gewei c_uom v_palwto. " SIR 38784
v_output_dt-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_ag-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
v_output_gs-m_brgew = v_palwto * v_lips-lgmng. " SIR 38784
endif. " SIR 38784
endif. " SIR 38784
*-------------------------------------------------* Begin of SIR 061880
* To Get the Volume Data.
perform get_volume_data.
*---------------------------------------------------* End of SIR 061880
v_output_dt-num_pallets = v_num_pallets_int.
v_output_ag-num_pallets = v_num_pallets_int.
v_output_gs-num_pallets = v_num_pallets_int. " SIR 34606
v_output_dt-num_cases = v_num_cases_int.
v_output_ag-num_cases = v_num_cases_int.
v_output_gs-num_cases = v_num_cases_int. " SIR 34606
v_output_dt-num_loose = v_loose_qty.
v_output_ag-num_loose = v_loose_qty.
v_output_gs-num_loose = v_loose_qty. " SIR 34606
*{ INSERT D11K901833 1
* Sir 054042/48712 insert code to put in 0 instead of 1 for collect
* value for delivery lines
if v_lips-lgmng = 0.
v_output_dt-num_delln = 0.
v_output_ag-num_delln = 0.
v_output_gs-num_delln = 0.
else.
* end of insert for 054042/48712
*} INSERT
v_output_dt-num_delln = 1.
v_output_ag-num_delln = 1.
v_output_gs-num_delln = 1.Since this is your first post, let me clue you in. This forum is meant for asking very short and specific questions. For example, if you've asked, how could you improve a particular one SELECT statement, I'm sure many people would have helped you.
But you cannot seriously expect someone on this forum to spend his/her time and review such a long program. For this people are normally getting paid, you know. -
Having more LTSs in logical dimension table hit the query performance?
Hi,
We have a logical table having around 19 LTSs. Having more LTSs in logical dimension table hit the query performance?
Thanks,
AnileshHi Anilesh,
Its kind of both YES and NO. Here is why...
NO:
LTS are supposed to give BI Server an optimistic and logical way to retrieve the data. So, having more Optimistic LTS might help the BI Server with some good options tailored to a variety of analysis requests.
YES:
Many times, we have to bring in multiple physical tables as a part of single LTS (Mostly when the physical model is a snowflake) which might cause performance issues. Say there is a LTS with two tables "A" and "B", but for a ad-hoc analysis just on columns in "A", the query would still include the join with table "B" if this LTS is being used. We might want to avoid this kind of situations with multiple LTS each for a table and one for both of them.
Hope this helps.
Thank you,
Dhar -
Does recompiling procedure improve the database performance???????
One of my friends working on mssql told me that recreating of procedures could improve the database performance. If you have created the procedure and recreated it after insertion of huge volume of data.
Is it true. If so how?I think so too but he said that in his microsoft certified course told that it could improve the performance.
He told me that the select statements prevously used uses the old statistic but after recreating it uses the new statistic. -
Example:
select money,sum(total),sum(amount),sum(credit), sum(total_im), sum(total_am)
from account group by money;
The problem is: The function sum -> because "TABLE ACCESS FULL" of the table account.
How to improve the query? Without to create an index for each column (sum).
Regards.user9331221 wrote:
How to improve the query?There is not much room for improvement. The select statement has to compute those five aggregates. It cannot do that without reading the entire table. So a TABLE ACCESS FULL is almost necessary. The only option (besides Keith's materialized view suggestion) is to create an index on (money,total,amount,credit,total_im,total_am) in which case this statement can do a full index scan. But this is only advantageous for your query when the table contains lots of other columns that make the table relatively big compared to the index. And the obvious disadvantage is that you now have an extra index to maintain during DML.
Regards,
Rob.
Edited by: Rob van Wijk on 9-sep-2010 13:34 -
How to improve the load performance while using Datasources for the Invoice
HI All,
How to improve the load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs to update data from R/3 to 0ASA_DS01.
If I load through flat file it will load with in ~20 Min for the same amount of data.
Please suggest how to improve load performance.
PS: I have done the Inpo package settings as per the OSS note.
Regads
Srininivasarao.Namburi.Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM -
How to improve the OpenGL performance for AE
I upgraded my display card from Nvidia 8600GT to GTX260+ hoping to have a better and smoother scrubbing of the timeline in AE. But to my disappointment, there is absolutely no improvement at all. I checked the OpenGL benchmark of the 2 cards with the Cinebench software and the results are almost the same for the 2 cards.
I wonder why the GTX260+ costs as much as about 3 times the cost of the 8600GT, but the OpenGL performance is almost the same.
Any idea how to improve the OpenGL performance please ?
Regardsjuskocf wrote:
But to scrub the timeline smoothly, I think OpenGL plays an important role.
No, not necessarily. General things like footage I/O performance can be much more critical in that case. Generally speaking, AE only uses OpenGL in 2 specific situations: When navigating 3D space and with hardware-accelerated effects. It doesn't do so consistently, though, as any non-accelerated function, such as a specific effect or exhaustion of the avialbale resources can negate that.
juskocf wrote:
Also, some 3D plugins such as Boris Continuum 6 need OpenGL to smoothly maneuver the 3D objects. Just wonder why the OpenGL Performance of such an expensive card should be so weak.
It's not the card, it's what the card does. See my above comment. Specific to the Boris stuff: Geometry manipulation is far simpler than pixel shaders. Most cards will allow you to manipulate bazillions of polygons - as long as they are untextured and only use simple shading, you will not see any impact on performance. Things get dicy, when it needs to use textures and load those textures into the graphics card's memory. Either loading those textures takes longer than the shading calculations, or, if you use multitexturing (different images combined with transparencies or blendmodes), you'll at some point reach the maximum. It's really a mixed bag. Ultimately the root of all evil is, that AE is not build around OpenGL because at the time it didn't exist, but rather the other way around OpenGL was plugged-on at some point and now there is a number of situations where one gets in the way of the other...
Mylenium
Maybe you are looking for
-
Raising an expection in variable exit: exit_saplrrs0_001
Hi, The SAP documetation states: I_STEP = 3 In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again. My question, how do
-
Failure: Error creating DaemonSession thread
Hi All, I am getting failure: Error creating DaemonSession thread errior when I start the web-server instance as follows bash-3.00$ ./start Sun ONE Web Server 6.1SP2 B04/07/2004 17:28 info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.1.0
-
Transactional control statements in trigger
Hi, Transaction Control statement, which cannot be executed within a trigger body??why...explain with reason its helpful me..
-
Regarding exit for MIGO screen
Hi, The requirement is: I need 3 additional character fields in MIGO transaction which my customer want to enter at the time of doing GR through MIGO. At the time of save they want those three fields to be capture in a table to store. Later the
-
I had a macbook, but recently upgraded to a mb pro, I cannot in Safari, right click and view page source for instance. I only have the options to go Back or Reload the page. Any suggestions as to what to do to bring back my options? Thanks in advance