In va01 costcentre field is diable how to get it?

Dear all,
In programe SAPLKACB  scren  no. 1006 (which is for va01 trasaction)  it showing the costcentre field .
My requirement is in va01 t-code i have to display in account assingment tab. If any body helpme.
regards.
shashi

Dear Shashi,
Create screen variant SHDO. you will get cost centre out ther.
Thanks
Shri..

Similar Messages

  • Mail search field is missing - how to get it back?

    My Mail search field in upper right went missing. Anyone know how to get it back?

    Hi Pacodog,
    In Mail goto "View" then "Customise Toolbar" from there drag the search bar back to your toolbar.
    Good luck,
    David

  • How to get total in ALV report in same Internal table?

    Data : Begin of it_data,
            kunnr type kunnr,
            name1 type name1,
            amt1  type btrt01, " CURR 15,2
           end of it_data.
    loop at it_data into wa_data
    endloop.      
    Hello friends,
    I am developing one ALV report with 20 rows.
    I have filled one internal table with some fileds like amount.
    I want to get total of all amount1 in AMT1 field.
    So, How to get total of amount in same internal table in ALV report ?
    It is ok if i get duplicate rows in internal table.
    Points 'll be awarded soon.
    Regards,
    NVM

    Hi Ronny,
    the alv output will display the sum at the last row.
    for this functionality u have do this logic.
    data: lw_fcat type slis_fieldcat_alv.
    data: lt_fcat type slis_t_fieldcat_alv/
    wa_fcat-fieldname = 'AMT1'.
    wa_fcat-tabname = 'ITAB'.
    wa_fcat-do_sum = 'X'.
    append wa_fcat to lt_fcat.
    and then pass it to reuse_alv_grid_display function,
    regards,
    Santosh Thorat

  • How does the field ABGRU-Reason for Rejection get populated in routines

    Hi All,
    How does the field ABGRU-Reason for Rejection get populated in routines(VOFM)?
    BELNR,KPOSN,etc...fields are populated through KOMK and KOMP structures, similar way what structure is used for ABGRU?
    by the time the control from VA01 comes to routine the values of VBAK and VBAP are cleared, so these structures like KOMP and KOMK are used.
    Thanks in advance.

    You need to add rejection reason field ABGRU as a new field to pricing field catalog (KOMG structure) through APPEND structure KOMPAZ. KOMG inherits new fields from KOMKAZ (for header level fields) or KOMPAZ (for item level fields) structures and it is not directly modified but through KOMKAZ and KOMPAZ structures
    Since VBAP-ABGRU can vary from item to item, add it to item pricing communication structure KOMPAZ in SE11. Once KOMPAZ is added with new ABGRU field and activated it will automatically appear in pricing field catalog (KOMG)
    Afterwards the ABGRU field will then start to appear in the field catalog where you can create condition table (V/03) including the ABGRU as a field. Once done the rest is assigning the condition table to access sequence which is in turn assigned to the relevant condition type that you want to price based on partner function (all under IMG -> SD -> Basic functions -> Pricing -> Pricing control)
    In the pricing user exit userexit_pricing_prepare_tkomp in include MV45AFZZ, you will need a few lines of coding to fetch VBAP-ABGRU for the item and pass it to tkomp-abrug field. This will then be used by system to read the new condition table that you created.
    tkomp-abgru= xvbap-abgru
    So if you populate special pricing based on ABGRU (with possibly other conditions) in the condition table then that condition record will be read for the corresponding condition type.
    You would of course need a developer to modify KOMPAZ structure and code the user exit for moving the rejection reason to tkomp
    That is in short how you can achieve this

  • How to get sales order number before saving in VA01 by using parameter

    Hi,
    Please let me know how to get sales order number in transaction VA01 before saving it by using parameter in SU3.
    I tried to set parameter in SU3 "AUN", but it is not working as required, means sales order number is not appearing before saving.
    can you please suggest how to do it?
    Thanks & Regards.
    Rahul Verulkar

    Hi,
    In case of Support project, we get the high severity issues from users and needs to be closed withn 2 hours... so what we do we get the requirement from user and checking the same in production from our id, but we can not save the sales order as we are not authorized to do the same, so in such cases it is required to get the sales order number before saving... where we can guide the users.... but actuallly it is not getting saved in the table until and unless u save it manually. It works like a material master... when u create material master, the material number appears in advance in material number field "MATNR"
    If it is possible can you please suggest step by step to work on parameter in SU3 for sales order number before saving.
    Thanks & regards,
    Rahul Verulkar

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • How to get the value from the readonly field?????

    Hi All,
    I have a readonly field in JSF. in action class i want to get the value of that field.
    How to get the readonly field value???
    i am getting null if the field is readonly.
    i am getting value if the field is not readonly.

    I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".

  • How to Get a BLOB Field from JDBC Coding

    Hi,
    I have written the JDBC Code to get the field values from the Table.
    There is a BLOB field in that table.
    How to get the BLOB ? What is the return type we should use.
    If it is Varchar then we can use rs.getString().
    If it is BLOB then what is the return type?
    Thanks in Advance

    Blob.
    You know, people like you really give me the urge to print out several hundred pages of Java API and smack them on their heads.

  • How to get multiple selected fields in list

    Hello all,
    I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
    Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
    Thankx..

    i want to put the selected fields of list in an array through AS3....
    actually......i figured it out how to do that...........
    Its simple......use
    list.selectedItems[index]
    and to get the number of items selected......
    list.selectedItems.length
    simple.....

  • How to get additional field from the second list base on lookup information column ?

    Hi everyone,
    Currently I created a SharePoint hosted Apps project and I need to know how can I get additional field from the second list base on lookup information column. example List1 Have 2 columns column1 and column2(Lookup Information from list2 (category)),
    List2 have 3 columns title, and category, and color.  so how can get the title and color from list2 base on this lookup information column (SharePoint Hosted apps and Javascript code)? that is possible?
    Best regards,
    ------------------------------------------------------------ ---Tola---

    You can build one custom lookup control. Refer to the following post
    http://www.stuartroberts.net/index.php/2012/10/03/enhanced-lookup-field-part-1/
    Alternatively, try the following solution from codeplex
    http://sp2010filteredlookup.codeplex.com/
    http://filteredlookup.codeplex.com/
    --Cheers

  • How to get Changed fields in Sales order to create a report

    Dear Gurus,
    How to get the log from sales order for the change of particular field.
    In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
    is removed and by whom (User)?
    I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
    I hope u got my query. Please reply soon that I can create a report.
    Thanks in advance.
    regards,
    Sanjay

    Hi
    You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
    or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
    Please check and revert back
    regards,
    santosh

  • Base on invoice list document no. how to get MATKL field

    my question is regardsing, based on the provided invoice list document number, how to get MATKL (merchadise category) field from MARA table or other table. Thanks

    In the invoice document if you have the material number, MATNR, then take that and using that you can get the MATKL from the MARA table.
    Regards,
    Ravi
    Note : Please mark all the helpful answers

  • How to get all signature fields in a .pdf from C#

    Does anyone have some sample code that shows how to "iterate" all signatures in a .pdf from C#? Using the SDK and the Javascipt object model I know how to sign a document but I can't figure out how to "get all the signatures". Basically I want to open a .pdf file and then (from C#) find out what persons currently have signed the document. I guess I need to iterate all signature fields and then get the SignatureInfo object, or?
    Anyone?
    Cheers,
    Calle

    I am afraid this don't help me. How do I get the "data" back to C#? Looping all fields in in JavaScript is probably "easy" but I simply can't figure out how to get access to the data from C#. Any one have a suggestion on the best approach?
    Thx,
    CJ

  • How to get the value of a specific field in JTable

    hi every one,,,
    i'm intersting to get a field of JTable
    how can i decide the row and the column of JTable???
    and in which type will be the field ??

    If you need the row number of a selected row
    table.getSelectedRow() should work.
    If you are using a mouse then
    Point p = MouseEvent.getPoint();
    int row = table.getRowAtPoint(p);
    int column = table.getColumnAtPoint(p);
    You can set the type of the field in
    TableModel.getColumnClass(int column) method.

  • How to get automatically sysdate in a field

    How to get sysdate automatically in a field in ADF

    As provided in the above blog post provided by Branislav,
    use the groovy expressions for defaulting the date using the following expressions is the right & recommended approach:
    Only date: adf.currentDate
    Date with Time: adf.currentDateTime
    see section 3.6.1 in ADF Developer's guide:
    http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcintro.htm#CEGJJJBA
    Thanks,
    Navaneeth

Maybe you are looking for