In the OOTB comments component of CQ5.4, the comments are getting posted after some delay.

We are currently working on CQ 5.4 and have configured two publish instances with one author. We are also using IIS 7.5 as a dispatcher and load balancer (as there are 2 publish instances). We are using the OOTB comments component. Whenever we are posting a comment in publish, sometimes, the comment is not appearing immediately, we have to refresh the page and then the comment appears(after some delay). This creates the impression that the comment is not posted and hence causes confusion. Is it because we are using 2 publish instances that is causing this delay? Please let us know how can the comments appear immediately without any delay and without explicitly refreshing the page?

The issue most likely is that you are using two publish servers. Assuming you have the workflows set up for no moderation and immediate availability of the comment then most likely what you are seeing is the impact of reverse replication. When a comment is posted it is stored on one of the publish servers, and then is replicated back to the author server using reverse replication. On the author server a workflow kicks off and the comment is then activated to the publish servers, and dispatcher cache is flushed. Its been a while since I used 5.4 so I am not sure if the comment AJAX is dispatcher cached or not. If the comment AJAX isn't being dispatcher cached then you could set up sticky sessions on your load balancer that is in front of your publish servers and you would probably end up seeing the post immediately. Sticky sessions might not work however if the comment code is checking status - it might actually be waiting for the comment to be replicated back out by the author server - I am not 100% sure. But it should be easy to try the sticky sessions option.
Most of solutions would involve a customization of the comment functionality. I have a client where we overrode the comment posting actions and then had the JavaScript dynamically add the comment data into the DOM rather than refreshing the page/comment list. This gave the appearance of the comment being immeditely available.

Similar Messages

Can I return my i phone to apple because the color at the edges are gone already after 2 month???

Can i return my I phone 5 to apple because the color at the edges are gone already after 2 month?

You only have 30 days to return an iPhone for full refund. However, you are under warranty, so if you think this is a defect or such, take it into an Apple Store and show them and ask them about it. If the screen is faulty, they will replace it.

How to find where the segments are get filled.

Hi friends,
I want to know, where the segments are getting filled for an IDoc. Actually i have failed IDoc's, in that IDoc the segment E1EDS01 the Qualifier is 009 its having 2 fields one is SUMMID its having value of 009 and another one is SUMME its having the value of 4.124.
The requirement is this SUMME value is wrong for selected Idocs. How i debug this? I know the partner profile name, basic type and message type. How i will get the proper include name?
Its an outbound interface.
Pls anyone advice are help.
Mohana

Hi Mohana,
If you have partner profile, then goto transaction WE20 and search for your message type in Outbound paramters of that partner and double click on it. Then click on the "_Message Control_" tab.
Process code will be defined there it will direct you to Outbound processing Function module. Then you can find your segment inside include of that Function module. (It could be user-exit also)
If you cannot find process code there, then look for corresponding EDI Output type which triggers the outbound Idoc and get the program name through transaction NACE.
Hope this will help you
Regards
Saravanan

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

When i convert to pdf from word some of the letters are getting cut from the bottom

When i convert to pdf from word some of the letters are getting cut from the bottom. the letters appear perfect in word but in pdf these are getting cut from the bottom. when i increase teh spacing between lines then they are ok, but as need it for a book wherein I can't increase the space between lines.

Hi Nakul ,
Could you please explain me the work flow ?How are you trying to convert the PDF?
Is it happening with all the PDF' or any specific one ?
What exact version of Acrobat are you using?
Did you try repair your Acrobat ?If not please try repairing it and see if that works for you .
You might also try to check the update for your version of Acrobat .
Also ,you can go to preferences and under documents see if the first option .i.e Restore last view settings when Reopening documents is check marked or not .
Please try the above mentioned steps and see if that fixes the issue.
Regards
Sukrit Dhingra

Why do songs that I purchased from the iTunes store get "chopped" after a few seconds of playing?

Why do songs that I purchased from the iTunes store get "chopped" after a few seconds of playing?

You will not get recharged if you download them from the Purchased section of the iTunes Store and you are signed in with the Apple ID they were originally purchased with.
iTunes Store > Purchased (in the Quick Links section on the right) > Music

Youtube videos loads but after 2-4 sec the player area gets blank with ivory white colour... Help

Youtube videos loads but after 2-4 sec the player area gets blank with ivory white colour..
== This happened ==
Every time Firefox opened

Why are you using such an old version of Firefox. The older versions have known security issues. Consider upgrading to the current version. (Help > Check for Updates)
'''''Adobe Flash'''''
You are using a '''very old''' version of Flash Player. Updating Flash Player may solve your problem
'''Install/Update Adobe Flash Player for Firefox''': your ver. 10.0 r10; current ver. 10.1 r53 ('''important security update 2010-06-10''')
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.13; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

When I have more than one tab open, if I click on a picture to view, when the window opens to view the photo, firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason.

When I have more than one tab open, if I click on a picture to view/enlarge, say eBay, and I click on the items photo to enlarge it, when the window opens to view the photo, Firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason, The green circle starts going round and round for no reason even though the tab is not being viewed. Both problems seem to have started after the last software update.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED. After some months of use my MBP died. I got it checked in Apple verfied Service centre and was told that logic board was to blame

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED.
After some months of use my MBP died outside USA. I got it checked in Apple verfied Service centre and was told that logic board was faulty.
After I came back to US I took my MBP to Apple store and was told that there is liquid damage in the system. My question is that if there was liquid damage why did my MBP stop displaying the battery status right after the battery was changed secondly why didnt the apple verified Service centre tell me that there was liquid damage afterall I paid them the money for diagnosing the problem.
Is there a process i can followup on this problem

These are question you would need to ask that service center.
This is a User to User forum. No Apple employees here.

I run Dev 6i on Windows 2008 R2 64-bit,the forms are working fine after connection to the database but the reports continue to request for username, password and database connection string every time i try to open a report.

I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.

If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

Unable to see the subject area in obiee11g after installing the biapps

Hi All,
I had installed the BIAPPS 7.9.6.3. I am able to deploy RPD and webcatlog successfully. After that i had faced the following issues
1. Unable to login into analytics -- Resolved. ( I replaced the system-jazn-data with old fie (location : C:\OBIEE11G\user_projects\domains\bifoundation_domain\config\fmwconfig) then after i am able to login.
2. I am not able to see the subject areas as well as i am not able to edit the privileges through in manage privileges -- unresolved
 Can any one help me how to resolve the issue. Is due to the system-jazn-file or any thing else
Thanks in Advance
Krishna

Hi Kumar,
In that case I recommend you to check the view V_TBZJ1 in transaction SM30 and see whether the line
Subheader Screen text Description Appl. Scrn.seq.cat.
CRM001 Sales area data CRM CRM1 CRM001
exist or not if not then pls maintain it.
Also check the view V_TBZJ1C for the lines below
Subheader Description Item number Active
CRM001 CRM:Sales area data 2 X
If this also not exist then maintain it.
After this you will be able to see sales area tab when you will create the BP in role SP.
Allot points if my post helps!!
Best regards,
Vikash.

The piechart is getting hidden after a maximize and restore

I am using a flex application where i have panels for various
charts. I have pie charts in it as panel. these panels are
resizable. but what happens in some time if i maximize the pie
chart and then restore it the piechart is not visible. Some times
it works fine, like when i restore it, the pie chart moves from
right side and sits properly in the middle. Any idea whether this
is a known bug?
also what is observed is, if we try to resize the chart(when
the pie is not visible) by pulling the corners the pie charts come
to the middle position again..
Any idea whether this is a known bug?

Hi,
I have the exact same problem as you with my daughters iPad 2. Have you found a solution?
My daughters iPad 2 has been upgraded to IOS 7 for a while, and she complained about it sometimes turning off, restarting. Yesterday it could not be turned on at all. It was fully charged. She has been looking after it - no physical damage. Before upgrading to IOS 7 there were never any problems.
Holding the home and sleep button for 10 or 15 seconds did nothing - black screen.
Although she complained, we decided to wipe the whole thing, and start on a fresh. Could not enter recovery mode (pressing home, while attaching USB). Pressing home and sleep button for 10 seconds while connected to iTunes, causes iTunes to state that there is an iPad connected that needs to be restored.
iTunes retrieves the the 7.0.4 package and starts the update. However when the Apple logo and progress bar appears nothing happens. iTunes just states "waiting for iPad". I have left it for periods of 1 hour, 2 hours or even 6 hours without any movement what so ever on the progress bar. Have tried with three different PC's - all with same result.
If I keep the home and sleep button pressed for 10 seconds during the "stuck" update, the process starts over again - unpacking the 7.0.4 package, starting the upgrade and then nothing! Apple logo and progress bar not moving.
Just checked my warranty - and it was bought in September 2011, so that is no solution. We are using PC's with Windows 7 64-bit with Windows update turned on and no other problems.
Hope somebody can help :-)
/Philip

The photos are going insane after the 9.18 Raw Camera update!

I use Sony a700, and after the latest RawCamera update, the photos are going weird.
the color are totally changed, and it couldn't be tuned to normal. seem the new parameters(maybe there are) make the photos totally out of range.
and jpeg format is not influenced only the ARW format.
It seems to the parameters of the camera Raw Algo was mistaken.

Don't panic. There are some who've found a solution!
What you'll need to do is "Downgrade" back to RAW Update 2.1.
GO to this thread and scroll down to a post by Clem on Sep 17 at 9:56:
http://discussions.apple.com/thread.jspa?threadID=1713679&tstart=0
Worked for me.
Good luck

Mail sent by the program are getting appended for every line item in ITAB.

Hello Experts,
My program has to send mail for every line item in my internal table. Each line itme will provide the data to be filled in body of the mail .Now the problem is when i recieve mail in outlook the body of the mail is getting appended every time i recieve the mail
For example , if the mail has to go for 3 entry in itab out of five then i'm getting 3 mails but 2nd has body of 1 also and 3d has body of 1st and 2nd.
I'm using loop - endloop and it is happening due to this but is there any other way out to send mails for each line without body getting appended.
Please see the code below i'm using:-
LOOP AT lt_bg INTO lw_bg.
PERFORM populate_message_table.>>>>>>Preparing body
PERFORM send_email_message.>>>>>>>>> need to capture in loop as evry line itme has distinct subject of mail
ENDLOOP.
PERFORM initiate_mail_execute_program.
Thanks,
Naveen

Hi,
I'm using Clear wa and refresh ITAB but still i'm getting the body appended.
Thanks

My iphone 3S camera was working fine, but now the pics are getting very blurry. I've already tried cleaning the lens. What else should I try doing?

My iphone 3GS pics are getting really blurry. At first it didn't happen. I`ve tryed cleaning the lens, but it didn`t work. What else should I try doing?

I would call Apple tech support, which is excellent. Or take the phone to your local Apple store - not AT&T or Verizon, as the Apple techs specialize in Apple products and are somewhat fanatical about them.
Regarding the photos, they are probably still on the simm card in the phone and recoverable. Check with the Apple folks to get them back... sorry about your pet!

In the OOTB comments component of CQ5.4, the comments are getting posted after some delay.

Similar Messages

Maybe you are looking for