Incompletion Message in EXIT_SAPMM06E_012 - no metafield mapping
Hello,
we have implemented the enhancement MM06E005. Within this enhancement, a new screen for the purchase order item with one field was created. For one vendor, this field is mandatory.
Therefore, we implemented a code in EXIT_SAPMM06E_012 which checks the field and issues an error message when checking the PO or when trying to save in case the field is empty.
All this works fine except one thing: We were not able to find the place where we could map our customer field to a metafield of type group MMMFS. In this type group, there are metafields for foreseen (e.g. mmmfd_cust_01 to mmmfd_cust_10), but the mapping of the field to the metafield needs to done somewhere. If you do not map the field, you are not able to jump automatically to the customer field when the system tells you that you need to fill this field.
Can anybody help me here? Where and how can i map my field to the metafield?
Best Regards
JA
We are also using the enhancement MM06E005 and we were also not able to link the customer field with a metafield. If anybody has a solution here, I would be happy also.
Thanks,
Christian
Similar Messages
-
Message Split comes first to Mapping !
Hi to all,
Can anyone kindly tell me the exact reason as why the Message Split come first before Mapping in the pipeline steps of Integration sever. Thanks in advance.Hi,
At runtime, the individual messages (for the individual items) are calculated in the mapping step. First, the individual messages are grouped into a bulk message. Then, the bulk message is transferred to the Adapter Engine. The Adapter Engine then splits the bulk message up into the individual messages
The header of the individual messages contains the relevant receiver interface. It is based on the definition of the multi-mapping. Note that the receiver interfaces of the individual messages may be different. The receiver interface of the bulk message is always InterfaceCollection (namespace http://sap.com/xi/XI/System).
If the message split only results in one message, the original message structure remains the same. In this case, a bulk message containing just one individual message is not created. -
Struts - Firfefox messages: No input attribute for mapping path /editNxtMod
Hi!
I'd like to create an admin application which is based upon a simple database table. The list shows already, but the detail of selected record doesn't. When I click to a record, the Firefox writes "No input attribute for mapping path /editNxtModuls". What does it mean? Maybe bad configuration files?
Please help me!
Thank Yoy!
Here my code:
<struts-config>
<data-sources />
<form-beans>
<form-bean name="NxtModulsForm" type="forms.NxtModulsForm" />
</form-beans>
<global-exceptions />
<global-forwards>
<forward name="error" path="/error.jsp" />
</global-forwards>
<action-mappings>
<action input="/index.jsp" path="/listNxtModuls"
type="actions.ListNxtModulsAction">
<forward name="list" path="/NxtModuls/list.jsp" />
</action>
<action name="NxtModulsForm"
path="/editNxtModuls" scope="request"
type="actions.EditNxtModulsAction" validate="true">
<forward name="edit" path="/NxtModuls/edit.jsp" />
</action>
<action path="/saveNxtModuls"
type="actions.SaveNxtModulsAction" />
<action input="/NxtModuls/edit.jsp" name="NxtModulsForm"
path="/processNxtModuls">
<forward name="save" path="/saveNxtModuls.do" />
<forward name="cancel" path="/cancelNxtModuls.do" />
</action>
<action path="/cancelNxtModuls"
type="actions.CancelNxtModulsAction" />
</action-mappings>
<controller />
<message-resources parameter="resources.application" />
</struts-config>
*****************list.jsp*************
<td> <a href="editNxtModuls.do?modul_id=<bean:write name="nxtmoduls" property="modul_id"/>">
<bean:write name="nxtmoduls" property="modul_id"/>
<a/>
</td>
*****************edit.jsp*************
<html>
<h2>Edit</h2>
<html:errors/>
<body>
<html:form action="processNxtModuls.do">
<table border="1">
<tr>
<td>Modul name: </td>
<td><html:text property="modul_name" size="20" maxlength="20" /></td>
</tr>
<tr>
<td>Synonym name: </td>
<td><html:text property="synonym_name" size="20" maxlength="20" /></td>
</tr>
</table>
<html:submit value="Save" onclick="go('saveNxtModuls')"/>
<html:submit value="Cancel" onclick="go('cancelNxtModuls')"/>
</html:form>
</body>
</html>
*********************action******************
public class EditNxtModulsAction extends CommonAction {
public EditNxtModulsAction() {
@Override
public ActionForward commonExecute(ActionMapping mapping, ActionForm form,
HttpServletRequest request, HttpServletResponse response) throws Exception {
NxtModulsForm myForm = (NxtModulsForm)form;
try {
if (request.getParameter("modul_id") == null) {
throw new OwnException("The modul_id parameter was not returned!");
Long ModulId;
try {
ModulId = new Long(request.getParameter("modul_id"));
catch(Exception e) {
throw new OwnException("The modul_id parameter is not a number!");
NxtModulsBean OneRecord = new NxtModulsBean();
OneRecord = myManager.getRecord(ModulId);
myForm.setModul_name(OneRecord.getModul_name());
myForm.setSynonym_name(OneRecord.getSynonym_name());
catch(OwnException e) {
System.out.println(e);
myErrors.add("label",new ActionError("error.get_record_failed"));
saveErrors(request, myErrors);
mapping.findForward("error");
return mapping.findForward("edit");
}The config file looks ok to me.
The Action looks like you aren't taking full advantage of Struts.
You shouldn't have to call request.getParameter() - you should define an action form which picks up the parameters, and does the validations/conversions for you.
Maybe try this:
<html:link action="/editNxtModuls" paramId="modul_id" paramName="nxtmoduls" paramProperty="modul_id" /><bean:write name="nxtmoduls" property="modul_id"/>
</html:link>Edit: Reads error message
No input attribute for mapping path /editNxtModuls
This means that the form validation for this action failed, and it is attempting to return control to the sending page so that you can fix the error.
Check the forms.NxtModulsForm validate() method to see if validation would pass/fail.
The fix would be to put an "input" attribute into the action
<action name="NxtModulsForm"
path="/editNxtModuls"
scope="request"
type="actions.EditNxtModulsAction"
validate="true"
input = "list.jsp">
<forward name="edit" path="/NxtModuls/edit.jsp" />
</action>
Cheers,
evnafets -
Global official numbering: Input parameter incomplete Message no. 8A770
Dear Sir,
the following error is showing "Global official numbering: Input parameter incomplete Message no. 8A770" during the depot Billing.
even i created J1Ij which is working properply.
Moreover tht i have done a scenario with same material and same customer in excisbale plant where no error are throwing.
Thanks
Shibu ChandranCheck this thread
[error when creating delivery referenced by STO doc. from vl10b|error when creating delivery referenced by STO doc. from vl10b;
G. Lakshmipathi -
Quiz options "Show Incomplete Message"
I am developing a scored assessment in my Captivate tutorial.
If I check the box to "Show Incomplete Message," the message only
displays when the user clicks Submit w/o answering the question.
The user can still page forward and not answer the question (the
incomplete message does not appear in this case).
Is there a way to suppress the page forward button on a
scored quiz screen and just have the Submit button jump to the next
page? - OR - is there a way to display the incomplete message if
the user pages forward without answering the question?
Thanks,
Carol P.Hi Carol,
I think the only way to force the "Incomplete" message is to
require the user to click the Submit button to proceed.
This implies that the playbar is turned off somehow.
Consider publishing your quiz as a separate file with the
playbar turned off for the entire file (that's how I do it when the
user is required to answer every question). This does mean adding
your own "Next" buttons at times, but it also avoids issues with
the user having random navigation control.
Or, you can look into using one of the widgets created by
Paul Dewhurst, who has a fabulous collection of add-ons for
Captivate at his website.
Here's a link to one that selectively hides/shows the
playbar, but I highly recommend you poke around and see what else
Paul has to offer:
http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=26&Itemid=29 -
TS3992 Backup incomplete message?
I got a backup incomplete message on my first back up attempt anyone know what to do?
On your device go to Settings>iCloud>Storage and Backup>Manage Storage and then select your device. You can then see how much space each app requires and turn the back up off for individual apps. It is most likely the camera roll on your device that requires the most storage space.
Photo Stream does not count towards your storage space -
Restoration incomplete message after factory restore
After performing a factory restore I am getting the following mesage. Restoration Incomplete . I have retried full factory and system image restore multiple times and after it completes and the computer restarts the restoration incomplete message comes back. Here is what it says when click on the details button.There might be unexpected reboot during factory update. The process will cause CTO panic because the image might not be normal. and then it states the time.The computer is out of warenty and I do not have factory recovery disk and HP says none are availabe from them. I can axcess the full start up menu including F10 Bios Setup. Any help will be greatly appreciated. Thanks Robert Fuller
Hi Rod Good luck on that one, I did not even get to a recovery manager to start with.I ended up formatting the HDD and reloading with with our Win7 Pro install disc. I used the license I use for my desktop and that sorted my issue. No more problem.
-
I'm getting an iPhoto incomplete message when I try to open my iPhoto.
I'm now getting an error message that says, "You can't open the application iPhoto because it may be damaged or incomplete." The icon disappeared out of Launcher, and in my Applications folder, there's a circle with a line through it over the iPhoto icon. It's not a photos problem; it's an application problem. I purchased the latest iPhoto last summer from the App Store, and on my iMac, it shows that, but it won't let me download it again to my computer. Help!
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Two Message Mappings in one Interface Mapping without using BPM
Hello Experts,
I have this scenario, please help me
I have to execute two mappings of which one is a java mapping and then the other is a message mapping sequentially.
The mapping is something like below
Message1 -> (java Mapping) -> Message2
Message2
Message1 -> (Message Mapping) -> Message3
Based on the value in Message2 I have to map Message1 to Message3
I am not an expert in java so please give me options that doesn't involve changing of java code.
The above 2 mappings have to be implemented in only one interface mapping.
Suggestions please.Hi Ravi!
You say message2 dependes on message1 and message3 is mapped from message1 but using also values from message2? But this means, that whole mapping dependes only on message1!
So change your mapping and use the one not based on message2, but message1. Put these as a condition in interface determination and based on these values use the correct mapping.
Peter
p.s. I'm not sure, if I got your requirement correctly, but your target message dependes only on message1 (since message2 dependes on it too), so this whole mapping can be done as 1. Unfortunately, you'll probably have to change your java part. Bur definetely, Raj is right.
Edited by: Peter Jarunek on Feb 20, 2008 5:36 PM -
Handling Multiple Error Messages through EXIT_SAPMM06E_012 for ME28
Dear Team,
After Executing ME28, system will give List of PO's that are to be Released . User will select Multiple PO's and
Press Release button in Application toolbar. once it is relased, User will press save Icon for all released PO's.
Once Save icon is presed, I need to do Validation for Multiple PO's in the user Exit EXIT_SAPMM06E_012 and capture my
ErrorMessages for all Released PO's for which Validation fails.
Here in the given user Exit, one PO will be processed at a time as PO is defined as Import Parameter but it will handle all PO's
and give the output in status bar saying 'Relased Saved' for all PO's which succesfully gonethrough.
once we execute ME28, system is showing list output with PO's to be Released(As system is handling with Write statments). In this case, we dont have scenario of PBO and PAI Modules( where user can correct error if any validation fails) like we have for ME22,etc.
I have Written simpel Error Message in the User Exit.
once i tried to trigger my user exit by Releasing and Saving with One PO, Error Message is displayed ( as information Message
appears) and if i Press Exit button in Error Message, it is coming out of Transaction.
Is there any Possibilty to Handle Multiple Error Messages ( in my case for Valdiation Failed Po's) in ME28 ,after Releasing and Saving , and also user should not come out of Transaction once Error Messages are Displayed.
Thanks and Regards
SureshHi Suresh,
there is a tekpo table to handle all po items. you can put it in loop and do validations.
if any errors through, there may be a ex_messages table of type bapiret2.
or
try like this: MESSAGE E368(00) WITH TEXT-001 TEXT-002.
thanks
srinu
Edited by: srinu rao on Sep 22, 2009 3:43 AM -
Automatically Cancel Message after error detected in Mapping
Hello experts,
I have a message mapping that does some validation on data from sender (file) and if not valid, the mapping errors out as I generate an alert. Production support then manually cancels the message from SXMB_MONI.
My question is: Is there a way to cancel the message automatically as soon as the alert is generated instead of the additional manual step for Production support personnel to do it.
Thanks
JBHi,
>any person looking at this thread would have expected you to respond to the issue/problem discussed,
in case you didn't notice I gave you the best answer I got - "it's not possible in standard" - short, maybe sad but true - all the rest is development
which is possible and you can do EVERYTHING with it as you may or may not know
>speculate on which name or nickname appeared on it
don't know if you noticed but in case you didn't I'm a moderator of this forum
so I try to keep it both: 1) clean and 2) healthy which means:
1) if there is someone who's is affraid to tell his own name it means two things for me:
a) either he/she was blocked on forums and come back with a different name
b) is so highly valued prof (in his mind) that wishes not to show his real name
as others might find out that he/she does not know something
in both cases I'm always very carefull with such forum members
(only as a moderator) as I cannot expect anything good from it
which is actually true in your case as you don't expect our forum
*rules of engagement * for example:
Step 4: Thank Others by Giving Points
and you never gave points .... none of your
34 questions was ever awarded by you with even one point
so who is playing fair ?
2)
if someone who has a funny nick cannot understand a little joke
then I honestly don't care and it has nothing to do with my arrogance
>your response shows your prejudiced approach and a sense of arrogance.
please, let other people who read this judge on that, ok?
and let's not continue this anymore
anyway good luck in your attitudes too
Regards,
Michal Krawczyk -
I go to Google Maps and try to enter address in search bar.
Message pops up: "Still loading... Slow? Use the troubleshooting guide or basic HTML"
Nothing ever comes up -- map does not load.
If I append "q?=us" to url (below) (without quotes), it works.&q=us does not work.
Starting firefox in safe mode does not work
Map loads but entire page except main menu is non interactive.
"Still loading... Slow? Use the troubleshooting guide or basic HTML"
It comes up on google.com.au but not google.com
It happened after they added the new privacy popup with with MapGL also being added.
Disabling all cookies with Web Developer or browsing in private mode works but when settings are put back to normal it stops working.
I deleted all cookies and cleared cache but that did not help. Strange that clearing cookies did not solve the problem because disabling cookies works.
I tested with another browser and it works... but I want firefox forever. -
Fpga -Re:ERROR MESSAGE INDICATIN X-FLOW PROGRAM MAP RETURNED ERROR CODE
sir,
I am working on a project using ni rio-7831R uaing labview fpga1.1, on compiling on to the device i am encountering a error giving follow message:
Problem encountered during the packing phase.
ERROR:Xflow - Program map returned error code 2. Aborting flow execution...
so please, recommend me the action so that i could compile my project without error.
vamsiHi Vamsi,
The information you are looking for is in this KB: Why Does My FPGA Compile Give An OVERMAPPED Error When Compiling? < http://digital.ni.com/public.nsf/websearch/060BA89FE3A0119E48256E850048FFFE?OpenDocument >
I think you are running out of space on your FPGA. You can either purchase a 3 million gate fpga(7833R) or Optimize your code to use less space. Have a great day!
Regards,
Prashanth -
Is it a good idea to use BRE for Message transformation instead of using Maps?
We are thinking about a scenario of constructing multiple versions of hl7 messages from a source schema. We thought of constructing BRE vocabulary for both source schema and HL7 2.6 schema and then use policy per version with bunch of rules for
transforming the source schema to hl7 schema. We think this will provide more maintainability to tackle future changes but in other way this seems a over kill. Any suggestions or opinions would be highly appreciated. Thanks youIf you are using BizTalk 2010 and above, you can think of using BRE pipeline framework.
Pls read the description below and see if this fits into your requirement.
https://brepipelineframework.codeplex.com/
http://adventuresinsidethemessagebox.wordpress.com/2014/08/16/using-the-bre-pipeline-framework-to-execute-maps-dynamically/
Alternatively, refer:
https://social.msdn.microsoft.com/Forums/en-US/043527f4-cb1f-47b2-ab82-e412c149b9b3/dynamic-mapping-in-biztalk-using-bre?forum=biztalkgeneral
Rachit -
Envy 6m restoratio​n incomplete message
I have searched and I have tried several options but to no avail. Since buying the PC in March of last year we have had several 'blue screens of death' and the recovery USB has worked every time. We don't know why it keeps freezing, and now it has rejected the recovery. We go back to factory specs and it goes all the way through the process, the top message says 'recovery complete' and right below it says 'recovery incomplete'. I've changed the bios to Legacy hoping it will let it restore that way. It refuses to let it start from Windows 7 disk ( I know why now...) and I can't find any way to 'Format C'. Microsoft forums say it is a Norton glitch, but there is no way to access that to turn off Norton or remove it from the recovery that I know of. Is there a way to use another pc to get into the USB root and remove norton all together from the recovery? I really don't want to pay for recovery disks to recover an issue that is Microsofts fault... PS calling the HP hotline did no good... they said they wanted 399$ to take control of the other pc and reprogram the USB... gosh, if I had that much to burn I'd go buy a surface or something cheap, and I bet it would work better than the Envy 6 with win8.... I will update here if changing Legacy in bios worked... this still doesn't fix the issue of the constant freezing to blue screen...or explain it... Thank you for all your help.
Well for anyone who wants to know... The bios trick and sarting from start options and USB recovery worked... in the recovery norton is automatic... and according to the microsoft post I read it may be the reason for the blue screen of death. We will try and rip it out to the core, or at least turn off the tamper protection... any suggestions for that is appreciated...
Maybe you are looking for
-
Hi, I just bought Lumia 925. Installed my country map with latest version Here maps. I've problem to login to Nokia account, either login by mobile network or WiFi it said network problem. I tried so many time, it same result. For your info I've succ
-
I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happ
-
One static JComponent (JLabel) in multiple place ?
i have one static JComponent (eg: public static JLabel). i like to add this component in multiple place. And i want to see the component visible in multiple place at same time. how to do it ?
-
Somehow ASK now comes up on every search, How do I get rid of it?
i KEPT GETTING A MESSAGE THAT SOME SECURITY ISSUE NEEDED UPDATING. WHEN I ALLOWED IT TO MAKE CHANGES IN MY PC. AND RETURNED TO FIREFOX NOW ANY SEARCH I MAKE THE ASK TOOL BAR APPEARS
-
Where is control panel on imac?
Am trying to uninstall a couple of programs, just switched Mac from PC for 15 years. Cannot find where start menu is, control panel etc., in order to remove programs. Thanks for your help.