In UCM, How to setup Security Group based conversion of PS files?

Hello, everyone.
Some of my PS Format files need converted to PDF format, some do not. So, I created group 1 and group 2 in the security group. And installed gs8.54 and PDFc components.
The present result (situation) is all the PS format files are converted into PDF, but I would like that the ps format files in group 1 can be converted by selecting Distiller, the ps format files in group 2 can not be converted by selecting PassThru.
Who can tell me how to create content server filters and configure the conversion based on security groups?
Thank you very much!
By the way, my mother tongue is not English. So please use simple English as possible as you can. Thanks!

Hi
The best possible way to get this requirement done is to use SelectivelyRefineandIndex component. With this component you can create conditions and put it in the resource file for the component such that we can have only contents that are checked in to Sec Grp 1 be sent to refinery and those not belonging to this will not be sent.
The same way one can also create conditions to FullText index contents or not based on any condition that is put in the resource file for this component.
I believe you should be able to get the requirement sufficed with this component .
More details are at :
http://www.oracle.com/technology/products/content-management/ucm/samples/selectivelyrefineandindex-20080515-5.zip
Just go through the readme with the component and you will be able to get going with this component.
Hope this helps
Thanks
Srinath

Similar Messages

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

How to setup the default run page in WAR file

Can anyone please tell me how to setup the default run page in WAR file using JDeveloper? I want the login page to be the default page of the application. Thanks!

This is usually done in an .XML or other configuration file based on the particular web application container you are using.
For example, in Tomcat Java Container, its the following parameter in the /conf/web.xml file:
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
You will need to look at the documentation for your server container.
thanks

HELP : how to change security group of a document in UCM

Hello all,
I'm working with UCM a few weeks ago, but I cannot find a solution for this problem :
I have defined two security groups and two roles,
SECURITY GROUP ROLE
A ---------> ROLE_A (RW)
B ---------->ROLE_B (RW)
Then I have two Local pages and access is controlled by security group :
LOCAL PAGE SECURITY GROUP
FOLDER_A -----> A
FOLDER_B -----> B
Then i have users A1,A2,...An for role A, and B1,B2 ...Bn for role B, but they are NOT administrators.
The problem comes when an error is detected in a document by a B user, and I need that user to be able to set the security group of the document to 'A', so that users in role A can fix the problem, for example. The thing is that it seems that if you are not an administrator you cannot edit the security group of a document and in my case regular users have to be able to do that.
I would like a way to have different groups of users (or roles), collaborating toguether and sending documents from one another, but with limited responsabilities. But once the document is under a security group, the users belonging to roles with no access to that sec. group should not be able to view or edit the document.
They will be able to act on the document if the security group is changed to something they can access.
Any help on this will be greatly appreciated.
Thanks and regards,
Plan.

Hey Plan,
thats the way UCM works. that is only one part of the problem, your user will also need RW permission on the other security group to add a content in there. So only changing the security group is not the solution to your problem.
You may look at the collaboration/workflow functionality offered by UCM.
cheers,
swapnil

How to setup Business Group with Global Legislation?

Hi All,
We are exploring possibility of creating International Business Group with no Legislation Code for our client. The client has operations in multiple geographies.
I found following document in Metalink
How an International Business Group be created with no Legislation Code? [Doc ID 851711.1] It mentions "Global legislation must be installed in order to set up a Global Business Group. The business group is created just like any other, but with Global legislation selected. You will need to use Global responsibilities to access it."
When we tried to create a business group with Legislation Code as 'Global" we did not find any such Legislation Code in dropdown of *Business Group Info classification.
Has anybody implemented Global Legislation before? Any information on Setup Steps, Challenges faced, bugs and issues faced with other modules especially OTL would be appreciated.
Thanks in Advance,
Amit
Edited by: user10450466 on Jan 22, 2010 12:23 AM

I wasn't aware there's any such thing as 'Global Legislation' in HRMS and I think the Metalink Note you mention is misleading. There are multiple concepts here being mixed up.
hrglobal and Data Installer
Oracle deliver legislative seed data through hrglobal and Data Installer. When a DBA runs this they pick the legislations they wish to install. That includes legislations such as US, GB and all legislations where Oracle HRMS deliver seed data (Fast Formulas, balances, etc). One of the options here is 'Global', which ensures that common seed data used across multiple legislations is installed. This process does not create new legislations - it just creates the seed data used by those legislations. 'Global' is not a legislation - it just means that the relevant seed data (Fast Formula, balances, etc) is typically delivered without the legislation_code column being populated.
Business Groups and Legislations
A Business Group is intrinsically tied to a Legislation Code - they have a one-to-one relationship. When you define a Business Group you have to pick a Legislation and that list of Legislations comes from fnd_territories_vl. The list in fnd_territories_vl has nothing to do with hrglobal or Data Installer. There is no 'global' territory.
International HR & Payroll
If you are implementing HRMS in a country where Oracle HRMS do not deliver any specific legislative seed data or functionality (ie, the legislation isn't listed in Data Installer) you have the option of using International HR & Payroll. This allows you to install generic seed data into the legislation of your choice, which is again a list from fnd_territories_vl. Again, there's no concept of 'global' legislation. Information on that is available here:
International HR and Payroll [ID 261452.1]
International Implementations
Customers, like yours, who are rolling out Oracle HRMS to multiple countries have a big choice to make: single or multi Business Group. If you opt for one Business Group you create employees in multiple countries all within the same Business Group. That Business Group is tied to just one of those country's legislation codes - which you go for is up to you but that's generally the Legislation Code of the International HQ. The problem with this approach is that you can't leverage the legislative-specific functionality for each of the other countries.
If you opt for multi-Business Group you typically define one Business Group for each country so that you leverage the legislative-specific functionality for each country. This is generally more popular but doesn't suit everyone: you can have problems with employees transferring from one country to another, etc.
Global Structures
Oracle HRMS has forced you to tie a Business Group to a legislation code for many years. As mentioned above, this causes a number of problems. To mitigate those, Oracle have delivered a number of enhancements that help you model global businesses:
1. Global Organization Hierarchies
2. Global Security Profiles
3. Global Overseas Deployment functionality (nickname GOD/GOLD)
4. Cross Business Group profile option
5. etc
I hope that helps.

How to setup a group with autentication

Hi, Every body,
I am new in this forum, I found Stratus is a so exciting platform, now I need your help.
I want to setup a group with posting autentication, in the group, some one has the posting right, others have not. I found the "groupspecWithAuthentication, groupspecWithoutAuthentication, encodePostingAuthorization，setPostingPassword" etc. but I cant understand how to use them.
I have dived in this forum and the reference of Stratus 2.0 beta( here) for several days, and I have tried the samples posted by Mike, and I have study almost all threads in this forum, but I still cant find the clue.
Please help me out, thanks advanced,

Thank you, Mike, for your timely reply. Forgive me the delay, because now is our most important festival, I just back from a party.
Now I understand, but I still wonder,
1. if a group is in running, and a authorized user has joined. Now he misdoes, I want to withdraw the authentication, how can I? revise the password and recreate the group?
2. How can I setup a group, just authorized users can join? I know I can use secret group name, but if authorized user divulge the group name, others without autentication can join the group too. ( because the swf easy to reverse, hacker can sniff the opaque groupspec string, revise the swf, impersonate authorized user, etc).
3. How can I banishment a misdoer from my group?
Thanks again for your time.

How to setup security manager for applet at runtime?

hello everyone,
I am wonder if there is a way to setup security manager at runtime. This is what I am trying to do:
1. Create a Applet GUI and allow users to specify in an input dialog box of the URL they like make connection to.
I know there is two way of do this
1. Is modify java.policy file and specify the URL SocketPermission to connect to.
2. setup signed certificate applet.
But, I would to try to see if there is a way to have applet make connection at runtime when users specify the URL.
Anyone have any ideas.
Thanks.

Thanks, Peter
Going over some articles you and references that you pointed out was very useful on how the java security model work and a little bit history too.
So, I am assuming that I can make my own securitymanager class that defines the permission of the applet that I am working, using Permission, SecurityManager, ....etc class right? I just want to be clear on what I am going to be doing.
If you have any other thoughts, Thanks,

How to setup security for new project type templates?

Hi Folks,
I created some new project type templates.
But, as per management decision, i need to restrict this new project templates for all project users except only one super user.
So, could anybody please help me out that how to make security in the above scenario?
Thanks in advance,
SPR

Soooo...I need to install OID on top of my Forms, Reports, and Discoverer install? Would it be better to install the SSO and OID before installing any other middle ware products like Forms, Reports, and Discoverer? Then extend the domain to include Forms, Reports, and Discoverer?
Can you point me to documentation that would help me get this issue worked out?
Thanks.

UCM 11.1.1.4 : indexation : Text conversion of the file failed

Hello,
I'm facing an indexation issue with MS Office files, pdf, ...
For instance :
Text conversion of the file '/opt/oracle/middlewarehome/ucm/cs/weblayout/groups/public/documents/document/mdaw/mdaw/~edisp/virtuoz2dev000342.doc' failed.
Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.
This a new installation of UCM 11.1.1.4 with Oracle DB 10.2.0.5.2 and WLS 10.3.4, all on a SUSE10 server.
This issue is very similar to this one :
Re: XML Not Indexing???
But in my case, xml and txt files have no problem.
thanks for your help,
Vince

Hi Srinath,
Thanks for your reply. I checked the certification matrix and the certified version of DB with UCM 11g are :
Oracle 10.2.0.4+
Oracle 11.1.0.7+
Oracle 11.2.0.1+
It doesn't include 10.2.0.5 ??
I managed to trace the server output.
It seems there is a missing file : search.cfg
also, what is the meaning of the "mdaw" directories ?
thanks for your help,
system/6 04.08 09:40:47.648 IdcServer-5934 Configuring tracing verbose: true; sections: indexer
(internal)/5 04.08 09:40:47.652 IdcServer-5934 !csTraceChangedSectionsList,indexer!csTraceIsVerbose
indexer/7 04.08 09:41:11.454 index update work /opt/oracle/middlewarehome/ucm/cs/search/search.cfg doesn't exist.
indexer/7 04.08 09:41:11.455 index update work isRebuild?false; IndexerStep:Init; Class:intradoc.indexer.Indexer
indexer/7 04.08 09:41:11.455 index update work isRebuild?false; IndexerStep:CheckCollection; Class:intradoc.indexer.IndexerCollectionManager
indexer/7 04.08 09:41:11.456 index update work isRebuild?false; IndexerStep:BuildChanges; Class:entoracle.indexer.EOIndexerBuildChanges
indexer/7 04.08 09:41:11.468 index update work Saving 1 update changes
indexer/7 04.08 09:41:11.469 index update work isRebuild?false; IndexerStep:PreIndexingStep; Action:preIndexingStep
indexer/7 04.08 09:41:11.469 index update work isRebuild?false; IndexerStep:CheckForWork; Class:intradoc.indexer.Indexer
indexer/7 04.08 09:41:11.469 index update work Found work:Additions; Type:+; Change count: 1
indexer/7 04.08 09:41:11.469 index update work isRebuild?false; IndexerStep:IndexAdditions; Class:intradoc.indexer.CommonIndexerBulkLoader
indexer/7 04.08 09:41:11.470 index update work IndexerBulkLoader doing 'IndexAdditions' with m_change '+'; total count: 1; max count: 10000
indexer/7 04.08 09:41:11.470 index update work WebChange retrieved. RevClassID:342; dID:364; Indexer State: ; ReleaseState:U
indexer/7 04.08 09:41:11.477 index update work webFormat is application/msword
indexer/6 04.08 09:41:11.477 index update work computeIndexableFileAttributes(); item:virtuoz2dev000342,formatType:webviewable,renditionCount:-1,format:application/msword,isAllowMap:true,isVault:false
indexer/7 04.08 09:41:11.477 index update work Direct indexing allowed: false
indexer/7 04.08 09:41:11.477 index update work Conversion allowed: true
indexer/7 04.08 09:41:11.479 index update work Conversion handler for format 'application/msword' is 'TextIndexerFilter'
indexer/6 04.08 09:41:11.479 index update work Added new item for indexing consideration. [format:application/msword, formatType:webviewable, filePath:/opt/oracle/middlewarehome/ucm/cs/weblayout/groups/public/documents/document/mdaw/mdaw/~edisp/virtuoz2dev000342.doc, fileSize:21504, url:/cs/groups/public/documents/document/mdaw/mdaw/~edisp/virtuoz2dev000342.doc,allowDirectIndex:false, allowConversion:true, conversionHandler:TextIndexerFilter, useMap:false, mapExtension:null
indexer/7 04.08 09:41:11.480 index update work indexWebFile: true m_retryIndexing: false m_isFirstRetry: true
indexer/6 04.08 09:41:11.494 index update work preparing 1 items
indexer/6 04.08 09:41:11.549 index update work doing conversion with intradoc.indexer.TextConversionHandler@484f1ee on intradoc.indexer.IndexerInfo@47ef07e dID:364 key:null mdo:false iwf:true sta:-1 alone:true
indexer/7 04.08 09:41:11.550 index update work InputFilePath is: </opt/oracle/middlewarehome/ucm/cs/weblayout/groups/public/documents/document/mdaw/mdaw/~edisp/virtuoz2dev000342.doc>
indexer/7 04.08 09:41:11.550 index update work OutputFilePath is: </opt/oracle/middlewarehome/ucm/cs/search/IdcColl1/bulkload/~export/virtuoz2dev000342.txt> >indexer/7 04.08 09:41:11.550 index update work Sending document to conversion >(internal)/7 04.08 09:41:11.623 TextExport Abandon inattendu par le processus 'TextExport'. >indexer/6 04.08 09:41:11.624 index update work prepareDoc complete >indexer/7 04.08 09:41:12.001 index update work setting change on '364' to 'I' >indexer/7 04.08 09:41:12.005 index update work after handling indexing results: hasError: false m_retryIndexing: false m_isFirstRetry: true metaOnlyCount: 0 aSize: 1 >indexer/7 04.08 09:41:12.006 index update work isRebuild?false; IndexerStep:CheckForWork; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:41:12.006 index update work isRebuild?false; IndexerStep:DetermineSubscription; Class:intradoc.indexer.DetermineSubscription >indexer/7 04.08 09:41:12.007 index update work isRebuild?false; IndexerStep:Replication; Class:intradoc.server.IndexerReplication >indexer/7 04.08 09:41:12.008 index update work isRebuild?false; IndexerStep:PostIndexingStep; Action:postIndexingStep >indexer/7 04.08 09:41:12.008 index update work isRebuild?false; IndexerStep:Cleanup; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:41:12.013 index update work cleanup for dID 364 change is I origChange is + newIndexerState is >indexer/7 04.08 09:41:12.022 index update work isRebuild?false; IndexerStep:ContentRefresh; Action:postDatabaseStep >indexer/7 04.08 09:41:12.024 index update work isRebuild?false; IndexerStep:Init; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:41:12.024 index update work isRebuild?false; IndexerStep:CheckCollection; Class:intradoc.indexer.IndexerCollectionManager >indexer/7 04.08 09:41:12.024 index update work isRebuild?false; IndexerStep:BuildChanges; Class:entoracle.indexer.EOIndexerBuildChanges >indexer/7 04.08 09:42:23.609 index update work /opt/oracle/middlewarehome/ucm/cs/search/search.cfg doesn't exist. >indexer/7 04.08 09:42:23.609 index update work isRebuild?false; IndexerStep:Init; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:42:23.609 index update work isRebuild?false; IndexerStep:CheckCollection; Class:intradoc.indexer.IndexerCollectionManager >indexer/7 04.08 09:42:23.610 index update work isRebuild?false; IndexerStep:BuildChanges; Class:entoracle.indexer.EOIndexerBuildChanges >indexer/7 04.08 09:42:23.613 index update work isRebuild?false; IndexerStep:Replication; Class:intradoc.server.IndexerReplication >indexer/7 04.08 09:42:23.613 index update work isRebuild?false; IndexerStep:PostIndexingStep; Action:postIndexingStep >indexer/7 04.08 09:42:23.613 index update work isRebuild?false; IndexerStep:Cleanup; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:42:23.617 index update work isRebuild?false; IndexerStep:ContentRefresh; Action:postDatabaseStep >indexer/7 04.08 09:42:23.618 index update work isRebuild?false; IndexerStep:Init; Class:intradoc.indexer.Indexer >indexer/7 04.08 09:42:23.618 index update work isRebuild?false; IndexerStep:CheckCollection; Class:intradoc.indexer.IndexerCollectionManager >indexer/7 04.08 09:42:23.619 index update work isRebuild?false; IndexerStep:BuildChanges; Class:entoracle.indexer.EOIndexerBuildChanges

How to setup Security during installation

Hi Experts,
   Please let me know how to achieve "Setting up security for service-level accounts (page 12 in SAP BPC 5.1 Master Install Guide)"... I have created 3 users in my windows server 2003:
             1.Administrator (member of Administrators group in server 2003)
             2.SysAdmin (member of Administrators group in server 2003)
             3.student (member of Users group in server 2003)
Please let me know whether\how the System Admin ID matches with the SystemAdmin role in the BPC 5.1 and how the Admin ID matches with the PrimaryAdmin role in the BPC 5.1.
I am installing using SysAdmin ID which is a member of Administrators group on my machine.
I have also got License file from Service Market Place for SAP BPC 5.1 where and how should I use this file ??
Thank You,
Sudhakar Kuricheti

What I normally do during an installation, is to create one user whith which I do the complete installation.This user should pass the following requirements:
u2022 The user must preferably be a domain user. It can be a local user on the server, but not in a production environment.
u2022 The user must be a local administrator on the SAP BPC server and in the case of a multi-server installation on all the servers in the environment.
u2022 This user will have to be part of the Remote Desktop users group as well because it is the only user that will be able to perform certain actions on the SAP BPC server through the SAP BPC Server Manager for example backups and restores of application sets.
u2022 Please note, this user can be reset through the server manager but because it is normally also used to start the SAP BPC COM+ components, certain services and many tasks within the application, it is of utmost importance that this user must be configured carefully before the start of the installation.
Then I instal SQL 2005 in mixed mode (so with a SA account). When finished installing SQL 2005 I run the SAP BPC setup, where I specify the same user as I used for the SQL 2005 installation for all 3 fields where usernames can be filled in.
Regarding the license file, this can be located anywhere on your server where it does not get deleted. Mostly during my installations I make a folder on the C drive called something like C:/BPC License File and put it there. The license file should be specified in the third step (first select install BPC on SQL2005, then next on the first screen containing some warnings about closing all other windows applications).
Edited by: Tim Vierhout on Sep 2, 2008 8:11 AM

UCM - How to setup synchronize between DR and Primary site

Hi all.
As mentioned on title, we have a primary UCM site and a clean DR site. I want to ensure that end-users have ability to work with DR site for a short time when the Primary site is unavailable. To make DR site available to serves when the primary is down, we can do:
- setup auto-export archive on primary site
- target to destination archive on DR site
- auto-transfer from primary to DR site
- with data in Database, we can use Golden Gate to sync Primary and DR site
So, with these settings, I can ensure that the DR is ready to run when the Primary is down. But, if the primary takes a long time to recovered, the DR site has many new contents. How to transfer it back to primary site when the primary is came back ? In other words, how to synchronize contents (vault and native files) between new Primary (old DR) and new DR (old Primary) site ?
Thank for your attention.
Sorry for my bad English.
Cuong Pham

Hi Cuong (and guys),
I'm afraid the issue is not that simple. In fact, I think that the Archiver could be used for DR only by customers who have little data and few changes. Why do I think so?
a) (Understanding System Migration and Archiving - 11g Release 1 (11.1.1)) "Archiver: A Java applet for transferring and reorganizing Content Server files and information." This means that you will use a Java applet to Export and Import your data. With a lot of items (you will need to transfer all the new and updated items!), or large items it will take time (your DR site will always be "few minutes late"). Besides, the Archiver transfers are based on batches - I don't think you can do continuous archiving - and will have impacts on the performance.
b) Furthermore, (Exporting Data in Archives - 11g Release 1 (11.1.1)) "You can export revisions that are in the following status: RELEASED, DONE, EXPIRED, and GENWWW. You cannot export revisions that are in an active workflow (REVIEW, EDIT, or PENDING status) or that are DELETED." This means that the Archiver cannot be used for all your items.
Therefore, together with FMW DR Guide (Recommendations for Fusion Middleware Components) I think other techniques should be considered:
- Real Application Clusters (RAC), Weblogic Clustering, cluster-ware file system: the first, almost error-free, and relatively cheap option is having your DR site as other nodes in DB and MW clusters. If any of your node goes down, the other(s) will still serve your customers (no extra work needed), plus, you can benefit from "united power" of multiple nodes. RAC is available also in Oracle DB Standard Edition (for max. 2-nodes db cluster). The only disadvantage of this configuration is that it is not available for geo-clustering (distance between RAC nodes must be max. some hundreds meters), so it does not cover DR scenarios like "location goes down" (e.g. due to networking issues)
- Data Guard and distributed file system: the option mentioned in the guide is actually this one. It is based on Data Guard, a free option of the Oracle Database Enterprise Edition, which can run in both asynchronous (a committed transaction on the primary site is immediately transferred to the DR site) and synchronous (a transaction is not committed on the primary until processed by the DR site - if sites are far, or a lot of data is being sent, this can take quite long) modes. So, if you store your content in the database the Data Guard can resolve a lot. Unfortunately, not everything - the guide also mentions that some artifacts (that change!) are also stored on the file system (again, workflow updates, etc), so you have to use file system sync techniques to send those updates. In theory, you could use file system to send also updates in the database, which is nothing but a file(s) (in this case you will need the Partitioning option to split your database into smaller files), but db guys hate this way since it transfers also inconsistencies, so you could end up with an inconsistent database in the DR site, too.
This option will require some administrative tasks - you will have to resolve inconsistencies resulting from DG/file system sync, you will need to redirect your users to the DR site, and re-configure the DG to make primary site from your DR one. Note that once your original primary site is up again, you can use DG to transfer (again, immediately) changes done in the meantime.
As you can see, there is no absolute solution, so you need to evaluate your options, esp. with regards to your needs.
Jiri

How to setup "Server Groups" in RSPC (process chains)?

I'm a BASIS person working with our BI group on setting up their loads to only run on the application servers. If you don't define a host in RSPC, it will always run on the database server. We don't want to specific one host in case that server has issues. How can we setup the "server group" so we can use all our application servers for these process chains. It doesn't seem to use the SMLG logon groups we defined already.
Thanks in advance!

I have setup the load balancing in the RFC, but for these jobs that are submitted via RSPC, they don't look at the SMLG parameters, they just always pick the database server. We can specify one host (other than the database server) in RSPC similar to SM36, but we were trying not to do that so in case that server is down, these jobs wouldn't fail.
I thought we could setup a "server group" and assign our 3 application server to them that way they would never fail if one is unavailable and it would keep them off the database server.

Urgent!! How to make Security Profile Based on Payrolls???

Dear Everyone,
I am facing this urgent case which is:
* My company have 2 payrolls, they need to make security based on payrolls, and the case is our HR team can access all employees data including elements except managers elements or managers data at all ( so they cant find them while querying on them from people enter and maintain window)
* I tried to make a separate payroll for managers (third payroll) and then making security profile includes all payrolls so they can access all payrolls element and data, then I make another security profile with the original 2 payrolls for other HR team so they can access employees assigned to these payrolls only, but I had to choose which is restricted ( employees or contingent workers or applicants or contacts), I tried to restrict employees in both security options, then I assigned the first security profile which includes the 3 payrolls to their responsibility in profile options, also did that with the second security profile and assigned to the profile option for the responsibility of HR team.
after choosing restrict employees in security profiles, in both responsibilities I cant find any employees( because I restricted them).
Please tell me how to make some of the top management cannot be find within search in people enter and maintain, only top management responsibilities can access all employees data and information.
thanks for your time
Mohamed Mannaa
[email protected]

to use custom you can write something like
ASSIGNMENT.grade_id in (select g.grade_id
from
per_grade_definitions gd,
per_grades g
where
g.grade_definition_id=gd.grade_definition_id (+)
and gd.segment1 <= 12
this is showing all employees having grade less than or equal to 12; you can use any other criteria based on your needs.

How to setup security on T530

Hi,
This question is whether to and best way to setup Client Security / and or Fingerprint Security.
I have been using a T500 (model 2081CTO) and now have a T530 (model 2359CTO) both with biometric fingerprint reader and using Windows 7. On the T500 I used Client Security which in turn used Fingerprint reader for Windows login and also for browser user names and passwords. Great tool.
The T530 comes with fingerprint security, which I have setup yet does not prompt at Windows logon time or within browsers to save / user username and passsword. I downloaded and installed Lenovo Client Security yet the fingerprint option within that is greyed out.
How do I correctly setup on the T530 so as to use the fingerprint reader for windows login and and also for browser user names and passwords?
Thanks

http://www.thinkscopes.com/thinkpad-t430u-fingerprint-reader-has-no-one-swipe-power-on/
http://www.flickr.com/photos/lead_org/8237196137/
does your T530 fingper reader software have the settings shown as above?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to setup Pricing Qualifier based on Item Category

Hi,
I want to create a qualifier based on the item category value. The category has 3 segments and i want to create a qualifier on one of the segments.
Could anybody help me pls.
Thanks

As of now, when an item is entered in the calling applicaiton ( Sales Order in case of Order Management), in attribute management an API is called to determine the Item Category it belongs to. You need to go one step further to identify the category segment it belongs to ( write a custom sourcing API).
On the qualifier setup side, you need to create a new qualifier attribute and the value set of this attribute should build the LOV from the values of the category segment.
Thanks
Pradeep

In UCM, How to setup Security Group based conversion of PS files?

Similar Messages

Maybe you are looking for