IN IMOVIE CANT GET IDVD TO RESPOND

Hi Folks
Having problems with iMovie at the moment;- Iv'e craeted a project, selected it and used the share -- iDVD command
Its run its course, but then the expected icon on the tool bar does not happen !
Am I doing something wrong ? Should I have done something extra ?
My Mac is brand new so don't expect problems... or should I ?
regards
Pete from Sheffield

Blue colored text in these forums normally means a clickable link. So to determine what those reset things are all about, click on each, and be enlightened.

Similar Messages

I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed', I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed'

I have an IMac 27". Had my old HD migrated to my new machine, but cant get IDVD to work. I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed', I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed'

Did you install the iDVD Extra Content on the iLife 09 disk when you installed iDVD?
Check in your HD/Library/Application Support folder for an iDVD folder. In it will be the iDVD themes.
Make sure that folder is selected in iDVD's Advance preference pane.
Also run Disk Utiltiy to repair disk permissions.
OT

Failed to burn iMovie project, iDVD "not responding"

A preemptive thanks for your time.
I am trying to burn iMovie projects through iDVD. I have done this successfully in the past. What happens now is after going through many of the steps up through Encoding Video, the process gets stuck when the status window says "Encoding Audio". No error message occurs or anything like that, the burn wheel stops spinning, and the "multicolored wheel of computer confusion" pops up. Needless to say this means that I am even more confused than the computer and examining the iDVD icon in the dock reveals that it is "not responding."
This same problem happens with two similar projects (one of which was burned successfully in the past.) I am using Sony DVD-R disks. The projects are the typical size for about 50 minutes of edited iMovie project (15GB).
HELP!

As Rich says:
This question is frequently asked!
iDVD is probably not 'hanging'. Disregard any messages that iDVD is not responding. It is. Do not force quit.
Encoding audio is the slowest part of rendering, and can take many hours. Great patience, even an intermittent alternative hobby, is called for.
Make sure no other application is running, make sure you have not set the hard disk to go to sleep and that the screen saver will not come on. Leave it overnight, or have a 36 hole game of golf.
Sooner or later iDVD will finish!
(The current record mentioned here for encoding a DVD with lots of added audio etc is 47 hours!)

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can I get idvd?

I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available

Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7.
OT

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

IMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts?

iMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts? This is what comes up.....

iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/Preferences folder.
2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If iDVD crashes again post the first 50 lines of the crash report. Don't post a screenshot but copy and paste the actual text.
To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

After running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

Restart your MBP holding the trackpad down and hopefully the disk will be ejected. Then try to return it and get a refund or put it in the trash. There is nothing that software does for your MBP that you cannot do yourself or with free software.
If can get your MBP started, delete all traces of the offending software. Worst case is that you may have to erase the HDD and reload the OS and your user data. I trust that you have a backup (minus MacTuneUp).
Courcoul has given you his opinion in a very succinct manner, and as you might surmise, I agree with him.
Ciao.

I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

Hi
I import all from my Nikon - into iPhoto
Then closing it and opening iMovie
In the Event window like
• iPhoto-videor - Here I find mine.
Yours Bengt W

HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

How do I get a movie from iMovie 10 to iDVD to burn a disc

How do I get a movie from iMovie 10 to iDVD to burn a disc?

To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Cant get IMovie to reconize camera

Hi everyone,
I cant get Imovie to reconize that I have my camera plugged in. I set the camera mode to VCR (which i think it is just on PLAY), plug the camera in and start Imovie. Then in IMovie click the switch onto camera in the bottom left hand corner. The only thing that comes up is Isight.
Here is my set up:
MacBook Mac OS X (10.4.9) JVC Mini DV GR-D270U camera, a JVC 4 to 6 pin cable via firewire, IMovie HD
Thanks all!

the mode is correct for VCR by while browsing manual i found this:
Using DV cable
It is also possible to transfer still/moving images to a PC with a DV conector by using the provided sotware (GR-d290 only), software equipped with the PC or commercialy available software.
Of coure the disk is windows only, but i thought macs didnt need these so much and were a little more plug and pay. I bet you just can't use this camera with a mac. The thing when i bought it (about 8 months ago ish) was like $350-$400, but if i can't connect to computer its worthless to me . What a buzz kill

My idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??

my idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??? i dont know why, i did not add anty effect.

any suggestions

I cant get video from my panasonic camcorder to imovie

I recorded a man who spoke at my sons school for the teacher. i used a panasonic camcorder. i cant figure out how to get the video to imovie from the camera. i tried a usb cord but it didnt work. so i bought a FW cable and i still cant get it to work. i tried pc mode and playback mode. i looked in the menu i didnt see a dv out option. what should i do?
thank you

Hi
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

I'm trying to burn my iMovie projects to DVD, but can't find iDVD. Does anyone know where to get iDVD?

How do I get iDVD?

By purchasing an iLife 08 or newer DVD from a source such as Amazon or eBay, or if your computer shipped with 10.6.8 or earlier(not including Mac OS X Server), installing it from the computer's original disks.
(77453)

IN IMOVIE CANT GET IDVD TO RESPOND

Similar Messages

Maybe you are looking for