In Photoshop CS 6 (64 & 32), I get the error "cannot complete command because the extension could not be loaded". I can click to pass this, but none of my extensions will run. If I click on "browse in Bridge" I get "Could not complete the command Browse
Further info is that I have a current update of the JavaScript as of now, my Adobe software is all updated, as is my Windows 7 software. Everything was running fine until yesterday, and the only changes to my system were the Tuesday Windows updates. Can anyone help me resolve this problem?
I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.
Similar Messages
-
When connecting my iPhone I get the following message "The iPhone cannot be used because it requires iTunes version 10.1 or later. What does this mean? My computer has 10.4.
That's an issue with your system. Try removing the iTunes and the other APPLE software related from your system and reinstall it again.
Follow this if you're using XP: support.apple.com/kb/HT1925
Follow this if you're using VISTA/7: support.apple.com/kb/HT1923
Follow this if you are using a MAC 10.5.8 or later: support.apple.com/kb/HT1224 -
Installed iTunes 11 64 bit now get "The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." Uninstalled and installed twice no help. windows 7 64 bit, iPhone 5 OS 5.1
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I downloaded songs from a cd and when I try to play them with windows media player I get this message The license cannot be downloaded because your Web browser is not supported.
To download a license, you must install Microsoft Internet Explorer 7 or later.
To install the latest version of Internet Explorer, see the Windows Update page."Did you copy the songs directly from a CD or did you download the files from a website?
You can use a different player than the Windows Media Player to play the songs if you copied them from a CD to avoid that. -
I have a desktop pc with itunes. I just purchased a Mac Air book. Can I sync my devices, iphone, ipod, ipad, to both computers. Or do I have to pick one? I would like to have itunes on my mac, but i am afraid I will run out of hard disk space. Do I need to set up a seperate account on my Mac so I can load some music on it if I plan to keep my devices synced to my PC? Would it be possible to sync only my Iphone to my Mac?
To get that much storage, you need to look to professional online services. Pro-level hosting accounts may offer you that much (well, many will offer as much storage as you are prepared to pay for), or Amazon professional cloud services. You could also store the files on a home machine and pay for a professional hosting service so you could stream them over your own account (assuming your ISP connection and agreement allows for the bandwidth used). You would still need to deal with the issue of finding an app for the iPad that supported avi streaming.
-
I have Windows 7 Premium Home and I have downloaded the Drivers and when I click Boot Camp Assistance to partition my hard drive, it says, "The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." I can't do any backup really because I don't have an external hard drive to work with. I tried repairing disk permissions but that did not do anything. I really need a lot of help with this with some easy, step-by-step tutorials or something. I believe I have a 2006 version of Macbook Pro(4,1).
Once you have obtained an external drive and connected it you will 'clone' your internal drive to it.
Download Carbon Copy Cloner (it is not free but there is a fully functional trial version which is). Use it to clone your internal drive to your external drive. When that is done you will reboot from the clone and use Disk Utility to erase the internal drive (choose Mac OS Extended (Journaled)) as the format (this is normally preset, but check). Make sure to give the external drive a 'distinctive' name, don't want to get drives mixed up in this process.
Once that is done you will use Carbon Copy Cloner (from the clone) to restore the external to the internal. -
I am trying to attach an Ipod touch to an older Power Book G4.
Itunes says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1).
When I try to install the latest Itunes version 10.3.1 Mac says ("Open failed" requires Mac OX S 10.5.Click here and install the software.
(58765) -
When I finished backing up my iphone 5 to my hp pavilion laptop I got an error message R6034. Itunes shut down and I have not been able to reinstall it. The error message says an application has made an attempt to load the C runtime library incorrectly. My computer is more than 5 years old and I have never had this problem before. I tried unsuccessfully to reinstall itunes. Any ideas?
bdaumenHello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
Getting an error 'Cannot open Boot device' while trying to install Solaris
Hi,
We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
Am new to this technology ...And any help would be greatly appreciated. .....
ThanksCdrom drive must be scsi device 6
I assume you are running < boot cdrom> at the ok prompt
also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
Target 6
Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
If not, check the cdrom drive and the cdrom inside
hope this helps
Alan -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.
You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?
-
Title says it all. If I try to "open" an attachment, the download dialogue comes up and the progress bar begins to fill, then when it should be complete I get the message:
"The download cannot be saved because an unknown error occurred
Please Try Again."
I can still save the files, but then I have to delete them (and that's just a hassle). Any help would be appreciated!Tools, Options, Attachments, Incoming. Then set to your prefered PDF reader.
An update has reset this to the internal PDF viewer rather than sticking with the one you had before. This reader does not work on my machine. -
I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
I downloaded it and it and I continue to get the same message.
How do I fix this? Thanks, DeeUpgrade iTunes to the latest version. It should be 10.5.3.
Maybe you are looking for
-
Blank Row in table during Master Data Load
I am having some success with my master data loads, but when I maintain the master data I have noticed that every table has had a blank row inserted. Does anybody know why and what I should do with the row (i.e. delete it)?
-
Hi Guys, I am tryin to do LSMW using IDOC method. In the transaction LSMW...i have reached radiobutton - Start IDOC Generation. here i am facing a problem....it's giving me a message ' No Partner Exists with the name, "type". '. Please help me out wi
-
HT204380 I don't have face time in my i phone 4s what to do for getting face time in i phone
I don't have face time in my i phone 4s what to do for getting face time in i phone
-
JTable column headings - how to change after instantiation
Is there a way to change the column headings on a JTable AFTER is has already been instantiated? I reviewed the JTable, TableModel and TableColumn API's in detail. The only method I found related to this is the 'getColumnName' in TableModel. But ther
-
Failed Updates required to upgrade to Windows 8.1, but I see no option to reinstall
Basically what the topic title says. The updates required for 8.1 to appear in the store are marked in Windows Update as "Failed", but there is no way for me to install them.