In measurement doc.where to enter as on date counter readings after go live

Dear All,
After go live the sap system, user has to start creating the measurement document for counters which as follows.
Suppose we have go lived on 1st feb 2010, so on that day already physical counter is showing following readings.
Equipment - Counter - Current readings of meter (as on 1st feb 2010)
DG Set - Running Hours - 3000
Boiler - Running Hours - 2400
Compressor - Running Hours - 3800
Electricity meter - Units - 5800
I am little confused about in which field of measurement document i have to enter the above as on date readings (1st feb 2010).
Those fields are
Counter reading
Differnce
I am also worried, because this is start of creation of measurement document & which makes basis for counter base preventive maintainence of equipment.
Thanks & Regards,
Sandeep

Hi
First time reading you entre in counter reading filed, then the subsequent daily reading you can entre in counter reading field or difference.
It means, if you entre counter reading, system automatic calculate the difference (i.e current minus previous reading),
or if you entre the difference, then system bring the counter reading as difference plus previous reading.
Check these senerios in Quality and then you can take decision
S Ramanujam

Similar Messages

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

    This is the code which we have used.
    //////////Return if it is first time for the day or not//////////////
    + (BOOL)isFirstTimeToday {
    BOOL result = YES;
    NSDate *now = [[NSDate alloc] init];     /// represents the current time
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
    NSDate *today = [gregorian dateFromComponents:components];
    [now release];
    [gregorian release];
    NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
    if (savedDate) {
    if ([today earlierDate:savedDate] == today) {
    result = NO;
    return result;
    ////////Stores the date/////////////
    + (void)userDidVisitReenforceScreenToday {
    [[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
    ////////////What [NSDate todayAtMidnight] stores/////////////////////
    + (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
    NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
    NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
    NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
    NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
    [gregorian release];
    NSLog(@"dateAtMidnight : %@",dateAtMidnight);
    return dateAtMidnight;
    + (NSDate *)todayAtMidnight {
    return [self daysFromNowAtMidnight:0];
    Please Suggest..

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
    developer.apple.com

  • Can't find where to enter gateway ip and apn in no...

    hello,
    I am trying to configure internet access in nokia 2630 but just cannot find where to enter gateway ip and apn!
    I had not such problem with any other phones!

    Thanks Gifts4me. So there is no option in: Finder Prefs/Advanced/Zoom using Trackpad?
    Or is it not just in finder that you have this problem?
    lovel3i, as it says in the title and in the post, I'm using 10.5.

  • Where to enter Due Date and group currency amount in BAPI_ACC_DOCUMENT_POST

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

  • Where to enter the SL. No. of the material issued

    Dear friends I have created a material and serialised.When GR is done Serial numbers are entered for the 10 items purchased. But Where to enter the sl. no. of the item issued to a particular cost centre/work centre. I am not finding any provision in MB1B/MB1A.
    Pl. guide me how to maintain the sl.Nos of the issues/postings made.
    Thnaks in advance
    Rddha

    HI,
    In the Node SPRO > IMG > PM and CS module > Master data > Technical object > Serialization procedures > Select Integrated serial number managament and do the following settings.
    A serial number profile with the procedure MMSL must be entered in the material master record.
    If a stock check is to be performed, the indicator of the same name must be set in the serial number profile.
    In order that the individual stocks are recorded correctly, you must define the indicator as follows:
    The serial number usage for the procedure MMSL must be 03, meaning that the assignment of serial numbers is obligatory for goods movements.
    The stock check must be 2, meaning that if the stock data is inconsistent, the system does not perform the posting and issues a corresponding error message.
    In Customizing for inventory management you can sort the different types of goods movements into groups using movement type groups. By assigning movement type groups to a serialization procedure you define for the assigned movements whether:
    Serial number requirement exists for the materials assigned to the profile
    A serial number including an equipment master record is created in inventory management for a goods movement
    Regards,
    RitiG

  • What is shipment cost, where to enter it

    What is shipment cost, where to enter in which document & how it is getting calculated

    Hello Prem,
    Shipment cost is calculated in the Shipment cost document. This document is a follow up of the Shipment document. In order to determine shipment costs, you need to do following settings:
    1). Determinaion of Shipment cost type on the basis of shipment type.
    2). Assign the Shipment cost type to Item Categories.
    3). Define the shipment cost relevance for shipment types.
    4). Set up the pricing. Define Condition table with Forwarding agent. Maintain Access sequence and condition type.
    5). Finally maintain a Pricing procedure and a Pricing Procedure determination.
    Pricing procedure is determined for each Transportation planning point. It is based on the following values:
    a). Item determination group : Assigned to Item category.
    b). Service agent Procedure Group : Assigned to the forwarding agent (which is maintained as a Vendor).
    c). Shipment type group : assigned to the shipment type.
    After you have configured all these, make the Shipment document relevant for costing (at header or stage level). Assign the forwarding agents. Now though transaction Vi01, you will be able to create a shipment cost document.
    Please ask in case you have any doubts.
    Regards,
    Ankur

  • Frequent insertion of ["r;text"] where I entered ["text"]

    I am using RH7.  With annoying frequency I find [”r;text”] where I entered ["text"], like so:
    The replacement string has backward quotes as seen in my subject line.  Copy and paste, for some reason, does not bring them in here.  I have continually fixed manually, only to have them come back.  I have done a multi-file search and replace.  And they still return.
    I can find no pattern.
    Usually, all quotes in a topic have been replaced if any have, but not always. 
    I have two RH projects, and it happens in both.
    It does not seem to affect topics based on when I last edited them.
    It is not related to building the .CHM file. 
    I had used RH7 for a number of months without the difficulty.  I only began seeing it after I reinstalled on a new computer, although I don't know if it  is related since I have no idea how long it had been happening before I noticed.
    Why is this, and what do I do about it?

    It is not clear to me, and probably therefore to others, what you are trying to achieve and where the error you state is appearing. Can you be more specific so we can help you.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • I can't find where to enter my activate code for Apple TV

    I cannot find where to enter my Apple TV activation code on my I-Pad.

    There is no activation code to enter.
    What are you really trying to do?

  • I am stuck in free trial on Lightroom, I have a serial number and activation code, but cannot find where to enter those

    I bought Lightroom 5 from best buy, I did all of the downloads and it is on my computer, but it is in free trial mode, and I want to put in my serial # so I can use it not in the free trial mode. I have the serial number and the activation code, but I cannot find where to enter that info.

    Hi Cassie Brehmer,
    Kindly try the below mentioned steps.
    Launch Lightroom
    Click on help
    Click on Lightroom Registration.
    Follow the on screen instructions.
    Thanks,
    Atul Saini

  • HT4796 I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

    I am having trouble completing the the migration assistant process. My PC (Vista windows, 64 bit), will not go to the step where I enter a passcode from my MAC. Any suggestions?

    Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

  • My visa ends soon how and where to enter the new

    my visa ended soon how and where to enter the new

    Welcome to Apple Communities
    http://support.apple.com/kb/HT1918?viewlocale=en_US&locale=en_US

  • Where to enter sold to party in BAPI_SALESORDER_CREATEFROMDAT2

    Hi all,
    I have a doubt relating to BAPI_SALESORDER_CREATEFROMDAT2 for sales order creation.When am executing this bapi it gives me error to enter the ship to party and sold to party field.I am not getting where to enter the sold to party & ship to party fields.Kindly help.
    Thanks
    Siji

    Hi,
       You need to enter in ORDER_PARTNERS (partner data) In that table.
    This table parameter is used to enter partners such as sold-to party, or
    ship-to party, both at header and item level.
    PARTN_ROLE (sold-to party) if sold-to party means 'SP' and Ship-to Party means 'SH'
    PARTN_NUMB (Customer number)
    Regards,
    Dhina..

  • Where we enter raw material reservation qnty for planned order in monthwise

    sir,
    as per client requirement in every month raw material reservation quantity fixed for planned order in monthwise.
    in sap Where we entere raw material reservation   for planned order in month wise nov, dec, jan and whre its show.
    is it possible after mrp run.can we check that raw material reserve stock in mmbe for planned order.
    pl guide me step by step

    Dear Prakash,
    1) in MMBE, you cannot see Reserved qty against plan order ( it is not a confirmed receipt )
    2) the reserved qty which is shown in MMBE is against production order
    3) only after converting plan order to production order ( Header material )
    4) dependent requirements will convert into reservations
    Regards
    kumar

Maybe you are looking for