In my earlier question, I may not have been clear that when the pointer scans the icon for Firefox there is a box that comes up with "Location: "C:/ etc., V. 3. etc. instead of reflecting V. 4

Yes, i can rename the title under the icon that is always there on the desktop (which I did) but as the mouse scans the icons a light yellowish colored box pops up near the Firefox icon that starts with "Location: C:/Program Files/Mozilla Firefox 3.1 Beta 3". This is the info that should now reflect V. 4. Is there anyway to change this? This is a strange apparition that sporadically appears and then disappears on its own without any intervention on my part.

In which folder is Firefox installed?
*http://kb.mozillazine.org/Installation_directory

Similar Messages

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

This User Profile Application's connection is currently not available. The Application pool or user profile service may not have been started

Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
How to troubleshoot the issue anh help/thoughts will be appreciated

Not sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
As soon as the new app pool was provisioned, the service came back.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.

Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

"Windows cannot access the specified device, path, or file, you may not have appropriate permission to access the item" Why?

Whenever i try to access any folder on my computer(Windows 7), it tells me "Windows
cannot access the specified device, path, or file, you may not have appropriate permission to access the item",
this happens even for My
Computer and Control Panel. It's driving me nuts! I'll be honest here, I was trying to uninstall Visual
Studio 2013 Communityfrom my computer by going to Programs
and Features but for some reason, it was getting stuck at "Configuring
Your System". After trying it numerous times, I went to the visual studio installation directory, and removed
the installation files from there. I even removed the files from the C:\Program
Data folder, then i went back to Programs
and Features and tried to remove the listing there, but I got a dialog box saying "you
don't have sufficient access to uninstall visual studio" . I googled this problem and found this solution
(http://superuser.com/a/174198)
then i tried using the solution, I used SubinAcl and
changed the registry permissions as mentioned in the solution and ended up like this!
All the access permissions are set correctly (that's what I can make out...)
Please Help!

Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu

ViewObject may not have been properly initialized

Hi, sorry I am a newbie... please be patience with me...
I have a custom page to create rec, I have a CreateAM, CreateDetailVO, and also the CreatePG.
Tested and I can create a record.
Now in my CreatePG, I want to make an item to be a poplist.
So I created a popList.Server.SupplierVO
(I select View Row Class:SupplierVORowImpl to Generate Java File and Accessors),
and attached my SupplierVO to the CreateAM.
Make my field Style to "messageChoice",
and Picklist View Definition point to my SupplierVO,
Picklist View Instance = blank,
Picklist Display/value attribute to SupplierCd.
When I run the page, it came up fine, the poplist display values and I can select one,
but when I hit the apply button, it gave me the following error message
*Developer Mode Error: Stale Data
Cause:
The view object CreateAM.SupplierVO1 contained no record. The displayed
records may have been deleted, or the current record for the view object
may not have been properly initialized.
What am I missing? Any advise?
Thanks in advance!

hi SWL
make sure that you intializing VO properly in the processrequest method of you CO
check against this one
OAViewObject vo = (OAViewObject)getEmployeeTab1();(your get method for VO)
if (!vo.isPreparedForExecution())
vo.executeQuery();
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Regards,
kosal

FacesMessage(s) have been enqueued, but may not have been displayed.

I have a page with the following snippet of JSF code.
<html:message showSummary="true" errorStyle="font-color:#FF0000" for="authorName"/>
<html:outputLabel styleClass="leftFieldTags" for="authorName">Author Name</html:outputLabel>
<html:inputText id="authorName" style="text-align:left;margin:4px;font-size:13;width:40em;" value="#{addEditionPage.name}" size="128" />The following code in a bean places a message on the queue. The control field is a string "authorName".
        String msg = messages.getString(key, args);
        FacesContext.getCurrentInstance().addMessage(control,
                new FacesMessage(severity, msg, ""));My navigation on error points back to the same page.
When executed I get the following error.
2007-06-19 13:21:40,015 INFO [javax.enterprise.resource.webcontainer.jsf.lifecycle] WARNING: FacesMessage(s) have been enqueued, but may not have been displayed.
sourceId=authorName[severity=(ERROR 2), summary=(Too many authors returned), detail=()]What's going on, and why doesn't my message display. The function that adds the message is an Action method.

807976 wrote:
Hi.
I'm experience something similar.
Did you finally resolve this stuff?.
ThanksDon't resurrect old threads. Create a new one and provide a complete problem description.

Help needed: variables may not have been called

Here's the program, just compile it, it'll out put that 'loop' and 'c' may not have been called and doesn't compile. here it is....
class GCDTest {
public static void main( String [] args ) {
// Make sure we get exactly two args.
if ( args.length != 2 ){
System.out.println( "Usage: java GCDTest int int" );
return;
System.out.println("pre call");
int a = Integer.parseInt( args[0] ); // first arg is a
int b = Integer.parseInt( args[1] ); // second arg is b
GCDTest the_object = new GCDTest();
// print value of iterative method
System.out.println( "gcdIterative(" + a + "," + b + ")=" +
the_object.gcdIterative( a, b ) );
// print oracle's answer
System.out.println( "gcdRecursive(" + a + "," + b + ")=" +
the_object.gcdRecursive( a, b ) );
} //main
public int gcdIterative( int a, int b ) {
          int c;
          System.out.println("first call 1");
          boolean loop;
          boolean d = true;
          if (b > a) {
               c = b;
               b = a;
               a = c;
          System.out.println("first call 2");
          while (loop) {
               while (d) {
                    if (a >= (2*b))
                         a = a-b;
                    else d = false;
               c = b;
               b = a-b;
               a = c;
               if (b == '0');
                    loop = false;
     return c;
//your while-loop goes here.
} //gcdIterative
public int gcdRecursive( int a, int b ) {
if ( b == 0 ) return a; // base case
return gcdRecursive( b, a % b ); // recursive case
} //gcdRecursive
} //GCDTest

because you have declared c in you method
public int gcdIterative( int a, int b ) {
int c;
System.out.println("first call 1");
boolean loop;
boolean d = true;
if (b > a) {
c = b;
b = a;
a = c;
so when u call your variable from another method that is normal that your compiler can't find it.
The best way, define your variable outside your method or call your method within your loop.
Hope that help you

I do not have a face time on the setting for my iphone 4s

i do not have a face time on the setting for my iphone 4s should i replace my phone ?

Saudi, i know there no Facetime in my country, but while i'm in the usa can i replace it ?
with a new one has facetime on it?

I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help

TS1368 I cannot connect to the iTunes Store. I receive Error Code -1202. This problem began yesterday. I have been successfully connecting to the store for months on this PC. I am running Windows 7 and the Windows Security Center. Thanks for any help.

Hello alankilner,
And welcome to Apple Discussions!
Using Proxy: Yes
Try temporarily disabling this setting by following the steps outlined in this Apple support document.
http://support.apple.com/kb/TS1490
B-rock

I have been trying to change the generes for songs in my I tunes library but it doesn't allow me to do this. Does anyone know how.

I have been trying to change the generes to some of my songs in my itunes library but it doesn't allow me to do this. Does anyone know how.

Hello there, reginaairview.
The following Knowledge Base articles offer some great information in regards to how to change the Genre information on music in iTunes:
iTunes 11 for Windows: Edit song and CD information
http://support.apple.com/kb/PH12360
Edit song or CD information
Select the song or CD you want to edit, and choose File > Get Info (or press Control-I).
Click Info and make your changes.
Tip: If you’re changing the same information (for example, the genre) for multiple items, you can select all the items and change the information for them at the same time.
Create your own genre category by clicking Info and typing the category in the Genre field.
Additionally this article provides some good screen shots of where that is changed under "Editing and arranging content" section:
Playing and managing content in iTunes
http://support.apple.com/kb/ht1399
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have seen that people have been saying to unplug the Bose speakers. There are so many cords, i dont know which one to unplug. If you have any idea, please reply.

Thanks:) This may sound like a stupid question but i am completely new to apple.

And if you're not sure which plug that is... you can follow the cord from your speakers to your Mac. Although, your question is just vague enough to imply that you may be trying to fix something or that you have heard of a potential problem. Why do you feel you need to disconnect your speakers?

In my earlier question, I may not have been clear that when the pointer scans the icon for Firefox there is a box that comes up with "Location: "C:/ etc., V. 3. etc. instead of reflecting V. 4

Similar Messages

Maybe you are looking for