In which table to check whether Business Location exists in VKORG, VTWEG ?
It is not OIFPBL - business location can exist, but no entry in this table.
kind regards,
KB.
Dear Krzysztof
Sorry I am not very sure about your requirement. Would like to know in which table, the fields VKORG and VTWEG stored ??
If so, VKORG is being stored in so many tables like A005, A006, A007, A020, A030 etc. Similarly VTWEG is stored in KNVP, KNVT, KNVV, MVKE, MPOI etc.,
If this is not your requirement, please enlighten more.
thanks
G. Lakshmipathi
Similar Messages
-
Which table could check 'field description' for one IDOC segment.
Hi,
Let's take am example of IDOC segment E1EDL20. If i put 'E1EDL20' in T-code: SE11.
Then i could display its structure with full field list.
But you could find that there is 'Blank' in 'field short description'...
May i know which table could check the field short description???
Thank you!Hi,
Probaly the name is not maintained in your logon language. Nevertheless you can check the name of all the tables in the table DD02T.
Regards,
Marcin -
How to check whether portal user exists or not using UM API.
Hi Experts,
Let us say i need to create an user account "PortalUser",i know how to create an user,setting first name,lastname,password for that.
but here before creating the portal user, i need to check whether that user exists or not.If user already exists ,then i need to skip the below for creating the user.
IUserFactory userFact = UMFactory.getUserFactory();
IGroupFactory groupFact = UMFactory.getGroupFactory();
IRoleFactory roleFact = UMFactory.getRoleFactory();
IUser tuser = userFact.getUserByLogonID("PortalUser");
IUserMaint newUser = userFact.newUser("PortalUser");
newUser.setFirstName("PortalUser");
newUser.setLastName("Test");
newUser.setEmail("PortalUser.Testatgmaildotcom");
//Locale PortalLanguage = new Locale(Lang.toLowerCase(), "");
Locale PortalLang=new Locale("en");
newUser.setLocale(PortalLang);
newUser.save();
newUser.commit();
IUserAccount userAcc = UMFactory.getUserAccountFactory().newUserAccount("PortalUser", newUser.getUniqueID());
userAcc.setPassword("test1test$");
userAcc.save();
userAcc.commit();
Thanks in advance.
Thanks
Sony.Hi,
Try this code,
IUserFactory factory = UMFactory.getUserFactory();
IUser user = factory.getUserByLogonID(userId);
lastName = user.getLastName();
firstName = user.getFirstName();
refer this pdf,its very helpful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/using%20the%20user%20management%20api%20with%20ep%20applications%20-%20webinar%20powerpoint.pdf
Regards,
Sunaina Reddy T -
How to check whether a file exist in the program folder or not?
Hi guys,
how to check whether a file exist in the program folder or not? Let is say i recieve a file name from user then i want to know if the file is there not and act on that base.
abdulLook at the class java.io.File and the .exists() method:
http://java.sun.com/j2se/1.4/docs/api/java/io/File.html -
Check whether mail account exists
is it possible with the javamail api to check whether an e-mail account exists or not w/o sending a mail to the account?
this would make life easier for me when people try to register for my homepage. Sometimes they enter incorrect mail addresses and I get a mail delivery error.
if I could check whether the mail account exists, and, if not, I could inform the user that tries to register, I could avoid this.
thanks,
chrisNo, it isn't possible to check whether an account exists. (Have you considered the possibility that people give you incorrect e-mail addresses on purpose so that they won't get e-mail from you?)
-
FM or table to check whether a transaction is locked or not
Hi all.
I need to create change a return order (VA02 Transaction ) & then need to create a delivery (VL01N Transaction) for this
return order no. My issue is before creating delivery (VL01n) I need to check whether return order (VA02) is lockked or not in report program. Is there any FM or table for this. Thanks in advance.
Kind Regards,
samiHi,
check the below function module to check the return order is locked or not..
CALL FUNCTION 'ENQUEUE_EVVBAKE'
EXPORTING
mode_vbak = 'E'
mandt = sy-mandt
vbeln = w_lvbeln "pass return order
x_vbeln = ' '
_scope = '2'
_wait = ' '
_collect = ' '
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc NE 0.
" Sales Order is locked
ENDIF.
Prabhudas -
Which table stores relationship of business roles and its associated roles.
Hi,
I want to know the table that stores the relationship between a Business role and its associated roles.
Please note that i am aware of the table GRACBUSROLESNAP that stores the business role relationship corresponding to a request id and this is not what i am looking for.
I want to know the table which stores the definition for business role.
Thanks & Regards,
Khush Bafna.Hi Khush,
I think table GRACROLERELAT is used to store business role definition.
Best Regards,
Aman -
How to check whether a Record Exists or not in Ztable
Hi all,
I have Req like this
In ZTable i have 2 fields * Legacy System , Legacy Material No*
Environment Value is coming in one of the field in Idoc
The logic is if the Environment Value is UK and a Record Exists on the ZTable for Legacy Sysyetm = Leg1 means i have send Legacy Material No , else Send 01
Please suggest me the process for this
REgards
Vamsi
Edited by: Vamsi Krishna on May 19, 2009 5:31 PMHi Michal / Aamir,
Thanks for your replies.
The ZTable is at R/3 side only, iam using RFC Lookup for this, but iam bit confuse on how to construct the logic to check whether there is a record Exists or not on Ztable
Logic shld be If the Environment value is UK and a record exists on the Ztable for Legacy system "ABC" means then send Legacy material number else send 01
In Table we will have the fields Legacy System Legacy Material No & Environment value is coming from Idoc itself( Ex: UK or US)
Regards -
How to check whether transport path exist between two systems in sld??
Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S -
How to check whether a node exist in a Particular Level. (xmltype)
hi,
please help me to check whether a particular node exists in one level.
for eg
I have the following xml
<map>
<entry>
<key>
heading1
</key>
<map>
<entry>
<key> sub1 heading1</key>
<value> sub1 heading1 value </value>
</entry>
<entry>
<key> sub2 heading1 </key>
<value> sub2 heading1 value </value>
</entry>
</map>
</entry>
<entry>
<key>
heading2
</key>
<map>
<entry>
<key> sub1 heading2</key>
<value> sub1 heading2 value </value>
</entry>
<entry>
<key> sub2 heading2 </key>
<value> sub2 heading2 value </value>
</entry>
</map>
</entry>
</map>i need to check how many heading exists in this xml.
I am checking like
i:=1;
l_section := ip_xml.extract('//map/entry');
WHILE l_section.existsnode('entry[' || i|| ']') = 1 LOOP
// extract the key name within entry tag
// print the key name.
i:=i+1;
end loop;but iam getting all the key name like
heading1
sub1 heading1
sub2 heading1
heading2
sub1 heading2
sub2 heading2
I need only heading1 and heading2. how can I check whether a particular node exist in particular level.
first level , second level etc. Please helpbut iam getting all the key nameThat's because you're using a descendant axis : //map/entry
SQL> DECLARE
2
3 ip_xml xmltype := xmltype('<map>
4 <entry>
5 <key>
6 heading1
7 </key>
8 <map>
9 <entry>
10 <key> sub1 heading1</key>
11 <value> sub1 heading1 value </value>
12 </entry>
13 <entry>
14 <key> sub2 heading1 </key>
15 <value> sub2 heading1 value </value>
16 </entry>
17 </map>
18 </entry>
19 <entry>
20 <key>
21 heading2
22 </key>
23 <map>
24 <entry>
25 <key> sub1 heading2</key>
26 <value> sub1 heading2 value </value>
27 </entry>
28 <entry>
29 <key> sub2 heading2 </key>
30 <value> sub2 heading2 value </value>
31 </entry>
32 </map>
33 </entry>
34 </map>');
35
36 BEGIN
37
38 for r in (
39 select heading, headno
40 from xmltable( '/map/entry/key'
41 passing ip_xml
42 columns heading varchar2(30) path '.'
43 , headno for ordinality )
44 )
45 loop
46 dbms_output.put_line('Heading '||r.headno||' = '||r.heading);
47 end loop
48 ;
49
50 END;
51 /
Heading 1 =
heading1
Heading 2 =
heading2
PL/SQL procedure successfully completed -
Single or composite role, which table to check ?
Hello,
I'm currently trying to find out in which AGR_* table is stored the flag that indicates whether a role is a composite or a single one.
I try AGR_DEFINE but it seems that there is no flag to determine whether the role is single or composite. I can't look in AGR_AGRS because i'm trying to determine composite role without any single role associated and therefore there is no entry in AGR_AGRS.
Do you have any idea ?
Thank you very much for your help !
Jerome.You can use the VIEW : V_AGR_COLL
If you go to se11 and look at the join conditions for this view you can see that in orde to have a composite rol, you should look at agr_flags for these conditions
AGR_FLAGS FLAG_TYPE EQ 'COLL_AGR'
AND
AGR_FLAGS FLAG_VALUE EQ 'X'
<edit>
i'm sorry, JC already said this, I missed that
</edit>
Message was edited by:
Dries Horions -
Want to check whether cost center exists or not during payroll process ?
Dear All,
Requirement is to throw an error for an employee during payroll run if the cost center does not exist.
I guess this may be achieved by PCR only. There is an operation OUTWPCOSTC which can help.
Issue is that there are parameters like VALEN and VAOFF which need to be taken care of while using OUTWPCOSTC.
Also, when cost center is not assigned, its value in WPBP is BLANK. How to query a BLANK value in PCRs?
Can any help on this with an complete example?
Regards,
AnkitHi Ankit,
Try with PCR
VALEN 1
OUTWPCOSTC
Update the PCR in sub schema COPY Z002 Edit basic data
000040 WPBP Read Work Center/Basic Pay Data
000050 GON Continue if Data is Complete
000060 ACTIO ZQ14 GEN Check if cost centre exits
000070 BLOCK END Edit basic data
This will help you while runing the Payroll.
Thanks & Regards
Vikram Mali -
How to check whether a file exists or not
i am in an image uploading utility. i hav succesfully uploaded the image to the server directory (say /uploads). but when displaying the uploaded image, i wanna show the picture only if the image exits (bcoz for some records there is no image). so i hav used this code
if(new File("uploads/1.jpg").exists())
out.print("image exists");
but its not working for me. i got it working fine when i give the full path "D:/Tomcat/webapps/diary/admin/uploads/1.jpg". but i think giving this absolute path is not an efficient method bcoz its a web application, bcoz i may not be able get the absolute path always. so how can i do this by specifieing the relative path
help me ASAP if u can
aleensHaii ameen
This is one way to rectify your problem..
if(new File("uploads/1.jpg").exists())
out.print("image exists");
instead of this u can write like
<%
ServletConfig cf=getServletConfig();
ServletContext c=cf.getServletContext();
if(new File(c.getRealPath("uploads")+"/test.txt").exists())
out.print("image exists");
%>If u are not clear of what it is done let me know..i will xplain to you furthur...
Happy New Year
Shanu -
Is there a way to check whether an Excel file has a header or not?
Hi!
I'm currently using POI Utility to read and write Excel files.
You normally use the HasHeaderRow = true / false to specify whether the file has a header or not.
Now, let's say I have a program that needs to read Excel files from a directory, some have headers, some don't.
Is there a way to know dynamically whether a header has been defined or not?
Then, for those having headers, the flag will be set as true, while for those which don't have any header, the flag will be set as false.
E.g.
<!--- Create an instance of the POIUtility.cfc. --->
<cfset objPOI = CreateObject(
"component",
"POIUtility"
).Init()
/>
<!--- Set directory --->
<cfset currentDirectory = GetDirectoryFromPath(GetTemplatePath()) & "newDir">
<!--- Check whether the directory exists. --->
<cfif DirectoryExists(variables.currentDirectory)>
<!--- Read files from the specified directory --->
<cfdirectory action="list" directory="#variables.currentDirectory#" type="file" filter="*.xls" name="qDirectory">
<!--- Check if the directory has any Excel file --->
<cfif variables.qDirectory.recordcount gt 0>
<!--- Loop query --->
<cfloop query="variables.qDirectory">
<!--- Check if header is present in each of the file --->
IF headerExists THEN
headerFlag = true
ELSE
headerFlag = false
END IF
<!--- Read Excel File --->
<cfset objSheet = objPOI.ReadExcel(FilePath = #variables.qDirectory.name#, HasHeaderRow = #variables.headerFlag#, SheetIndex = 0) />
</cfloop>
</cfif>
</cfif>
Any help would be most welcome.
Thanks and regards,
Yogesh MahadnacHi cfSearching,
Many thanks for your reply! I really do appreciate!
However, I've still got 1 more question for you.
At the moment, I'm using POI and sometimes cfx_Excel2Query to read Excel files.
In both cases, you have to specify whether the first row is a header.
How would you read the Excel file to check whether the 1st row is the header?
I've tried using cffile, but I get all sorts of "garbage"
<cffile action="read" file="#variables.filename#" variable="xlsResult">
<cfloop index="i" list="#variables.xlsResult#" delimiters="#chr(13)#&#chr(10)#">
<cfif variables.i eq 1>
<cfoutput>
Test 1st Row: #trim(replacenocase(listgetat(variables.i,1,","),'"',"","All"))#
</cfoutput>
</cfif>
</cfloop>
I get the following output:
ÐÏ à¡± á����.... etc etc
I'd be very much grateful if you could please advise on the latter at your earliest convenience.
Thanks and best regards,
Yogesh Mahadnac -
How to check whether a vriable is declared or not?
Hi,
Problem:
A glogal variable named :GLOBAL.ENV is used in one of my form.
But its value is coming from another form which is developed by another programmer.
I need to check like this:
IF :GLOBAL.ENV='SOMETHING' THEN
END IF;
But, if the other developer doesn't assign a value for the global variable, i am getting an error like this:
FRM-40815: Variable GLOBAL.ENV does not exists
So, i need to know whether the GLOBAL.ENV already exists before using it in my form.
That is, i need to do like this:
IF (code to check whether GLOBAL.ENV exists ) then
use GLOBAL.ENV
ELSE
Assign a default value to GLOBAL.ENV
END IF;
Thanks for your time...Thank you very much...
I used DEFAULT_VALUE('def val','GLOBAL.ENV');
Now the problem is solved.
Maybe you are looking for
-
Exception while deploying webservice to weblogic 10.3.6
Hi i am facing following exception while deploying ear file to weblogic. the same ear files was working in weblogic 9.2 bundle of thanks for your help <Error> <Deployer> <BEA-149265> <Failure occ urred in the execution of deployment request with ID '
-
Setting Variables to embedded SWF in Director
I have a print button on screen at the end of a test within my director project. Once the user completes they are able to print there results. I have a certificate created in Flash publised using player 7 AS2 which is suppose to recieve varibles and
-
I know it is said that you should, but can someone explain to me the benefits of having seperate domains for servers and accounts?
-
SSL CA Certificate Chain not available.
Hey Everyone, I've got a Cisco 851 running IOS12.3. I'm trying to install a SSL Certificate but after following all the instructions and installing a CA certificate I'm not getting the full chain of authority in a browser just the devices certificate
-
Safari not opening certain pages
Hey Whenever I log onto my bank's website the web address appears in the window as if the page has loaded but the page onto which I typed my login remains on the screen and the whole page freezes as though I had not hit "continue". It happens more f