In RDS Configuration, Test Connection is Succeful, but Test Debugger fail?

In RDS Configuration, Test Connection is Succeful, but I click Test Debugger
Test Debugger failL
"it said : An RDS connnection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: Coldfusion line Debugger is not enabled."
My Server is running normal, connection is OK! How to fix?

@waveset wrote:
Just concentrate on Username and Password. They are defintely not correct and as said by snowdog.Thank you for Snowdog and @waveset for your quick response.
Yes, "admin" and password "****" are an example about a user created in AD1 with rights enough to create and search objects in AD.
But I thing the problem is not the user. Could it be the password encryption?
I post a part of trace file for more information:
20080103 11:21:36.640 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponseBytes() Data [0x03b0]: 6f 00 6e 00 73 00 65 00 3e 00 0a 00
20080103 11:21:36.674 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponse() Exit returned= <?xml version='1.0' encoding='UTF-16'?>
<Response>
<Result status='error'>
<ResultItem type='message' status='error'>
<Message>
<Text>Error opening object 'LDAP://CN=Users, DC=mydomain, DC=vodam, DC=local': ADsOpenObject(): 0X8007052E: , 8009030C: LdapErr: DSID-0C09043E, comment: AcceptSecurityContext error, data 0, vece, Logon failure: unknown user name or bad password.
</Text>
</Message>
</ResultItem>
</Result>
</Response>

Similar Messages

Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
"We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
location that are refreshing without issue. Can anyone think of what may be causing it?
I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue.
Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
Thanks

Hi Maracles,
Thanks for your post.
From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
For more information, please see:
PowerPivot Options & Diagnostics Dialog Box:
http://technet.microsoft.com/en-us/library/gg399091.aspx
Using a Trace File to Troubleshoot Errors in PowerPivot:
http://www.sqlchick.com/entries/tag/powerpivot
Best Regards,
Elvis Long
TechNet Community Support

Question about model driven dev and RDS configuring

I am testing the model driven development that is brought up by Flash Builder4 and LCDS3 recently, and it went pretty well. However i've noticed that the configuration of the RDS for development mode is not recommanded for a production environment.
My first quetion is can I simply disable the RDS on the server when I want to deploy my app to a production environment and still be able to use all of the features such as data management service and remote service etc.? I've tried to do so but it gave me a 404 page. I felt it was a little bit confusing when you know you DO have a html template located in the right location. If RDS can be disabled without interfering the functionality of the app, where can I find a doc to follow?
My second question is if the RDS is a must, then how to configure the security setting? I knew some of the requirements by visiting this url:http://help.adobe.com/en_US/LiveCycleDataServicesES/3.1/Developing/WS6822bf3ec1c7b2e9-30fb 9b22126b9ca84aa-8000.html,
however, when I followed the steps and test it, I got a 400 error in FB4 RDS configuration page.
Since I am testing this under Tomcat 5.5, I am not sure where should I put the flex-tomcat-common.jar and flex-tomcat-server.jar file in, cause the dir structure of Tomcat 5.5 is a little bit different than that of Tomcat 6.0. Then I put these files under both of the tomcat 5.5\common\lib folder and the tomcat 5.5\server\lib folder. I've doubled checked the the catalina.properties file which is located under tomcat5.5\conf folder and I see the following environment param has been there : ${catalina.home}/common/lib/*.jar.
The other configuration I made that differs from the doc was: I put <valve classname="flex.messaging.security.TomcatValve"></valve> into the context.xml, which is under the folder Tomcat 5.5/conf. Since I put the Resource definition in the same file, I guess this should not be the problem.
Does anyone has any successful experience on setting this up?
Any hint will be appreciated.

Thanks for the quick reply.
I solved my first problem, it was because I accidentally commented out part of the RDS configuration and left the servlet-mapping part un-commented. After I generate all the client and server codes and re-deploy them to the environment, I finally got my running demo with RDS disabled.
For the second problem, I am still stucking in. I've tried to switch to the Tomcat 6.0 and follow both of the LCDS installation doc and the LCDS3.1_using doc. None could work me out. I constantly get the error message said that "The RDS server was successfully contacted, but your security credentials were invalid". So after struggling a whole day, I found the following statement, which is appeared in the ColdFusion configuraton doc:"Note: If you are using ColdFusion MX 7 or earlier, the message "The RDS server was successfully contacted, but your security credentials were invalid," appears. The message indicates that the password was not validated, even if it is correct. Click OK to close the message. ". That's interesting cause it seems it was exact the situation I was encountered. However, in my case, ignoring the error message does not give me a successful RDS connection.
For your information, I am pasting the configurations I had on my machine and maybe some ppl could give me a correction.
service-config.xml:
<security>
<login-command class="flex.messaging.security.TomcatLoginCommand" server="Tomcat"/>
        
        <security-constraint id="basic-read-access">
            <auth-method>Custom</auth-method>
            <roles>
                <role>guests</role>
                <role>accountants</role>
                <role>employees</role>
                <role>managers</role>
                <role>rds</role>
            </roles>
        </security-constraint>
    </security>
tomcat-user.xml:
<tomcat-users>
<role rolename="rds"/>
<user username="rdsuser" password="rdspassword" roles="rds"/>

</tomcat-users>
web.xml:
<servlet>
        <servlet-name>RDSDispatchServlet</servlet-name>
    <display-name>RDSDispatchServlet</display-name>
        <servlet-class>flex.rds.server.servlet.FrontEndServlet</servlet-class>
        <init-param>
      <param-name>useAppserverSecurity</param-name>
      <param-value>true</param-value>
    </init-param>
        <load-on-startup>10</load-on-startup>
    </servlet>
    <servlet-mapping id="RDS_DISPATCH_MAPPING">
        <servlet-name>RDSDispatchServlet</servlet-name>
        <url-pattern>/CFIDE/main/ide.cfm</url-pattern>
    </servlet-mapping>
lcds.xml:
<Valve className="flex.messaging.security.TomcatValve"/>
<Transaction factory="org.objectweb.jotm.UserTransactionFactory" jotm.timeout="60"/>
<Resource name="jdbc/codedata" auth="Container"
   type="javax.sql.DataSource"
   username="root"
   password="******"
   driverClassName="com.mysql.jdbc.Driver"
   url="jdbc:mysql://localhost:3306/codedata?autoReconnect=true"/>
   <Resource name="jdbc/atlantis" auth="Container"
   type="javax.sql.DataSource"
   username="root"
   password="******"
   driverClassName="com.mysql.jdbc.Driver"
   url="jdbc:mysql://localhost:3306/atlantis?autoReconnect=true"/>
Note that both of the flex-tomcat-common.jar and flex-tomcat-server.jar were already under Tomcat 6.0/lib folder.

Test connection successful and 0 rows transfered in Powerpivot

Hi..one of my user was unable to get the data.The test connection is successful but its getting 0 rows
eventually. While people using the same datafeeds are able to get the data. Can any one help me how can I troubleshoot?
Its powerpivot 2010 and 32 bit software !

Hello ShiningStar,
You might be aware of the fact that in order to answer your question, there's more data required.
1. Is this user on the same premises as "people"
2. What are the rights for this user on the server for this datafeed?
3. Can this user get the data on another computer with her credentials?

I established a VPN configuration and connected but cannot connect to server?

I work from an imac at home and need to connect to my work server and files. I established the VPN configuration and connected to the building but cannot access the server. What am I doing wrong or what else do I need to do.

Once your VPN is connected, you still need to log in to the server(s) you are using. This does not necessarily happen automatically - you may have to manually log in to your server(s).   To do this, in the Finder menu do Go > Connect to Server and enter the server address. If these are windows servers it's probably an SMB connection in which case you would enter smb://<serveraddress> in the server address field.
Best bet is to talk with the IT folks where you work, as you may need specific information about how to log in to your server(s). There are ways to automate the login but you first need the correct login details (server address, userID, password).
If you want to automate the login process, here's a simple Applescript that I wrote in my own case. Create this using Applescript Editor. After testing, save it as an Application; then in System Preferences you can add it to your list of Login Items so it runs automatically whenever you sign in to your Mac. Of course, your VPN will have to already be connected in order for this to actually work.
delay 30
tell application "Finder"
    mount volume "smb://servername1/mountpoint_A"
    mount volume "smb://servername2/mountpoint_B"
end tell
(Note: "servernameX/mountpoint_Y" is the address of each of the 2 servers I log into, except that in this example they are completely fictitious names.)

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

I'm trying to sign in on my account but an error sign come's up from window's saying test connection any ideas......

I'm trying to sign in on my itunes account but windows error come's up saying test connection any ideas.....

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

I have found a person who has a driver software to connect Labview with PCI card. But he says that i need to download a freeware software to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ??

I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??

I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.

DW CS3: test connection works, but local pages won't upload.

My MacBook Pro died, can'taccess files or apps and I don't have the CS3 install disks, so I moved DW over from my Mac Pro.The test connection works, but local pages won't upload.I re-entered all the site info, confirmed I ahd all the correct FTP settings from my sertver tech guys. I even created a new site duplicating all the original info. BTW I have ALWAYS had this problem on the Mac Pro...Never been able to upload from that computer. All the other apps in CS3 work fine.
jackhatfield

FileZilla worked. Thanks so much. Still wish I could figure out why
Dreamweaver won¹t transfer files, it would be easier than editing in DW and
then having to use Filezilla to transfer them. DW never transferred files on
the Mac Pro I had it installed on either (that¹s where I got it from when I
moved apps to my new MacBook Pro).
jack

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

How to configure informix connection pool in sun-one appserver 7

Hello,
Anybody knows , How to configure informix connection pool properties in sun-one appserver 7?
Thanks in advance.

Actually,it couldn't get some advice in here.But now,I known how to configure it,I expended 2 days to search and test it.Follow :
jdbc class:com.informix.jdbcx.IfxDataSource
serverName=(INFORMIXSERVER)
portNumber=1526(default)
IfxIFXHOST=(host ip)
databaseName=(your dbname)
user=(your username)
password=(your pwd)
attention:configure right transaction and userthreads in your informix sever
Hope helpful to someone!

RDS Configuration for CF Builder and CF8 multiserver

I've set up a named user in the CF8 Administrator for RDS access for my first instance and I cannot get a test connection in CF Builder to connect. When it asks for the Port Number, is it asking for the port number of the CF instance (i.e. 8301), the CF instance admin (8300), or is it asking for the RDS port? Is there something else that needs to be done to get basic RDS functionality to work out of the box?
I have started to follow the "Creating ColdFusion Servers" section of the CF Builder Resources, but I do not want to give developers the ability to start and stop the remote server.
(for ref: http://help.adobe.com/en_US/ColdFusionBuilder/Using/WS0ef8c004658c1089-38317734121cdfd5fd3 -7fff.html)

Thanks for the help guys. It turned out that I needed to modify the web.xml file since the RDS sections were commented out. For reference, there are two mentions of the RDS in the web.xml so you have to make sure both are uncommented. The web.xml file is located in JRun4\servers\[instance_name]\cfusion.ear\cfusion.war\WEB-INF. Once I restarted the CF instance I was able to connect successfully through RDS.

SAP B2B server - test connection problem

Hi Team,
We have business connector 4.6 sap BC server. We have created adapter connection in sapbc server to establish a connection to SAP ECC system but when we perform test connection in sapbc server it is throwing out error as" Name or password is incorrect (repeat logon)" though we mentioned the right password and logon credentials.
Created listener for sap adapter in BC server and maintained program id and other configuration details. Created TCP/IP RFC connection from SAP using register program id "SAPBC and it is working fine.
communication from SAP to BC is working fine however we could receive error when we tried to test the connection from BC to SAP ECC.
Below are the BC Error trace for reference.
**** ERROR file opened at 20140702 192722 India Standard , SAP-REL 620,0,72 RFC-VER 3 480692 MT-SL
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [5] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [6] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [8] : returns 3:RFC_SYS_EXCEPTION
>TS> Wed Jul 02 19:55:59 2014
T:190 ======> Name or password is incorrect (repeat logon)
T:190 <* RfcReceive [9] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [10] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [11] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [12] : returns 3:RFC_SYS_EXCEPTION
Below are the system details:-
SAPBC – B2B web method integration server version 4.6 on windows NT system
SAP ECC Details - ECC 6.0, Oracle 10.2, HP Unix 11.31 (Unicode)
Please share if you have any clues on this.
Regards,
Ajay Asawa

Hi Deepak,
I have attache here the screenshot in first two part. Please check attachment
and also attach the error message
There is any change we have done recently in both system. B2B connected to our ECC production system
Regards,
Ajay Asawa

Urgent please - Error Testing connection pool

I have a connection pool and datasource working fine, but when I click at the testing hyperlink on the weblogic console/jdbc/testing, the following message apear at the Unix console.
Caused by: javax.management.MalformedObjectNameException: bad object name,property Location has multiple values in Name=hom59DataSource,Type=ApplicationRuntime,Location=cbdHom,ServerRuntime=cbdHom,Loc
ation=cbdHom,Type=JDBCDataSourceRuntime
at java.lang.Throwable.<init>(Throwable.java:57)
at java.lang.Throwable.<init>(Throwable.java:68)
at weblogic.management.WebLogicObjectName.extractProperties(WebLogicObjectName.java:571)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:326)
at weblogic.management.WebLogicObjectName.setParentFromObjectName(WebLogicObjectName.java:934)
at weblogic.management.WebLogicObjectName.populate(WebLogicObjectName.java:851)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:328)
at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:822)
at weblogic.management.jmx.MBeanServerInvocationHandler.getWebLogicObjectName(MBeanServerInvocationHandler.java:80)
Somebody please could help me?
Message was edited by:
Denimar

Have figured this out. Need to set the "Test Connections" settings under Configurations
(Advanced Options) for the Connection Pool.
Thanks for your help :)
Joe Weinstein <[email protected]> wrote:
Everbright wrote:
Hi,
I've just started working on the Avitek Tutorials.
Encountered the following error message when testing the connectionpools for
both the XA and non-XA connections.
Warning! Connectivity to backend database not verified. This is eitherbecause
required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease"
have not been enabled, or an invalid value has been specified for attribute"TestTableName".
Please check the server log for more details..
Any ideas what might be wrong?It is likely that some part of the information you specified about how
to connect to
your database was incorrect, so weblogic was unable to make a pool of
connections.
We will know more if you show us the server log file, which will contain
messages
about any errors it suffered during startup...
Joe
Thanks!

In RDS Configuration, Test Connection is Succeful, but Test Debugger fail?

Similar Messages

Maybe you are looking for